Zanussi ZWQ 5122 инструкция обслуживания

EN User manual Washing Machine ZWP 581 ZWQ 5102 ZWQ 5103 ZWQ 5122[...]

Contents Safety Information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 How to run a wash cycle? _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Operatin[...]

• Refer to the instructions on the label of each item be- fore washing. • Do not put items into the washing machine which have had stains removed with petrol, alcohol, trichlorethylen etc. If such stain removers have been used, wait until the product has evaporated before putting thes e items into the drum. • Empty pockets and unfold items. ?[...]

Dispenser box Prewash Wash Softener (do not fill above the MAX symbol M ) How to run a wash cycle? Using for the first time • Ensure the electrical and water connections com- ply with the installation instructions. • Remove the polystyrene insert and all other items inside the drum. • Run an initial wash cycle at 90°C, without any washing bu[...]

patible with the selected programme, the “Start/Pause” pushbutton flashes red. “Prewash” option The appliance runs a prewash at 30°C max. “Quick” option The washing time will be reduced depending on the pro- gramme selected. “Extra Rinse” option The washing machine will add one or more rinses during the cycle. This option is recomm[...]

Programme / Type of washing Load Available options Synthetics (30° - 60°) : Synthetic fabrics, body linen, coloured fabrics, non-iron shirts, blouses. Max. spin speed: 900 rpm (850 rpm for model ZWP581) 2,5 kg Rinse hold, Quick, Prewash, Extra rinse, De- lay start Easy iron (40°) : For cottons and synthetics. Re- duces creasing and makes ironing[...]

Programme / Type of was hing Load Available options Spin : A spin cycle from 500 to 850 rpm for mod- el ZWP581/ 1000 rpm for model ZWQ5102,ZWQ5103/ 1200 rpm for model ZWQ5122 after a Rinse hold option. 5,5 kg Delay start 1) We recommend not to add any detergent for prewash phase. Care and clea ning Unplug the appliance before cleaning. Descaling th[...]

Operating Problems Numerous checks were carried out on your appliance be- fore it left the factory. However, should you notice a mal- function, please refer to the sections below before contact- ing the after-sales service. Problems Causes The appliance doesn’t start or doesn’t fill: • the appliance isn’t plugged in correctly, the electrica[...]

Problems Causes The wash cycle is much too long: • the water inlet filters are dirty (see “Care and cleaning ”), • the power or water supply has been cut off, • the motor overheating detector has been activated, • the water inlet temperature is lower than usual, • the foam detection security system has been activated (too much de terg[...]

Technical Specifications DIMENSIONS Height Width Depth 850 mm 400 mm 600 mm LINE VOLTAGE /FREQUENCY POWER CONSUMPTION FUSE 230 V / 50 Hz 2300 W 10 A Level of protection against ingress of solid particles and moisture IPX4 Water supply Cold w ate r WATER PRESSURE Minimum Maximum 0,05 MPa (0,5 bar) 0,8 MPa (8 bar) Connection to water supply Type 20/2[...]

Unpacking 2 1 1 2 2 1 Untying AB D C A 1 2 B 2 1 B D Keep the transit bolts for when you move the appli- ance. To install the appliance at the same level as neigh- boring furniture, cut these plastic pieces. Water supply 90 O 90 O 90 O In case of necessity move the inlet hose in the direc- tion shown on picture. To make this loose the inlet hose ri[...]

Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative con[...]

13[...]

14[...]

15[...]

www.zanussi.com/shop 192987810-A-222011[...]