Vidikron Vision 110 инструкция обслуживания

1080p Digital Light Processing (DLP™) Projector Vision 110 Vision 110/CineWide™ Vision 110/CineWide™ with AutoScope™ 110 VERSION 1.1 INSTALLATION /OPERA TION MANU AL[...]

[...]

Vidikron Vision Model 110 Installation/Opera tion Manual iii PRE L IMINAR Y TWO YEAR LIMITED WARRANTY For Projectors, Video Pr ocessors and Controllers Congratulations on y our purchase of a Vidikro n video product a n d welcome to the Vidikron family! With proper installation, setu p and care, y ou should enjoy ma ny years of unparal leled video p[...]

iv Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y This warranty begins on the effective date of delivery t o the end user. Fo r your conven ience, keep the origin al bill of sale as evidence of the purchase date. Pl e a se f i l l o u t a nd m a i l y o u r wa r r a nt y r e gi s t ra t i o n c a r d . I t i s imperative tha[...]

Vidikron Vision Model 110 In stallation/Operation Manual v PRE L IMINAR Y To locate the name and address of the ne arest Vidikron Authoriz ed Service Center, or for additi onal information about this Limi ted Warranty, please call or write: VIDIKRON At tn: C ustomer Service Depar tment 2900 F aber Street Union City , CA 94587 Ph: (510) 324-5900 F a[...]

vi Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Thank you for your purchase of th is quality Vidikron video projecto r! It h as been designed to provide you with the qua lity of v ideo that is expected in a home theater. For th e best performance, please read this manual carefully as it is your guide through the menus and [...]

Vidikron Vision Model 110 In stallation/Operation Manual vii PRE L IMINAR Y Manufacturer’s Name: Vidikron, a su bsidiary of Planar Systems, Inc. Manufacturer’s Addre ss: 2900 Faber Street, Union City, CA 945 8 7 hereby declares that th e products Model Numbers: Vision 110, Vision 110/Cin eWide and Vision 11 0/CineWide with AutoSco pe conform wi[...]

viii Vidikron Vision Model 1 10 Installation/Operation Manual PRE L IMINAR Y NOTE: This equipment has been tested and fo und to comply with the limits for a Class B digital device, pursuant to Part 15 of t he FCC Rules. These li mits are designed to provide reason able prot ec tion against harmful inte rference in a residential instal latio n. This[...]

Vidikron Vision Model 110 In stallation/Operation Manual ix 1 Table of Contents PRE L IMINAR Y TWO YEAR LIMIT ED WARRANTY ................ ............. ................ ............. ................ ............. ...... iii Important Safety Instr uctions ....... ................ ............. ................ ............. ................ ......[...]

Table of Contents x Vidikro n Vision Model 110 Installati on/Operation Manual PRE L IMINAR Y Installing the O ptional C ineWide L ens Mount .. .......... .......... ........... ........ .......... ........... ........ .......... ... ... 22 Installing the Auto Scope Lens M otor (Vision 110 /CineWide w ith AutoScope) ............... . 23 Installing t[...]

Table of Contents Vidikron Vision Model 110 In stallation/Operation Manual xi PRE L IMINAR Y 5. Maintenance and Troublesh ooting .......... ............. ................ ................ ............. ............ 59 Lamp Re placemen t ....... ........ ........... ........ ........ ........... ........ .......... ......... ........ .......... ....[...]

Table of Contents xii Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Notes:[...]

Vidikron Vision Model 110 Insta llation/Operation Manual xiii PRE L IMINAR Y 1 List of Figures 2-1. Vision 110 Front/Botto m/Side View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2-2. Vision 11 0 Rear Pa nel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

List of Figures xiv Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y Notes:[...]

Vidikron Vision Model 110 In stallation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manual descr ibes ho w to install, set up and oper ate th e Vidikron Vision Model 110 DLP Projector. Throughout this man ual, th e Vidikron Vision Model 110 DLP Pr ojector is referred to simply as the “Vision 110.” Target Audience Vidi[...]

Introduction 2 Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y Graphic Conv entions: These symbols appear in numerous places thr oughout the manual , to emphasize points tha t you must keep in mi nd to avoid problems with your equipment or injury: 1.2 Using This Manual Use the following table to locate the spe cif ic informa[...]

Introduction Vidikron Vision Model 110 In stallation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Vidikron further solidifies its leadership role with the introduction of the Vision 110 Digital Light Processing (DLP™) Pro jector. This overachiever combines sta te-of-the-art, 10 8 0p DLP™ resolution with advanced 3-ch[...]

Introduction 4 Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y Parts List Your Vision 110 is shipped with the follo wing items. If any items are missing or damaged, please contact your Vidikron deal er or Vidikron Custom er Service at ( 888 ) 4VIDIKRON. • Vision Model 110 DLP Projector •R e m o t e C o n t r o l U n i t [...]

Vidikron Vision Model 110 In stallation/Operation Manual 5 PRE L IMINAR Y 2.1 Vision 110 at a Glance Figure 2-1 shows th e key Vision 110 components. Figure 2-1. Vision 110 Front/Bottom/Sid e View 1. PRIMARY PR OJECTION LENS 2. VIDIKRON L OGO The logo can be rotated to ma tch the projector orient ation: inverted (ceiling-mo unted) or upright. To ro[...]

Controls and Functions 6 Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y 2.2 Vision 110 Rear Panel Figure 2-2 show s the Vision 110 r ear panel. Figure 2-2. Vision 110 Rear Panel 1. LAMP C OVER Remove this cover to ac cess the lamp compartment. 2. V ACUUM FL UORESCENT DISPLA Y ( VFD) Can be used in stead of the OSD. Displays[...]

Controls and Functions Vidikron Vision Model 110 In stallation/Operation Manual 7 PRE L IMINAR Y 5. LEFT BUTTON Used to direct-select inputs or move the me nu cursor left in the OSD. When no menu is present on-sc reen, the LEFT button toggles through the differe nt sources, in this order: HDMI 2 - HDMI 1 - HD3 (VGA/Y-Pb-Pr) - HD 2 (BNC) - HD 1 (RCA[...]

Controls and Functions 8 Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y 2.3 Vision 110 Rear Connector Panel Figure 2-3 shows the rear connector panel on the Vision 110 , and the paragraphs that fol low describe them. Figure 2-3. Rear Connector Panel 1. HD2 INPUT Five BNCs for connecting eith er RGB or component high-definit[...]

Controls and Functions Vidikron Vision Model 110 In stallation/Operation Manual 9 PRE L IMINAR Y 7. HDMI I (1) / HDMI II (2) (Digital) Two, HDCP-compliant digital video inputs for connecting a DVD player, HD tuner or other digital video source (up to 10 8 0p) with a DVI or HDMI output. 8 . HD3 INPUT Provides a standard, 15-pin VGA-styl e connection[...]

Controls and Functions 10 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 2.4 Vision 110 Remote Control Figure 2-4 show s the Vision 110 r emote control , and the paragraph s that follow descri be its functionality. Figure 2-4. Vision 110 Remote Control FOCUS LENS ZOOM LIGHT OFF ON VID S-VID HDMI1 HD2 SOURCE PICTURE MEMORY AS[...]

Controls and Functions Vidikron Vision Model 110 In stallation/Operation Manual 11 PRE L IMINAR Y 1. LIGHT Press to illuminate the buttons. 2. ON / OFF Use these buttons to turn the projector on or off. 3. Source Selection Buttons: VID Press to select Composite video input as the source. S- VID (S- V i deo ) Press to select the S-Vi deo input as th[...]

Controls and Functions 12 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 6. Memory Preset Buttons: CUST1 Press to recall settings for the current input from the “Custom 1” memory preset. ISF NIGHT Press to recall settings for the current in put from the “ISF Nig ht” memory preset. ISF DA Y Press to recall settings fo[...]

Vidikron Vision Model 110 In stallation/Operation Manual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote control, press up on the batter y cover retainer clip and lift off the cover. Install the two AAA batteries with the correct polarity a nd then replace t he cover. Notes on Batteries • Make sure that the battery pola ri[...]

Installation 14 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick overview of the Vision 110 installation process. The sections following this one provide deta iled instructions. Installation should be performed by a qualified custom video installation specialist. Table 3-1. Installation [...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 15 PRE L IMINAR Y 3.3 Installation Considerations Proper installation of your projector will ensure the quality of y our display. Whether yo u are installing a projector tempor arily or permanentl y, you should t ake the following into account to ensure your projector performs op[...]

Installation 16 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Throw Distance Throw distance is the distance measured from th e front of the projector to the screen. This is an important calculation in any projector instal lation as it determines whether or not you have enough room to instal l your projector with a des ired [...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 17 PRE L IMINAR Y Vertical and Horizontal Position Proper placeme nt of the projector relative to the screen will yield a rectangul ar, perfectly-centered image that completel y fills the screen. Ideally, the projector sh ould be positioned pe r pendicular to the screen an d in s[...]

Installation 18 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Figure 3-4. Horizontal Lens Shift (EXAMPLE ONLY) 0% Screen Center 100% Width Lens Shift (1.0 x W) 50% Width Lens Shift (0.5 x W) Screen Width (W) Note: This is a general example of l ens shift. Lenses vary in their shift capabilities. No particular lens or projec[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 19 PRE L IMINAR Y Table 3-4 lists the lens shift limits for each available Vision 110 lens, as percentages and absolute mea surements wi th a 100 x 56 inch (1 .7 8 :1) screen. Folded Optics In rear screen applications where space be hind the projector is limited, a mirror may be [...]

Installation 20 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Other Considerations Othe r considerations and tips that can help impro ve your installation : • Keep the ambient tem perature con stant and below 35 °C (95°F). Keep the projector away from heating and/or air conditioning v ents. Changes in temperature may ca[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 21 PRE L IMINAR Y 3. Remove the Le ns Cavity Front Cover. 4. Remove the Rear Lens Cap. 5. Hold the lens a ssembly with the motor facing the right side of th e Lens Cavity. Carefully insert the back of the lens assembly into the hole in the lens flange. Gently push the len s assem[...]

Installation 22 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 6. Lock the lens in plac e by turning the Lens Locking Nut (to the left of the lens) 1 8 0 degrees counter-clockwise. (Use a 6.0mm hex wrench.) 7. Remove the Front Lens Cap. 8 .R e p l a c e t h e L e n s Cavity Front Cover. 9. Re-install the P rojector Fro nt Je[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 23 PRE L IMINAR Y Installing the AutoScope Lens Motor (Vision 110/CineWide with AutoScope) Figure 3-6 shows th e Vision 110/Cine Wide with AutoScope moto r assembly. Figure 3-6. Vision 110/CineWid e with AutoScope Motor Assembly - Exploded View 1. Do not install the CineWide lens[...]

Installation 24 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Remove Projector Front Feet: Place the projector upside do wn on a blanket or other soft surfac e. Loosen and remove the two front feet on the projector. Install Ceiling Mount Adapters/Projector Stands: For ceiling installati ons, the adapters bring the attachmen[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 25 PRE L IMINAR Y Figure 3-7. Vision 110 with Ceiling Mount Adapter s/Projector Stands DO NOT OVER-TIGHTEN THE SCREWS. Caution[...]

Installation 26 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Install Lens Motor: Position the Auto Scope Lens Motor (item #1) as shown in Figure 3- 8 . Line up the mounting holes on the lens motor housing with those on the underside of the projector. Secure th e motor t o the projec tor with the eight ( 8 ) remaining M6 x [...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 27 PRE L IMINAR Y Installing the Fixed CineWide Base Plate (Vision 110/CineWide) To install the fixed CineWide base plate on a Vision 110/Cine Wide: 1. Place the projector upside down on a blanket or other soft surface. 2. Line up the mo unting holes on the lens mo unt base plate[...]

Installation 28 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 3.6 Mounting the Vision 110 There are several methods fo r mounting the projecto r. Depending on yo ur chosen installation, one method may be more suitable than ano ther. Floor Mounting (Upright) In typical front and re ar screen installations, the projector can [...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 29 PRE L IMINAR Y 3.7 Connections to the Vision 110 Proceed as follows to conn ect the Vision 110 to your video sources, exte rnal controller(s) – if present – and AC power. When connectin g your equipment: • Turn off a ll equipment before making a ny connecti ons. • Use [...]

Installation 30 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Digital (DTV) RGB or Component Video Connections: See Figure 3- 11 and Figure 3-12 . Figure 3-11. Digital (DT V) RGB or Co mponent Video Connections (HD1, HD2) WIRED REM O R ED REMOTE HD2 (BNC) HD1 (RCA) HD1 (RCA) HD2 (BNC) HD3 (VGA / Y -Pb-Pr) HD3 (VGA / Y -Pb-P[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 31 PRE L IMINAR Y Figure 3-12. Digital (DTV) RGB or Component Video Connections (HD3) HD3 (VGA / Y -Pb-Pr) HD3 (VGA / Y -Pb-Pr) Green/Y Blue/Pb Red/Pr Horiz V ert DTV or Progressive Component (YPbPr) Source[...]

Installation 32 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Analog (Computer) RGB Connections: See Figure 3-13. Figure 3-13. Analog RG B Connections HD2 (BNC) HD2 (BNC) HD3 (VGA / Y -Pb-Pr) HD3 (VGA / Y -Pb-Pr) V ert Horiz Red/Pr Blue/Pb Green/Y Personal Computer[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 33 PRE L IMINAR Y S-Video/Composite Video Connections: See Figure 3-14. Figure 3-14. S-Video and Co mposite Video Connections HD3 (VGA / Y -Pb-Pr) HD3 (VGA / Y -Pb-Pr) DVD Player, VCR, Satellite Receiver, Laser Disc etc.[...]

Installation 34 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y RS-232 Controller Connection Use a “null-modem” 9-pin RS-232 cable to connect a PC or home theater con trol/automation system (if present) to the RS-232/4 8 5 port on t he Vision 110; see Figure 3-15 . For more information about usin g this connecti on, re fe[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 35 PRE L IMINAR Y Connecting 12-volt Trigger Outputs to External Equipment If your Vision 110 is equipped with a Ci neWide with AutoScope system, connect the AutoScope lens motor to a 12-volt trigger o utput on the Vision 110; see Figure 3-16 . Similarly connect other 12-volt tri[...]

Installation 36 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Connecting an External IR Receiver to the Vision 110 If infrared signals from the remote control cannot rea ch the projector due to excessive distance or obstructions such as wa lls or cabinet doors, you can connect an external IR receiver to the WIRED REMOTE in [...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 37 PRE L IMINAR Y 3.8 Turning on the Power 1. Turn on your source compo nents. 2. If this is an AutoScope-e quipped projector , turn on the main powe r switch at the rear of the AutoScope le ns motor. The lens moto r powe r switch is located next to the AC input (see Figure 3-16 [...]

Installation 38 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 3.10 Primary Lens Adjustments To access the motorized lens co ntrols, use the FOCUS, ZOOM an d LENS buttons on the Vision 110 remote control unit (described on page 12 ). Alternatively, select Displa y Device from the Ser vice Menu. Select Configure, th en Lens f[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 39 PRE L IMINAR Y 3.11 Installing and Adjusting the CineWide Anamorphic Lens If you are inst alling a CineWide -equipped projector, proceed as follo ws to install and adjust the anamorphic lens. Attach Lens Mounting Assembly to Lens Motor Carriage Plate (CineWide with AutoScope) [...]

Installation 40 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 3. Secure the Anamorph ic Lens Holder to the plate using the He x Bolts/Washers (item #6) and Yaw/X Adjustment Levers that you removed in Step 1. 4. Use the Lens Mounting Screws to attach th e Lens Adapter Ring (item #1) to the Pitch Adjustment Yoke (item #2); se[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 41 PRE L IMINAR Y Configure Lens Motor Trigger CineWide with AutoScope maintains consta nt image height independent of the aspect ratio, while using the full displa y resolution of the projector. It accomplishes this by moving the anamorphic lens in fro nt of the primary le ns wh[...]

Installation 42 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Adjusting the Height (Y): With the white field still on-screen , loosen the Height/Y Adjustment T-Screws on either side of the le ns. Then, slowly move the anamorphic lens into place so that there are no shad ows on the to p or bottom of the screen: When the heig[...]

Installation Vidikron Vision Model 110 In stallation/Operation Manual 43 PRE L IMINAR Y Adjusting the Yaw: Loosen the Yaw/X-Adjustment Lever s to allow the lens to pivot freely from side to side. Then, angle the lens to even out any left-right pincushion disto rtion: Once the proper lens angle has been set, f i rmly tighten the Yaw/X-Adjustment Lev[...]

Installation 44 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Adjusting the Geometry: 1. Input an anamorphic cross-hatc h test pattern to the pr ojector. 2. Unscrew the Anamorph ic Lens just en o ugh to allow it to rotate freely. 3. Grasp the lens by the center ring and r o tate the lens until the image is properly anamorph[...]

Vidikron Vision Model 110 In stallation/Operation Manual 45 PRE L IMINAR Y 4.1 Using the On-Screen Menus To display the Main Menu, press the MENU button on the remote co n trol (Figure 2- 4) or projector rear panel ( Figure 2-2 ). To select a me nu item, use the and buttons on the remote co nt rol or projector rear panel to highlight it. Then, to c[...]

Operation 46 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Figure 4-1. Vision 110 OSD Menu Structur e Service Test Video Horizo ntal Ram p Vertical Ramp Color Bars 1 Color Bars 2 Display Device - Configure Installation Picture Orientation: Floor Front Ceiling Front Floor Rear Ceiling Rear Lens Focus Zoom Shift Lamp Info (re[...]

Operation Vidikron Vision Model 110 In stallation/Operation Manual 47 PRE L IMINAR Y Main Menu The Main Menu is the starting point for accessing all projector functions. (The Calibration and Service men us are hidden an d not accessible until you en ter a passcode.) Input Source From the Main Menu, select Input Sour ce to choose a vid eo signal sou[...]

Operation 48 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Table 4-1. Aspect Ratio Settings Aspect Ratio Remote Control Key Description 16:9 16:9 Select 16:9 to view 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 screen. 4:3 4:3 Standard 4:3 scales the input sig[...]

Operation Vidikron Vision Model 110 In stallation/Operation Manual 49 PRE L IMINAR Y Picture Use the controls in the Picture Men u to calibr ate your Vision 110 for optimum pic ture quality. The Vision 110 has been designed to incorpor ate setup and calibratio n standards established by the Imaging Science Founda tion (ISF). Th e ISF has de v elope[...]

Operation 50 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Although it may be possible to obtain satisfactory picture quality using the naked eye and regular program mate rial, Vidikron r ecommends using the fol lowing calibration tools for best results: • External test pattern source – Ovation Multimedia, Digital Video[...]

Operation Vidikron Vision Model 110 In stallation/Operation Manual 51 PRE L IMINAR Y Contrast: On your external test pattern source, sele ct a stepped, gray-b ar pattern like the one shown in Figure 4-3 . Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast Select Contrast and press ENTER or SELEC T . Adjust the contrast to a point just belo[...]

Operation 52 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Select Color and press ENTER or SELECT . While loo king at the colo r bar pattern thro ugh a blue filter, ad just the color sa turation level until the outermost (gray and blue) color bars appear to be a single shade of blue: Tint: Tint or “h ue” is essentially [...]

Operation Vidikron Vision Model 110 In stallation/Operation Manual 53 PRE L IMINAR Y Sharpness: “Sharpness” is the amoun t of high-frequ ency detail in the image. To adjust sharpness, select Sharpness fr om the Picture menu and press ENTER or SELECT . O n your external test pattern so urce, sele ct a pattern l ike the one show n in Figure 4-5 .[...]

Operation 54 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Overscan: Image Overscan pushes th e outside edge of th e active picture area of th e video signal out beyond the edge of the display area. Some television programs are produced based on the a ssumption that older television sets may not display the outer edges of t[...]

Operation Vidikron Vision Model 110 In stallation/Operation Manual 55 PRE L IMINAR Y Calibration Use the Calibration menu to perform ad vanced picture qual ity adjustments. This m e nu should be used by ISF-certified technicians only . To recall the ISF Night or ISF Day settings, select “ISF Night” or “ISF Day” from the ISF Presets menu (se[...]

Operation 56 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y ISF Night - Input Color: The In put Color contr ols are similar t o those in the Displa y Color menu (see above), but adjust the color balance o f the incoming signal. These settings are also saved independen tly for each input. • Gain/Offset: Refer to ISF Night -[...]

Operation Vidikron Vision Model 110 In stallation/Operation Manual 57 PRE L IMINAR Y Service Use the Service menu to access advanc ed projector config uration settings. This m en u should be used by ISF-certified technicians only . Test Video: Select Test Video from the Service Menu to access the internal test patterns on the Vision 110. Four patte[...]

Operation 58 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Triggers: Select Triggers from the Service menu to configure the 12-vol t trigger outputs. You can assign one or more trigger outpu ts to each aspect ratio. Those triggers are then activated by selecting that aspect ratio . If your projector is equipped with the Vid[...]

Vidikron Vision Model 110 In stallation/Operation Manual 59 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be r eplaced when it re aches the end o f its life (typically 20 00 hours), or sooner if a noticeable degr adation in brightness occurs. When you replace a lamp, you should replace the fil ters as well. F or lamp or filter replac ement, p[...]

Maintenance and Troubleshooting 60 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 6. Install the new lamp mo dule. 7. Replace the lamp cover and re-tighten al l screws. 5.2 Filter Replacement Whenever you repla ce the lamp – or more often if the proj ector is installed in an e xtremely dusty environmen t – you shoul d al[...]

Maintenance and Troubleshooting Vidikron Vision Model 110 In stallation/Operation Manual 61 PRE L IMINAR Y 5.3 Troubleshooting Tips Table 5-1 provides some general guidelin es for tr oubleshooting problems y ou may encounter with th e Vision 110. If the suggested so lutions fail to resolve the problem or if you encounter an issue not desc ribed her[...]

Maintenance and Troubleshooting 62 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Notes:[...]

Vidikron Vision Model 110 In stallation/Operation Manual 63 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the Vision 110 with a home theate r automa tion/control sy stem or a PC running terminal emulatio n software, connect it to your contro l system or PC as sh own in Figure 3-15 . Use a null-modem cabl e. If you are usi[...]

Serial Communications 64 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Table 6-1 lists th e serial comma nds supported by the Vision 11 0 and the responses it sends back to the control system or PC. Table 6-1. Seri al Commands and Respons es Command Description Response off Turns projector off Powering Down on Turns project[...]

Serial Communications Vidikron Vision Model 110 In stallation/Operation Manual 65 PRE L IMINAR Y Image Preset Commands SISF 0 Loads “ISF Night” image preset ISF Night SISF 1 Loads “ISF Day” image preset ISF Day SISF 2 Loads “Custom 1” image preset Custom 1 SISF 3 Loads “THX” image preset THX Menu Navigation Commands The following se[...]

Serial Communications 66 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Notes:[...]

Vidikron Vision Model 110 In stallation/Operation Manual 67 PRE L IMINAR Y 7.1 Vision 110 Specifications Table 7-1 lists the Vision 110 specifications. 7 Specifications Table 7-1. Vision 110 Specifications Projector Type: Dig ital Light Processing (DLP), 3-chip, 16:9 DMD Native Resolution: 1920 x 10 8 0 (16: 9) Aspect Ratios: 4:3, Letterbox, 16:9, [...]

Specifications 68 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Brightness and Contrast: Cinema Stan dards Measurement System (CSMS) Specifications - Brightness: 5 8 .3 foot-Lamberts (fL) - Contrast Ratio: 320:1 These measurements are take n from the projector in a control led, home theater environment. All measur ements ar[...]

Specifications Vidikron Vision Model 110 In stallation/Operation Manual 69 PRE L IMINAR Y 7.2 Vision 110 Dimensions Figure 7-1 shows th e Vision 110 dimension s (all dimensions are in inches). Figure 7-1. Vision 110/CineWid e with AutoScope Dimension s 0 2.47 6.44 17.69 18.65 23.60 12.18 7.60 16.76 4.89 0 1.65 8.43 8.96 0 5.36 6.01 1.21 9.09 7.39 1[...]

Specifications 70 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 7.3 Supported Timings Table 7-2 lists th e signal types supported by each input on the Vision 110. Table 7-2. Supported Signal Timings by Input Format Resolution Refresh Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) Supported? ( √ = Yes, – = No[...]

Specifications Vidikron Vision Model 110 In stallation/Operation Manual 71 PRE L IMINAR Y 4 8 0/60i 720x4 8 7 59.94 15.734 13.500 √ √ √ √ 4 8 0/60p 720x4 8 3 59.94 31.469 27.000 √√√ – 576/50i 720x576 50.00 15.625 14.750 √ √ √ √ 576/50p 720x576 50.00 31.250 29.000 √√√ – 720/50p 12 8 0x720 50.00 37.500 75.250 √√√[...]

Specifications 72 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Notes:[...]

[...]

Vidikron 2900 F aber Street Union City , CA 94587 510-324-5900 F ax 510-324-5905 1-888-4-VIDIKRON www.vidikron.com SERIAL NUMBER 020-0 8 34-00 rev. B December 2007[...]