Zanussi ZWG 6120 K инструкция обслуживания

EN User manual Washing Machine ZWG 6100 K ZWG 6120 K[...]

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ 4 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ 6 Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Optio[...]

General Safety • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not change the specific ation of this appliance. • Obey the maximum load volume of 6 kg (refer to the “Programme chart” chapter). • If the supply cord is damaged, it must be repla ced by the manu- facturer, its service[...]

that there is access to the mains plug after the installation. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • Do not touch the mains cable or the mains plug with wet hands. • Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is necessary to change the fuse in the mains plug, use a [...]

household waste disposal service or the shop where you purchased the product. Packaging materials Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Ecological hints To help the environment, us e less water and energy, obey these in structions: • Set a programme without the prewash phase to wash laun[...]

Control panel 90° 3h 6h 9h 60° 40° 30° Tem p. Spin Washing Extra Rinse End Delay Start Super Quick Start / Pause 3 1 2 5 4 6 7 1 Programme knob 2 Delay start button (Delay Start) 3 Programme phase indicators: – Washing indicator – Extra Rinse indicator – End indicator 4 Start/pause button (Start / Pause) 5 Super quick button (Super Quick)[...]

Programme Temperature range Type of load and soil Maximum l oad, Maxim um spin Drain To drain the wate r in the drum. All fabric s. 6 kg Spin To spin the laun dry and to drain the wate r in the drum. All fabrics. 6 kg, 1000 rpm (ZWG 6100K), 1200 rpm (ZWG 6120K) Easy Iron 60 °C - Cold Synthetic fabric items. Normal soil. It prevents the laundry cre[...]

Programmes Load (kg) Energy con- sumption (kWh) Water con- sumption (li- tre) Approxi- mate pro- gramme duration (minutes) Remaining moisture (%) 1) ZWG 6100K Remaining moisture (%) 1) ZWG 6120K Standard cotton programm es Standard 60 °C cotton 6 0.98 50 185 60 53 Standard 60 °C cotton 3 0.76 36 173 60 53 Standard 40 °C cotton 3 0.59 37 169 60 5[...]

Temperature button (Temp.) Press this button to chang e the default temper- ature. Symbol — cold water . Spin button (Spin) With this button you can set one of these op- tions: Automatic spin reduction Set this function to decrease the spin seed to a half, but not less than 400 rpm. Rinse hold Set this function to prevent the laundry creases. The[...]

The detergent compartm ent for the washing phase. If you use a liquid detergent, put it im- mediately before yo u start the pro- gramme. Liquid additives compartmen t (fabric conditioner, starch). Put the product in the compartme nt be- fore you start the pro gramme. Flap for powder or liquid detergent. When you s et a programm e with a prew ash, p[...]

• Press the Start / Pause button : The appliance starts the countdown. When the countdown is comp leted, the pro- gramme starts automatically. You can change or cancel the delay start before you press the Start button. After pressing the Start button you can only cancel the delay. To cancel the de lay start: 1. Press the Start / Pause button to s[...]

– You can open the door. 4. Turn the programme knob to to deacti- vate the appliance. Stand by Some minutes after the end of the washing pro- gramme, if you do not deactivate the appliance, the energy saving status activates. The energy saving status decreases the energy consumption when the appliance is on the standby. • All indicators go off.[...]

Care and cleaning External cleaning Clean the appliance only with soap and warm water. Fully dry all the surfaces. Caution! Do not use alcohol, solvents or chemical products. Descaling The water we us e contains limescale. If it be- comes necessary, use a water softener to re- move limescales. Use a special product made for washing ma- chines. Obey[...]

1. 1 2 3 2. 3. 4. 45° 20° Frost precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Remove the water inlet hose 4. Remove the drain hose from the rear supp[...]

Problem Possible solution Make sure that th e appliance door is closed. Make sure that there is not a damaged fuse in the ho usehold fuse box. Make sure that the but ton Start/Pause has been pressed. If the delay st art is set, cancel the set ting or wait for the end of t he countdown. Make sure that th e programme knob is in the cor rect position.[...]

Problem Possible solution Make sure that the pack aging and/or the transit b olts are removed. Refer to ' Instal- lation ins truction'. Add more laundry in the drum. The load may be too small. The applia nce fills wit h water and drain immedi- ately. Make sure t hat the drain hose is in the co rrect position. The end of the hose may be is[...]

17 www.zanussi.com[...]

18 www.zanussi.com[...]

19 www.zanussi.com[...]

www.zanussi.com/shop 192984691-A-492012[...]