Venturer CD7106VI инструкция обслуживания

C D S y s t e m f o r i P o d M i c r o I N S T R U C T I O N M A N U A L Model: CD7106Vi R[...]

- 1 - For the Customers in Canada This apparatus complies with the Class B limits for radio noise emission set out in radio interference regulations. W ARNINGS: • T O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. • T O A V OID ELECTRICAL SHOCK, DO NO T OPEN THE CABINET . REFER SER VICING T O QU ALIFIED PERSONNEL ONL [...]

- 2 - On Use Never use the unit where it would be subject to: - Heat sources such as radiators or air ducts. - Direct sunlight. - Excessive dust. - Moisture or rain. - Mechanical vibration or shock. - Uneven surface. • Do not place any heavy objects on top of the unit. • When the unit is used with an AC power adapter, do not wrap the unit in a [...]

- 3 - SYSTEM CONNECTIONS Using the AC Adapter Using an AC adapter other than the one supplied with the unit may damage the unit. This AC adapter operates on AC 100-120V~50/60Hz. CAUTIONS: • Before use, ensure the rated voltage of the adapter matches your local voltage. • The included AC adapter is for use with this unit only. Do not use it with[...]

- 4 - REMO TE CONTR OL Using the Remote Control Correctly • P oint the remote control at the REMOTE SENSOR located on the unit. • When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation. • The recommended effective distance for remote operation is about 19 feet ([...]

- 5 - LOCA TION OF CONTROLS 7. iP od Docking 8. ST ANDBY Indicator 9. TIMER Indicator 10 . Remote Sensor 11 . - V OL + Buttons 12. / - TUNING + / Button 13 . OPEN Knob 14 . CD Door 15. Earphone Jack 1. LCD Display 2. ST ANDBY/ON Button MEM.UP/ Button 3. BAND/ STOP Button PLA Y/P A USE Button 4. FUNCTION Button 5. PROG/MEM/ Button DISPLA Y Button 6.[...]

- 6 - 1. Press and hold the PROG/MEM/ button until the hour digits blink. 2. Press the or button to adjust the desired hours then press the PROG/MEM/ button once to confirm. The minute digits will begin to blink. 3. Press the or button to adjust the desired minutes then press the PROG/MEM/ button once to start clock. Setting the clock can only be d[...]

- 7 - LISTENING T O THE RADIO Presetting Stations The unit can store a total of 20 stations in memory (10FM, 10AM). Presetting allows you to tune in to a station directly. 1. Tune in to a desired station. 2. Press the PROG/MEM/ button. The preset number will blink and the “ MEM ” indicator will be shown on the display. 3. Press the MEM.UP/ butt[...]

- 8 - Repeat Current Track • Press the MEM.UP/ button until “ ” blinks on the displa y . The current tr ack will be pla yed repeatedly . Repeat the Entire CD • Press the MEM.UP/ button until “ ” stops blinking and remains on. All tracks will be played repeatedly . Cancel Playback Mode • Press the MEM.UP/ button until repeat indicator [...]

- 9 - LISTENING T O Y OUR iP od Installing the iPod Dock Adapter 1. Choose the iPod Dock Adapter that fits your iPod (if the adapter is not included in the accessory, please use it that comes with your iPod).. 2. Insert your iPod Dock Adapter into the dock until it sits firmly in place. iPod Dock Adapter Removing the iPod Dock Adapter 1. Remove the[...]

- 10 - LISTENING T O Y OUR iP od Random Playback Random plays songs/albums from your iPod in a random order. 1. Press the RANDOM button on the remote control once and the random indicator appears on the iPod screen. All songs will be played without sequence. 2. Press the RANDOM button on the remote control twice and the random indicator appears on [...]

- 11 - TIMER SETTING T o Cancel Timer • Press and hold the TIMER button on the remote control until the TIMER indicator goes out. The timer function will turn the unit on at a preset time. T o Set Timer 1. In standby mode, press and hold the TIMER b utton on the remote control until the TIMER indicator blinks. 2. Press and hold the PROG/MEM/ butt[...]

- 12 - TR OUBLESHOO TING GUIDE Design and specifications are subject to change without notice. Cleaning the Unit Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth. Cleaning the CD If the CD skips or will not play, the disc may need to be cleaned. Before playing, wipe the disc from the center outwards with a clean[...]

- 13 - LIMITED W ARRANTY VENTURER ELECTRONICS (“VENTURER”) mak es the f ollowing limited warranty . This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product. Ninety (90) Day P ar ts & Labor W arranty VENTURER products purchased in the United States are warranted to be free from defe[...]

- 14 - Printed in China 811-710691W080 Important: Also keep your "Bill of Sale" as proof of purchase. All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any warr[...]