Zanussi ZDS 2010 инструкция обслуживания

EN User manual 2 Dishwasher ZDS 2010[...]

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Use of rinse aid _ _ _[...]

• Do not change the specifications or modify this prod- uct. Risk of injury and dam age to the applia nce. • Do not use the appliance: – if the main s cable or water hoses are damag ed, – if the control pane l, workto p or plinth area are dam- aged, that you can get acces s to the inn er side of the applia nce. Contact yo ur local Se rvice [...]

Programme knob and on/off indicator light • To set a wa shing programme, turn the programme knob clockwise or anticloc kwise. The programme marker on the prog ramme knob must agree with one of the washing programmes on the control panel. – The on/off indicator light co mes on (position ON). • To set the appliance to the off position, turn the[...]

Programme Duration (in minutes) Energy (in kW h) Water (in litres) Quick 65° A 30' 30 0,8 8 Economy 50° 120 - 130 0,8 - 0,9 12 - 13 Prewash 11 0,1 5 The pressure and temperat ure of t he water, t he var- iations of power supply and t he quantity of dishes can change th ese values. Use of the appliance Refer to the follow ing instru ctions f [...]

Water hardnes s Water hardnes s setting °dH °TH mmol/l Clarke manually electronica lly 51 - 70 91 - 125 9,1 - 12,5 64 - 88 2 10 43 - 50 76 - 90 7,6 - 9,0 53 - 63 2 9 37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 8 29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 7 23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 6 19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 5 15 - 18 26 - 32 2,6 - 3,2 18 -[...]

1 2 3 Fill the salt container with 1 litre of water (only the first operation). 4 5 6 It is normal that water overflows from the salt con- tainer when you fill it with salt. Make sure that there is no grain of salt outer of the salt compartment. Salt whic h s tays on the tank for a while drills the tank. It is recomm ended to start a wash - ing pro[...]

Caution! Do not fill the rins e aid dispenser with other products (e.g. dish w asher cleani ng agent, liquid detergent). There is a risk of damage to t he appliance. Adjusting the dosage of rinse aid The rinse aid dial i s set at the factory at position 4. To increa se or decr ease the dosage refer to 'What to do if...' Loading cutlery an[...]

1 Arrange the items to let water touch all surfac es. 2 For longer items, fold the cup racks up. Adjustment of the height of the upper basket If you put large plates in th e lower basket , first move the upper basket to a upper position. Warning! Adjust the height before you load the upper basket. Maximum heigh t of the dishes in : upper bask et lo[...]

5 6 Different brands of detergent dissolve in different times. Some detergent tablets do not ha ve the best cleaning results during sh ort washing programmes. Use long washing pr ogrammes when you use deter gent tab- lets to fully remove the detergent. Use of combi detergent tablets These tabl ets contai n agents such as deterge nt, rinse aid and d[...]

Do not open the door during the c ountdown to pre- vent interruption of th e countdown. When you close the door again, the co untdown continues from the point of interruption. Cancelling a delay start: 1. Press and hold the start/cancel button until, the start/ cancel indicator light and de lay start indica tor light go off. 2. Press the st art/can[...]

External cleaning Clean the ext ernal surfa ces of the app liance and con trol panel with a da mp soft cloth. Only us e neutral detergents. Do not use abrasive products, scouring pads or solvents (acetone, trichloroe thylene etc...). Frost precautions Caution! Do not instal l the appliance whe re the temperature is below 0 °C. Th e manufacturer is[...]

Fault code and malfunc tion Possib le cause and sol ution The programme does not start • The appliance door is not closed. Close the door. • Mains plug is not connecte d in. Put in the mains. • The fuse has blown out in the household fuse box. Replace th e fuse. • Delay start is set. Cancel the delay start to start the programme im mediatel[...]

Depth cm 60,5 Electrical connection - Voltage - Overall po wer - Fuse Information on the electrica l connection is given on the rating plate on the inner edge of the dishwashe r door. Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Capacity Place se ttings 9 Environment concerns The symbol on the product or on its packaging[...]

3 4 Install the appliance work top to the appliance if you want to use th e dishwasher as a freesta nding appl iance. The plinth on freestanding appliance is not adjusta ble. Adjusting the level of the appliance Make sure t hat the app liance is le vel to clo se and seal the door correctly. If the lev el of the appliance is corre ct, the door does [...]

Electrical connection Warning! The manufac turer is not responsible if you do not follow these s afety precautions. Ground the appliance ac cord ing to safety precau tions. Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply. Always use a c orrectly i nstalled shockpr[...]

17[...]

18[...]

19[...]

To buy accessories, consumables and spare parts at our onl ine shop please visit: www.zanussi.co.uk www.zanuss i.com 117952390 - 00 - 0620 09[...]