Zanussi ZWH 3101 инструкция обслуживания

EN User manual Washing Machine ZWH 3101[...]

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ 3 Technical information _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9[...]

• Only a qualified person must do the electrical installation, the plumbing and the installation of the appliance. This to prevent the risks of structural damage or inju ry. • Do not install or u se the appliance where the temperature is less than 0 °C. • When you install the ap pliance on a carpet floor, make sure that there is air circulat[...]

Technical information Dimensions Width / Height / Depth 595 / 850 / 330 mm Electrical conn ection: Voltage Overall power Fuse Frequency 220-240 V 2100 W 10 A 50 Hz Level of prot ection against ingress of solid particles and moist ure en- sured by the prot ective cover, except where the low voltage equipment has no protection agai nst moisture IPX4 [...]

Accessories 1 2 3 4 1 Inlet hose To connect the appliance to the cold water tap. 2 Large plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. 3 Plastic hose guide To connect the drain hose on the edge of a sink. 4 Small plastic caps To attach the protection cover to the bot- tom of the appliance. C[...]

Display 3 A B C D The display show s: A •T h e d e l a y s t a r t When you press the de lay start button, the display shows the delay start time. B • The default spin speed of the programme. •' N o S p i n ' ( 00 ). C • The display symbols. The symbols appear on the disp lay when the related function is set. D • The programme t[...]

Programmes Programme Temperature Type of load and soil Weight of load Programme phases Possible functions Хлопок 90° — 75° C White cotton with heavy soil. This programmes add also the phase of hygiene to the lau ndry. max. 7 kg Wash Rinses Spin phase at the maxi - mum speed Хлопок 1) 60° C White and fast coloured cotton with normal[...]

Programme Temperature Type of load and s oil Weight of load Programme phases Possible functions Синтетика Микс 30° C Cotton, synthetic or mixed fabric items with light level of soil or worn once. max. 3 kg Wash Rinses Spin phase at 800 rpm Деликатные ткани Рубашки 40° C Delicate fabric s as viscose, polyes ter i[...]

Consumption values Programme 1) Energy consumption (KWh) Water consumption (litre) White Cottons 90° C 2.37 65 Cottons 60° C 2) 1.10 76 Cotton economy 40° C 0.66 49 Cotton 30° C 0.45 60 Synthetics 40° C 0.50 49 Delicates 40° C 0.51 49 Wool/ Hand wash 40° C 0.31 62 The consum ption inform ation shown in this chart is indicat ive. It can vary [...]

• If your appliance has not the detergent dis- penser with the flap device, add the liquid detergents with a dosing ball. Water hardness If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener. To [...]

Caution! Make sure that no laundry stays be- tween the seal and the door. There is a risk of water leakage or damage to the laundry. Filling the detergent and additives Caution! Use only specified detergents for washing machine. 2 1 1 The detergent com partment for the pre- wash phase or for the soak programme. Add the detergent for prewash and soa[...]

2. Turn the programme knob again to activate the appliance. Now, you can set a new washing programme. The appliance does not dr ain the water. Change a function You can change only the delay and spin func- tion before they operate. Press the related button to set the new value. Set the delay start 1. Press the delay start button again and again unt[...]

Descaling The water we us e contains limescale. If it be- comes necessary, use a water softener to re- move limescales. Use a special product made for washing ma- chines. Obey the instructions that you find on the packaging of the manufacturer. Do this separately from the laundry wash. Maintenance wash With the low tempe rature programmes it is pos[...]

1. Open the pump door. 2. Put a container below the recess of the drain pump to collect the water that flows out. 3. Unscrew the fil- ter to let the wa- ter flow out. 4. When the container is full of water, screw the filter again and empty the con- tainer. Do steps 3 and 4 again and again until no more water flows out from the drain p ump. 1 2 5. U[...]

• Install again the inlet hose. Make sure that the couplings are tight to prevent leakages. • Open the water tap. Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, d o steps (1) through (5) of 'To clean the drain pump'. If necessary, clean the p ump. When you drain the water with the emerg[...]

Problem Possible cau se Possible solution The programme knob is not in the correct position. Turn the programme knob in the correct po- sition. The delay start is set. It is available only for models with the Delay start. To start immediate ly the programme, cancel the delay start. The appliance does not fill with wate r. The water tap is cl osed. [...]

Problem Possible cause Possible solu tion The load is ve ry small. Add more laundry in the drum. The appliance fills with water and drain immedi- ately. The end of t he drain ho se is too low. Make sure that the drain hose is in the cor- rect position. Refer to 'Installation'. The washing results are not satisfactory. The detergent you u [...]

Installation Unpacking 1 2 A 1. Use the gloves. With a scissor cut the straps and with a cutter remove the ex- ternal film. Do not to discard the plastic cover (A). 2. Remove the polystyrene packaging mate- rials . 3. Remove the internal film. 4. Open the door and remove all the items from the drum. 5. Put the front piece on the floor behind the ap[...]

1 2 6. Remove the polystyrene protection from the bottom. A 7. Install the plastic cover (A), removed from the top of the packaging, to the bottom of the appliance. Remove the adhesive strip and close the bottom of the appli- ance. Attach permanently the plastic cov- er to the bottom of the appliance with the small plastic caps that you can find in[...]

Positioning and levelling • Install the appliance on a flat hard floor. • Make sure that carpets do not stop the air circulation below the appliance. • Make sure that the appliance does not touch the wall or other units x4 x4 • Loosen or tighten the feet to adjust the lev- el. A correct adjustment of the appliance level prevents the vibrati[...]

• On the edge of a sink. Make sure that the plastic guide cannot move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated , [...]

22 www.zanussi.com[...]

23 www.zanussi.com[...]

www.zanussi.com/shop 155219400-A-032012[...]