Uniden XC3510 инструкция обслуживания

Table of Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Included with the . . . [...]

Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduc e the risk of fire, electr ical shock, and injury to persons : 1. Read and understand all instruc tions. 2. Follow all warnings and instr uctions marked on the produc t. 3. Unplug this product from the wall outlet bef[...]

12. Unplug this product from the wall outlet and r efer servicing to qualified service personnel under the following conditions: A. When the power supply cor d is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to r ain or water. D. If the product does not operate normally when following the ope[...]

Introduction Congratulations on your pur chase of the Uniden Cordless Telephone. The is des igned to exacting standards whic h provide reliability, long life, and outs tanding performance. Note: This series of Uniden phones is av ailable in designer colors, and these colors are des ignated by different model numbers. Accordingly, this manual desc r[...]

Included with the XC3510 If any are missing or damaged, do not contact the place of purchas e. Instead contact Uniden Customer Serv ice at: (800) 297-1023, 8:00 am to 5:00 pm, Eastern Standard Time, Monday through F riday. Q Handset Base Unit AC Adapter Long Telephone Cord Rechargable Battery Short Telephone Cord ® Operating Guide OMXC3545 Other P[...]

Important Electrical Considerations Unplug all electrical appliances when you know an electrical s torm is approaching. Lightning can pass through your household wiring and damage any device connec ted to it. Your phone is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm. Cautio n: Changes or modificat[...]

Radio Inte rfe re nce Radio interference may oc casionally cause buzzing and humming in y our cordless Hands et, or clicking noises in the Base Unit. This interference is caused by exter nal sources such as TV, refriger ator, vacuum c leaner, fluorescent lighting, or electric al storm. Your unit is NOT DEFECTIVE. If these noises continue and ar e t[...]

Installation Selecting a Location Before choosing a location for y our new phone, there are some important guidelines you should cons ider: • The location should be clos e to both a phone jack and continuous power outlet. (A continuous power outlet is an AC outlet which does not have a switch to interrupt its power.) • Keep the Base Unit and Ha[...]

Connecting the Telephone Cords Consider these safety guidelines before connec ting the telephone cords: CAUTION: • Never install telephone wiring dur ing a lightning storm. • Never touch uninsulated telephone wir es or terminals unless the telephone line has been disconnected. • Use caution when installing or modifying telephone lines. Applyi[...]

Adapter Safety Feature The AC adapter furnished with this phone may be equipped with a polarized line plug — a plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you ar e unable to insert the plug fully into the outlet, try rever sing the plug. Note: If you c annot plug the AC adapter into the ou[...]

2. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. 3. Place the AC Adapter cord inside the molded channel. 4. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. 11[...]

5. Plug the other end of the cord into the telephone jack on the wall. 6. Plug the AC Adapter into a standard 120V AC wall outlet. 12[...]

Placement of the Handset The unique design of your phone allows you to place the Handset on the Base Unit either facedown or in an upright pos ition. The battery is char ged in either position. Wall Install ation Standard Wall Plate Mountin g These phones are des igned to be mounted on a standard AT&T or GTE wall plate. 1. Plug the AC Adapter i[...]

2. Place the AC Adapter cord inside the molded channel. 3. Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit. 4. Place the telephone cord inside the molded channel on the bottom of the Base Unit. Then plug the other end of the telephone cord into the modular jack on the wall. 14[...]

5. Place the Base Unit on the posts of the wall plate and push down until it’s firmly seated. 6. Plug the AC Adapter into a standard 120V AC wall outlet. 15[...]

Direct Wal l Mounting If you do not have a standard wall plate, y ou can mount your phone directly on a wall. Before mounting your phone consider the following: • Select a location away from electr ical cables, pipes, or other items behind the mounting location that could cause a hazar d when inserting screws into the wall. • Make sur e the scr[...]

3. Place the AC Adapter cord inside the molded channel. 4. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. 5. Place the cord inside the molded channel on the bottom of the Base Unit. 17[...]

6. Place the Base Unit on the screws and push down until it’s firmly seated. 7. Plug the other end of the telephone line cord into the wall jack. 8. Plug the AC Adapter into a standard 120V AC wall outlet. 18[...]

Setting t he Handset Retainer The handset retainer holds the Handset in place if your phone is mounted on a wall. The steps below des cribe how to remove and replace the retainer s o that the tab faces up. 1. Push up on the Handset retainer on the Base Unit, and slide the tab out. 2. Flip the retainer over so the tab faces up. 19[...]

3. Put the retainer back into its slot on the Base Unit. 4. Push down on the Handset retainer until it snaps into place. 20[...]

Setting up your Phone Extending the Antenna Before using your phone, be sure to raise its antenna to the vertical position. Install ing the Handset Batte ry Pack 1. Press in on the Battery Cover Release. WARNING ! Always Install Battery Cable with Black Wire closest to the left RED BLK NOTE 21[...]

2. Slide the battery compartment cover down. 3. Align the plastic connector of the Nickel-Cadmium battery pack with its soc ket and plug it in. 4. Place the battery pack ins ide the battery compartment, and slide the battery cov er back on. Note: The built- in Memory Backup feature allows up to 10 minutes to disconnect the old battery pac k and ins[...]

Cleaning the Batte ry Contacts To maintain a good charge, it is impor tant to clean all charging contacts on the Handset and Base Unit about once a month. Use a pencil er aser or other contact cleaner. Do no t use any liquids or s olvents. IN USE CHARGE PAGE / FIND Extend A Phone •• H Q SERIES Contacts Contacts (On Bottom) BATT LOW TALK TALK CH[...]

Charging the Batter y Pack Initial Battery Char ging The rechargeable Nic kel-Cadmium battery pack must be fully char ged before using your phone for the first time. We recommend that the battery pack charge for approx imately 15-20 hours, without interr uption, before plugging the phone line into your new phone. 1. Place the Handset on the Base Un[...]

2. Make sure the CHARGE LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in, and that the Handset is making good contact with the Base Unit charging contacts . Continuous Battery Chargi ng For the best battery performance, return the Hands et to the Base Unit at the end of the day. This keeps the battery fully c h[...]

Low Batter y Indicator When the Battery Pack in the Handset is very low and needs to be charged, the TALK/BAT T LOW LED flashes. If the TALK/BAT T LOW LED begins to flash, the phone is programmed to eliminate its functions to sav e power. The table below describes what to do to return your phone to nor mal operation. During a Call In Standby Mod e [...]

Setting the Tone/P ulse Sw itch Be sure the TONE/PULSE switch is in the TONE position. Note: Most phone s ystems are Tone dialing. Check with y our local phone company if you are not sur e whether your s ystem is Tone or Pulse dialing. Adjusting Ri nger Contr ols To adjust the ringer v olume of your Hands et, press when the phone is not in use. TON[...]

You can also select one of two different ringer tones for the Handset. Press to selec t a different ringer tone when the phone is not in use. To adjust the receiv er volume, press while you are on a call. MEM FLASH R.TONE R.VOL RD L/P VOLUME 0 OPER TONE 1 2 3 Handset Ringer Tone Select Button MEM FLASH R.TONE R.VOL RD L/P VOLUME 0 OPER TONE 1 2 3 H[...]

Automatic Digi tal Code Securi ty Many cordless telephones operate similar ly and on the same frequency. Without digital code security, another Handset could make calls us ing your Base Unit and telephone line. To avoid unauthorized c alls on your phone, a Digital Code feature was added to all phones. This Digital Code is shared only between the Ha[...]

If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Hands et will not function. To establish communication between the Hands et and Base Unit: 1. Remove the Handset from the Base Unit (if it is on the Base Unit). 2. Restore power to the Base Unit, and place the Handset back on the B[...]

Using your XC3510 Phone Maki ng and Rece iving Calls The following features of the phones are different depending on the Handset’s location when you mak e or receive a call. HANDSET ON BASE HANDSET OFF BASE ANSWER CALL Pick up Handset (AutoTalk) Press MAKE CALL 1) Pick up Handset 2) Press 3) Listen for dial tone 4) Dial the number 1) Press 2) Lis[...]

Changing Channe ls, Fla sh, and Page /Fi nd To change channels or access call waiting while the phone is in use, or to use the 1-way page to locate the Hands et, follow these steps: PRESS THESE KEYS YOU WILL HEAR CHANGING CHANNELS Press H Note: Change channels to help eliminate background noise. A click similar to when is press ed. There may be a b[...]

Programming your Phone All programming functions must be c ompleted when your phone is in the standby mode. The progr amming keys will not function while you ar e on the phone. Storing a Number in Memor y 1. Remove the Handset from the Base Unit. 2. Press . The TALK/BATT LOW LED blinks. 3. Enter the number you want to store (up to 16 digits) . 5551[...]

4. If a pause is needed during dialing to access a long distance s ervice, press . 9R 5551212 Note: The button counts as one digit. Pressing more than once increases the length of the paus e between numbers. 5. Press again. 6. Enter the memory location (0-9). A tone indicates that the number is stored. Q 34[...]

Storing a Tone/P uls e Number With a Pulse Dial System If your phone is set up for pulse dialing, you can store a mix ed mode number so that you can easily access long distance ser vices. 1. Remove Handset from the Base Unit. 2. Press . The TALK/BATT LOW LED blinks. 3. Enter the number to be dialed in pulse mode. 5551212 BATT LOW TALK TALK CHANNEL [...]

4. Press TONE on the Handset. 5. Enter the number to be dialed in tone mode. 3300 6. If a pause is needed during dialing to access a long distance s ervice, press . R 3300 Note: The button counts as one digit. Pressing more than once increases the length of the paus e between numbers. 7. Press again. 8. Enter the memory location (0-9). A tone indic[...]

Storing O ne-Touch Di aling Numbe rs 1. Remove the Handset from the Base Unit. 2. Press . The TALK/BATT LOW LED blinks. 3. Enter the number you want to store (up to 16 digits) . 5551212 4. If a pause is needed during dialing to access a long distance s ervice, press . 9R 5551212 Note: The button counts as one digit. Pressing more than once increase[...]

5. Press again. 6. Now press the One T ouch dialing button ( 1 , 2 , or 3 ) you want to program. A tone indicates that the number is stored. Dialing a Stor ed Numbe r To dial a number previous ly stored in memory, follow thes e steps: MEMORY ONE TOUCH KEYS Remove the Handset from the Base Unit. Remove the Handset from the Base Unit. Press Press Pre[...]

Erasi ng a Store d Number To erase a number pr eviously stored in a memor y location (0- 9) or in One Touch memory, follow thes e steps: MEMORY ONE TOUCH KEYS Remove the Handset from the Base Unit. Remove the Handset fr om the Base Unit. Press twice . Press twice . Press the memory loc ation number (0-9). Press the One Touch dialing button you want[...]

Troubleshooting If your cordless Telephone is not per forming to your expectations, please tr y these simple steps. If y ou are still unable to resolve the problems, contact Uniden Cus tomer Service at (800) 297- 1023, 8:00 a.m. to 5:00 p.m. EST, Monday through Friday. Problem Suggest ion Charge light won’t come on when Handset is placed in Bas e[...]

Specifications General – The c omplies with FCC Part 15 and 68 Frequency Contr ol Crystal controlled trans mission Modulation FM Operating Temperatur e – 10 ° to 50 ° C Base Unit Receive Frequenc y 48.76 to 49.99 MHz (25 Channels) Transmit Fr equency 43.72 to 46.97 MHz (25 Channels) Power Requirements 120V AC 60 Hz ± 3V AC Size 7 3 4 “ (W)[...]

XC351 0 Seri es Cordless Telephones UDZZ01361Z Z Operatin g Gu id e ® Q[...]

PRECA UTIONS Before yo u read anything el se, please observe the foll owing: WARNING! Unide n A meric a Corp ora tion DOES NOT repres ent this u nit to b e wat erproo f. To reduc e th e ris k of f ire, elec trica l sh ock, o r dam age to the uni t, DO NOT exp ose this u nit to ra in or moi sture . RECHARGEABLE NICKEL -CADMIUM BATTERY WARNING This e[...]

Handset Controls and Keys BATT LOW TALK TALK CHANNEL MEM R.TONE R.VOL RD L/P FLASH VOLUME 1 2 3 ABC DEF 4 5 6 JKL MNO GHI 7 8 9 TUV WXY PRS 0 OPER TONE 2 3 5 6 8 13 11 12 10 9 7 4 1 2 3 1 RING ON BA TT SA VE 1. Anten na 2. Talk/Batt ery Low Indicat or 3. Talk But ton 4. Numeric Keypad 5. Tone But ton 6. Memo ry Programm ing Butt on 7. Flash Bu tton[...]

Base Unit Controls and Keys IN USE CHARGE PAGE / FIND Extend A Phone •• H Q SERIES 12 3 4 5 7 6 8 1. Tone/Pulse Switch 5. Base Unit An tenna 2. Telepho ne Line Jack 6. In Use LED 3. DC Power Jack 7. Charge LED 4. Handset Ret ainer 8. Page/Find Butto n[...]

One Year Limited Warranty WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants , for one year, to the original retail owner, this Uniden Product to be free from defec ts in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: T his warranty to the original us er [...]

©1995 Uniden America Corporation. All rights r eserved. Printed in Hong Kong Cov ered under one or more of the f ollowing U .S . patents: 4,511,761 4,523,058 4,595,795 4,797,916 ®[...]