Volvo S40 (2005) инструкция обслуживания

S4 0 VO L VO 2004 TP 7012 (Frenc h). A T 0347. Printed in Sweden, Elanders Graphic Systems AB, Gšte borg 2003 200 4 CO N DU ITE ET E NTR ETI E N S40 TP 7012 WEB EDITION[...]

1 Introduction Dear V olvo owner We hope you will enjoy many years of driving pleasure in your Volvo. The car has been designed for the safety and comfort of yo u and your passengers. Volvo is one of the safest cars in the wor ld. Your Volvo has also been designed to satisfy all current safety and e nviro nmental requirements. In order to increase [...]

2 Introduction Owner's manual A good way of getting to know your new car is to read the owner's manual, ideally before your first journey. This will give you the opportunity to familiarise yourself with new functions, to see how best to handle the car in different situations, and to make the best use of all the car's features. Please[...]

3 Introduction V olvo Cars’ Environmental philosophy Environmental care, safety and quality are the three core values which influence all operations of the Volvo Car Corporation. Volvo cars comply with strict international environmental standards and are manufactured in plants, which are among the cleanest and most resource-efficient i n the worl[...]

4 Introduction Save the environment We believe that our customers share our concerns about the environment. You can help save the environment by purchasing environmentally optimised car care products and by servicing and maintaining the car according to the instructions in the owner’s manual. Below are a few tips on how to save the environment: ?[...]

5 Table of Contents Instrument overview 7 Safety 13 Instruments and controls 33 Climate control 59 Interior 71 Locks and alarm 83 Starting and driving 93 Wheels and tyres 119 Car care 133 Maintenance and service 139 Infotainment 163 Specifications 191[...]

6 Table of Contents[...]

7 Instrument overview Instrument overview Overview left-hand drive cars 8 Overview right-hand drive cars 10 Driver’s door control panel 12[...]

8 Instrument overview Left-hand drive Overview , left-hand drive cars[...]

9 Instrument overview 1. Steering wheel adjustment 2. Bonnet release 3. Control panel 4. Direction indicators, main beam, trip computer 5. Lighting, fuel filler flap opener 6. Door handle, central locking 7. Air vents in the dashboard 8. Air vent side window 9. Cruise control 10. Horn, airbag 11. Combined instrument panel 12. Keypad Infotainment 13[...]

10 Instrument overview Right-hand drive Overview right-hand drive car[...]

11 Instrument overview 1. Switch, post installed accessory 2. Stabili ty system ST C or D ST C 3. Electric socket 4. Parking brake 5. Control panel 6. Glovebox 7. Central locking 8. Air vent, side window 9. Air vents in the dashboard 10. Gear lever 11. Climate control 12. Settings, climate control and infotainment 13. Infot ainment 14. Display , cl[...]

12 Instrument overview Electric child loc k (option). Power windows Door mirror , left-hand side Door mirrors, setting Door mirror , right-hand side Driver’s door control panel[...]

13 Safety Safety Seat belts 14 Airbags 17 Side airbags 20 Inflatable curtain 22 WHIPS 23 When are the safety systems activated? 25 Crash mode 26 Inspecting air bags and inflatable curtains 27 Child safety 28[...]

14 Safety Extending the lap belt. The belt must be positioned low down. Always use a seat belt Braking could have serious consequences if the seat belt is not used. Ensure that all passengers are wearing their seatbelts. Otherwise, rear seat passengers may be thrown against the front seat backrests in a collision. Putting on the seat belt: • Pull[...]

15 Safety Seat belt reminder 1 A symbol lights up in the roof console (above the rearview mirror) as a reminder that the seat belt is not being worn. A symbol also lights up on the dashboard. If the car is stationary, the reminder disappears after approximately 6 seconds. Front seat The symbols remain lit if the driver or front passenger is not wea[...]

16 Safety Seat belt tensioner All the seat belts (with the exception of the rear centre position) have seat belt tensioners. This is a mechanism which, at the moment of impact, tensions the seatbelt around the body. The belt therefore restrains the passenger more quickly. Marking on seat belts with seat belt tensioners[...]

17 Safety Driver’s airbag In addition to the seat belts, the car has an airbag (SRS - Supplemental Restraint System) in the steering wheel. The airbag is folded into the centre of the steering wheel. The wheel is marked SRS AIRBAG. WARNING! The seat belt and airbag operate together. If the seatbelt is not used or is incorrectly used airbag operat[...]

18 Safety Location of the airb ag on the passenger side, left-hand drive/right-hand drive cars Warning symbol in the centre of the dashboard The SRS system is continuously monitored by the car's electronic system. The warning symbol in the combined instrument panel lights when the igniti on key is turned to positions I , II or III . The symbol[...]

19 Safety SR S system, left-hand drive S R S System The system consists of a gas generator (1) surrounded by the inflatable airbag (2). Upon a sufficiently violent collision, sensors (3) react, activating the gas generator igniters and the airbag inflates as it heats up. To cushion the impact, the airbag deflates when compressed. When this occurs, [...]

20 Safety Side airbags - S I PS bag A large proportion of the collision force is distributed by SIPS to the members, posts, floor, roof and other parts of the car body. The side airbags protect the chest and are an important part of SIPS. The SIPS ai rbag system consists of two main components: Side airbags and sensors. The side airbags are install[...]

21 Safety Left-hand drive Side impact protection system (S I PS) The SIPS airbag consists of a ga s generator (1), side airbag(2) and sensors (3). When a sufficiently violent collision occurs, the sensors react and activate the gas generator which inflates the side airbag. The airbag inflates between the occupant and the door panel, cushioning the [...]

22 Safety Propert ies The inflatable curtain supplements the existing SIPS system. The inflatable curtain is concealed in the headlining along both sides of the car. It protects both the front and rear seat. If the car is hit from the side, the inflatable curtain deploys within a few thousandths of a second. It is then inflated for approximately th[...]

23 Safety Protection against whiplash injuries - WH I PS The WHIPS system ( Whiplash Protection System) consists of energy absorbing backrests and specially developed head restraints in both front seats. The system is activated upon a collision from behi nd, based on the collision angle, speed and nature of the colliding vehicle. WARNING! The WHIPS[...]

24 Safety The following can be used: • a child seat in the fr ont passenger seat, provided that the airbag on the passenger side has been deactivated. • a rear facing child seat in the rear seat supported against the backrest of the front seat. Do not hinder the function of the WH I PS system WARNING! If a rear backrest is folded down, the corr[...]

25 Safety If the airbags have been deployed, we recommend the following: • T ow the car to a V olvo workshop. Ne ver drive with deployed airbags. • Let a V olvo workshop replace components in the car's safety system. • The airbags do not alw ays deploy in the event of a front al collision. This means that the function was not needed at t[...]

26 Safety Driving after a collision If the car has been involved in a collision, the text CRASH MODE - SEE MANUAL may appear in the i nformation display. This means the functionality of the car has been reduced. CRASH MODE is a safety feature that comes into effect when the collision could have damaged an important function in the car, for example [...]

27 Safety Inspection intervals The year and month specified on the decal on the door pillar(s) is the date you should contact your Volvo Workshop to inspect, and if necessary, replace the airbags, seat belt tensioners and inflatable curtains. If you have any questions about the systems, please contact a Volvo workshop. Inspecting air bags and infla[...]

28 Safety Children should sit comfortably and safely The position of the child in the car and the equipment required is dictated by the weight and height of the child. The table “Position of children” page 30 in the car g ives the necessary information. • Children of all ages and sizes must always be secured in the car . Never allow a child t[...]

29 Safety Decals on the side of the dashboard WARNING! Never place a child seat/booster cushion on the front seat if the car has an airbag on the passenger side.[...]

30 Safety Position of c hildren in the car L: Suitable for certain child seats as listed in the specified type approval. Child seats may be vehicle-specific, limited, semi-universal or universal. W e ight/age Front seat Outer rear seats Centre rear seat <10 kg (22 lbs) (0–9 months) Rear-facing child seat, secured with seat belt and mounting st[...]

31 Safety I S OFI X mounting system for child seats (option) The outer rear seats are fitted with ISOFIX mountings. Contact a Volvo dealer for further information on child safety equipment. Integrated booster cushions (option) Volvo’s integrated booster cushion for the rear outer seats is specially designed to provide optimum safety for children.[...]

32 Safety • the lap belt is low over the pelvis for optimum protection • the seat belt does not touch the c hi ld’s throat or lie below the shoulders. Carefully adjust the positio n of the head restraint to suit the child. See also page 158. Lowering 1. Pull the handle 2. Move the seat down and press until it loc ks NOTE! Remember to first st[...]

33 Instruments and controls Instruments and controls Combined instrument panel 34 Check and warning symbols 35 Information display 39 Electrical socket and switch for the centre console 40 Lighting panel 41 Left-hand steering wheel stalk 43 Cruise control (option) 45 Right-hand steering wheel stalk 46 Steering wheel adjustment, hazard warning flash[...]

34 Instruments and controls 1. Speedometer 2. Direction indicators, left 3. Warning symbol 4. Information display The display presents information and warning messages, outside temperature and clock. When the temperature is between +2 °C and –5 °C, a snowflake symbol is shown in the display. This symbol serves as a warning for slippery road sur[...]

35 Instruments and controls Function test, symbols All the check and warning symbols light when the ignition key is turned to position II before starting. The operation of the symbols is then verified. All the symb ols should go out when the engine is started, apart from the handbrake symbol which only goe s out when the handbrake is disengaged. If[...]

36 Instruments and controls Indicator symbols - left-hand side 1. Fault in the emissions sy stem Drive to a Volvo workshop to have the system checked. 2. Fault in the ABS system The system is not working if the symbol lights. The car’s normal braking system continues to work, but without the ABS function. 1. Stop the car in a safe place and switc[...]

37 Instruments and controls 3. Airbags - SR S If the symbol remains lit or lights while driving, a fault has been detected in the SRS, SIPS or IC system. Drive to an authorised Volvo workshop as soon as possible to have the system checked. 4. Low oil pressure If the symbol lights while dr iving, the engine oil pressure is too low. Stop the engine i[...]

38 Instruments and controls Bon ne t 1 and boot lid Irrespective of speed, the symbol lights and the display shows BONNET OPEN or BOOT LI D OPEN. 1 Only cars with an alarm.[...]

39 Instruments and controls Message Specification ST O P SAFE L Y Stop the car and switc h off the engine. Serious r isk of damage. ST O P E N G I N E Stop the car and switc h off the engine. Serious r isk of damage. SE RVIC E U RG E NT T ake your car in for service immediately. SE E MAN UAL Read the owner's manual. SE RVIC E R EQ U I R E D T [...]

40 Instruments and controls Electric socket, DST C system, extr a equipment 12V electric sock et The electric socket can be used for different 12 V accessories, such as mobile phones and coolers. The maximum current is 10A. In order for the so cket to supply current, the ignition key must be in p osition I . WARNING! Always leave the plug in the so[...]

41 Instruments and controls 1. Headlamp levelling The headlamp height is adjusted using this control. This is used when the car is so heavily laden that it affects the height of the beams. • Normal beam height - move the control upwards (0). • Lowered beam height - move the control downwards. Cars with Bi-Xenon lighting (option) have automatic [...]

42 Instruments and controls 6. Rear fog lamp Ignition key in position I I: • Press the button to switch the fog tail lamp on. The rear fog lamp lights in combination with the main/dipped beam. The LE D in the button and the symbol in the combined instrument panel light. If the front fog lamps and the main or dipped beam are switched off and on ag[...]

43 Instruments and controls Direction indicators, light switc h and main beam flash Resistance point position (1) When changing lanes or overtaking, move the lever until you feel a distinct resistance. The lever returns when released. This action results in three flashes. Normal turns (2) The direction indicators light when you move the lever in th[...]

44 Instruments and controls Fun ct i on s The trip computer receives a great deal of data that is continuously evaluated by a microprocessor. The system has four functions which are shown in the display: • Average speed • Current fuel consumption • Average fuel consumption • Range to empty fuel t ank A verage speed When the ignition is swit[...]

45 Instruments and controls Operation Activating The controls for cruise control are to the left of the steering wheel. Setting the desired speed: • Press the CR U I SE button. C R U IS E is displayed. • Increase or decrease the speed by pressing + or –. NOTE! Cruise control cannot be engaged at speeds below 35 km/h (22 mph). • Lightly pres[...]

46 Instruments and controls Windscreen wipers A. W indscreen and headlamp washers B. Rain sensor - on/off C. Thumb wheel D. No function Windscreen wipers off The windscreen wipers are off when the stalk is in position Single sweep Move the stalk up to make a single sweep. Right-hand steering wheel stalk Intermittent wiping The number of sweeps per [...]

47 Instruments and controls To switch off the rain sensor, either: • press the button (B) • change the wiper program by moving the stalk to another position. The rain sensor switches off automatical ly when the ignition is switched off. C – Thumb whee l The thumb wheel is used to adjust the number of sweeps per interval when Intermittent wipi[...]

48 Instruments and controls Steering wheel adjustment The steering wheel can be adjusted for both rake and reach. 1. Fold down the lever by the steering column to release the steering wheel. 2. Adjust the steering wheel to the position that suits you best. 3. Fold the lever bac k to secure the steering wheel positio n. If the lever is hard to move,[...]

49 Instruments and controls Parking brak e ( handbrake) The lever is located between the front seats. The parking brake holds the rear wheels. The warning symbol in the combined instrument panel lights when the brake is applied. The warning symbol lights even if the parking brake has only been applied one “ click”. Check that the lever is prope[...]

50 Instruments and controls Operation The power windows are operated using the controls in the door armrests. The ignition key must be in position or for the power windows to work. Once you have stopped driving and removed the ignition key, the windows can stil l be opened or closed as long as neither of the fro nt doors are opened. To open the win[...]

51 Instruments and controls NOTE! If the car has electric child safety locks 1 the LED indicates that these are activated. The doors cannot then be opened from the inside. 1 Optio n WARNING! Always remember to switc h off the current to the power windows (i.e. remove the ignition key) if children are left in the car unattended. Passenger seat, fron[...]

52 Instruments and controls Rearview mirror Dimming Dimming is performed with the lever (1). 2. Normal position 3. Dimming positio n. Used when the light from the vehicle behind is intrusive. Dimming, automatic dim function (option) A sensor (4) in the bottom edge of the mirror detects light coming from behind, and dims the mirror when the light is[...]

53 Instruments and controls Magnetic zones Adj u st i ng t h e zo n e The earth is divided i nto 15 magnetic zones. The compass is adjusted for the geographical area to which the car was delivered. Select a different compass area as follows: 1. T urn on the ignition. 2. Hold the button (1) depressed (use a pen, for ex ample) for at least 3 seconds.[...]

54 Instruments and controls Resetting to the neutral position Mirrors that have been moved out of position as a result of external influences must be reset to the neutral position in order for electric folding to function. Proceed as follows: • Fold in the mirrors using the L and R buttons. • Fold out the mirrors a gain using the L and R button[...]

55 Instruments and controls Opening positions The sunroof controls are located in the headlining. The sunroof can be opened to two positions: • V entilati on position, r aised at the rear edge (A) • Sliding position, backwards/forwards (B) The ignition key must be in position I or II . WARNING! Remember to switch off the current to the sunroof [...]

56 Instruments and controls Closing using the remote control or the central loc king button Closing using the remote control or the central locking button: • Hold the lock button pressed for two seconds. The sunroof and windows close. The doors loc k. If you need to interrupt closing: • Press the lock button again. Sun screen The sunroof featur[...]

57 Instruments and controls General Personal preferences are available for some of the car's functions. Applies to locks-, climate control and audio functions. For audio functions, see page 167. Control panel A. Display B. M E N U C. EX IT D. ENTE R E. Navigation Use The settings are presented in the display (A). Open the menu to enter setting[...]

58 Instruments and controls Home safe light Selects the time the car's light should remain lit when the left-hand steering wheel stalk is pulled backwards after the ignition key has been removed. The following options can be selected: 30 / 60/90 seconds. Information • The VIN (V ehicle Identification Number) is the car's unique identity[...]

59 Climate control Climate control General information about climate control 60 Manual climate control, Air conditioning 62 Electronic climate control, ECC (option) 64 Air distribution 67 Fuel driven heater (option) 68 Additional heater (diesel) 70[...]

60 Climate control Air conditioning – A/C The climate control system cools or heats and dehumidifies the air in the passenger compartment. The car has either manual (MCC) or automatic (ECC) climate control. NOTE! The air conditioning can be switched off, but for optimal air quality in the passenger compartment and to prevent the windows from mist[...]

61 Climat e control Condensation In warm weather, condensation from the air conditioning system may drip under the car. This is normal. EC C (option) Actual temperature The temperature you select corresponds to the physical experience with reference to air speed, humidity, exposure to sun, etc. which affect the interior and exterior of the car. Sen[...]

62 Climate control Control panel 1. Fan 2. Recirculation 3. Defroster 4. A/C - On/Off 5. Ai rflow to the floor 6. Ai rflow to head and body 7. Airflow to the windscreen 8. Heated front left seat 9. Heated front right seat 10. Rear window and door mirror defrosters 11. T emp erature selector Manual climate control, A ir conditioning Functions 1. F a[...]

63 Climat e control 4. A/C - On/Off ON: Air conditioning is connected. OFF: Air conditioning (A/ C) system disconnected. If Defroster (3) is activated the air conditioning is always engaged. Manually selected airflow Press one of the three buttons (5), (6) or (7). Selected airflow is opened completely. A symbol in the display above the climate cont[...]

64 Climate control 1. Auto -On/Off 2. Fan 3. Recirculation 4. Defroster 5. Airflow to the floor 6. Airflo w to head and body 7. Airflo w to the windscreen 8. E C C - ON /O F F 9. Heated front seat, left 10. Heated front seat, right Electronic climate control, ECC (option) 11. Rear window and door mirror defrosters 12. T emp erature selector Functio[...]

65 Climat e control the car recirculates for too long, there is a risk of misting on the insides of the windows. Tim e r The timer function minimi ses the risk of ice, misting and bad air - when the recirculation function is selected. See the “Personal preferences” section to activate/deactivate the function. NOTE! Recirculation is always disen[...]

66 Climate control 8. ECC ON /OFF The air conditioning system is controlled automatically by the system when the ON LED is lit. This way, incoming air is cooled and dehumidified sufficiently. The air conditioning (A/C) system is disengaged when the OFF LED lights. Other functions are still controlled automatically. When Defroster (4) is selected, t[...]

67 Climat e control Air distribution Air distribution Use: Air distribution Use: Air to windows. T here is a certain amount of airflow to the air vents. The air is not recirculated. Air conditioning is alw ays connected. to remove ice and misting quickly . Air to the floor and windows. There is a certain amount of airflow to the air vents. to ensur[...]

68 Climate control General information about heaters The parking heater can be started immediately or set with two different start times using TIMER 1 and TIMER 2. Here, start time refers to the time the car should be heated and ready. The car’s electronic system calculates when heating should be started based on the outside temperature. There wi[...]

69 Climat e control Setting TI M E R 1 and 2 For reasons of safety, you can only programme times for the following 24 hours, not several days in a row. 1. Use the thumb wheel to scroll to TI M E R 2. Press the R E SET button briefly to se lect the flashing hours setting . 3. Use the thumb wheel to scroll to the required hours. 4. Press the R E SET [...]

70 Climate control Additional heater (certain markets) In certain conditions, diesel cars may require extra heating to ensure sufficient heating in the passenger compartment. The additional heater is fully automatic and only starts when it is sufficiently cold. When the additional heater is running, it is indicated by an information symbol on the d[...]

71 Interior Interior Front seats 72 Interior lighting 74 Storage compartments in the passenger compartment 76 Rear seat 78 Cargo compartment 80 Warning triangle 81[...]

72 Interior Seating position The driver and passenger seats can be adjusted to the optimum sitting and driving positions. 1. Forwards/backwards, lift the handle to set the correct distance to the steering wheels and pedals. Check that the seat has locked into position after adjusting. 2. Raise/lower the front edge of the seat cushion, pump up or do[...]

73 Interior Power seat (option) Prep arations The seat can normally only be adjusted if the ignition - key is in position I or II . It can also be adjusted within 10 minutes of the doo r being unlocked with the key or remote control. If the door is closed and the ignition key is not yet in the ignition, or the ignition is in position 0 , settings c[...]

74 Interior A. Lighting left-hand side. B. Switch. C. Lighting right-hand side Lighting front seat The lighting in the front section of the passenger compartment can be controlled using the buttons in the roof console. Three positions can be selected for lighting the entire passenger compartment using switch (B) 1. Off - left-hand side pressed, pas[...]

75 Interior V a nity mirror The lamp comes on automatically when the cover is lifted.[...]

76 Interior Storage compartments in the passenger compartment[...]

77 Interior 1. Cen tre console locker (also at the front edge of the front seat, seat cushions.) 2. Door panel compartme nt 3. Ticket clip. 4. Glove box. 5. W aste basket (accessory). 6. Stor age compartment and cup holder. 7. Stor age compartment and cup holder. WARNING! Waste paper basket (5) must n ot be installed if the handset is mounted on th[...]

78 Interior IMPO R T A N T ! The head restraints can be damaged if they are not removed when loading. The centre head restraint must be removed when transporting he avy loads. Rear seat Hanging up seat belts Tipping the rear seat bac krest The rear seat backrests can be folded forwards, either together or individually, to make it easier to transpor[...]

79 Interior Folding the bac krest 1. Pull the str aps to fold the seat cushions forwards. 2. Pull the latches up and forward to detach the bac krest. A red mark on the latches indicates that the bac krest is not in the locked position 3. Fold the backrest halfway forward and remove the outer head restraints. The head restraint in the centre seat mu[...]

80 Interior Load retaining eyelets The load retaining eyelets are used to secure the restraining strap or net holding goods in the cargo compartment. Cargo compartment Electric sock et, cargo compartment (option) Fold down the cover to access the electric socket. This operates regardless of whether the ignition is switched on or not. If the ignitio[...]

81 Interior Setting up the warning triangle 1 Follow the applicable regulations for the use of warning triangl es. 1. Release the cover cont aining the warning tri angle. It is secured with V elcro. 2. Remo ve the warning triangle from its case (A). 3. Fold out the four support legs on the warning triangle. 4. Fold out both red sides of the warning[...]

82 Interior[...]

83 Locks an d alarm Loc ks and alarm Remote control with key blade 84 Locking and unlocking 87 Child safety locks 89 Alarm (option) 90[...]

84 Locks and alarm Remote control The car is supplied with two remote controls. These also work as ignition keys. The remote controls contain detachable metal key blades for mechanical locking/unlocking of the driver's door and glove co mpartment. A separate label with the code of the key blade is supplied. Store the label in a safe place. Tak[...]

85 Lock s and alarm 5HPRYLQJWKHNHEODGH 2SHQ WKH NH EODGH RXW RI WKH UHPRWH FRQWURO f 6OLGHWKHVSULQJORDGHGFDWFKWRWKH VLGHZKLOVWSXOOLQJWKHNHEODGHRXW WRWKHUHDU  ,QVWDOOLQJWKHNHEODGH %HFDUHIXOZKHQSXWWLQJWKHNHEOD[...]

86 Locks and alarm Changing the remote control battery If the locks repeatedly fail to react to signals from the remote control at a normal distance, the battery should be replaced (type CR 2032, 3 volt). 1. Pull out the key blade. 2. Place the remote control with the keypad downwards. Remove the screw (1) using a small screwdriver . 3. Remove the [...]

87 Locks and a larm Locking/unloc king from outside the car The remote control can be used to lock or unlock all the car doors and the boot lid at the same time. The doors can be unlocked using the detached key blade. Automatic re-loc king If none of the doors or the boot lid are opened within two minutes of unlocking, all locks re- lock automatica[...]

88 Locks and alarm Locking the glovebo x The glovebox can only be locked and unlocked using the detachable key blade on the remote control. 1. Unlock the glovebo x by turning the key a quarter of a turn (90°) anti-clockwise. The key hole is vertical when unlocked. 2. Lock the glove compartment by turning the key a quarter of a turn (90°) clockwis[...]

89 Locks and a larm Manual lock in the left-hand rear door Locks in the doors, rear To lock manually: The controls for the child safety locks are in the rear edges of the rear doors and are only accessible when the door is open. Use the key blade to turn the control and thus activate or deactivate the child safety locks. A: The doors cannot be open[...]

90 Locks and alarm The alarm system When the alarm is armed, it contin ually monitors all alarm points. The alarm is triggered if: • a door , the bonnet or boot lid is opened • the boot lid is opened • a non-approved key is used in the ignition or if an attempt is made to force the lock • movement is detected in the passenger compartment (i[...]

91 Locks and a larm Switc hing off a triggered a larm • Press the U N L OC K button on the remote control. Two short flashes of the direction indicators are given as confirmation. Al ar m s i gn a l s The following happens if the alarm is triggered: • A siren sounds for 30 seconds. It has its own battery which is engaged i f the car battery has[...]

92 Locks and alarm T esting the bonnet 1. Get into the car and deactivate the motion sensor . 2. Activate the alarm. Remain in the car and lock the doors with the button on the remote control. 3. W ait 30 seconds. 4. Open the bonnet with the handle under the dashboard. The alarm should now sound and flash. 5. Deactivate the alarm by unlocking with [...]

93 St arting and driving Starting and driving General 94 Refuelling 95 Starting the car 96 Manual gearbox 98 Automatic gearbox (option) 100 Automatic gearbox (option) 101 Brake system 103 Stability system 105 Towing and transportation 107 Start assistance 109 Driving with a trailer 110 Towing bracket 112 Detachable towbar 114 Loading 117 Adapting l[...]

94 Starting and driving Economical driving Economical driving results from driving gently with anticipation and adapting your driving style and speed to the prevailing conditions. • Run the engine to oper ating temper ature as soon as possible. • Do not let the engine idle, but drive at light load as soon as possible. • A cold engine consumes[...]

95 Starting and driving Switch off the fuel driven heater before refuelling. Opening the fuel filler flap The fuel tank filler flap is unlocked and opened using the central button under the light switch on the dashboard. The flap is folded out. Closing Press the flap into the body until it clicks. Emergency openin g If the flap does not open, it ca[...]

96 Starting and driving Depending on the engine temperature when starting, the engine speed after a cold start may be higher than normal for certain engine types. Volvo strives to minimise exhaust emissions by having the engine exhaust system reach the correct operating temperature as quickly as possible. NOTE! Never rev the engine hard immediately[...]

97 Starting and driving If the front wheels are be turned in such a way that there is tension in the steering wheel lock a warning message is displayed and the car cannot be started. Remove the ignition key, turn the steering wheel so that the steering wheel lock is released. Insert the key and make a new start at tempt. Make sure the steering whee[...]

98 Starting and driving Gear positions, five speed Depress the clutch pedal fully with each gear change. Remove your foot from the clutch pedal between gear changes. F ollow the appropriate shifting pattern. Use the higher gears as often as possible to achieve the best possible fuel economy. Manual gearbox Reverse gear inhibitor Only engage reverse[...]

99 Starting and driving Reverse gear inhibitor Only engage reverse gear when the car is stationary. The gear selector lever must first be moved to neutral N before reverse gear can be engaged. Reverse cannot be directly selected from fifth gear due to the reverse gear inhibitor. Gear positions, six speed (diesel) Depress the clutch pedal fully with[...]

100 Starting and driving Cold start When starting in low temperatures, shifting may feel harder. This is due to the viscosity of the gearbox oil at low temperatures. To minimise engine emissions, the gearbox shifts up later than normal if the engine has been started at low temperature. NOTE! Depending on the engine temperature when starting, the en[...]

101 Starting and driving Gear selector inhibitor The gear lever can be moved freely forwards or backwards between N and D . Other positions are locked with a latch which is operated by the inhibitor button on the gear selector. The lever can only b e moved when the engine is running. Press the inhibitor button to move the gear selector lever forwar[...]

102 Starting and driving W – Winter Use the button to engage or disengage the winter program W . The program is activated if an LED is lit in the button. The winter program makes it easier to drive at low speeds in slippery road conditio ns. When the program is engaged, the driving wheels utilise less power than normal and all upshifting occurs a[...]

103 Starting and driving If the brake servo is not working If the car is rolling or being towed with the engine switched off, approximately 5 times more pressure must be applied to the brake pedal than when the engine is running. The brake pedal feels rigid and hard when the brake servo is not operating. Brake circuits The symbol lights if a brake [...]

104 Starting and driving WARNING! If the BRAKE and ABS warning symbols light at the same time, there may be a problem in the brake system. If the brake fluid level is normal in these circumstances, drive carefully to the nearest Volvo workshop to have the brake system checked.[...]

105 Starting and driving • The Tr a c t i o n C o n t r o l function transfers power from the spinning drive wheel to the drive wheel which has grip. T o increase forward tr action in thi s situation, you may need to depress the accelerator more than usual. A pulsing sound is heard when T r action Control is working. This is completely normal. T [...]

106 Starting and driving STC or D STC button The button in the centre console is used to deactivate or reactivate the STC (Stability and traction control)/DSTC (Dynamic stability and traction control) system. The LED in the button is lit when the system is activated. The LED in the button goes out when the stability system functio n has reduced. Ot[...]

107 Starting and driving Never tow the car to jump start it Use a booster battery if the battery is discharged and the engine will not start. Do not tow the car to jump start it To w i n g Before towing the car, check the highest permitted legal speed for towing. 1. Insert the key in the ignition switch in position I and unlock the ignition loc k s[...]

108 Starting and driving 4. After use, unscrew the towing eye and place it in the cargo compartment. Reinstall the cover on th e bumper . IMPO R T A N T! The towing eye is only intended for towing on roads, not for recovery after driving into a ditch etc. Call professional help for recovery.[...]

109 Starting and driving Starting with another battery If the car battery has discharged, the power from either a free standing battery or the battery from another car can be used. Always check that the clamps on the starting cable are secure so that there are no sparks duri ng the start attempt. When using another battery to assist starting the fo[...]

110 Starting and driving General If the towing bracket is a Volvo factory installation, the car is delivered with the necessary equipment to drive with a trailer. • The car’s towing bracket must be of an approved type. • If retrofitting, chec k with your V olvo dealer to ensure that the car is fully equipped to drive with a trailer. • Incre[...]

111 Starting and driving Automatic gearbo x Parking on a hill: • Apply the handbr ake. • Move the gear selector to P , the parking position. Starting on a hill: • Move the gear selector to D , the drive position. • Release the handbrake. Steep ascents: • Select an appropriate gear position when driving up steep ascents or at low speed. Th[...]

112 Starting and driving T owbars The connector pin must be cleaned and lubricated with grease regularly. When ball hitch with vibration damper is used there is no need to grease the connection pin. If the car is equipped with a detachable tow hitch the installation instructions for installing the connector pin must be followed closely. See page 11[...]

113 Starting and driving Distance B Fixed towbar: 72 mm (2.8 inches) Detachable towbar: 72 mm (2.8 inches)[...]

114 Starting and driving Installing the connector pin 1. Remo ve the cover plug. Detachable towbar 2. Che ck that the mechanism is in the unlocked position by turning the key clockwise. 3. Check that the indicator window is showing red.[...]

115 Starting and driving 4. Insert and slide in the towball section until it clicks. NOTE! The trailer's safety cable must be fastened to the attachment in the towing bracket. 5. Check that the indicator window is showing green. 6. T urn the key anti-clockwise to the locked position. Remove the key from the lock.[...]

116 Starting and driving 1. Insert the key and turn it clockwise to the unlocked position. 4. Slide in the cover plug. Removing the connector pin 2. Press in the locking knob and turn it anti- clockwise until it clic ks. 3. Continue turning the lock knob as far as it will go. Hold it down at the same time as pulling the towball section out.[...]

117 Starting and driving Loading the cargo compartment Turn off the engine and apply the parking brake when loading or unloading long objects. The gear lever or gear selector can be knocked out of position by long cargo, causing the car to move off. Seats can be folded down and head restraints removed to extend the cargo compartment. Position all c[...]

118 Starting and driving A. Light pattern for left hand drive traffic B. Right hand drive tr affic Correct light pattern. The light pattern of the headlamps can be adjusted to prevent blinding the onco ming traffic when driving with the wrong light pattern. The correct light pattern gives effective illumination of the edges of the road. Ad apting l[...]

119 Wheels and tyres Wheels and tyres General information 120 Tyre pressure 123 Changing wheels 124 Spare Wheel and tools 127 Tyre Sealant System (certain markets) 128[...]

120 Wheels and tyres Driving ch aracteristics and tyres Tyres affect driving characteristics greatly. Tyre type, size and tyre pressure are important to how the car performs. When replacing tyres, be sure to use the same type, size and brand on all four wheels. Otherwise the handling of the car could be affected. Follow the recommended tyre pressur[...]

121 Wheels and tyres NOTE! Consult a Volvo dealership for advice on the most suitable rims and tyre types. Studded tyres Studded winter tyres should be carefully broken in over a distance of 500-1000 km (300 – 600 miles) so that the studs become properly positioned in the tyre. This gives the tyre, especially the studs, a longer life. NOTE! Regul[...]

122 Wheels and tyres Aluminium rim – high nut Only the high type of nut can be used for aluminium rims. This is considerably different from other types of nut because it has a rotating conical thrust washer. Tighten to 85 Nm. Check torques using a torque wrench. NOTE! This nut can also be used on steel rims. Lock able wheel nut If steel rims with[...]

123 Wheels and tyres Recommended tyre pressure The decal located on the inside of the fuel filler flap indicates the correct tyre pressure. Your car is fully approved, which means that you may not deviate from those dimensions and performance ratings indicated in the vehicle registration. The only exceptions to these regulations are winter and stud[...]

124 Wheels and tyres The arrow shows the direction of rotation of the tyre Summer and winter wheels When shifting between summer and winter wheels, mark the wheels to indicate where they were fitted on the car, e.g. L = left, R = right. Tyres with tread that are designed in such a way that they should only roll in one direction are marked with an a[...]

125 Wheels and tyres Place at least one warning triangle if changing a wheel on a public road. Ensure that the car and jack are on a secure flat surface. 1. T a ke out the spare wheel, jack and wheel brace. These are under the carpet in the cargo compartment. 2. Apply the handbr ake. If the car is manual, engage first gear . Select P if the car is [...]

126 Wheels and tyres The car's original jac k Only use the car's original jack when replacing a wheel. All other work on the car must be carried out using workshop jacks and axle stands under the part of the car that is raised. The jack screw should be kep t well lubricated. Fitting the wheel 1. Clean the mating surfaces on the wheel and [...]

127 Wheels and tyres Spare wheel/T yre Sealant System, jac k and wheel brace The spare wheel or Tyre Sealant System with a compressor, the jack and the wheelbrace are placed under the floor in the cargo compartment. Taking out the Tyre Sealant System: 1. Pull up the floor mat, front and rear . 2. Lift up the Tyre Sealant System. Taking out the spar[...]

128 Wheels and tyres General Cars not fitted with a spare wheel have been supplied with a Tyre Sealant System instead. The Tyre Sealant System comprises an electric air compressor and a container of sealing compound. The Tyre Sealant System is only intended to act as a temporary emergency repair, allowing the car to be driven at most a further 200 [...]

129 Wheels and tyres Sealing a punctured tyre 1. Remove the label about the maximum permitted speed (1) from the T yre Sealant System and attach it where the driver can clearly see it. 2. Ensure that the orange On/Off button is in the 0 position. 3. T ake the cable and the hose from the side compartment (3). 4. Unscrew the valve cap on the puncture[...]

130 Wheels and tyres NOTE! The compressor should not operate for longer than 10 minutes. Allow the compressor to cool when there is a risk of overheating. 11. Drive the car carefully approximately 10 metres forwards and backwards to distribute the sealing compound in the tyre. Repeat step 10. 12. Disconnect the hose from the tyre valve and refit th[...]

131 Wheels and tyres 3. Screw the special nozzl e (may be purchased from dealers) into place on the hose (4). Connect the hose and nozzle to the object that is to be inflated. 4. Connect the connector (5) to the car's 12V electrical socket. 5. St art the engine. The car must be standi ng in a well-ventil ated area. 6. St art the compressor by [...]

132 Wheels and tyres[...]

133 Car care Car care Cleaning 134 Touching up paintwork damage 136 Rustproofing 137[...]

134 Car care Washing the car Wash the car as soon as it becomes dirty. Use car shampoo. Road salt and moisture can lead to corrosion. • Thoroughly rinse dirt off the underbody of the car . • Rinse the entire car until the dirt has softened. W hen using a high pressure washe r: Make sure that the nozzle of the high pressure washer does not come [...]

135 Car care Cleaning seat belts Use water and synthetic detergent. Polishing and waxing Polish and wax the car when the paintwork is dull or when you wish to give the paintwork extra protection. The car does not need to be polished until it is at least one year old. However the car can be waxed during this time. Do not polish or wax surfaces warme[...]

136 Car care Pai nt Paint is an important part of the car’s rustproofing and should therefore be checked regularly. To avoid the onset of rust, damaged paintwork must be rectified immediately. The most co mmon types of damage to paintwork are stone chips, scratches and marks on the wing edges and doors for example. Colour code It is important tha[...]

137 Car care Checks a nd maintenance Your car received a thorough and complete rustproofing at the factory. Parts of the body are made of galvanised sheet metal. The underbody is protected by a wear-resistant anti-corrosion compound. A thin, penetrative rustproofing liquid was sprayed into the members, cavities and closed sections. Maintaining the [...]

138 Car care[...]

139 Maintenance and service Maintenance and service Volvo Service 140 Maintaining your car yourse lf 141 Bonnet and engine compartment 142 Diesel 144 Oils and fluids 145 Wiper blades 148 Battery 149 Bulb types 151 Replacing front bulbs 152 Replacing rear bulbs 155 Replacing inner bulbs 156 Fuses 158[...]

140 Maintenance and service V olvo service programme Before the car left the fact ory, it was thoroughly test driven. It was checked again in accordance with Volvo Car Corporation regulations before it was handed over to you. To keep your Volvo as safe and reliable as possible, follow the Volvo service programme specified in the Service and Warrant[...]

141 Maintenance and service B efore starting work on the car The battery • Check that the battery cables are correctly connected and tightened. • Never disconnect the battery when the engine is running (e.g. when replacing the battery). • Never use a fast charger to charge the battery . The battery cables should be disconnected while charging[...]

142 Maintenance and service Opening the bonnet Open the bonnet: • Pull the handle on the far left under the dashboard. Y ou will h ear when the catch releases. • Insert your hand in the centre of the front edge of the bonnet and press up the safety catch handle. • Open the bonnet. WARNING! Check that the bonnet catches engage properly when cl[...]

143 Maintenance and service Check regularly Check the following at regular intervals, for example, when filling up: • Coolant - The level must be between the M I N and MAX marks on the expansion ta nk . • Engine oil - The level should be between the M I N and MAX marks. • Power steering fluid - T he level should be between the M I N and MAX m[...]

144 Maintenance and service Fue l system Diesel engines are sensitive to contaminants. Only use diesel from a well-known oil company. Never fill up with diesel if the quality is dubious. The large oil companies also produce a special diesel for use when the outside temperature is around freezing . This fuel is less viscous at low temperatures and r[...]

145 Maintenance and service Dipstick, petrol engines Changing the oil and oil filter There are instructions in the Service and Warranty Manual indicating the replacement intervals for oil and oil filters. Shorter intervals are recommended if driving in adverse conditions. See page 140. Check the oil level The engine oil level must be checked and th[...]

146 Maintenance and service • T op up with engine oil if necessary . If the level is close to the M I N mark, top up using 1.0 litre of oil. Run the car to operating te mperature and switch off the engine. W ait 10-15 minutes and chec k the level again. T op up until the oil level is nearer the MAX mark than the MIN m ar k . IMPO R T A N T ! Neve[...]

147 Maintenance and service Check the coolant regularly The level must be between the MIN and MAX marks on the expansion tank. If the system is not filled sufficiently, high local temperatures could occur, causing a risk of damage (cracks) to the cylinder head. Top up the coolant when the level falls to the MIN mark. NOTE! The engine must only be r[...]

148 Maintenance and service Replacing wiper blades 1. Fold out the wiper arm and fold out the wiper blade at 90° to the wiper arm. 2. Pull the wiper blade off the shaft, straight to the side. 3. Slide in the new wiper blade, at 90º to the wiper arm. 4. Fold in the wiper blade under the met al plate and fold the wiper arm down. NOTE! The wiper bla[...]

149 Maintenance and service Battery care The service life and function of the battery can be affected by numerous starts, discharges, driving styles, conditio ns and climate conditions etc. For the battery to function satisfactorily, consider the following: • Regularly chec k that the battery fluid level is correct (A). • Check all cells. Use a[...]

150 Maintenance and service Replacing the battery 1. Switch off the ignition and remove the key . 2. Unscrew the cover over the battery. 3. W ait at least 5 minutes before touching any electrical terminals (so that the information in the car’s electrical system can be stored in the different control modules). 4. Remove the cover and unscrew the f[...]

151 Maintenance and service Bulbs in the c ar 1. Di pped beam 55W H7LL 2. Bi - Xenon (option) gas discharge lamps 35W D2S 3. Main beam 55W H B3 4. Br ake lamp, Fog lamp, rear P21W 5. Direction indicator, rear + front (yellow) PY21W 6. T ail lamps, Position/ parking lamps, Side marker lamps W5WLL Lamp types Environment Bi- Xenon lamps contain a smal[...]

152 Maintenance and service Removing the bulb holder All front bulbs (except for fog lamps) are replaced by disconnecting and removing the lamp housing via the engine compartment. WARNING! If the car is equipped with Bi-Xenon headlamps, all work on the headlamps must be carried out by a Vol vo workshop. Bi-Xenon headlamps require great care due to [...]

153 Maintenance and service Dipped beam Fitting the bulb 1. Install the new bulb. It can only be fitted in one positi on. 2. Press the spring clamp up and a little to the left so that it snaps into place. 3. Press the connector back into position. 4. Reinstall the plastic cover. 5. Reinstall the lamp housing. Main beam 1. Remove the entire lamp hou[...]

154 Maintenance and service Direction indicator 1. T wist the bulb holder anti-clockwise and remove it. 2. Press the bulb inw ards, turn it anticlockwise and remove it from the bulb holder . 3. Replace with a new bulb and reinstall the bulb holder in the lamp housing. Side marker lamps 1. T wist the bulb anticlockwise, pull it out and replace the b[...]

155 Maintenance and service Removing the bulb holder All bulbs in the rear lamp cluster can be replaced from inside the cargo compartment 1. Switch off all lights and turn the ignition key to position 0. 2. Remove the hatc hes in the left/right panels to access the bulbs. These bulbs are placed in a common bulb holder. 1. Disconnect the connector f[...]

156 Maintenance and service Courtesy lighting There is courtesy lighting under the dashboard on the driver and passenger sides. 1. Insert a screwdriver and gently turn so that the lens detaches. 2. Remove the faulty bulb. 3. Install the new bulb. 4. Reinstall the lens. Replacing inner bulbs Cargo compartment 1. Insert a screwdriver and gently turn [...]

157 Maintenance and service Installing the mirror glass: 1. First press the three lugs at top edge of mirror glass back into position. 2. Then press the three lower lugs back into position.[...]

158 Maintenance and service All electrical functions and components are protected by number of fuses to protect the car’s electrical system from damage by shor t- circuits or overloads. The fuses are in two different locations in the car: • Relay/fuse box in the engine compartment. • Relay/fuse box in the passenger compartment. Replacement If[...]

159 Maintenance and service Fuse positions in the relay/fuse bo x in the engine compartment 1. Radiator fan, 50A 2. Power steering, 80A 3. Supply to the fuse bo x in the passenger compartment, 60A 4. Supply to the fuse bo x in the passenger compartment, 60A 5. Element climate control unit, 80 A 6. Glow plugs (diesel), 60 A 7. AB S pu mp, 30 A 8. AB[...]

160 Maintenance and service Relay/fuse bo x in the passenger compartment The fuse box contains 56 fuse positions. The fuses are located under the glove compartment. There are spare fuses and pliers in the in the integrated relay/fuse box in the engine compartment to assist in removing and replacing fuses. Replacing fuses: 1. Remove the interior uph[...]

161 Maintenance and service Fuse positions in the relay/fuse bo x in the passenger compartment 37 Spare position 38. Spare position 39. Spare position 40. Spare position 41. Spare position 42. Spare position 43. T elephone, audio, 1 5 A 44. S R S system, 10 A 45. Electric socket, rear seat, 15 A 46. Lighting in passenger compartment, glove compartm[...]

162 Maintenance and service[...]

163 Infot ainment Infotainment Infotainment 164 Control panel 165 Audio functions 167 Radio functions 169 CD/MD (option) 175 CD changer (option) 176 Menu settings and selections - Audio 178 Telephone functions (option) 180 Telephone functions 182 Menu settings and selections - Telephone 188[...]

164 Infotainment Audio and t elephone system (option) Infotainment is a system with integrated audio and telephone functions. The infotainment system can be used easily and conveniently using the common control panel or the steering wheel keypad. The control panel display indicates the present function. The system can be equipped with Dolby Surroun[...]

165 Infotainment Control panel centre console Control panel 1. POWE R – Audio On/Off 2. PH ON E – T elephone on/off/ standby 3. VOLU M E – Controls the volume 4. CD/ M D – Changes between C D or MD 5. AM / F M – Shortcut button to switch between FM1, FM2 and AM 6. M E N U – Opens the main menu 7. E NTE R – Select in the menu, activate[...]

166 Infotainment Steering wheel keypad Steering wheel keypad (opt ion) The four buttons at the bottom of the steering wheel keypad control both the radio and the telephone. The function of the button depends on which system is active. The steering wheel keypad can be used to adjust volume, shift between preset stations and change CD/MD tracks. The [...]

167 Infotainment Audio On/Off Press the POWER button to switch the audio system on or off. If the audio system is active when the ignition is switched off, it will reactivate automatically when the car is restarted. Selecting the sound source Use the CD/MD and AM/FM quick selection buttons when selecting the sound source. • Press the AM / FM butt[...]

168 Infotainment dashboard provides a more realistic audio experience. The normal left and right stereo channels are divided into left-centre-rig ht. In additio n, ambient surround sound is produced b y the rear loudspeaker channels . Dolby Surround Pro Logic II functions in CD and MD modes. 3-Channel stereo is recommended for AM and FM radio broad[...]

169 Infotainment Station search 1. Select r adio mode AM, F M1 or F M2 using the AM / FM button. 2. B riefly press the left or right arrow on the navigation button to searc h for the next strong station. 3. Press one of the arrows again to make a new search. Manual station searching There are two ways of searching for a station manually. • T urn [...]

170 Infotainment This function automatically searches for the next strong AM or FM station sig nals. When the radio finds a station, scanning is interrupted for approximately 8 seconds. S PI searching (aut omatic search for transmitter) PI search is shown in the display when reception is poor. The radio automatically searches for the strongest tran[...]

171 Infotainment Set traffic information from a special channel: 1. Select r adio mode using the AM / F M button . 2. Activate the st ation from which traffic information is to be received. 3. Press M E N U. Select the menu for the present sound source and press E NTE R. 4. Sel ect Advanced r adio settings in the menu and press ENTE R. 5. Select TP[...]

172 Infotainment TP searching This function allows you to listen to traffic information when travelling between different areas and countries without needing to select a station. 1. Press M E N U. 2. Select present source. 3. Select Advanced radio setti ngs in the menu and press E NTE R. 4. Select TP and press E NTE R. 5. Select TP searching and pr[...]

173 Infotainment Leisure and hobby Leisure and hobby Jazz music Jazz music Country music Country music National music National music Golden oldies Golden oldies Folk music Folk music Documentary Documentary Search for a specific programme type Search through the entire wave band: 1. Select FM 1 or FM 2 and press the MENU bu t t on . 2. Select the m[...]

174 Infotainment 3. Select Advanced radio settings in the menu and press E NTE R. 4. Select EO N and press E NTE R. 5. Select Local, Distant or Off and press EN T ER . Resetting R D S functions Restores all radio settings to the original factory settings. 1. Press M E N U. Select the menu for the present sound source and press EN T ER . 2. Select A[...]

175 Infotainment Starting the CD / M D player (option) Start the CD/MD player by pressing the CD/ MD button. Insert a disc in the player. CDs If the quality of the CD does not comply with the requirements of standard EN60908 or if it has been recorded using poor equipment, sound quality may be poor or playback interrupted CD / M D (option) Changing[...]

176 Infotainment Starting the CD c hanger The CD changer can hold up to six discs. Starting the CD changer: 1. Press the C D/ M D button. 2. Sel ect an empty position using the 1-6 buttons (or up/down using the navigation button). The display shows which positions are empty . 3. Insert a disc into the changer . Ensure that Insert disc is displayed [...]

177 Infotainment Disc text Some CDs have title information. The information is displayed as text in the display. Activate Disc tex t: 1. Press M E N U. Select the menu for the present sound source and press E NTE R. 2. Select Disc text in the menu and press EN T ER . 3. If information is stored on the disc, it will now appear in the disp lay . Deac[...]

178 Infotainment FM1/ FM2 menu 1. News Off/On* 2. TP Off/On* 3. PTY 3.1. Select PTY 3.1.1. Reset all PTY's 3.1.2. Current affairs On*/Off 3.1.3. Information On/Off* 3.1.4. Sport On/Off* 3.1.5. Education On/Off* 3.1.6. Theatre On/Off* 3.1.7. Documentari es On/Off* 3.2. Search PTY 3.3. Display PTY On/Off 4. Radio text On /Off* 5. Advanced r adio[...]

179 Infotainment CD ch anger menu 1. Random 1.1. Off* 1.2. One disc 1.3. All discs 2. News (Off*) 3. TP (Off*) 4. Disc text (Off*) 5. Sound settings 5.1. Surround AM / F M (option) 5.1.1. Dolby Pro Logic I I 5.1.2. 3 channel stereo 5.1.3. Off* 5.2. Surround CD/ M D (accessory) 5.2.1. Dolby Pro Logic I I* 5.2.2. 3 channel stereo 5.2.3. Off 5.3. Sub-[...]

180 Infotainment T elephone system components T elephone functions (option)[...]

181 Infotainment 1. Antenna The antenna is on the roof. 2. Steering wheel keypad The majority of the telephone functions can be controlled using the keypad. W hen the telephone is active, the keypad can only be used for telephone functions. There is always telephone information in the display when the telephone is activated. 3. Microphone The hands[...]

182 Infotainment SIM c a r d The telephone can only be used with a valid SIM card (Subscriber Identity Module). The card is managed by different network operators. Contact your network operator if you experience difficulties with the SIM card. Insert the SIM card to start using the telephone. 1. Switch off the telephone. 2. Open the gl ovebox and t[...]

183 Infotainment Control panel centre console 1. PH O N E – On/off/st andby. 2. M E N U – Open the main menu. 3. E NTE R – Accept a call, make a menu selection or activate the telephone from standby mode. A short press of the E NTE R button displays the last dialled number . 4. E X IT – T erminate/reject a call, scroll back in the menu, can[...]

184 Infotainment Switc h When the telephone system is active or in standby mode, a handset is shown in the display. If the car’s ignition i s switched off while the telephone system is on, the system will be o n the next time the ignition is switched on. No calls can be received when the telephone system is switched off. Activate: 1. Press P H ON[...]

185 Infotainment Privacy handset (option) Making a call using the handset: 1. Sel ect the desired telephone number using the centre conso le keypad and lift the handset to make the call. Press the handset down before lifting. 2. The call is cancell ed when the handset is replaced in the holder. Adjust the volume using the dial on the side of the ha[...]

186 Infotainment Use the navigation button to scroll and press ENTER to make a selection. Several functions are available during a call while another call is on hold. Use the navigation button to scroll and press ENTER to make a selection. Secret mode/ Secret mode off Secret mode Park/ Resume Choo se if the current call is to be held or resumed Han[...]

187 Infotainment Enter a name/message Press the button with the relevant character. Press once for the first c haracter, twice for the second character and so on. Press 1 for space. 1 space 1- ? ! , . : " ' ( ) 2 a b c 2 ä å à æ ç 3 d e f 3 è é 4 g h i 4 ì 5j k l 5 6 m n o 6 ñ ö ò Ø 7 p q r s 7 ß 8 t u v 8 ü ù 9 w x y z 9 *[...]

188 Infotainment T elephone menu 1. Call log. - CALL 1.1. Missed calls 1.2. Received calls 1.3. Outgoing calls 1.4. Erase list 1.4.1. All calls 1.4.2. Missed calls 1.4.3. Received calls 1.4.4. Outgoing calls 1.5. Call dur ation 1.5.1. Last call 1.5.2. Number of calls 1.5.3. T ot al time 1.5.4. Reset time 2. Messages 2.1. Read 2.2. W rite 2.3. Messa[...]

189 Infotainment Menu 2. Messages Menu 3. Phone book Menu 4. Call options Menu 5. Telephone settings 1.2. Received calls List of received calls. Y ou can choose to call, erase or store the number in the phone book. 1.3. Outgoing calls List of dialled numbers. Y ou can choose to call, er ase or store the number in the phone book. 1.4. Erase list Era[...]

190 Infotainment 4.1. Tr a n s m i t number Select whether or not your own number should be displayed to the person you call. Contact yo ur network operator regarding ex-directory numbers. 4.2. Call waiting Select whether or not you want to be alerted during a phone call that there is another incoming call. 4.3. Automatic answer T o automatically r[...]

191 Specifications Specifications Type designations 192 Measurements, weights, capacities 193 Lubricants 195 Catalytic converter 197 Fuel 198 Electrical system 199 Engine specifications 200[...]

192 Specifications T ype designations When contacting your Volvo dealer and whe n ordering spare parts and accessories for your car, it makes things easier if you know your car’s type designation, vehicle identification number and engine number. 1. The VIN (T ype and model year designations and chassis number) is stamped in the engine comp artmen[...]

193 Specifications Capacities Fuel tank litres Petrol 62 Diesel 52 Engine oil (with filter replacement) litres 2.4 + 2.4i approx. 5.8 T5 approx. 5.8 2.0D approx. 5.5 Gearbox oil litres Manual 5-speed appro x. 2.1 Manual 6-speed appro x. 2.0 Manual 6-speed diesel appro x. 1.7 Automatic appro x. 7.0 Measurements Length: 447 cm W idth: 177 cm W heelba[...]

194 Specifications Cooling system All cooling systems are closed overpr essure systems. The thermostat starts opening at 90 ºC for petrol engines and at 82 ºC for diesel engines. Miscellaneous litres W indscreen washer reservoir , 4-cyl + diesel 5-cyl. 4 6,5 Air conditioning gramme Compressor oil 180-200 Refrigerant 500-600 Engine litres 5 cyl, m[...]

195 Specifications Oil grade Petrol engines Recommended oil grade: ACEA A1 /B1 Engine oil with grade designations ACEA A3/ B3/B4 or ACEA A5//B5 may also be used. Diesel engines Recommended oil grade: WSS-M2C913B Volvo recommends Castrol® oil prod ucts. IMPO R T A N T ! Do not use extra additives. These can damage the engine. Lubricants V iscosity [...]

196 Specifications Gearbo x Manual gearbox (petrol engines) Only use Volvo’s synthetic gearbox oil or similar products with the same specifications. Manual gearbox (diesel engines) Use transmission oil WSD-M2C200-C only. Automatic gearbo x Only use Volvo recommended gearbox oil. Do not mix with any other oil. Power steering IMPO R T A N T ! Castr[...]

197 Specifications Catalytic converter The three-way catalytic converter (TWC) is an additional part of the exhaust system. Its purpose is to purify e xhaust gases. The three- way catalytic converter (TWC) primarily consists of a housing with two monoliths that are designed so that the exhaust gases pass through a honeycomb of channel s. The channe[...]

198 Specifications Pet r ol The engine can be run with octane ratings of 91, 95 and 98 RON. • 98 RO N is recommended for maximum effect and minimum fuel consumption. • 95 RO N can be used for normal driving. • 91 RO N should only be used as an exception. However, the engine will not be damaged by this fuel grade. Standard DIN 51600. Min. 91 O[...]

199 Specifications General 12 volt system with a voltage regulated alternating current generator. Single pole system in which the chassis and engine block are used as conductors. The negative pole is connected to the chassis. Battery * Cars equipped with High Performance audio level. ** Diesel cars with Premium Sound audio level, fuel-driven heater[...]

200 Specifications 2.4i 2.4 T5 2.0 D B5244S4 B5244S5 B5254T3 D4204T Output (kW/rps) 125/100 103/83 162/83 100/67 (hp/rpm) 170/6000 140/5000 220/5000 136/4000 T orque (Nm/rps) 230/73 220/67 320/25-80 340/33 (kpm/rpm) 23,4/4400 22,4/4000 32,6/1 500-4800 34,7/2000 No. of cylinders 5 5 5 4 Bore (mm) 83 83 83 85 Stroke (mm) 90 90 93,2 88 Cylinder displa[...]

201 Index A ABS system ....................... ................. ......... 103 ABS, indicator symbol ............... ............. ...... 36 Active Yaw Control ........... ................. ......... 105 Additional heater, diesel ............... .............. .. 70 Air conditioning, ECC ............. ................ ...... 64 Air pressure ..... .[...]

202 Index Frequency updating ............. ............. ......... 173 Fuel filler flap ...................... ............. .............. .. 41 Fuel heater ................ ................. ............. ......... 70 Fuel system ..... ............. ................ ............. ... 144 Fuses .. .............. ............. ................ ....[...]

203 Index Rain sensor ........................ ............. ................ 46 Rape Methyl Ester .. .............. ............. ......... 144 Rear fog lamp . ............. ................ ............. ...... 42 Rear windscreen defroster ....... ............. ...... 66 Rearview mirror . ............. ............. ................. .. 52 Recirc[...]

204 Index[...]

2004 S4 0 VO L VO 2004 OWN E R 'S MAN UA L S40 T P 7011 TP 7011 (English). AT 0347. Printed in Sweden, Elanders Infologistics Väst AB, Mölnlycke 2004[...]

[...]

[...]

[...]

08 Car care Cleaning 08 210 Cleaning the interior Only use cleaning agents and car care prod- ucts recommended by Volvo. Clean regularly and follow the instructions included with the car care product. Vacuuming is important prior to using cleaning agents. Carpets and cargo area Remove inlaid carpets for separate cleaning of the floor carpet and the[...]

08 Car care Cleaning 08 211 Protective treatment of leather upholstery Vacuuming is important prior to using leather care agents. 1. Pour a small amount of the protective cream on the felted cloth and massage in a thin layer of cream with gentle circular movements on the leather. 2. Allow the leather to dry for 20 minutes before use. The leather ha[...]

[...]

[...]

[...]

[...]

09 Maintenance and service Volvo service 09 216 Volvo service programme Before the car left the factory, it was thoroughly test driven. It was checked again in accord- ance with Volvo Car Corporation regulations before it was handed over to you. To keep your Volvo as safe and reliable as pos- sible, follow the Volvo service programme specified in t[...]

09 Maintenance and service Self-maintenance 09 217 Before starting work on the car Battery Check that the battery cables are correctly connected and tightened. Never disconnect the battery when the engine is running (e.g. if replacing the battery). Never use a quick charger to charge the bat- tery. The battery cables must be disconnected when charg[...]

[...]

[...]

09 Maintenance and service Oils and fluids 09 220 Engine compartment decal for oil grade IMPORTANT Always use oil of the prescribed grade, see the engine compartment decal. Check the oil level frequently and change the oil regu- larly. The engine will be damaged if lower grade oil is used or if the car is driven with the oil level too low. Using oi[...]

09 Maintenance and service Oils and fluids 09 `` 221 IMPORTANT In order to fulfil the requirements for the engine's service intervals all engines are filled with a specially adapted synthetic engine oil at the factory. The choice of oil has been made very carefully with regard to service life, starting characteristics, fuel consumption and env[...]

[...]

[...]

[...]

[...]

[...]

09 Maintenance and service Battery 09 `` 227 Operation The service life and function of the battery is influenced by factors such as the number of starts, discharging, driving style, driving con- ditions and climatic conditions. • Never disconnect the battery when the engine is running. • Check that the cables to the battery are correctly conne[...]

09 Maintenance and service Battery 09 228 * Option/accessory, for more information, see Introduction. Avoid sparks and naked flames. Risk of explosion. Must be taken for recy- cling. NOTE An expended battery must be recycled in an environmentally correct manner as it con- tains lead. Changing the battery Removal 1. Remove the remote control key fro[...]

09 Maintenance and service Battery 09 `` 229 Battery Start Standby Cold start capacity A , CCA (A) 760 120 Dimen- sions B , L×W×H (mm) 278×175×19 0 150×90×106 Capacity (Ah) 70 8 A In accordance with the SAE standard. B Largest possible size. NOTE • The higher the current take-off in the car (extra cooling/heating, etc.) the more the batteri[...]

09 Maintenance and service Battery 09 230 NOTE If the battery has become so discharged that everything is "black" and in principle the car does not have all the normal electri- cal functions and the engine is subsequently started using an external battery or battery charger, then the Start/Stop function will be activated. It will then be [...]

[...]

09 Maintenance and service Replacing bulbs 09 232 Fitting the lamp housing 1. Plug in the connector and refit the lamp housing and locking pin. Check that the pin is correctly inserted. 2. Check the lighting. The lamp housing must be plugged in and secured in place before the lighting is switched on or the remote control key inserted into the ignit[...]

[...]

[...]

[...]

09 Maintenance and service Replacing bulbs 09 236 * Option/accessory, for more information, see Introduction. 4. Replace the bulb. 5. Insert the connector and turn clockwise. 6. Refit the entire lamp housing and screw it into place. Cargo area G020915 1. Insert a screwdriver and gently turn so that the lamp housing comes loose. 2. Remove the blown [...]

[...]

[...]

[...]

[...]

09 Maintenance and service Fuses 09 `` * Option/accessory, for more information, see Introduction. 241 DRIVe Start/Stop* Location of fuses for the Start/Stop function. No. Component A 11M/1 Engine compartment, electrical distribution unit 125 11M/2 Sensor, battery monitor- ing 15 25 Central electronic mod- ule (CEM) (Reference voltage standby bat- [...]

[...]

[...]

[...]

[...]

[...]

INFOTAINMENT SYSTEM[...]

[...]

[...]

[...]

10 Infotainment system Audio functions 10 `` 251 Use the MODE button to select the external audio source you wish to use. 1. If USB is selected then Connect device is shown in the display. 2. Connect your iPod  , MP3 player or USB memory stick to the USB connection in the centre console's storage compartment (see preceding illustration). &g[...]