Univex TRAX353 инструкция обслуживания

TRAX353 In-Car Na viga tion OWNER’S MANU AL[...]

P age 2 Contents What Do I Do First? 6 Make Sure These Items Arrived in the Box 6 Plug it in 7 How Do I Put It in My Car? 8 Safety considerations 8 Attaching the windshield mount 9 Adjusting the windshield mount 10 Mounting on the windshield 11 Mounting on a at surface 12 How Do I Use It? 14 1: W arnings and Safety Information 14 2: Getting star[...]

P age 3 Returning to normal navigation 35 Selected location (Cursor) 36 Original position in the Cursor menu 36 Daytime and night colour schemes 37 Colour scheme in tunnels 37 Route calculation and recalculation 37 Itinerary 38 T rack Logs 39 Route demonstration 40 POI(Points of Interest) 40 Saving POI 41 Managing POI 41 Road Safety Cameras 41 Savi[...]

P age 4 Creating a multi-point route (inserting a via point) 61 Creating a multi-point route (appending a new destination) 62 Editing the route 62 View the whole route on the map (Fit-to-Screen) 63 W atching the simulation of the route 64 Enabling Safety Mode 64 Pausing the active route 65 Deleting the next via point from the route 65 Deleting the [...]

P age 5 Route menu 93 Manage menu 94 Manage saved route 95 Manage History 95 Manage T rack Logs 96 Manage Favourites 97 Manage POIs 97 Managed Saved Search Criteria 99 User Data management 100 Settings Menu 101 Map Screen settings 102 Sound settings 103 Route Planning options 104 Regional settings 106 Navigation settings 107 W arning settings 109 G[...]

P age 6 What Do I Do First? Make Sure These Items Arrived in the Box If any thi ng lis ted he re is mis sing or da mag ed, co nta ct you r p lac e o f purchase immediately . TRAX353 GPS n A v i G A T i o n d e v i c e Press the power ► button momentarily to turn the screen off (or back on); the device stays on and can still give directions. Press[...]

P age 7 What Do I Do First? i n c l u d e d A c c e S S o R i e S Plug it in ► Connect the power adapter to the power connector on the lower right side of the device. Plug the other end into your car ’s cigarette lighter ► (or any standard 12 V DC outlet). Only use the power adapter that came with your ► device. Any other adapter might dama[...]

P age 8 How Do I Put It in My Car? Safety considerations Don’t install any device where it will block your view (including your ► mirrors!) while you’re driving. Keep your attention on the road! ► Don’t try to operate or focus on any device while you’re driving. If you have to concentrate on a device, pull off the road for a few minutes[...]

P age 9 How Do I Put It in My Car? Attaching the windshield mount Inser t the bracket hooks into the notches on the bottom of the device . 1 ...and snap the top hook into the notch on top of the device . Rotate the bracket head up ... 3 2[...]

P age 10 How Do I Put It in My Car? A d j u S T i n G T h e W i n d S h i e l d m o u n T The adjustment lock keeps both the bracket and the suction cup ► locked into place. Lift the adjustment lock to change the position of the device. The suction cup joint pivots front to back, and the bracket joint pivots ► up, down, right and left, any just[...]

P age 11 How Do I Put It in My Car? Mounting on the windshield Make sure the device does not block your view of the road or your mirrors. Once you decide where you want the device, hold the suction cup in that position, then adjust the mount so you have the best view of the device. 1) Pressthesuctioncupatagainstthewindshield[...]

P age 12 How Do I Put It in My Car? Mounting on a at surface If you want to put the device somewhere other than your windshield (or anywhere the suction cup won’t stick), you can use the anchor disk. Once you glue the anchor disk down, the windshield mount installs inside the disk just like it does on glass. When you’re deciding where to put[...]

P age 13 How Do I Put It in My Car? Hold the disk 4) exactly above the spot where you want to glue it down. (Remember , the glue is designed to be permanent!) Pressthediskrmlyagainstthesurface.Pushdownalongthe 5) edges, too, so that every part of the disk makes good contact with the surface. Before you install th[...]

P age 14 How Do I Use It? 1: W arnings and Safety information TRAX353isanavigationsystemthathelpsyoundyourwaytoyour destination with a connected GPS receiver . TRAX353 does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If[...]

P age 15 How Do I Use It? T asks Instructions Double tapping the screen Y ou do not need to tap the screen twice for any action. With buttons and controls, a single tap is enough. T apping and holding the screen Y ou do not need this to access the basic navigation functions. T ap and keep pressing the following buttons to reach extra functions: •[...]

P age 16 How Do I Use It? Gestures (drag&drop) Y ou do not need gestures to access the basic navigation features. Y ou need to drag and drop the screen only in cases like: Moving the handle on a slider . Moving the map: grab the map, and move it in the desired direction. ShortcuttoopentheMapscreen:slideyournger fro[...]

P age 17 How Do I Use It? The typical way of using TRAX353 is to select a destination, and start navigating. Y ou can select your destination in the following ways (not all of them are available in Simple mode): • Usetheselectedlocationonthemap(theCursor)(page35). • Enterafulladdressorapart?[...]

P age 18 How Do I Use It? T ype of action A vailable in Simple mode A vailable in Advanced mode Explanation Navigating to a selected map point Y es Y es See page 46 Navigating to a street address Y es Y es See page 46 Navigating to an incomplete address Y es Y es See page 46 Navigating to an intersection Y es Y es See page 52 Navigating to recent d[...]

P age 19 How Do I Use It? Route Planning options Y es Y es See page 104 Regional settings Only language selection Y es See page 106 W arnings No Y es See page 109 Hardware button (Power on/off) Y ou can use TRAX353 mostly by tapping the touch screen. The device has only one hardware button for turning power on or off. When the device is on, pressin[...]

P age 20 How Do I Use It? Icon Shows status information. Some icons also function as a button. T ap them once. List When you need to select from several options, they appear in a list. T urn the page with the and buttons and tap the value that you want. Slider When a feature has several different unnamed values, TRAX353 shows an indicator on a gaug[...]

P age 21 How Do I Use It? Using keyboards Y ou only need to enter letters or numbers in TRAX353 when you cannot avoidit.Y oucantypewithyourngertipsonthefull-screenkeyboards and you can switch between various keyboard layouts, for example ABC, QWERTY , or numerical. T ask Details Switching to another keyboard l[...]

P age 22 How Do I Use It? Using the map The map screen is the most frequently used screen of TRAX353. It can be accessed from the Navigation menu by tapping . For further information about the map screen, see page 69. Checking the details of a map location • Ifyouareinterestedinthedetailsofyourcurrentpositiondu[...]

P age 23 How Do I Use It? 3. For further details, tap to open the Cursor menu. 4. T ap . The address, the coordinate and the list of nearby POIs will be displayed. • ItiseveneasierifyouselectthedesiredpointintheFindmenu.  Then the Cursor menu opens automatically . Y ou only need to tap the button[...]

P age 24 How Do I Use It? Opening/ closing map control buttons T ap this button to show or hide the following map control buttons: •Zoomin/out •Rotateleft/right(3Dmaponly) •T iltup/down(3Dmaponly) •Zoompresetbuttons(2Dmaponly) •T iltandzoompresetbuttons(3D map only[...]

P age 25 How Do I Use It? Rotating left and right Changes the horizontal view angle of the map in 3D mode. When GPS position is available, TRAX353 always rotates the map so its top faces your direction of travel (T rack-U p orientation). Y ou can turn away from T rack-Up with these buttons. If GPS position is available and you have rotated the map,[...]

P age 26 How Do I Use It? Smart Zoom TRAX353 can automatically rotate, scale and tilt the map and give you the optimal view: •Whenyouareapproachingaturn, TRAX353 zooms in and raises the view angle to let you easily recognise your manoeuvre at the next junction. •Ifthenextturnisatadistance, TRAX353[...]

P age 27 How Do I Use It? T ilt and zoom preset buttons (available in Advanced mode only) T ap one of the preset buttons to setthetiltandzoomlevelstox, predenedvalues.SmartZoom is disabled. These buttons are available in 3D mode. T ap&hold any of the buttons to set its value to the current tilt and zoom[...]

P age 28 How Do I Use It? There is no active route in Advanced mode If there is no route to be navigated in Advanced mode, this icon appears intheT urnPrevieweld. T ap this area to open Find. There is no valid GPS position. If an active route exists, and there is no valid GPS position, the view of the sky above you is shown with colo[...]

P age 29 How Do I Use It? Icon Information Details Action There is no valid GPS position If there is no valid GPS position, this symbol appears here. T ap this area to open the GPS Data screen to check the signal status or the connection settings. T rafcrestriction When GPS position is available, but there is no route to be navigated, the tra[...]

P age 30 How Do I Use It? Indicator strip - sounds muted/ enabled - T rack Log recording - not used - Bluetooth status Nothing happens if you tap this area of the screen. The following symbols appear in the Indicator strip: Icon Description The sound output of TRAX353 is muted. The sound output of TRAX353 is enabled. TRAX353 records a T rack log wh[...]

P age 31 How Do I Use It? There is an error in the Bluetooth connection. TRAX353 is connected to a telephone as a handsfree set via Bluetooth. A phone call is in progress over the Bluetooth connection. Thefollowinginformationcanbeseeninthethreedataeldsshownon the map screen. T ap this area to open the T rip[...]

P age 32 How Do I Use It? Distance information There are distance type values that can be shown: •Distanceremainingtoreachthe destination •Distanceremainingtoreachthenext via point •Currentaltitude Thenextareaisacombinedstatuseld.T apthisareatoopentheQui[...]

P age 33 How Do I Use It? Button Action In the active route, uses the Cursor as the start point by replacing the current GPS position (available in Advanced mode only) In the active route, uses the Cursor as the destination by replacing the previous destination In the active route, uses the Cursor as a via point (an intermediate destination) preced[...]

P age 34 How Do I Use It? • While driving without an active route in TRAX353: Smart Zoom will zoom in if you drive slowly and zoom out to the limit set here when you drive at high speed. Enabling Smart Zoom T ap the map to let the map control buttons appear , and then tap to enable Smart Zoom. Fine-tuning Smart Zoom T ap the map to let the map[...]

P age 35 How Do I Use It? Return to normal navigation When GPS position is available, and you have moved the map (the icon is moving or is not even visible), or you have rotated the map in 3D mode, the button appears. T ap it to move the map back to the GPS position and re-enable T rack-up map orientation (automatic map rotation). Even if you move [...]

P age 36 How Do I Use It? Original position in the Cursor menu When the Cursor menu is open, a special icon ( ) shows the Cursor position the menu was opened with. Y ou can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor ( ) appears, and the buttons of the Cursor menu initiate actions for this new location. [...]

P age 37 How Do I Use It? Route calculation and recalculation TRAX353 calculates the route based on your preferences: • Routecalculationmethod:  • Fast  • Short  • Economical  • Easy • V ehicletypes:  • Car  • T axi  • Bus  • Emergencyvehicles  • Bicycl[...]

P age 38 How Do I Use It? Itinerary The Itinerary is the list of the route events, that is, the driving instructions. When you are on the Map screen, you can display the Itinerary in one of the following ways: • T aptheareabetweentheT urnpreviewandthe T raveldata  eldswherethesymbolofthe[...]

P age 39 How Do I Use It? When the map is open with a manoeuvre in the middle: Button Description Zooms in the map. Zooms out the map. , Moves the map to show the previous or next manoeuvre. Opens a screen where you can avoid a part of the route starting from the selected manoeuvre. T rack Logs TRAX353 can log the track that you drive (page 66). A [...]

P age 40 How Do I Use It? route; if you do not want to take that bridge, you can avoid it. Route demonstrations can be started from the Route menu by tapping the (high speed simulation) or the (simulation at normal speed) button. POI (Points of Interest) A pointofinterest(POI)isalocationthatsomeonemightndusefu[...]

P age 41 How Do I Use It? , . Road Safety Cameras The location of a Road Safety Camera is a special POI. They cannot be searched like other POIs, and there is a special proximity warning only for cameras. Y ou can save the Cursor as the location of a Road Safety Camera. Saving Road Safety Cameras T o save the location of a Road Safety Camera, place[...]

P age 42 How Do I Use It? • Ifyouexceedthespeedlimitofthecamera,thefollowingalso happens: • VisibleW arning: A symbolwiththespeedlimitappearsinthecornerof the map (for example: ), • AudibleW arning: A specialalertsoundisplayed. Camera t[...]

P age 43 How Do I Use It? Section control These speed cameras work in pairs, and do not measure your current speed but your average speed between the two speed cameras. Both identify your car and record the exact time you pass them. They use the dif ference between the two points in time to calculate your average speed. TRAX353 warns you when you a[...]

P age 44 How Do I Use It? Symbol Description The camera checks the speed of the direction into which you are driving. The camera checks the speed of the opposite driving direction. The camera checks the speed in both directions on the road. The camera can check the speed in any direction. Speed limit warning Maps sometimes contain information about[...]

P age 45 How Do I Use It? 3: Navigating with TRAX353 Y ou can set up your route in TRAX353 in several ways: • Ifyouneedasimpleroute(aroutewithonlyonedestination, without any intermediate via points), you can select the destination and start navigating to it right away • youcanplanamulti-poin[...]

P age 46 How Do I Use It? Selecting the Cursor as the destination 1. Locate your destination on the map: move and scale the map as needed (page 14). 2. T ap the location that you want to select as your destination. The Cursor ( ) appears. 3. T ap to open the Cursor menu. 4. The map appears with the selected point in the middle. T ap (Simple mode) o[...]

P age 47 How Do I Use It? thesecountries,orchooseanyofthemfromthelistofcountries,velines appear on the screen: The procedure is explained starting from the Navigation menu. 1. T ap the following buttons: (Simple mode), or , (Advanced mode). 2. By def aul t, TRAX35 3 p rop ose s t he cou ntr y , sta te an[...]

P age 48 How Do I Use It? match the string appear in a list.    • T ap to open the list of results before it appears automatically . 4. Pick the settlement from the list. 5. Enter the street name: 1. T ap . 2. Start entering the street name on the keyboard. 3. Get to the list of results:   • Afterenteringacouple[...]

P age 49 How Do I Use It? more times on the same road. If this is the case, after giving the house number , you need to select the appropriate address by the district/suburb information. The procedure is explained starting from the Navigation menu. 1. T ap the following buttons: (Simple mode), or , (Advanced mode). 2. By default, TRAX353 proposes t[...]

P age 50 How Do I Use It?   • Afterenteringacoupleofcharacters,thenamesthat match the string appear in a list.   • T ap to open the list of results before it appears automatically . 4. Pick the street from the list. 5. Enter the house number: 1. T ap . 2. Enter the house number on the keyboard. 3.[...]

P age 51 How Do I Use It? 3. If needed, change the settlement:  • T oselectthesettlementfromthelistofrecentlyusedones,  tap the button.  • T oenteranewsettlement: 1. T ap the button with the name of the settlement, or if you have changed the country/state, tap . 2. Start entering th[...]

P age 52 How Do I Use It? 3. T ap tonishenteringtheaddress. 6. A list appears with the matching addresses. T ap the desired one. 7. The map appears with the selected point in the middle. T ap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. Selecting a[...]

P age 53 How Do I Use It? appears automatically . 4. Pick the settlement from the list. 4. Enter the street name: 1. T ap . 2. Start entering the street name on the keyboard. 3. Get to the list of results:   • Afterenteringacoupleofcharacters,thenamesthat match the string appear in a list.   • T ap?[...]

P age 54 How Do I Use It? The procedure is explained starting from the Navigation menu. 1. T ap the following buttons: (Simple mode), or , (Advanced mode). 2. By default, TRAX353 proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. 3. If need[...]

P age 55 How Do I Use It? Entering an address with a postal code The current Sensis R15 map does not support Post Codes as described in this section. All of the above address searching possibilities can be performed with entering the postal code instead of the settlement name. Find below an example with a full address: The procedure is explained st[...]

P age 56 How Do I Use It?   • T ap to open the list of results before it appears automatically . 4. Pick the street from the list. 5. Enter the house number: 1. T ap . 2. Enter the house number on the keyboard. 3. T ap tonishenteringtheaddress. 6. The map appears with the selected point in the middle. T ap (Simple mo[...]

P age 57 How Do I Use It? Selecting the destination from your Favourites Y ou can select a location that you have already saved as a Favourite to be your destination. The procedure is explained starting from the Navigation menu. 1. T ap the following buttons: (Simple mode) or , (Advanced mode). 2. T ap the Favourite that you want to set as your des[...]

P age 58 How Do I Use It? location.  • : The POI will be searched around the current GPS position.  • : The POI will be searched around the destination of the active route.  • : The POI will be searched not around a given point but by the size of the detour it means from the active route. This can be useful if you search for[...]

P age 59 How Do I Use It? 5. T ap the desired POI in the list. 6. The map appears with the selected point in the middle. T ap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. S e l e c t i n g t h e d e s t i n at i o n w i t h a s a v ed P O I search criteria POI searc[...]

P age 60 How Do I Use It? 1. T ap the following buttons: (Simple mode), or , (Advanced mode). 2. If necessary , turn the page with to see earlier destinations. 3. T ap the desired item. 4. The map appears with the selected point in the middle. T ap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, an[...]

P age 61 How Do I Use It? C r e a t i n g a m u l t i - p o i nt r o u t e ( i n s e r t in g a v i a point) Multi-point routes are created from simple routes, so a route must beactiverst.Oneofthewaysofexpandingtherouteistokeepthe destination, and to add via points (intermediate destinations). This fe[...]

P age 62 How Do I Use It? The route is optimised. The start point and the destination remain at their position, but the via points are reordered to make the shortest possible route. The selected point is removed from the route. The route remains as it was before adding the new point. Every time a new point is added, the route is recalculated automa[...]

P age 63 How Do I Use It? T ap the following buttons: , , . The list of route points appear with the start point at the top of the list and thenaldestinationatthebottom.Ifseveralviapointsexist,youmight need to turn the page. T ap one of the route points in the list. Y ou have the following options: Button A[...]

P age 64 How Do I Use It? • ViatheRouteInformationscreen:tap , , , . • ViatheRouteInformationscreenusingashortcut:tap , . W atching the simulation of the route This feature is available in Advanced mode only . The procedure is explained starting from the Map screen. 1. T ap the following button[...]

P age 65 How Do I Use It? Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road. While driving, you will not be able to set a new destination or to change settings. The only screen control that remains enabled is the gesture that puts you back on the Map screen. The procedure is explained starting from the M[...]

P age 66 How Do I Use It? , , . If via points exist in the active route, you cannot delete the route immediately on the Route Information screen. T ap repeatedly until all via points disappear and the button appears. T ap it to cancel the whole route. Using T rack Logs TRAX353 can record the track (how your GPS position changed) that you drive. Y o[...]

P age 67 How Do I Use It? recording. TRAX353 labels the T rack Log with a time stamp. (As an alternative, you can tap the button in the Quick menu to start, and later to stop the T rack Log recording.) Simulating a T rack Log on the map 1. T ap the following buttons: , , . 2. Locate the desired T rack Log, and then tap the button next to it. 3. The[...]

P age 68 How Do I Use It? • Ifyouupdatedyourmapsinceyourstsavedtheroute, TRAX353 recognises the change, and recalculates the driving instructions according to the latest available map information. • TRAX353deletesfromtheroutetheviapointsthatyoualready left behind during [...]

P age 69 How Do I Use It? Screen Button Description Map The Map screen. Find Selecting the destination (for example an address or a POI) or using the search engine of TRAX353 for any other reason (for example to look for the phone number of a POI). Route Managing the active route (obtaining information about it, changing or deleting it or parts of [...]

P age 70 How Do I Use It? screenshot), but when you tap the map, additional buttons and controls appear for a few seconds (right screenshot). Most parts of the screen behave as buttons. Symbol Name Action T urn Preview , that is, the next route event Opens the Route Information screen Second upcoming route event Opens the Itinerary T rip data Opens[...]

P age 71 How Do I Use It? Position menu (appears when navigating a route) Opens the Position menu Cursor menu (appears when there is no GPS position or the Cursor is not at the current GPS position) Opens the Cursor menu Open/Close Map control buttons T ap this button to show or hide the following map control buttons: •Zoomin/out •Rota[...]

P age 72 How Do I Use It? Enable Smart Zoom (replaces the previous button if there is no GPS position or the map has not been moved) T ap this button once to enable Smart Zoom. T ap&hold the button to set the zoom limits of Smart Zoom. Zoom preset buttons (available in Advanced mode only) T ap one of the preset buttons tosetthezooml[...]

P age 73 How Do I Use It? Map scale (2D map only) n/a Icons on the map There are several status icons on the map. Most of them also function as a button. The information they provide is as follows: • GPSpositionquality • Batterystatus • V ehicletypeusedforroutecalculation • Soundstatus(mutedor[...]

P age 74 How Do I Use It? Icon Description TRAX353 has no connection to the GPS receiver: GPS navigation is not possible. Devices with a built-in GPS receiver are permanently connected. On such devices, the icon does not appear in normal circumstances. TRAX353 is connected to the GPS receiver , but the signal is too weak and the receiver cannot det[...]

P age 75 How Do I Use It? Pedestrian Status indicator strip Thi s i s a co mpl ex ind ica tor . In one str ip it ind ica tes th e f oll owi ng sta tus information: Icon Description The sound output of TRAX353 is muted. The sound output of TRAX353 is enabled. TRAX353 records a T rack log when GPS position is available. T rack log recording is disabl[...]

P age 76 How Do I Use It? Next two route events (T urn Preview elds) The re are tw o eld sr ese rve don th eM ap scr een to di spl ay the ne xt two man oeu vre s ( rou te eve nts th at are lis ted in th e I tin era ry) . B oth th e t ype of the ev ent (t urn , r oun dab out , ex iti ng mot orw ay , et[...]

P age 77 How Do I Use It? , Board ferry . , Leave ferry . , Approaching the next via point. , Approaching the destination. In cer tai ns itu ati ons whe nr out ee ven ts are no ti mpo rta nt, th ese e lds sh ow other useful pieces of information. They are described here: page 16. Objects on the map Streets and[...]

P age 78 How Do I Use It? T errain Detail Level 3D terrain map data shows changes in terrain, elevations or depressions in the land when you view the map, and use it to plot the route map in 3D when you navigate. Landmarks Landmarks are 3D artistic or block representations of prominent or well-known objects. 3D landmarks are only available in selec[...]

P age 79 How Do I Use It? Start point Therstpointoftheroute. No r ma l ly , if GP S p o si t io n i s a v ai l ab l e, i t is th e s t ar t p o in t of th e r o ut e . I f t he r e i s no valid GPS position, TRAX353 uses th e l a st kn o wn GP S pos it i on as th e s t ar t point. When you are using a saved route, TRAX353 asks you[...]

P age 80 How Do I Use It? Active leg of the route The section of the route on which you are driving. If you have not added any via points (only a destination), the entire route is the active leg. If you have added via points, the active leg is the part of the route from your current location to the next route point (the next via point, or the desti[...]

P age 81 How Do I Use It? Cursor menu As soo n a s y ou sel ect on e p oin t in th e F ind me nu, th e m ap app ear s w ith th e Cursor menu, a menu with possible actions for the selected point. Alt ern ati vel y , whe n yo u t ap the ma p, con tro l b utt ons ap pea r . T ap aga in to place the Cursor , a radiating red dot. Now tap , a nd the Cu r[...]

P age 82 How Do I Use It? If the Cursor is at or near the destination, this button replaces the previous one, and deletes the current destination from the route. The last via point is promoted as destination, or if there are no via points, the route is deleted. The Cursor is added to the active route as an intermediate route point, a point to be re[...]

P age 83 How Do I Use It? Map locations can be marked with Pins. Unlike POIs, a Pin has no name and other details, only a colour to let you tell one from another on the map. If the Cursor is at or near a Pin, this button replaces the previous one, and deletes the Pin the Cursor is near to. The Cursor is saved as the location of a Road Safety Camera[...]

P age 84 How Do I Use It? In the to p s ect ion of th e s cre en y ou see in for mat ion ab out th e c urr ent ro ute . The e lds on th is scr een ar ec onti nuo usl yu pda ted wh ile yo uk eep th e screen open. Whe ny ou ope nt he scre en, al l eld sc ont ain in for mat ion ab ou[...]

P age 85 How Do I Use It? T ime Left Shows the time needed to reachthenaldestinationof the route based on information available for the remaining segments of the route. The calculation cannot take into accounttrafcjamsandother possible delays. T apthiseldto change the content ofalldatae[...]

P age 86 How Do I Use It? Appears only if there are no via points in the route. Deletes the active route. T rip Information screen The T rip In for mat ion sc ree n h as both ro ute an d t rav el dat a y ou mig ht nee d dur ing yo ur jou rne y . I t c an be ope ned di rec tly fr om the Ma p s cre en by tappingtheT ripDataeld( ). T[...]

P age 87 How Do I Use It? Compass Shows the current heading. T apthiseldtoshow it on the map screen in one of the T rip Data elds. Speedo- meter Shows the current speed both graphically and as a number . T apthiseldtoshow it on the map screen in one of the T rip Data elds. Distance Remaining Shows the dista[...]

P age 88 How Do I Use It? Speed Limit Shows the speed limit of the current street if the map contains it. T apthiseldtoshow it on the map screen in one of the T rip Data elds. Opens a new screen with three resettable T rip Computers. T ap this button to change the content of theRouteDataelds to show information a[...]

P age 89 How Do I Use It? from the T rip Information screen by tapping . The e lds on th is scr een ar ec onti nuo usl yu pda ted wh ile yo uk eep th e screen open. Y ou ca n s wit ch bet wee n t he tri ps, pa use th en res ume the m, or res et the ir data. Y ou have the following functions on this screen: Nam[...]

P age 90 How Do I Use It? Name Main function (single tap) Function (tap and hold) Master V olume slider Adjusts the sound volume of the device. All sounds of the application are involved. No action. If you only adjust the volume, you need to use this button to return to the Map screen. Opens the Navigation menu. Mutes all sounds of TRAX353. Opens S[...]

P age 91 How Do I Use It? Opens the Bluetooth menu screen and access to the Bluetooth feature. Same as main function. GPS data screen T ap the following buttons: , t o o pen th e G PS Data screen and to see the status of the GPS reception. Icon Colour Name Description Green TR A X3 5 3 h as a co n ne c ti o n t o t he G PS re c ei v er an d G P S p[...]

P age 92 How Do I Use It? Grey TRAX353has a connection to the GPS receiver but GPS position information is not available. Red TRAX353 has no connection to the GPS receiver . Green, blinking TRAX353 is connected to the GPS receiver . Y ellow , blinking TRAX353 has no connection to the GPS receiver but it is still trying to establish a connection. Re[...]

P age 93 How Do I Use It? n/a Status bar for the satellites Dark bars are for the yellow and lit bars are for the green satellites. The more satellites your GPS tracks (the green ones), the better is your calculated position. Find menu Select the destination of your route. T ap the following buttons: , . Button Description Reference If you know at [...]

P age 94 How Do I Use It? Button Description Reference Opens a screen with useful route data. Page 83 Y ou can browse the driving instructions that TRAX353 follows during navigation. Y ou can exclude manoeuvres or streets to adjust the route to your preferences. Page 27 Y ou can modify the route: remove route points or change their order . Page 62 [...]

P age 95 How Do I Use It? Recording, simulating, renaming or deleting track logs, assigning colour to them to be shown on the map Page 96 Renaming or deleting Favourites Page 97 Creating, updating or deleting POIs Creating, updating or deleting POI groups Modifying POI visibility settings Page 97 Creating, renaming or deleting Saved Search Criteria[...]

P age 96 How Do I Use It? Button Description Deletes the selected item in the History . Deletes the entire History . , T urns the page for additional list items. Manage T rack Logs Y ou ca n r eco rd Tr ack Lo gs, th en pla y t hem ba ck, di spla y t hem on th e m ap, and see their details. T ap the following buttons: , , . Button Description Start[...]

P age 97 How Do I Use It? T ap one of the coloured buttons to assign a colour to the T rack Log. The T rack Log will be shown on the map with this colour . The map returns with the T rack Log. The map is scaled to show the whole T rack Log. Deletes the selected T rack Log. Saves the T rack Log on the inserted memory card in GPX format. Manage Favou[...]

P age 98 How Do I Use It? Button Description Button with the name of the POI group Opens the list of the subgroups of this POI group. The new list behaves the same as this one. Button with the name and address of a POI item Opens the selected POI for editing. Only the POIs you have created appear in this list. Opens the selected POI group for editi[...]

P age 99 How Do I Use It? Button with the icon of the POI group T ap this button to select a new icon for the POI group. Deletes the edited POI group. Y ou are only allowed to remove POI groups that you have created. When a POI item is open for editing: Button Description Button with the name of the POI T ap this button to rename the POI. Button wi[...]

P age 100 How Do I Use It? Deletes the entire list. , T urns the page for additional list items. T ap to save a new search criteria. Similar to how you search for a POI, select the searchreferencerst,thenselectthePOI group or subgroup to search in. User Data Management Y ou ca n m ana ge the da ta you ha ve sav ed (Pi ns, PO[...]

P age 101 How Do I Use It? Settings menu Y ouca nc on gur et he pro gra mse tti ngs ,a nd mod ify th eb eha vio ur of TRAX353. T ap the following buttons: , . The Settings menu has two pages of submenus. T ap to ac ces s t he other options. Button Description Reference Y oucanne-tunetheappearance?[...]

P age 102 How Do I Use It? Y o u c a n c h a n g e s om e d e v i c e s e t t i n g s t o c o n t r o l the screen backlight when TRAX353 is running. Page 1 1 1 Y ou can set up an automatic T rack Log saving,andne-tuneitssettings. Page 1 12 T h i s s c r e e n ha s n o n a v i g a t i o n f e a t u r e . I t m e r e l y p r o v i d e[...]

P age 103 How Do I Use It? ColourProles TRAX353 is able to show the map and the menus in different colours during the day and during the night. Selectthecolourprolestobeusedineachmode, and select the automatic or manual switching between thedaytimeandnightcolourproles. Elevation on 2D Map 2D [...]

P age 104 How Do I Use It? Dynamic V olume When driving at high speed, the noise in the car may be too loud to clearly hear the voice guidance and other sounds. Using Dynamic V olume you can instruct TRAX353 to increase the volume when your speed exceeds a certain minimum, and reach its highest volume at the given maximum speed. Route Planning opti[...]

P age 105 How Do I Use It? • T axi • Bus • Emergencyvehicles • Bicycle • Pedestrians Road T ypes Used for Route Planning: T ype Description Motorways Y ou might need to avoid motorways when you are driving a slow car or you are towing another vehicle. Unpaved roads TRAX353 excludes unpaved roads by default: unpaved roads[...]

P age 106 How Do I Use It? Route Calculation Method types: T ype Description Fast Gives the quickest possible route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. Short Gives a route that has the smallest total distance of all possible routes between the route points. Usually practica[...]

P age 107 How Do I Use It? Units Y ou can set the distance units to be used by the program. TRAX353 may not support all the listed units in some voice guidance languages. If you select a measurement unit not supported by the chosen voice guidance language, a warning message will appear . Set Date & T ime Format Y ou can set the date and time fo[...]

P age 108 How Do I Use It? T ype Description Keep Position on Road This feature allows car drivers to always correct GPS position errors by matching the vehicle position to the road network. For pedestrian navigation, this feature is automatically disabled to let the software show your exact position. By tu r ni n g o f f t hi s f e at u re yo u a [...]

P age 109 How Do I Use It? W arning settings Y ou ca n e nab le som e h and y w arn ing s, and di sab le the tou ch scr een in a moving vehicle with Safety Mode. T ap the following buttons: , , . T ype Description W arn when speeding Maps may contain information about the speed limits of the road segments. TRAX353 is able to warn you if you exceed [...]

P age 110 How Do I Use It? Speed Camera W arning This feature allows you to receive a warning when approaching a Road Safety Camera. Y ou must ensure on your own liability that using this feature is legal in the country where you intend to use it. Y ou have the following options: • AudibleWarning:beepscanbeplayedwhileyou?[...]

P age 111 How Do I Use It? Autodetect T apthisbuttonandletTRAX353ndandconnectthe GPS receiver . Menu settings Y ou ca n m odi fy the lo ok and be hav iou r o f t he Men u sc ree ns. T ap the following buttons: , , . T ype Description Animation Y ou can activate and deactivate the Menu animations. When animation is t[...]

P age 112 How Do I Use It? T ype Description Power Management Y ou ca n s et how th e b ack lig ht wil l b eha ve whe n t he scr een ha s n ot bee n t ouc hed fo r a whi le. Y ou ha ve the following options: •Backlight AlwaysOn:Thescreeniscontinuouslylit. •S mar tP owe rsa ve: Whe nr unn ing on ba tte r[...]

P age 113 How Do I Use It? T rack Logs Max. Size Y ou can set the maximum database size for the automatically saved track logs. When the limit is reached, the oldest automatically saved track logs will be deleted. Create NMEA/ SIRF Log Independently of the normal track log, you can instruct TRAX353 to record the native GPS data received from the GP[...]

P age 114 How Do I Use It? 6: Bluetooth TRAX353 includes Bluetooth® connectivity . With its integrated microphone TRAX353 allows you to answer and make calls from the touch screen. Access to the Bluetooth feature is in the Quick menu screen (page 89). From the Map screen tap the following buttons: , The Bluetooth Phone Menu screen appears. Phone M[...]

P age 115 How Do I Use It? Paired Device (No Phone) TRA X35 3 w ill se arc h f or and li st n ear by Blu eto oth de vic es. No Pai red Dev ice s a re currently listed Make sure the Blu eto oth on yo ur phone is enabled. T ouch to begin search T ouch to search for Blu eto oth devices. T ouc h t o s ele ct the de sir ed Blu eto oth device.[...]

P age 116 How Do I Use It? Y ou sh oul d s et up you r p hon e t o a llo w c onn ect ing to you r n avi gat or aut oma tic all y i n t he fut ure . S ee y our ph one ma nua l f or mor e d eta ils . Pairingisnished. T ouch to exit the pairing procedure. T ouch to initiate con nec tio n w ith Bluetooth device. About to connect to your phone [...]

P age 117 How Do I Use It? Managing Bluetooth Devices Bluetooth Off Bluetooth On (Disconnected) Y ou may have multiple phones set up for connection with your TRAX353. Bluetooth Off (Connected) Bel ow is the ty pic al dis pla y w hen Blu eto oth on yo ur mob ile is se t t o c onn ect automatically . Bluetooth On (Connected) T ouch to turn BT on T ou[...]

P age 118 How Do I Use It? Paired Devices Screen Y ou can add and remove phones from your list and disconnect and connect to dif ferent ph one s u sin g t he Lis t S cre en. If yo u h ave ph one s a lre ady pa ire d to the T RAX 353 , b ut hav e n one of th em cur ren tly co nne cte d, the fo llo win g screen appears when you touch from the Main Me[...]

P age 119 How Do I Use It? Answering a Bluetooth Call Phone Menu (T alk) Phone Menu (T alk on Phone) Whe n a Blu eto oth ca ll is rec eiv ed the na me and num ber is displayed. T ouch to end call. T ouch to can cel incoming call. T ouch t o acc ept th e c all and begin talk. T ouch to talk on phone T ouch to talk on phone[...]

P age 120 How Do I Use It? Making a Bluetooth Call (from Dial Pad) T o make a Bluetooth call touch the following buttons from the Map screen. , , . Phone Menu (T alk) Phone Menu (T alk) 1. i) Inp ut pho ne number 2. T ouch to call 1. ii) T o uch to delete digit 3. T ouch t o end call 2. ii) T o uch to mot e c all[...]

P age 121 How Do I Use It? Making a Bluetooth Call (from PhoneBook) Add to Phonebook T ouch to open Phonebook list. If the phonebook is empty tap to dow nlo ad pho neb ook fr om pai red phone. Phonebook Empty Dial from Phonebook Phonebook Downloaded Select Name T ouch to add Phonebook from Mobile Phone T ouch , to scroll down the phonebook list.[...]

P age 122 How Do I Use It? Name w/multiple number Making Call Making a Bluetooth Call (from Call Log) Call Log T ouch to open Call Log list. If the ca ll log is em pty T RAX 353 wi ll dow nlo ad the ca ll log fr om the pa ire d phone. T ouc h n ame to sel ect . I f a nam e e ntr y has mu lti ple num ber s the n t hes e will display . T ouc h p hon [...]

P age 123 How Do I Use It? Answered Call Making Call Dialled Call Missed Call T ouch to sel ect ca ll log . The det ail s o f the se lec ted log ged ca ll will display . T ouch to cancel call. T ouch to begin call.[...]

P age 124 How Do I Use It?[...]

P age 125 How Do I Use It?[...]

P age 126 How Do I Use It? 6: Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and need at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals. If [...]

P age 127 How Do I Use It? North-up map orientation In North-up mode the map is rotated so its top always faces North. This is the orientation in 2D map view mode and in Overview mode. See also: T rack-up map orientation. Overview mode Y ou can instruct TRAX353 to automatically switch to Overview mode if the next route event is in a distance. In Ov[...]

P age 128 Notes[...]

P age 129 Notes[...]

P age 130 UNIDEN TRAX353 IN CAR NA VIGA TION Limited One Y ear Warranty Please keep your sales docket as it provides evidence of warranty . Important: Evidence of original purchase is required for warranty service. W arrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited W arranty is only valid in the original count[...]

P age 131 P ARTS COVERED: This warranty covers for one (1) year , the Product and included accessories. ST A TEMENT OF REMEDY : In the event that the Product does not conform to this warranty at any time while this warranty is in effect, the warrantor at its discretion, will repair the defect or replace the Product and return it to you without char[...]

THANK Y OU FOR B UYING A UNIDEN PR ODUCT . © 2008 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China. USZZ01214ZZ(0)[...]