Yamaha HTR-5830 инструкция обслуживания

OWNER’S MANUAL HTR-5830 U AV Receiv er Y AMAHA ELECTR ONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANADA MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY Y AMAHA ELECTRONIQUE FRANCE S.A. RUE[...]

i IMPOR T ANT SAFETY INSTRUCTIONS CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence o[...]

ii 1. IMPOR T ANT NO TICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not e xpressly approved by Y amaha ma y void your authority , granted by the FCC, to use the product. 2. IMPOR T ANT : When connecting this product to accessories and/or a[...]

1 T o assure the finest performance, please read this manual carefully . Keep it in a safe place f or future reference. 2 Install this sound system in a well ventilated, cool, dry , c lean place — away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the lef[...]

1 INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION CONTENTS INTRODUCTION FEA TURES ............................................................. 2 GETTING ST ARTED ............................................ 3 Supplied accessories .................................................. 3 Installing batteries in[...]

2 Manufactured under license from Dolby Laboratories. “ Dolby ” , “ Pro Logic ” , and the double-D symbol are trademarks of Dolby Laboratories. “ SILENT CINEMA ” is a trademark of Y AMAHA CORPORA TION. FEA TURES Sound field features ◆ Dolby Pro Logic/Dolby Pro Logic II decoder ◆ Dolby Digital/Dolby Digital + Matrix 6.1 Decoder ◆ D[...]

3 INTRODUCTION ■ Notes on batteries • Change all of the batteries if you notice a decrease in the operating range of the remote control. • Do not use old batteries together with ne w ones. • Do not use different types of batteries (suc h as alkaline and manganese batteries) together . Read the packaging carefully as these dif ferent types o[...]

4 CONTROLS AND FUNCTIONS Front panel 1 ST ANDBY/ON T urns on this unit or sets it to the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound. Note In standby mode, this unit consumes a small amount of pow er in order to receiv e infrared-signals from the remote[...]

5 INTRODUCTION 0 V OLUME Controls the output lev el of all audio channels. This does not affect the OUT (REC) le vel. q PHONES (SILENT CINEMA) Allo ws you to enjoy DSP effects w hen listening with headphones. w SPEAKERS A/B/OFF Selects the set of front speakers connected to the A or B terminals. T o turn off the speak ers, press the button repeated[...]

6 SYSTEM POWER ST ANDBY POWER AV POWER TV POWER TV ENTER +10 0 9 STEREO /DTS 8 7 6 5 MOVIE2 MOVIE1 TV THTR MUSIC 4 3 2 1 ENTERT AINMENT ROCK JAZZ HALL V-AUX VCR D-TV/CBL DVD SLEEP TUNER MD/CD-R CD TV AMP CODE SET MUTE INPUT MUTE REC 6CH INPUT AUDIO DISC SKIP VOLUME + – + – + – CH VOL SET MENU SELECT PRESET/CH A/B/C/D/E LEVEL MENU TEST RETURN [...]

7 INTRODUCTION ■ Using the remote control The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation. ■ Handling the remote contr ol • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do no[...]

8 V-AUX VCR DTV/CBL DVD MD/CD-R TUNER CD MA TRIX DIGIT AL PCM PL PL SILENT CINEMA DSP HiFi NIGHT VIRTUAL A B SP STEREO VOLUME MUTE MEMORY TUNED L C R SL LFE SB SR ~~~~~~~~~~~~~~ dB dB ft AUTO SLEEP 13 45 8 7 6 2 90 q w y u rt i eo p a 1 Decoder indicators When any of this unit ’ s decoders function, the respective indicator lights up. 2 SILENT CI[...]

9 PREP ARA TION DIGITAL INPUT 6CH INPUT AUDIO VIDEO SPEAKERS AUDIO OUTPUT L DVD R L R FRONT SURROUND SUB WOOFER CD DTV /CBL COAXIAL OPTICAL CD IN (PLAY) MD /CD-R OUT (REC) DTV /CBL V-AUX IN VCR OUT SUB WOOFER MONITOR OUT DVD 3 2 1 L FRONT A B R L SURROUND R L FRONT CENTER R TUNER AM ANT FM ANT GND 75 Ω UNBAL. COMPONENT VIDEO P R DVD MONITOR OUT D[...]

10 DIGITAL INPUT 6CH INPUT AUDIO OUTPUT AUDIO VIDEO L DVD R L R FRONT SURROUND SUB WOOFER CENTER CD DTV /CBL COAXIAL OPTICAL CD IN (PLAY) MD /CD-R OUT (REC) DTV /CBL V-AUX IN VCR OUT SUB WOOFER MONITOR OUT DVD 3 2 1 TUNER AM ANT FM ANT GND 75 Ω UNBAL. COM P P B Y VIDEO INPUT AUDIO OUTPUT LR AUDIO INPUT LR O OPTICAL OUTPUT VIDEO OUTPUT AUDIO OUTPU[...]

11 PREP ARA TION COMPONENT VIDEO P R DVD MONITOR OUT DTV /CBL P B Y COMPONENT VIDEO Y P B P R Y P B P R Y P B P R Y P B P R ■ COMPONENT VIDEO jacks Y ou can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using COMPONENT VIDEO connections. Note • If you connect your video monitor to this uni[...]

12 6CH INPUT AUDIO VIDEO OUTPUT DIGITAL INPUT AUDIO L DVD R L R FRONT SURROUND SUB WOOFER CENTER CD DTV /CBL COAXIAL OPTICAL CD IN (PLAY) MD /CD-R OUT (REC) DTV /CBL V-AUX IN VCR OUT SUB WOOFER MONITOR OUT DVD 2 3 1 TUNER AM ANT FM ANT GND 75 Ω UNBAL. C L R AUDIO INPUT L R AUDIO OUTPUT L R COAXIAL OUTPUT C AUDIO OUTPUT L R Connecting audio compon[...]

13 PREP ARA TION ■ Connecting the AM loop antenna 1 Set up the AM loop antenna, then connect it to the terminals on this unit. 2 Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals. 3 Orient the AM loop antenna for the best reception. Notes • The AM loop antenna should be placed away from this unit.[...]

14 Connecting an external decoder This unit is equipped with 6 additional input jacks (FR ONT left and right, CENTER, SURR OUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a D VD/Super Audio CD player . Notes • When you select 6CH INPUT as[...]

15 PREP ARA TION Connecting the speakers ■ Speaker placement 60˚ 30˚ FL FR C SL SR SR 80˚ SL The speaker layout abo ve sho ws the standard ITU-R speaker setting. Y ou can use it to enjoy CINEMA DSP , multi-channel audio sources. 1.8 m (6 ft) Front speaker s (FR and FL) The front speakers are used for the main source sound plus effect sounds. P[...]

16 CONNECTIONS ■ Speaker connections Be sure to connect the left channel (L), right channel (R), “ + ” (red) and “–” (black) properly . If the connections are faulty , no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CA UTION • Use speaker[...]

17 PREP ARA TION Subwoofer with built-in amplifier Surround speaker Center speaker Right Front B speaker SUBWOOFER jac k When using a subwoofer with b uilt-in amplifier , including the Y AMAHA Active Serv o Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distrib uted f[...]

18 Connecting the power supply cord ■ Connecting the A C power cord Plug the power cord into an AC wall outlet. ■ V OL T A GE SELECT OR (Asia and General models only) The VOL T AGE SELECT OR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply . V oltages are: 110 V - 120 V/220 V - 240 V[...]

19 PREP ARA TION Switch position Upper Lower Speaker FR ONT A OR B CENTER, SURR OUND FR ONT A OR B CENTER, SURR OUND Impedance lev el The impedance of each speaker must be 6 Ω or higher . The impedance of each speaker must be 6 Ω or higher . The impedance of each speaker must be 8 Ω or higher . The impedance of each speaker must be 8 Ω or h[...]

20 Tu rning on the power When all connections are complete, turn on the power of this unit. 1 Press ST ANDBY/ON (or SYSTEM PO WER on the remote control) to turn on the po wer of this unit. The le vel of the volume, and then the current sound f ield program name appear on the front panel display . or Remote control Front panel PRESET/TUNING EDIT FM/[...]

21 PREP ARA TION Using the basic menu Use the remote control to make adjustments. • Press SPEAKERS A/B/OFF on the front panel to select the front speakers you want to use. • Make sure you disconnect headphones from this unit. 1 Press AMP . 2 Press SET MENU . “ B ASIC MENU ” appears on the front panel display . If the front panel display cha[...]

22 SET MENU B ASIC SOUND INPUT OPTION 1 SETUP Press j / i to alter the settings for each parameter . Use d to move to the ne xt setting. 2 SP LEVEL Press j / i to adjust the balance between each speaker and the front left speaker . Use d to move to the ne xt setting. 1 R OOM Choose from S/M/L. 2 SUBWOOFER Choose either of YES/NONE. 3 SPEAKERS Choos[...]

23 PREP ARA TION Setting the unit to match your speaker system Follo w the instructions below to set the amplifier output to match the size of your room and speakers. Press u / d to cycle through parameters 1 through 4, and j / i to alter the parameter setting. Factory def ault settings are highlighted. 1 ROOM Settings: S, M , L Select the size of [...]

24 PLA YBACK 1 Press ST ANDBY/ON (or SYSTEM PO WER on the remote control) to turn on the po wer . 2 T urn on the video monitor connected to this unit. 3 Press SPEAKERS A/B/OFF on the front panel to select the front speaker s you want to use. 4 Press INPUT l / h repeatedly (or one of the input selector buttons on the remote contr ol) to select the i[...]

25 B ASIC OPERA TION ■ Playing video sour ces in the background Y ou can combine a video image from a video source with a sound from an audio source. For e xample, you can enjoy listening to classical music while ha ving beautiful scenery from the video source on the video monitor . Use the input selector buttons to select a video source, then se[...]

26 Input modes and indications This unit is equipped with 2 types of input jacks. Do the follo wing to select the type of input signals you want to use. Press INPUT MODE repeatedly until the desired input mode is shown on the fr ont panel display . AUTO Automatically selects input signals in the follo wing order: 1) Digital signals* 2) Analog signa[...]

27 BASIC OPERA TION Selecting a sound field program Y ou can enhance your listening experience by selecting sound field programs. F or details about each program, see pages 30 – 33. 1 Press AMP . 2 Press one of the sound field program buttons on the remote contr ol to select the desired program. The name of the selected program appears on the fro[...]

28 ■ Playing Dolb y Digital EX or DTS ES material Press 6.1/5.1 to turn on the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder . The display changes A UTO → Matrix 6.1 → OFF each time 6.1/5.1 is pressed. AU TO : Automatically switches Dolby Digital + Matrix 6.1 and DTS + Matrix 6.1 depending on the signal. V irtual surround back speake[...]

29 BASIC OPERA TION Notes • If you turn off the sound ef fects, no sound is output from the center speaker or surround speakers. • If you turn off the sound ef fects while the unit is repr oducing sound from a Dolby Digital or DTS signal, the dynamic range of the signal is automatically compressed and the unit will mix the sounds of the center [...]

30 DIGIT AL SOUND FIELD PROCESSING (DSP) Understanding sound fields A sound field is def ined as the “ characteristic sound reflections of a particular space. ” In concert halls and other music venues, we hear early reflections and rev erberations as well as the direct sound produced by the artist(s). The v ariations in the early reflections an[...]

BASIC OPERA TION 31 CINEMA DSP Sound design of CINEMA DSP Filmmakers intend for the dialog to be located right on the screen, the ef fect sound a little farther back, the music spread e ven farther back, and the surround sound around the listener . Of course, all of these sounds must be synchronized with the images on the screen. CINEMA DSP is an u[...]

32 ■ For movie pr ograms No. 7 8 9 Features This program creates the extremely wide sound f ield of a 70-mm movie theater . It precisely reproduces the source sound in detail, making both the video and the sound field incredibly real. This is ideal for any kind of video sour ce encoded with Dolby Surround, Dolby Digital or DTS (especially large-s[...]

BASIC OPERA TION 33 Sound field effects The 6-channel soundtracks found on 70-mm film produce precise sound f ield localization and rich, deep sound without using matrix processing. This unit ’ s MO VIE THEA TER programs provide the same quality of sound and sound localization that 6-channel soundtracks do. The b uilt-in Dolby Digital or DTS deco[...]

34 TUNING 4 Press PRESET/TUNING l / h once to begin automatic tuning. Press h to tune in to a higher frequency , or press l to tune in to a lower frequenc y . When the unit is tuned in to a station, the “TUNED” indicator lights up and the frequency of the station recei ved is shown on the front panel display . ■ Manual tuning If the signal fr[...]

BASIC OPERA TION 35 Presetting stations ■ A utomatically presetting FM stations Y ou can use the automatic preset tuning feature to store FM stations. This function enables the unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations in 5 groups, A1 through E8) of those stations in order . Y ou can then [...]

36 4 Press PRESET/TUNING l / h to select a preset station number (1 to 8) while the “ MEMOR Y ” indicator is flashing. Press h to select a higher preset station number . Press l to select a lower pr eset station number . 5 Press MEMOR Y (MAN ’ L/A UT O FM) on the front panel while the “ MEMORY ” indicator is flashing. The station band and[...]

B ASIC OPERA TION 37 ■ Exchanging preset stations Y ou can exchange the assignment of two preset stations with each other . The example belo w describes the procedure for exchanging preset station “E1” with “ A5”. 1 Select preset station “E1” using A/B/C/D/E and PRESET/TUNING l / h . See “Selecting preset stations” at left. 2 Pres[...]

38 Use this feature to automatically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer can only be set with the remote control. y • By connecting a commercially av ailable timer to this unit, you can also set a w[...]

BASIC OPERA TION 39 Recording adjustments and other operations are performed on other recording components. Refer to the operation instructions for these components for details on their operation . 1 T urn on the power of this unit and all connected components. 2 Select the source component y ou want to record fr om. 3 Start playback (or select a b[...]

40 Adjusting the items on the set menu Use the remote control to make adjustments. y • Y ou can change set menu parameters while the unit is reproducing sound. • Y ou can use NEXT and SET MENU +/ – on the front panel to change these settings, if the unit is not set to TUNER mode. Press NEXT to select the category or f ield you wish to change,[...]

41 AD V ANCED OPERA TION 6 Press j / i once to enter the setup mode of the selected item. The last setting you adjusted appears on the front panel display . Depending on the menu item, press u / d to select a sub item. 7 Press j / i repeatedly to c hange the menu item setting. 8 To exit, press u / d repeatedly until the menu disappears or just pres[...]

42 ■ 1B FRONT (fr ont speaker mode) Choices: LRG (large), SML (small) LRG Select this if you hav e large front speak ers. The unit directs the entire range of the front left and right channel signals to the front left and right speakers. SML Select this if you hav e small front speakers. The unit directs the lo w-frequency signals (90Hz and belo [...]

43 AD V ANCED OPERA TION SOUND 3 LFE LEVEL Use to adjust the output lev el of the LFE (low-frequency effect) channel accor ding to the capacity of your subwoofer or headphones. The LFE channel carries low- frequency special ef fects which are only added to certain scenes. This setting is ef fective only when this unit decodes Dolby Digital or DTS s[...]

44 SOUND 5 CENTER GEQ (center graphic equalizer) Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right front speakers. Y ou can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies. Control range (dB): – 6 to +6 Initial setting: 0 dB for 5-band 1 Pres[...]

45 AD V ANCED OPERA TION OPTION 1 DISPLA Y SET ■ DIMMER Use this to adjust the brightness of the front panel display . Control range: – 4 to 0 OPTION 2 MEM. GUARD (memory guard) Use this feature to prev ent accidental changes to sound field program parameter v alues and other system settings. Choices: ON, OFF Select ON to protect: • Sound fie[...]

46 ADV ANCED SETUP MENU The ADV ANCED SETUP menu is displayed in the front panel display . y • During the advanced setup procedure, audio output is muted. • During the advanced setup procedure, only the ST ANDBY/ ON, STRAIGHT (EFFECT) and PR OGRAM l / h buttons on the front panel are av ailable for operation. 1 T urn off the power to this unit,[...]

47 AD V ANCED OPERA TION REMOTE CONTROL FEA TURES In addition to controlling this unit, the remote control can also operate other A/V components made by Y AMAHA and other manufacturers. T o control other components, you must set up remote control with the appropriate remote control codes. Control area ■ Contr olling this unit The shaded areas bel[...]

48 Setting remote control codes Y ou can control other components by setting the appropriate remote control codes. Codes can be set up for each input area. The follo wing table shows the def ault component (Library: component category) and the remote control code for each area. 1 Press and hold CODE SET . With CODE SET depressed, press an input sel[...]

49 AD V ANCED OPERA TION Controlling other components Once you set the appropriate remote control codes, you can use this remote to control your other components. Note that some buttons may not cor rectly operate the selected component. Use the input selector b uttons to select the component you w ant to operate. The remote control automatically sw[...]

50 Using the test tone Use the test tone to set speaker le vels so that the v olume from each speaker is identical when heard from your listening position. 1 Press AMP . 2 Press TEST . The unit will output a test tone. 3 Press u / d repeatedly to select a speaker to adjust. Each time you press d , the unit will cycle through the speakers in the fol[...]

51 ADDITIONAL INFORMA TION EDITING SOUND FIELD P ARAMETERS Changing parameter settings The initial sound field program settings will pro vide you with an excellent listening e xperience as they are. But you can create an original listening en vironment by altering some settings. Note •T he editable parameters vary depending on the sound field pro[...]

52 Sound field parameter descriptions Y ou can adjust the values of certain digital sound field parameters so the sound f ields are recreated accurately in your listening room. Not all of the follo wing parameters are found in ev ery program. ■ DSP LEVEL Function: This parameter adjusts the level of all the DSP ef fect sounds within a narro w ran[...]

53 ADDITIONAL INFORMA TION TROUBLESHOOTING Refer to the chart below when this unit does not function properly . If the problem you are experiencing is not listed belo w or if the instruction below does not help, set this unit to standby mode, disconnect the po wer cord, and contact the nearest authorized Y AMAHA dealer or service center . ■ Gener[...]

54 Prob lem No sound from the center speaker . No sound from the surround speaker s. No sound from the subwoofer . P oor bass reproduction. A “ humming ” sound can be heard. The v olume level cannot be increased, or the sound is distorted. The sound effect cannot be recorded. The sound field parameters and some other settings on the unit cannot[...]

55 ADDITIONAL INFORMA TION Problem There is noise interfer- ence from digital or radio frequency equipment, or this unit. The unit suddenly turns into standby mode. Cause This unit is too close to the digital or high- frequency equipment. The internal temperature has become too high and the overheat protection circuitry has been activ ated. Remedy [...]

56 ■ Remote control Prob lem The remote control does not work nor function properl y . Cause Wrong distance or angle. Direct sunlight or lighting (from an in verter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. The remote control code has not correctly set. Even if the remote control c[...]

57 ADDITIONAL INFORMA TION RESETTING THE F ACTORY PRESETS If you want to reset all of your unit's parameters for any reason, do the follo wing. This procedure completely resets ALL parameters, including the SET MENU, level, assign, and tuner presets. Be sure this unit is in standb y mode. 1 With the unit in standby mode, hold down STEREO (EFFE[...]

58 GLOSSAR Y ■ CINEMA DSP Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their ef fect is best felt in a theater having man y speakers and designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely , it’ s inevitable th[...]

59 ADDITIONAL INFORMA TION GLOSSAR Y ■ Sampling frequency and number of quantized bits When digitizing an analog audio signal, the number of times the signal is sampled per second is called the sampling frequency , while the degree of fineness when con verting the sound lev el into a numeric value is called the number of quantized bits. The range[...]

60 SPECIFICA TIONS FM SECTION • Tuning Range [U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz [Other models] .............................................. 87.50 to 108.00 MHz • 50 dB Quieting Sensitivity (IHF , 100% mod.) Mono ................................................................. 2.8 µ V (20.2 dBf) • Sig[...]

LIST OF REMO TE CONTROL CODES TV Admiral 292 293 Aiwa 294 276 283 284 Akai 295 296 Alba 296 AOC 297 Bell&Howell 292 Bestar 298 Blaupunkt 229 222 Blue sky 298 Brandt 223 Brocsonic 297 Bush 296 Clatronic 298 Craig 224 Croslex 225 Curtis Mathis 297 226 Daewoo 297 298 224 227 228 Daytron 239 Dual 298 Emerson 297 224 239 232 Ferguson 223 265 266 Fir[...]

Sharp 395 362 382 Siemens 393 Signature 2000 395 397 Sony 368 379 372 373 374 375 Sylvania 397 325 326 328 Symphonic 397 Tandberg 334 Tashiro 396 Tatung 392 394 Teac 392 394 397 Technics 325 328 Telefunken 376 377 Thorn 393 396 Toshiba 335 369 389 Universum 396 327 376 W.WHouse 396 Wards 395 396 336 362 Yamaha 399 392 393 394 D VD player Denon 623 [...]

OWNER’S MANUAL HTR-5830 U AV Receiv er Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANADA MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY Y AMAHA ELECTRONIQUE FRANCE S.A. RUE [...]