Weider 831.15707.0 инструкция обслуживания

CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manu- al for future reference. M odel No. 831.15707.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal (under seat) Sears, Roebuck and Co., Hoffman Estates, IL 60179 • Assembly • Adjustment • T roublesh[...]

W ARNING DECAL PLACEMENT 2 W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . [...]

3 W ARNING: T o reduce the risk of serious injury , read the following important precau- tions before using the weight bench. 1. Read all instructions in this manual and al l warnings on the weight bench b efore using the weight bench. Use the weight bench only as described in this manual. 2. It is the responsibility of the owner to ensure that all[...]

4 Backrest Weight Rests Upright Support Rod Seat Leg Lever Weight T ube Thank you for selecting the versatile WEIDER ® PRO 250 weight bench. The weight bench of fers an impres- sive array of weight stations designed to develop every major muscle group of the body . Whether your goal is to tone your body , build dramatic muscle size and strength, o[...]

This chart is provided to help you identify the small parts used in assembly . The number in parenthesis below each part refers to the key number of the part, from the P AR T LIST on page 14. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to s ee if it has been pre-assembl[...]

Before beginning assembly , carefully read the following information and instructions: • Assembly requires two people. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • T ighten all parts as you assemble them, unless instructed to do otherwise. • A s [...]

7 3 28 5 30 31 3 4 2. Attach one end of the Crossbar (2) to two Joint Plates (1 1, 35) with two M10 x 66mm Bolts (28) a nd two M10 Nylon Locknuts (31). D o not tight- en the Nylon Locknuts yet. Attach the other end of the Crossbar (2) in the same way . 3. Attach the Front Leg (4) to the Bench Frame (3) with an M10 x 19mm Screw (5), an M10 x 66mm Bo[...]

5. Insert the Support Rod (14) into a set of holes in the Uprights (1). T urn the Support Rod so the l ocking pin is wrapped around the Upright. T ighten the M10 Nylon Locknuts (31) and M10 x 19mm Screw (5) used in steps 1–4. 1 1 1 4 5 8 6. Lubricate the M10 x 60mm Bolt (25) with part of the included grease packet. Attach the Leg Lever (6) to the[...]

12. Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUST- MENT , beginning on page 10. 9 9. Orient the Backrest T ubes (7) with the indicated holes in the position shown. Attach the Backrest T ubes to the Backrest (8) with four M6 x 38mm Screws (32) and four M6 W[...]

ADJUSTING THE BACKREST The Backrest (8) can be used in a decline position, a level position, or two incline positions. T o use the Backrest in the decline position, remove the Support Rod (14) and lay the Backrest on the Crossbar (2). T o use the Backrest (8) in the level or inclined posi- tion, lift the Backrest and insert the Support Rod (14) thr[...]

11 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, push them close to their maximum capacity . Y our mus- cles will continually adapt and grow as you progres- sively increase the intensity of your exercise. Y ou can adjust the intensity level of an individual exercise in two w[...]

12 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout. Plan to spend the first couple of weeks familiarizing yourself wit[...]

13 NOTES[...]

Key No. Qty . Description Key No. Qty . Description 1 2 Upright 2 1 Crossbar 3 1 Bench Frame 4 1 Front Leg 5 1 M10 x 19mm Screw 6 1 Leg Lever 7 2 Backrest T ube 8 1 Backrest 9 1 Seat 10 2 Upright Cover 1 1 2 Right Joint Plate 12 2 Pad Tube 13 4 Foam Pad 14 1 Support Rod 15 2 Weight Rest 16 3 50mm Square Inner Cap 17 1 25mm Round Angled Cap 18 2 38m[...]

3 16 4 6 12 13 7 7 8 12 13 18 18 34 34 33 17 19 32 24 24 25 22 31 30 31 26 26 13 13 5 28 9 14 21 21 27 31 35 2 11 35 11 28 28 31 31 1 1 1 6 16 10 20 15 2 9 29 10 15 20 29 29 19 23 30 30 31 32 22 EXPLODED DRA WING—Model No. 831.15707.0 R 0407A 15[...]

Part No. 252484 R0407A Printed in China © 2007 ICON IP , Inc. 90-DA Y FULL W ARRANTY If this Sears WEIGHT BENCH EXERCISER fails due to a defect in material or workmanship within 90 days of the date of purchase, call 1-800-4-MY -HOME ® (1-800-469-4663) to arrange for free repair (or replacement if repair proves impossible). This warranty does not [...]