Yamaha YSP-3000 инструкция обслуживания

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGE THORPE AVE., BUEN A PARK, CALIF. 90 620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER A VE., SCARBOR OUGH, ONTAR IO M1S 3R1, C ANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 2 5462 RELLINGEN BEI HAMB URG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZA T BP70 CROISSY-BEAUBO URG 7[...]

CAUTION: READ THIS BEFORE OPERATING THIS UNIT. i En 1 T o assure t he finest performanc e, please r ead this manual carefull y . Keep it in a safe plac e for futur e refere nce. 2 Install thi s sound system in a well v entilated, cool, dry , clean place with at lea st 5 cm (2 in) of space ab ov e (or belo w) this un it – aw ay from dir ect sunlig[...]

PREP ARA TION INTRODUCTION BA S I C OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION SETUP English 1 En Overview ... ............ ......... ............. ............ ......... ....... 2 Featur es ...... ............ ............ .......... ............ .......... .... 3 Using th is manual .............. ............ .......... ............[...]

Overvi ew 2 En It is generally accepted that in order to fully enjoy the benef its of su rround sound at home, you must endure the agon y of wiring and installing a great number of spea kers in the hop e that your listening room will giv e you the same kind of surround sound experience as your local mo vie theater . Y amaha YSP-3000 Digital Sound P[...]

Features 3 En INTRODUCTION English Digital Sound Projector™ The Digital Sound Projector te chnology allows one slim unit to control and steer multiple channels of sound to generate multi-channel surr ound sound, thus eliminates the need for satell ite loudsp eakers and cabling normally associated with con venti onal surround sound systems. This u[...]

Features 4 En The “ ” logo and “IntelliB eam” are trademarks of Y AMAHA Corporation. The “ ” logo and “Cinema DSP” are registered trademarks of Y AMAHA Corporation. Manufactured under licen se from Dolby Laborator ies. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “Neo:6?[...]

Using this manual 5 En INTRODUCTION English • This manual describes how to connect and operate th is unit. F or details regarding the operation of external components, refer to the supplied owner’ s manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified. • y ind[...]

Supplied accessories 6 En Check that you hav e recei ved all of the follo wing parts. Supplied accessories STEREO MY SUR. MY BEAM PRESET/TUNE MEMORY SEARCH SLEEP INPUTMODE ENHANCER MENU RETURN DISPLA Y TV VOL VOLUME MUTE CH LEVEL TEST TV INPUT TV MUTE ENTER SUR. DECODE OFF CODE SET SPORTS 5BEAM ST+3BEAM 3BEAM MUSIC MOVIE VOL MODE AU TO SETUP CA T F[...]

Controls and functions 7 En INTRODUCTION English 1 A UX 3 input jack Connect your portable audio player (see page 26). 2 INTELLIBEAM MIC jac k Connect the supplied IntelliBeam microphone for A UTO SETUP (see page 36). 3 Remote control sensor Receiv es infrared signals from the remote control. 4 Fro nt panel displa y Shows in formation about the ope[...]

Controls and functions 8 En 1 HDMI indicator Lights up when the signal of the selected input source is input at the HDMI IN jack(s). 2 TUNER indicators FM: Light up when this unit is recei ving an FM broadcast. XM: MEMOR Y flashes during the XM preset operation (U.S.A. and Canada models only). 3 CINEMA DSP indicator Lights up when a sound field pro[...]

Controls and functions 9 En INTRODUCTION English The illustratio n belo w sho ws the rear pa nel of the U.S.A. and Canada models. 1 ANTENNA jack Connect the FM antenna (see page 29). 2 DOCK terminal (U .S.A., Canada, and A ustralia models onl y) Connect the Y amaha iPod uni versal dock (such as YDS- 10, sold separately) (see page 2 in the Reference[...]

Controls and functions 10 En This section describes the func tions of the remote co ntrol used to control t his unit. Some b uttons marked with an asterisk ( * ) share the common functions between the YSP and TV/A V operation modes ( S ). y Y ou can also control other components using the rem ote control once you set the appropriate remote control [...]

Controls and functions 11 En INTRODUCTION English F D VD play er/VCR control buttons Control your D VD player or VCR (see pages 98 and 99). G My Beam microphone Collects the t est tones from this unit when using th e My Beam auto-adjust function (see page 61). H TV PO WER T urns on the power of your TV or sets it to the standby mode (see page 97). [...]

Controls and functions 12 En This section describes the func tions of the remote co ntrol used to control FM, Radio Data System, or iPod when the TV/A V mode is selected with the operation mode se lector ( 7 ). Note that the Radio Data System controls are av ailable for Europe model onl y , and the iPod controls are av ailable for Australia model o[...]

Controls and functions 13 En INTRODUCTION English This section describes the func tions of the remote control used to control this unit. Some b uttons mark ed with an asterisk ( * ) share the common functions between the YSP and TV/A V opera tion modes ( S ). y Y ou can also control other components using the remote control once you set the appropr[...]

Controls and functions 14 En F D VD pla y er/VCR contr ol b uttons Control your D VD player or VCR (see pages 98 and 99). G My Beam microphone Collects the test tones from this unit when using the My Beam auto-adjust f unction (see page 61 ). H TV PO WER T urns on the po wer of your TV or sets it to the standby mode (see page 97). I AV P O W E R T [...]

Controls and functions 15 En INTRODUCTION English This section describes the func tions of the remote control used to control FM, XM Satel lite Radio, or iPod when the TV/A V mode is se lected with the operation m ode selector ( 7 ). 1 PRESET/TUNE FM: Switches between the pr eset search mode and the frequency search mode (see pag es 49 to 52). 2 Nu[...]

Installatio n 16 En This section describes a suitable installation locat ion to install this unit using a metal w all bracket, a rack or a stand . Depending on your installation en vironment, connections with extern al components can be done before installing this unit. W e recommend that you temporarily pl ace and arrange all components, including[...]

17 En Installatio n PREP ARA TION English ■ Installati on exa mples Example 1 Install this unit as cl ose to the e xact center of the w all as possible. Example 2 Install this unit so that the so und beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position as possible.[...]

18 En Installatio n ■ Using a metal wa ll bracket Y ou can use the optional metal wall bracket to mount this unit on the wall in your listening room. y Refer to the instructions supp lied with the metal bracket for details on how to attach the meta l bracket to the wall or ho w to attach this unit to the metal bracket. ■ Using a stand Y ou can [...]

Connections 19 En PREP ARA TION English This unit is equipped with the following types of audio/video input/out put jacks/terminal: For audio input • 2 optical digital input jacks • 2 coaxial digi tal input jacks • 2 sets of analog input jacks • 1 uni versal dock terminal (U.S.A., Canada, and Australia models only) For audio/vi deo input ?[...]

20 En Connec tion s ■ Cables used f or conn ections HDMI cable A udio pin cable (suppl ied) Optical cable (sup plied) Digital audio p in cable (supplied) 3.5 mm stereo mini plug cable Subwoofer pin cable OSD video pin cable (supplied) ■ Notes on connect ing the optical cab le • Pull out the cap before c onnecting the optical cable. When you a[...]

21 En Connections PREP ARA TION English This unit is equipped with 2 HDMI input jacks and 1 HDMI ou tput jack. If your TV and other components ha v e HDMI jacks, use HDMI cables for simpler and easier conne ctions, and you can skip the connection procedures from page 22 to 25. If your TV has a built-in digital satellite tuner and an optical digital[...]

22 En Connec tion s For audio connection, connect the anal og audio output jacks on your TV to th e TV/STB A UDIO INPUT jacks on this unit. If your TV has an optical digital output jack, connect the optical digi tal output jack on y our TV to the TV/STB OPTICAL DIGIT AL INPUT jack on this unit. For video connection, c onnect the video input jack on[...]

23 En Connections PREP ARA TION English Connect the coaxial dig ital output jack on your D VD play er/recorder to the D VD COAXIAL DIGIT AL INPUT jack on this unit. When you connect this unit to your D VD/VCR com bo player/recorder , connect th e analog audio output jacks on your D VD/VCR combo player/recorder to the A UX 1 A UDIO IN PUT jacks on t[...]

24 En Connec tion s Connect the optical digital output jack on your digital satellite tuner or ca ble TV tuner to the TV/STB OPTICAL DIGIT AL INPUT jack on this unit. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the T V/STB A UDIO INPUT jacks on this unit. y T o prev ent the optical cable from being unp[...]

25 En Connections PREP ARA TION English Connect the TV/STB A UDIO INPUT jacks on this unit to the analog audio output jacks on y our TV . Connect the optical digital output jack on your digital airwav e tuner to the TV/STB OPTICAL DIGIT A L INPUT jack on this unit in addition to the analog audio connection. By doing so, y ou can enjo y both analog [...]

26 En Connec tion s Connect the analog audio output jack on your portable audio player to the A UX 3 input jack on the fr ont panel of this unit. 3.5 mm stereo mini plug cable Connecting a portable audio player A UX 3 P ortable audio player Front panel of this unit Analog audio output Aud i o[...]

27 En Connections PREP ARA TION English If your component supports optical digi tal connections, connect th e optical digital output jack on your component (e.g., D VD player/recorder) to the A UX 1 OPTICAL DIGIT A L INPUT jack on this unit. If your component does not support optical digital co nnections, connect the coaxial di gital output jack on[...]

28 En Connec tion s Connect the monaural input jack on your subwoof er to the SUBW OOFER OUT jack on this unit. This connection alone does not output sound from the connected subwoofer . T o output sound from the connected subwoofer , turn on the power of your subw oofer and then run A UTO SETUP (see page 35) or select SWFR for B ASS OUT in SUBWOOF[...]

29 En Connections PREP ARA TION English Connect the supplied FM antenna to the FM ANTENNA jack on this unit. The IR IN terminal does not support nor mal e xternal component conne ction. This is a contro l expansion terminal for commercial use only . Once all other connecti ons are complete, plug the AC po wer supply cable into the A C wall outlet. [...]

GETTING STARTE D 30 En 1 Press and hold the mark on the battery cove r and th en open the co ver . 2 Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Make sure you insert the batteries according to the polarity markings (+/–). 3 Close the battery cover . • Change all of the batteries if you notice the following con[...]

Getting started 31 En SETUP English 1 Press ST ANDBY/ON to turn on the power of this unit. The volum e le vel ap pears in the front panel display , and the current input s ource and beam mode are displayed. 2 Press ST ANDBY/ON again to set this unit to the standby mode. When this unit is in the st andby mode, only ST ANDBY/ON on the front panel or [...]

USING SET MENU 32 En This section describes how to display the OSD (on-screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is comple te, you can enjoy real surround sound while wa tching TV in the comfort of your o wn home. 1 Check that the video inpu t jack on y our TV is connected to the VID[...]

Using SET MENU 33 En SETUP English The follow ing diagram illustrates the overall flo w of the setup procedure. The flow chart of SET MENU Run A UTO SETUP (IntelliBeam). See “ A UTO SETUP (IntelliBeam)” on page 35. Look for a remedy . See “Error messages for A UT O SETUP” on page 41 for a complete list of error messages and possible remedie[...]

CHANGING OSD LANGUAGE 34 En This feature allows you to select the language of your choice that ap pears in SET MENU of this unit. 1 Set the operation mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV . y • The control buttons used for SET MENU are displayed at the bottom of the screen. • T o return to the previous scree[...]

AUTO SETUP (INTELLIBEAM) 35 En SETUP English This unit creates a sound f ield by reflecting sound beams on the w alls of your listening room and b y broadening the cohesion of all the channels. Just as you would ar range the speaker p osition of ot her audio systems, you need to set the beam angle to enjoy the best possib le sound from this unit. T[...]

AUTO SETUP (IntelliBe am) 36 En The supplied IntelliBeam microphone collec ts and analyzes the sound that this unit produces in your actual listening en vironment. Follo w the procedure belo w to connect the IntelliBeam microphone to this unit and make sure that the IntelliBeam microphone is placed in a proper location and that there ar e no lar ge[...]

AUTO SETUP (I ntelliBeam) 37 En SETUP English ■ Assembling the supplied car dboard micro phone stand Y ou will find three separate pa rts (one circular part and two longitudinal parts) of the cardboard microphone stand originally put together . 1 Disassemble the three pa r ts of the cardboard microphone stand originally put together . 2 Insert on[...]

AUTO SETUP (IntelliBe am) 38 En • Make sure that your listening room is as quiet as possible while this unit is performing the A UTO SETUP procedure. • T o achieve the best results possible, e vacuate yourself from your listening room until the A UTO SETUP procedure is completed so that you may not obstruct the path of soun d beams. • Be advi[...]

AUTO SETUP (I ntelliBeam) 39 En SETUP English 5 Press / to select BEAM+SOUND OPTIMZ, BEAM OPTIMZ onl y, or SOUND OPTIMZ only and then press ENTER. The follo wing screen appears on your TV . BEAM+SOUND OPTIMZ (Beam optimization an d sound optimizati on) Use to optimiz e the beam a ngle, delay , volume, and quality so that the paramete rs best match [...]

AUTO SETUP (IntelliBe am) 40 En 8 Check that the f ollowing screen is displa yed on y our TV . The results of the A UTO SETUP pro cedure are displayed on your TV . y • If “ENVIRONMENT CHECK [F AILED]” is displayed, we recommend runnin g the A U TO SETUP procedure again. For details, see step 9. • If “SUBWOOFER : NOT APPLICABLE” is displ[...]

AUTO SETUP (I ntelliBeam) 41 En SETUP English ■ Error messa ges for A UT O SETUP Before the A UT O SETUP procedure starts While the A UT O SETUP pr ocedure is in progress If one of the errors listed belo w exce pt E-1 is displayed, press RETURN. In case you have started the A UTO SETUP procedure by pressing A UTO SETUP in step 3, run the proce du[...]

USING THE SYSTEM MEMORY 42 En Y ou can save the current settings adjust ed in SET MENU in the syste m memory of th is unit. It i s handy to sa v e certain settings accord ing to the va rying conditions of your listening en vir onment. For example, if there are curtains in the path of sound beams, the effecti veness of the sound beams will vary depe[...]

Using the system memory 43 En SETUP English 5 Press / to select MEMOR Y1, MEMOR Y2, or MEMOR Y3 and press ENTER. The follo wing screen appears on your TV . 6 Press ENTER again. The ne w parameters are sav ed as MEMOR Y 1, MEMOR Y2, or MEMOR Y3. Once the parame ters are sav ed, the display re turns to the SET MENU screen. 7 Press MENU to exit. The S[...]

Using the system memory 44 En 4 Press / to select LO AD and press ENTER. The following screen ap pears on your TV . 5 Press / to select MEMOR Y1, MEMOR Y2, or MEMOR Y3 and press ENTER. The following screen ap pears on your TV . 6 Press ENTER again. The new parameters sa ve d as MEMOR Y1, MEMOR Y2, or MEMOR Y3 are loaded. Once the parameters are loa[...]

PLAYBACK 45 En BA S I C OPERA TION English Y ou can play back sound fro m the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one of the input selector buttons (TV, STB, D VD, A UX1, A UX2, or A UX 3) on the remote control. The name of the selected input source and the type of corresponding input[...]

46 En Playback Press A UX1 (or A UX2) to play bac k a component connected to the A UX 1 (or A UX 2) jack on the rear panel of this un it. Press A UX3 to pla y bac k a component connected to the A UX 3 input jack on the fr ont panel. Once an input source is selected (see page 45), you can play back the selected inp ut source. This section uses a D V[...]

47 En Playback BA S I C OPERA TION English Press V OLUME +/– to increase or decrease the v olume le vel. The numeric v alue of the volume le vel appears in the f ront panel display . Control range: MIN (minimum), 01 to 99, MAX (maximum) • The volume le vel of all input sources (including multi-channel as well as stereo sources) cha nges at the [...]

FM TUNING 48 En There are two tuning methods: automatic an d manual. Automatic tuning is ef fecti v e when the ra dio signal is strong and there is no interference. I f the radio signal is weak, tune into the FM station manually . Y ou can als o use the auto matic and manual preset tuning featur es to store up to 40 stations in total (A1 to E8: 5 p[...]

49 En FM tuning BA S I C OPERA TION English Automatic tuning is ef fect i ve when the radio station signals are strong and there is no interference. 1 Set the operation mode selector to TV/A V. 2 Press FM to select FM as the input source. “FM” appears in the front panel display . y • Y ou can also press INP UT on the front panel repeatedly to[...]

50 En FM tuning 3 Press SEARCH repeatedly until the A UT O indicator disappears fr om the fr ont panel displa y . If a colon (:) appears in the front panel display , tuning is not a v ailable. Press PRESET/TUNE t o turn the colon (:) off . 4 Press ENTR Y ( / ) to tune into the desired station manually . y Hold down the b utto n for quick search. Y [...]

51 En FM tuning BA S I C OPERA TION English Y ou can also store up to 40 station s (A1 to E8: 5 preset station groups with 8 pres et station numbers each) manually . 1 Set the operation mode selector to TV/A V. 2 T une into the desired FM station. See page 49 for tuning instructions. 3 Press MEMOR Y. The MEMOR Y indicator flas hes in the front pane[...]

52 En FM tuning Y ou can tune into the preset stations sim ply by select ing the preset station groups and n umbers. 1 Set the operation mode selector to TV/A V. 2 Press FM to select FM as the input source. “FM” appears in the front panel display . y • Y ou can also press INPUT on th e fr ont panel repeatedly to select FM as the input source.[...]

53 En FM tuning BA S I C OPERA TION English 1 T une into the desi red Radio Data System broad casting station. W e recomm end automati c preset tuning to tune into the Radio Data System br oadcasting stations (see page 50). The A UTO PS feature of this unit changes the frequency display to the “PS” mode if the Radio Data System station broadcas[...]

ENJOYING SURROUND SOUND 54 En Y ou can enjoy multi-channel surro und sound by changing the be am mode using the beam m ode b uttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Su rround for multi-channel playback. • When ANGLE TO W ALL OR CORNE R is set in MANU AL SETU P (see page 74), 5 Beam and 3 Beam cannot be selec[...]

55 En Enjoying surround so und BA S I C OPERA TION English Outputs normal sound from the front left and right channels and sound beams from the center and surround left and right channels. Th is mode is ideal for w atching liv e recordings on a D VD. V o cals and instrumental sounds can be heard close to the cent er of the listening position while [...]

56 En Enjoying surround sound ■ Decoder indicat or s Depending on the input source and the selected surround mode, the decoder indicators in the front panel display light up as follows: y • Y ou can select an input mode (A UTO, DTS, or AN ALOG) by pressing INPUTMODE repeated ly (see page 87). • Discs encoded in DTS-ES, Dolb y Digital 5.1 EX, [...]

57 En Enjoying surround so und BA S I C OPERA TION English This unit can decode 2-cha nnel sources for 5.1-channel playback so that you can enjoy a v ariety of surround sound effects b y switching the surround mode. y The surround modes are av ailable only when the CINEMA DSP programs are turned off (see pa ge 65) or when the mo vie program is sele[...]

58 En Enjoying surround sound Y ou can enjoy analo g audio signals output from your TV in real surround sound. y Before perform ing the steps below , set the volume of this unit to 30. If necessary , adjust the volume lev el in step 4 belo w . 1 Select the TV channel you want to watch. T o select a TV channel, use the remote control supplied with y[...]

59 En Enjoying surround so und BA S I C OPERA TION English Y ou can configure the parame ters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. 1 Repeat st eps 1 and 2 in “Enjo ying 2-channe l sources in surr ound sound ” on pa ge 57 and select PL II Musi c or Neo:6 Music. 2 Press / to select the parameter[...]

ENJOYING STEREO SO UND 60 En Y ou can enjoy 2-channel and 5-channel stereo playback as the beam modes b y pressing STEREO on the remote control. • When you play back Dolby Dig ital audio signals in the 2-chan nel or 5-channel stereo playb ack, the dynamic range becomes compressed. If the volume lev el decreases to th e extreme, use other beam mod[...]

PLAYING BACK SOUND CLEARLY (MY BEAM) 61 En BA S I C OPERA TION English Y ou can improve listenability in a noisy en vironment by changing the beam mode to My Beam, which o utputs sound beams directly tow ard the liste ning position in a single channel. In addition, My Beam is al so ideal when you do not want the sound beams to be reflected on the w[...]

62 En Playing back sound clearly (My Beam) Y ou can adjust the beam a ngle manually while playing back an input source. Thi s function is also ideal if the listening position is out of th e operation guarantee range of the auto-adjust function. 1 Set the operation mode selector to YSP. 2 Press MY BEAM. “MY BEAM” is displaye d in the front p ane[...]

USING SOUND FIELD PROGRAMS 63 En BA S I C OPERA TION English This unit is equipped with a variety of precise digital de coders that allo w you to enjoy multi-channel playback from stereo or multi-channel sources. This unit is also equipped with a Y amaha CINE MA DSP (digital sound f ield processing) chip containing se veral sound f ield programs us[...]

64 En Using sound field prog rams Y ou can select from three dif ferent CINEMA DSP programs (MUSIC, MO VIE, and SPOR TS) depending on the type of source you want to enjoy . The CINEMA DSP indicator lights up in the front panel display when one of the CINEMA DSP programs is selected. • The CINEMA DSP program s are ineffecti ve when My Surround (se[...]

65 En Using sound field pro grams BA S I C OPERA TION English ■ T urning off CINEMA DSP programs T urn off the CINEMA DSP programs if you w ant to enjoy the original sound without the CINEMA DSP program effect. 1 Set the operat ion mode selector to YSP. 2 Press OFF to turn off the CINEMA DSP prog rams. “CINEMA DSP OFF” is disp layed in the fr[...]

USING THE MUSIC ENHANCER 66 En Y ou can use the Music Enhancer of this unit to impro ve the sound nearest to the original depth and width of compression artifac ts such as the MP3 format. 1 Set the operation mode selector to YSP. 2 Press ENHANCER to select the Music Enhancer . The currently selected mode appears in the front panel display . 3 Press[...]

USING THE VOLUME MODE (NIGHT LISTEN ING ENHANCER/TV VOLUME EQUAL MODE) 67 En BA S I C OPERA TION English The night listening enhancers are designed to impro ve listenabi lity at lo wer volumes or at ni ght. In addition, you can limit the v olume le vel of the TV so that it will not v ary sudden ly to a great extent whene ver the contents being broa[...]

USING TH E SLEEP TI MER 68 En Use this feature to automatic ally set this unit to the stand by mode afte r a specifie d period of time. The sleep timer is useful if you are going to sleep after a certain amount of time while th is unit is still playing back a source. 1 Set the operation mode selector to YSP. 2 Press SLEEP repeatedly to set the inte[...]

69 En Using the sleep timer BA S I C OPERA TION English ■ Canceling the sl eep timer 1 Set the operat ion mode selector to YSP. 2 Press SLEEP repeatedly until “SLEEP OFF” appears in the fr ont panel display . 3 W ait f or a fe w seconds without op erating this unit to confirm the setti ng for the sleep timer . The SLEEP indicator disapp ears [...]

DISPLAYING THE INPU T SOURCE INFORMATION 70 En Y ou can display the format and samp ling frequenc y of the current input signal in the front panel display . 1 Set the operation mode selector to YSP. 2 Press DISPLA Y. The information on the current input signal is displayed as follows: y When the input signal is unclea r , “___” is displayed fo [...]

USING THE HDMI CONTROL FEATURE 71 En BA S I C OPERA TION English Y ou can operate the following functions using the remote control supplied wi th your TV if this unit and an HDMI control-compatible TV (e xcept so me models) are connected via HDMI. • T urning on or off the po wer (syn chron ized operation with the TV) • Selecting the audio outpu[...]

MANUAL SETUP 72 En T o achie ve the best quality surround sound, you can use M ANU AL SETUP to fine-tune the listening en vironment parameters, as well as to ma k e advanced settings for sound signals, sound be ams, digital i nput, and the OSD. Change the initial settings (indica ted in bold under each paramete r) to reflect the needs of your ow n [...]

73 En MANUAL SETUP AD V ANCED OPERA TION English Use the remote control to acce ss and adjust each parameter . y Y ou can adjust the SE T MENU parameters while the unit is reproducing sound . 1 Set the operat ion mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV . y • The control buttons used for SE T MENU are displayed a[...]

74 En MANUAL SETUP Use to manually ad just the va rious parameters related to the sound beam ou tput. SET MENU → MANU AL SETUP → BEAM MENU y Y ou can adjust the sound beam ou tput lev el of each channel in “ Adjusting the audio balance” (see page 84). ■ SETTING P ARAM ETERS (Setting parame ters ) Use to set the position of this unit in yo[...]

75 En MANUAL SETUP AD V ANCED OPERA TION English • Select ANGL E T O W ALL OR CORNER if this unit is installed in the corner of y our listening room. Adjust the width and length of you r listening room as well as the distance of the listening posit ion from this unit. Choices for the room width and length: 2.0 m to 12.0 m (6.5 ft to 40.0 ft) Choi[...]

76 En MANUAL SETUP BEAM TRA VEL LENGTH (Beam travel length) A certain amount of delay mu st be applied to the sound from each channel so that al l sounds can arri ve at the listening position at the same time . This menu sets the distance that sound beams tr avel after being output and reflected of f the wa ll until they arri ve at the listening po[...]

77 En MANUAL SETUP AD V ANCED OPERA TION English TREBLE GAIN (T reble gain) Use to adjust the high-frequency output le ve l of each channel. y If the reflection points of the front left and right or surround left and right sound beams are on curtain or other acoustically absorbent surfaces, you can achie ve more ef fectiv e surround sound by increa[...]

78 En MANUAL SETUP Use to manually ad just the va rious parameters related to the sound output. SET MENU → MANU AL SETUP → SOUND MENU ■ T ONE CONTR OL (T one control) Y ou can adjust the tonal quality of sound beams. TREBLE (T reble) Use to adjust the high-frequency response. Choices: –12 dB to +1 2 dB Initial setting: 0 dB B ASS (Bass) Use[...]

79 En MANUAL SETUP AD V ANCED OPERA TION English ■ A UDIO DELA Y (Audio dela y) Use to delay the sound output and synchronize it with the video image. This may be ne cessary when using certain LCD monitors or projectors. Choices: 0 to 160 msec ■ ROOM EQ (Room equalize r) Use to change the tonal qualiti es of your listening room when the unit is[...]

80 En MANUAL SETUP Use to manually ad just the va rious parameters related to the audio and video input. SET MENU → MANU AL SETUP → INPUT MENU “F) XM ANTENNA LEVEL” is for U.S.A. and Canada models only . ■ INPUT ASSIGNMENT (Input assignment) Use to assign the HDMI IN jacks of this unit to other components if the initial settings of this u[...]

81 En MANUAL SETUP AD V ANCED OPERA TION English • Select A UX1 AN ALOG to adjust the le vel of audio and video signals input at the A UX 1 A UDIO INPUT jacks of this unit. Control range: –6.0 dB to 0.0 dB Initial setting: –3 .0 dB • Select A UX1 DIGIT AL to adjust the lev el of audio and video signals input at the A UX 1 OPTICAL DIGIT AL I[...]

82 En MANUAL SETUP SUPPORT A UDIO (Support audio) Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit. Choices: YSP-3000 , O THER • This setting is effectiv e when HDMI CONTROL is set to OFF (see right) . • When HDMI CONTROL is set to ON, this setting is ine[...]

83 En MANUAL SETUP AD V ANCED OPERA TION English Use to manually adjust the v arious parame ters related to the display . SET MENU → MANUAL SETUP → DISPLA Y MENU ■ F .DISPLA Y SET (Front panel display settin gs) Use to adjust the brightness and display settings of the front panel display . ST ANDARD DIMMER (Standard dimmer) Use to adjust the [...]

Adjusting the audio balance 84 En Y ou can adjust the sound beam output level of each channel b y using the test tone or the a udio output being played back in each beam mode to achie ve a more true-to-life surround sound e xperience. Y ou can use the test tone feature to output a test tone from each channel to manually ba lance the channel lev els[...]

85 En Adjusting the audio balance AD V ANCED OPERA TION English 5 Press TEST when y ou have completed all your adjustments. • All channel levels cannot be ad justed when the 2-channel or 5- channel stereo playback (see page 60), My Beam (see pag e 61), or My Surround (see page 55 ) is selected as the beam mode. • “FR ONT L/R” cannot be adju[...]

86 En Adjusting the audio balance 3 Press / to adjust the channel v olume. Control range: –10.0 dB to +10.0 dB 4 W ait f or a few seconds without operating this unit when yo u have complet ed your adjustment . • All channel levels cannot be adju sted when the 2-channel or 5- channel stereo playback (s ee page 60), or My Surroun d (see page 55) [...]

Selecting the input mode 87 En AD V ANCED OPERA TION English Y ou can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is a v ailable for TV/STB, D VD, A UX1, and A UX2. y W e recommend setting the input mo de to A U TO in most cases. 1 Set the oper[...]

Adjusting the system pa rameters 88 En This unit has additional menus th at are displayed in the front panel disp lay . These menus of fer additional operations to adjust and customize the way this unit operate s. When “F .P ANEL KEY” is set to “F .P ANE L: OFF” (see page 93), ST A NDBY/ON on the front panel is ineffecti ve. Use ST AN DBY/O[...]

89 En Adjusting the system parameter s AD V ANCED OPERA TION English Y ou can protect the settings you saved in the system memory of this unit from bei ng accidentally erased or unwantedly changed. 1 Repeat steps 1 to 3 in “Using the system parameters” on page 88. 2 Set the operat ion mode selector to YSP. 3 Confirm that “MEM OR Y PR O TECT?[...]

90 En Adjusting the system pa rameters Y ou can set the m aximum v olume le vel so that this uni t will not output sound beyond th e limited v olume le vel. 1 Repeat steps 1 to 3 in “Using the system parameters” on page 88. 2 Set the operation mode selector to YSP. “ 3 Press / so that “MAX VOLUME SET” is displa yed in the fro nt panel dis[...]

91 En Adjusting the system parameter s AD V ANCED OPERA TION English 3 Press / so that “TURN ON V OLUME” is displa yed in the fr ont panel displa y . 4 Press ENTER. 5 Press / to adjust the initial v olume le vel. Control range: MAX, 9 9 to 01, OFF Control step: 1 6 Press ST ANDBY/ON on the remote control to set this unit to the standby mode. Th[...]

92 En Adjusting the system pa rameters 4 Press / to switch between “DEMO: ON” and “DEMO: OFF”. • Select DEM O: ON to activ ate the demo mode . • Select DEMO: OFF to deacti v ate the demo mo de. 5 Press ST ANDBY/ON on the remote control to set this unit to the standb y mode. The new setting will be acti v ated when you turn on the power [...]

93 En Adjusting the system parameter s AD V ANCED OPERA TION English 4 Press / to switc h between “P .INPUT: ON” and “P .INPUT : OFF”. • Select P . INPUT : ON to enable the INPUT key on the front panel. • Select P .INPUT : OFF to disable the INPUT ke y on the front panel. “F .P ANEL KEY” is automati cally set to “ON”. 5 Press ST[...]

94 En Adjusting the system pa rameters 4 Press / to switc h between “F .P ANEL: ON” and “F .P ANEL: OFF”. • Select F .P ANEL: ON to enable the front panel keys. • Select F .P ANEL: O FF to disable th e front panel keys. “P .INPUT” is automati cally set to “ON”. 5 Press ST ANDBY/ON on the remote control to set this unit to the st[...]

95 En Adjusting the system parameter s AD V ANCED OPERA TION English 5 Press / to switch between “PRESET : RESET” and “PRESET : CANC EL”. • Select PRESET : RESET to reset all of the current settings. • Select PRES ET : CANCEL to cancel the resetting procedure. 6 Press ST ANDBY/ON on the remote control to set this unit to the standby mod[...]

Remote control features 96 En In addition to controlling this unit, th e remote control can also operate other A V components made b y Y amaha and other manufacturers. T o control othe r components, you must set up the remote cont rol with the appropriate remote control codes and set the operation mode selector to TV/A V to change the control area.[...]

97 En Remote control features AD V ANCED OPERA TION English ■ Operating y our TV Set the operation mode se lector to TV/A V, and press TV to select TV as the input source. The control area of the remote control changes to the TV operation mode. 1 Numeric buttons Selects a TV channel for playback. 2 CH +/– Switches between the a v ailable TV cha[...]

98 En Remote control features ■ Operating y our D VD play er/recor der Set the operation mo de selector to TV/A V and press DVD to select D VD as the inp ut source. The control area o f the remote control c hanges to the D VD operation mode. 1 Numeric buttons Enter numeric digits. 2 Cursor b utton s / / / , ENTER Use to select D VD menu items. 3 [...]

99 En Remote control features AD V ANCED OPERA TION English ■ Operating y our VCR Set the operation mode se lector to TV/A V and press A UX1 to select VCR as the input sour ce. The control area of the remote control changes to the A UX1 operation mode. y This operation is available when your VCR is connected to the A UX 1 AUDIO INPUT jacks on thi[...]

100 En Remote control features The TV macro feature makes it possible to perform a series of operations with th e press of a single b utton. For example, when you want to play a D VD, you would normally turn on the component, select D VD as the input source, and press the play b utton to start playback. The TV macro feature lets you perfo rm all of[...]

101 En Remote control features AD V ANCED OPERA TION English ■ Setting macr os f or the TV without the tuning capabi lity 1 Press and hold CODE SET and press one of the input selector buttons to select the input source y ou want to set macr os fo r . Proceed to step 2 while holding down CODE SET. 2 Press MA CR O while hol ding do wn CODE SET. 3 P[...]

Troubleshooting 102 En Refer to the chart belo w when this unit does not function p roperl y . If the problem you are e xperiencing is not listed belo w or if the instruc tion belo w does not help, set this unit to th e standb y mode, disconnect the A C po wer supply cable, and contact the nearest authorized Y a maha dealer or service center . ■ [...]

103 En Troubleshooting ADDITIONAL INFORMA TION English Prob lem Cause Remedy See page No sound from the subw oof er . B ASS OUT in SUBWOOFER SET is set to FR ONT. Select SW FR. 78 The source does not c ontain low bass signals. Distorted or too little bass sound. CR OSS O VER in SUBWOOFER SET is set incorrec tly . Set CROSS O V ER correctly . 78 One[...]

104 En Troubleshooting ■ Remote contr ol ■ HDMI ■ FM tuner Problem Cause Remedy See page The remote control does not work and/or function properly . Wrong dis tance or an gle. The remote control fu nctions wi thin a maximum rang e of 6 m (2 0 ft) and no more than 45 de grees of f-axis from the fro nt panel. 30 Direct sunlight o r lighting (fr[...]

Glossary 105 En ADDITIONAL INFORMA TION English ■ Dolby Digital Dolby Digital is a digital surround sound system that gi ves you completely independent mu lti-channel audio. W ith 3 front channels (left, center , and right) and 2 surround stereo channels, Dolb y Digita l pro vides 5 full-rang e audio channels. W ith an additional channel especial[...]

106 En Glossary ■ LFE 0.1-chann el This channel is for the reproduction of lo w bass signals. The frequenc y range for this channel is 20 Hz to 120 Hz. This channel is counted as 0. 1 because it only enforces a low-frequenc y range compared to the full-range reproduction by the other 5/6 ch ann els in Dolby Digital or DTS 5.1/6.1-ch annel systems[...]

Index 107 En ADDITIONAL INFORMA TION English ■ Numerics 3 Beam ............ ........... ........... ........... ............ ........... ........ 55 5 Beam ............ ........... ........... ........... ............ ........... ........ 54 ■ A A C po wer supply cable ... ........... ........... ........... ........... .... 29 Audio pin cable [...]

Specifications 108 En AMP SECTION • Maximum Output Po wer (JEIT A) ...................... ................... ........ 2 W (1 kHz, 10% THD, 4 Ω ) × 21 20 W (100 Hz, 10% THD, 4 Ω ) × 2 SPEAKER SECTION •D r i v e r Small dia. spea kers ...................... 4 cm (1-9/16 in) cone magnetic shielding type × 21 W oofers .................. .. [...]

109 En Limited Guarantee f or Eur opean Economic Area (EEA) an d Switzerland Thank you for having chosen a Y amaha produc t. In the unlikely event that your Y amaha product needs guarant ee service, pleas e co ntact the dealer from whom it was purchased. If you experience any diff iculty , p lease co ntact Y amaha represent ativ e off ice in your c[...]