Vector VEC021APC инструкция обслуживания

1 OWNER’S MANUAL & WARRANTY INFORMA TION VEC021APC THIS MANUAL CONT AINS IMPORT ANT INFORMA TION REGARDING SAFETY , OPERA TION, MAINTENANCE AND STORAGE OF THIS PRODUCT . BEFORE USING, READ AND UNDERST AND ALL CAUTIONS, W ARNINGS, INSTRUCTIONS AND PRODUCT LABELS, PLUS YOUR VEHICLE’S BA TTERY MANUF ACTURER GUIDELINES. F AILURE TO DO SO COULD [...]

2 CONTENTS 1. INTRODUCTION ....................................................................................... 5 2. USING VECTOR™ AS A JUMP-ST ART SYSTEM ......................................... 5,6 2.1 Easy , Step-by-Step Jump-starting Instructions ................................... 7,8 3. CHARGING/RECHARGING ..............................[...]

3 SAFETY INFORMA TION W ARNING: (W arning statements identify conditions or practices that may result in personal injur y or loss of life) 1) When working with lead acid batteries, always make sure immediate assistance is available in case of accident or emergency . 2) Always use protective eyewear when using this product: contact with battery acid[...]

4 CAUTION: (Caution statements advise against certain conditions and practices that may result in damage to vehicles, appliances and/or The VECTOR ® Jump-starter) IMPORT ANT : Although this unit is delivered in a partially charged state, you must fully charge it with the supplied 110/120 V olt AC charger for a full 24 hours before using it for the[...]

5 1. INTRODUCTION Congratulations on selecting the VECTOR ® JUMP-ST ARTER, AIR COMPRESSOR and 12 VOL T DC POWER SUPPL Y . This compact jump-star ter is unique in the amount of energy it can supply for its size. The internal batter y is a high density sealed, lead-acid batter y that stores and delivers energy comparable to full sized ordinar y jump[...]

6 9 10 14 15 16 FIGURE 1A (FRONT VIEW) FIGURE 1B (REAR VIEW) 1. Reverse connection indicator 2. Good connection indicator 3. 12 V olt DC Accessor y Socket with 20 amp overload protection 4. Batter y Level Push Button 5. LED Charging/Batter y Level Indicators 6. Heavy-Duty W elding Quality Jumper Cables 7. Heavy-Duty 450 Amp Copper Clamps 8. Exclusi[...]

7 2. USING THE VECTOR ® AS A JUMP-ST ART SYSTEM W ARNING: 1. Before using this system to jump-start any vehicle or boat, read and understand all instructions, safety tips, warnings, cautions and first aid information provided in this manual and on the product labeling. Additional important information may also be provided by the vehicle’ s batte[...]

8 2.1 EASY , STEP-BY -STEP JUMP-ST ARTING INSTRUCTIONS 1. T urn OFF vehicle ignition and all accessories (radio, A/C, lights, cell phone, etc.). Place vehicle in park and set the emergency brake. 2. Remove booster clamps from protective holster (Figure 2): simply squeeze the handles and pull down on the clamp. 3. Procedure for jump-starting a NEGA [...]

9 FIRST AID: • SKIN: If batter y acid comes in contact with skin, rinse immediately with water , then wash thoroughly with soap and water . If redness, pain, or irritation occurs, seek immediate medical attention • EYES: If batter y acid comes in contact with eyes, flush eyes immediately for a minimum of 15 minutes and SEEK IMMEDIA TE MEDICAL A[...]

10 3.2 12 VOL T DC CHARGING 1. Insert one end of the DC/DC charging adapter into the 12 V olt DC accessor y receptacle on the vehicle or boat. 2. Insert the plug at the other end of this charging adapter into the 12 V olt DC accessor y socket receptacle on the front panel of the unit. 3. Charge the unit until the green FULL indicator lights when Ch[...]

11 6. AIR COMPRESSOR/TIRE INFLA TOR IMPORT ANT : Read Instructions Carefully T o Avoid Possible Injur y Or Property Damage. The built-in 12 V olt DC air compressor is the ultimate compressor for all vehicles, trailer tires and recreational inflatables. Three different sized nozzles are supplied. Each nozzle will clip on the end of the standard tire[...]

12 IMPORT ANT : Always leave the thumb latch in the open position when storing unit. 6.3 INFLA TING OTHER ARTICLES (WITHOUT V AL VE STEM) Inflation of other items requires use of one of the adapters (nozzles). 1. Open the hatch and remove the nozzles noting their storage positions. 2. Insert appropriate adapter (e.g. needle) into connector (chuck) [...]

13 7.1 BULB REPLACEMENT T ools needed - small Phillips screwdriver . 1. Unscrew (counterclockwise) and remove two Phillips screws. 2. Remove the lens cover . 3. Remove the burned-out bulb. 4. Replace with a new bulb (12 V olt 0.2 amp Kr ypton bulb). 5. Snap the lens cover back into place. 6. Replace (clockwise) the screws and carefully tighten. Do [...]

14 TWO YEAR LIMITED W ARRANTY PROGRAM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of V ector Manufacturing, Ltd., regarding this product. There is no other warranty , other than those described herein. This V ector Manufacturing, Ltd. product is warranted, to the original pu[...]

15 Vec021APC manual 10/02 12/3/02, 10:57 AM 15[...]

16 © 2002 VECTOR MANUF ACTURING, Ltd. • FT . LAUDERDALE, FL 33312 MADE IN CHINA Vec021APC manual 10/02 12/3/02, 10:57 AM 16[...]