Zebex Z-3151HS (U) инструкция обслуживания

Advance d Handh eld High-Speed Laser Scanne r 1[...]

[...]

Advance d Handh eld High-Speed Laser Scanne r i U SER ’ S M ANU AL Re vision H ist ory Changes t o the original manual are lis te d below: V er sion Dat e Description of V ersion 1.0 Jun. 25, 2010 Initial release 1.1 Sep. 07, 2 010 Add c onfigur ation bar code value. Add se ttings of Code 1 1, Stan dard 2 of 5, In dustrial 2 of 5, T elepen, Matri[...]

Advance d Handh eld High-Speed Laser Scanne r ii U SER ’ S M ANU AL Import an t Notice No warranty of any kin d is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitne ss for any particular purpose. We are not liable for any errors containe d herein nor for incidental or consequential dama[...]

Advance d Handh eld High-Speed Laser Scanne r iii U SER ’ S M ANU AL Laser Saf ety This equipment ge nerate s, uses, and c an r adiate r adio fre quency ener gy . If not ins talled and used in accor dance with the instructions in this manual, it may cause interfer ence to ra dio communications. T he equipment has been t este d and foun d to com p[...]

Advance d Handh eld High-Speed Laser Scanne r iv U SER ’ S M ANU AL Table of Contents Important No tice............................................................................................................... ... ii Introduction .................................................................................................................[...]

Advance d Handh eld High-Speed Laser Scanne r 1 U SER ’ S M ANU AL Introduction This scanner is a newly rele ased handheld sing le-line laser scanner with a cutting-e dge scan engine. It utiliz es the omnidirection a l technology to tr ansform sev en laser lines into one a n d perf orms a superb scanning speed a t 500 scans per seco nd. The built[...]

Advance d Handh eld High-Speed Laser Scanne r 2 U SER ’ S M ANU AL Scanner and Accessories The high-speed single line laser handheld scanner pack age cont ains: 1 ea. 1 ea. - Single-line laser handheld scanner - Optional scanner stand (with stand) (without stand) 1 ea. Communication cable (Model depends on customer needs.) 1 ea. 5V Power adapter [...]

Advance d Handh eld High-Speed Laser Scanne r 3 U SER ’ S M ANU AL Connecting to a Host 1. Turn off the host system. 2. Connect the 10-pin RJ45 male connector into the jack on the scanner unt i l a “ click” is heard. If the scanner is powered directly from the host suppl y, skip to step 5. 3. If necessary, plug the L-s haped plug of the power[...]

Advance d Handh eld High-Speed Laser Scanne r 4 U SER ’ S M ANU AL Disconnecting the Cable from the Scanner The communication cable is d esigned to be field-replaceable. Prior to removing the cable from the scanner, it is highly advised to turn off the power of the host system and disconnect the power supply from the cable. 1. Locate the sm all h[...]

Advance d Handh eld High-Speed Laser Scanne r 5 U SER ’ S M ANU AL How to Scan The scanner can be operated in two different modes: “Handheld Mode” and “Stand Mode.” The following explain s how these can be achieved. Scanning in Handheld Mode 1. When the scanner is removed from the stand, the H andheld Mode is automatically activated. 2. P[...]

Advance d Handh eld High-Speed Laser Scanne r 6 U SER ’ S M ANU AL Scanner Outline Blue LED Red LED Green LED Cable Connection Trigge r Pin Hol e Exit Window Buzzer Sound Hole[...]

Advance d Handh eld High-Speed Laser Scanne r 7 U SER ’ S M ANU AL Assembling the Optional Stand The optional self-supporting stand is to facilitate the usage of your scanner. It moves freely and can be pla c ed anywhere on co untertops. It can be tilted to a maximum of 60 degrees. 60 ° T o attach the scanner t o the optional s tand, hook the sc[...]

Advance d Handh eld High-Speed Laser Scanne r 8 U SER ’ S M ANU AL Visible Indicators There are three blue LED indicator bars a nd two green/red LED indicators on top of the scanner. These indicate the operational status of the scanner. LED Status LED Indication Blue, red, and green LEDs are off *The scanner is not powered. * When the scanner is [...]

Advance d Handh eld High-Speed Laser Scanne r 9 U SER ’ S M ANU AL Troubleshooting Problem Possible Cause Solution The scanner has no reaction; no LED, beeps, or laser The power is not ON Refer to the “Conne cting to a Host” section of the manual The scanner is functioning but is not decoding. *The symbology of the barcode might be disabled. [...]

Advance d Handh eld High-Speed Laser Scanne r 10 U SER ’ S M ANU AL Configuration Modes This scanner has two programming modes. Barcodes This scanner can be configur ed by scanning the barcodes located in the below “Programming Guide” section. Please refer to this guide for instructions. Serial Programming This mode gives end-users the abilit[...]

Advance d Handh eld High-Speed Laser Scanne r 11 U SER ’ S M ANU AL Programming Guide Scanning a serie s of progr amming barc ode labels can configur e the scanner s. This allows deco ding options and in terface pr otocols to be t ailored to a specifi c application. The configur ation is st ored in non- volatile memory and will not be lost b y re[...]

Advance d Handh eld High-Speed Laser Scanne r 12 U SER ’ S M ANU AL Factory Default Setting Scanner Operation Para m ete r Defa ult Same code dela y 500msec Beeping frequenc y Medium Beeping dura tion 50msec LED/Beep bef ore data tr ansmission On T rigger mode (handheld mode) Enable Stand mode Enable Header and tr ai ler None Inter me ssage delay[...]

Advance d Handh eld High-Speed Laser Scanne r 13 U SER ’ S M ANU AL Symbologies Para m ete r Defau lt Decode r Select ion EAN/UPC Enable Code 39 Enable Code 32 Disable Codabar Disable ITF 2 of 5 Enable MSI Disable Chinese P ost Code Disable Code 93 Enable Code 128 Enable EAN-128 Disable T elepen Disable Code 11 Disable Standar d 2 of 5 Disable In[...]

Advance d Handh eld High-Speed Laser Scanne r 14 U SER ’ S M ANU AL GS 1 Da taB ar Lim ited ide nt if ier co de RL GS1 DataBar Exp anded identifier code RX PDF417 identi fier code X Barcode Leng th maximum 32 Codabar Code 11 Standar d 2 of 5 Industrial 2 of 5 Matrix 2 of 5 minimum 6 maximum 62 Code 39 Code 93 Code 128 minimum 3 maximum 16 Chinese[...]

Advance d Handh eld High-Speed Laser Scanne r 15 U SER ’ S M ANU AL Program Procedure Using Barcode Manual 1. P ower up the scanner . 2. Sc an the Start of Configur ation barcode. 3. Sc an the barcode f or the desir ed fe ature. Multiple f eature s can be enabled/disabl ed bef ore sc anning the End of Con figuration bar code. 4. Sc an the End of [...]

Advance d Handh eld High-Speed Laser Scanne r 16 U SER ’ S M ANU AL P arame ter setting Start O f Configura tion Scanner Operation 1. Sy st em Function Set ting Barcode Value Barcode Label Description -- Reset ( return to f actory default) %/ Display firm war e version ++ Abort :e xit pro gramming mo de with no update KE94 Return to cust omer def[...]

Advance d Handh eld High-Speed Laser Scanne r 17 U SER ’ S M ANU AL Start O f Configura tion 2. Interfa ce S ettin g Barcode Value Barcode Label Description KE97 Return to USB def ault KE99 Return to RS -232 default KE87 Enable USB virtual COM (V irtual COM driver require d. For installa tion steps re fer to Appendix 1.) KE01 Enable IBM PC/ A T /[...]

Advance d Handh eld High-Speed Laser Scanne r 18 U SER ’ S M ANU AL Start O f Configura tion 3. General S can Mode Setting Handheld Operation Barcode Value Barcode Label Description SM01 Tr i g g e r M o d e  The scanner becomes i nactive as soon as the da ta is transmitted. It must be triggere d to become active ag ain. SM02 Auto Scan Mode ?[...]

Advance d Handh eld High-Speed Laser Scanne r 19 U SER ’ S M ANU AL Start O f Configura tion Stand Operation Barcode Value Barcode Label Description SM20 IR On (Au to scan on st and)  The scanner automatically activates laser, scans and transmits data when detecting object. SM21 IR Off (Scan by manual trigg er) End Of Configura t ion[...]

Advance d Handh eld High-Speed Laser Scanne r 20 U SER ’ S M ANU AL Start O f Configura tion 4. Operation Function Setting Good Read Beeper Tone Selection Barcode Value Barcode Label Description GR02 Low beeper tone GR01 Medium beeper tone GR03 High beeper tone GR05 Speaker disable Beeper Sound Selection Barcode Value Barcode Label Description GR[...]

Advance d Handh eld High-Speed Laser Scanne r 21 U SER ’ S M ANU AL Start O f Configura tion Beeper Volume Selection Barcode Value Barcode Label Description GR20 Loud GR21 Medium GR22 Slight Beeper Timing Selection Barcode Value Barcode Label Description LB00 LED/Beep after tr ansmission  Use this barcode to indicate a "good read" af[...]

Advance d Handh eld High-Speed Laser Scanne r 22 U SER ’ S M ANU AL Start O f Configura tion Inter Message Delay Barcode Value Barcode Label Description IM01 0 ms IM02 100 ms IM03 500 ms IM04 1000 ms Inter Character Delay Barcode Value Barcode Label Description IC01 0ms IC00 5ms IC02 10ms IC03 20ms IC04 50ms IC05 2ms End Of Configura t ion[...]

Advance d Handh eld High-Speed Laser Scanne r 23 U SER ’ S M ANU AL Start O f Configura tion Same Code Dela y Barcode Value Barcode Label Description SD01 Same code delay time 50msec SD02 Same code delay time 100msec SD03 Same code delay time 200msec SD04 Same code delay time 300msec SD05 Same code delay time 400msec SD06 Same code delay time 500[...]

Advance d Handh eld High-Speed Laser Scanne r 24 U SER ’ S M ANU AL Start O f Configura tion Connection to an Om nidirectional Scanner Inst ea d of co nnecting to a hos t, sometimes the handheld scanner is t o be connecte d to the AUX port o f an omnidirectional sc anner and transmit da ta to the host syst em via this omnidirectional sc anner . S[...]

Advance d Handh eld High-Speed Laser Scanne r 25 U SER ’ S M ANU AL Start O f Configura tion Pulse Light Fla sh On/O ff T imeout Dur ation Barcode Value Barcode Label Description FT01 Fast FT00 Medium FT02 Slow Blue LED Barcode Value Barcode Label Description LE00 When scanner on stand, bl ue LED remains off when decoding LE01 When scanner on sta[...]

Advance d Handh eld High-Speed Laser Scanne r 26 U SER ’ S M ANU AL Start O f Configura tion Int erface Configur ation 1. RS-23 2C I nter face S etti ng Same Code Dela y Barcode Value Barcode Label Description BR09 115200 BR08 57600 BR00 38400 BR01 19200 BR02 9600 BR03 4800 BR04 2400 BR05 1200 End Of Configura t ion[...]

Advance d Handh eld High-Speed Laser Scanne r 27 U SER ’ S M ANU AL Start O f Configura tion Parity Bit Barcode Value Barcode Label Description PB01 Even parity PB02 Odd parity PB03 Mark parity PB04 Space parity PB05 None parity Stop Bit Barcode Value Barcode Label Description SB01 1 stop bit SB02 2 stop bit Dat a Bit Barcode Value Barcode Label [...]

Advance d Handh eld High-Speed Laser Scanne r 28 U SER ’ S M ANU AL Start O f Configura tion Handshaking Protocol Barcode Value Barcode Label Description HP01 None handshaking HP02 ACK/NAK HP03 Xon/Xoff HP04 RTS/CTS LB07 Enable BEEPER ON<BEL> CHA R ACTER LB08 Ignore BEEP ON <BEL> CHARACTER LB09 Disable ACK/NAK timeout beeper LB10 Enab[...]

Advance d Handh eld High-Speed Laser Scanne r 29 U SER ’ S M ANU AL Start O f Configura tion Message Terminator Barcode Value Barcode Label Description DT11 RS-232 message terminator—none DT12 RS-232 message terminator—CR/LF DT13 RS-232 message terminator—CR DT14 RS-232 message terminator—LF DT15 RS-232 message terminator—H-tab DT16 RS-[...]

Advance d Handh eld High-Speed Laser Scanne r 30 U SER ’ S M ANU AL Start O f Configura tion 2. Keyboar d We dge an d USB Interf ace Setting Language Support Barcode Value Barcode Label Description KL00 Interna tional Keyboar d mode (AL T mode) KL01 Keyboard language sup port － USA KL02 Keyboard language sup port － UK KL03 Keyboard language s[...]

Advance d Handh eld High-Speed Laser Scanne r 31 U SER ’ S M ANU AL Start O f Configura tion Keyboard Setting Barcode Value Barcode Label Description CP00 Capital lock on CP01 Capital lock off CP05 Function key e mulation enable CP06 Function key e mulation disable CP18 Send number as normal data CP19 Send number as keypad data CP20 Alphabet foll[...]

Advance d Handh eld High-Speed Laser Scanne r 32 U SER ’ S M ANU AL Start O f Configura tion 3. W ant Emulation Set ting W and emulation is a standar d interf ace but require s special firmwar e. If needed, please con tact your distributo r . Barcode Value Barcode Label Description WD01 All barco de wi ll be decode d and transmit ted in that symb[...]

Advance d Handh eld High-Speed Laser Scanne r 33 U SER ’ S M ANU AL Start O f Configura tion Wand Emulation Spee d Barcode Value Barcode Label Description WS03 W and emulation speed---nor mal WS04 W and emulation speed---high  This option allows the tr ansmission of wand emulation at 3 00us narro w element width WS05 W and emulation speed---hi[...]

Advance d Handh eld High-Speed Laser Scanne r 34 U SER ’ S M ANU AL Start O f Configura tion The Symbologies 1. Codabar Par ameter Se tting Barcode Value Barcode Label Description RC02 Codabar enable ( RD02 Codabar disable CB05 Codabar start/stop character transmission － none CB06 Codabar start/stop character transmission － A,B,C,D CB07 Codab[...]

Advance d Handh eld High-Speed Laser Scanne r 35 U SER ’ S M ANU AL Start O f Configura tion Barcode Value Barcode Label Description CB13 No check character CB14 V alidate modul o 16,but don’t transmit CB15 V alidate modul o 16 and transmit DC50 Codabar dat a redu ndant che ck=off DC51 Codabar dat a redu ndant che ck=1 DC52 Codabar dat a redu n[...]

Advance d Handh eld High-Speed Laser Scanne r 36 U SER ’ S M ANU AL Start O f Configura tion 2. Cod e 39 Parameter Sett ing Barcode Value Barcode Label Description RC01 Code 39 enable RD01 Code 39 disable RC13 Code 32 enable RD13 Code 32 disable DC00 Code 39 dat a redu ndant che ck=off DC01 Code 39 dat a redu ndant check=1 DC02 Code 39 dat a redu[...]

Advance d Handh eld High-Speed Laser Scanne r 37 U SER ’ S M ANU AL Start O f Configura tion Barcode Value Barcode Label Description 3905 Code 39 check digit calcula te and tra nsmit 3906 Code 39 check digit calcula te but without tr ansmit 3907 No check charact er 3908 Code 39 maximum leng th setting 3909 Code 39 minimum length set ting SET Conf[...]

Advance d Handh eld High-Speed Laser Scanne r 38 U SER ’ S M ANU AL Start O f Configura tion 3. Cod e 93 Parameter Sett ing Barcode Value Barcode Label Description RC08 Code 93 enable RD08 Code 93 disable DC30 Code 93 dat a redu ndant che ck=off DC31 Code 93 dat a redu ndant check=1 DC32 Code 93 dat a redu ndant check=2 DC33 Code 93 dat a redu nd[...]

Advance d Handh eld High-Speed Laser Scanne r 39 U SER ’ S M ANU AL Start O f Configura tion 4. Code 128 P aramet er Setting Barcode Value Barcode Label Description RC06 Code 128 enable RD06 Code 128 disable RC10 EAN-128 e nable RD10 EAN-128 disabl e DC40 Code 128 dat a redundan t check=off DC41 Code 128 dat a redundan t check=1 DC42 Code 128 dat[...]

Advance d Handh eld High-Speed Laser Scanne r 40 U SER ’ S M ANU AL Start O f Configura tion 5. Chinese Pos t Code Par ameter Set ting Barcode Value Barcode Label Description RC05 Chinese pos t code enable RD05 Chinese pos t code disable DC60 Chinese pos t code data r edundan t check=off DC61 Chinese pos t code data r edundan t check=1 DC62 Chine[...]

Advance d Handh eld High-Speed Laser Scanne r 41 U SER ’ S M ANU AL Start O f Configura tion 6. MSI /Pl essy Param eter Sett ing Barcode Value Barcode Label Description RC14 MSI enable RD14 MSI disable DC70 MSI dat a redundan t check= of f DC71 MSI dat a redu ndant check= 1 DC72 MSI dat a redu ndant check= 2 DC73 MSI dat a redu ndant check= 3 MS0[...]

Advance d Handh eld High-Speed Laser Scanne r 42 U SER ’ S M ANU AL Start O f Configura tion 7. Code 11 Int erface Se tting Barcode Value Barcode Label Description RC07 Code 11 enable RD07 Code 11 disable 1101 Code 11 maximum length setting 1102 Code 11 minimum length sett ing SET Confirm to sa ve this setting (r equire d for re ading full ASCII [...]

Advance d Handh eld High-Speed Laser Scanne r 43 U SER ’ S M ANU AL Start O f Configura tion 8. ITF 2 of 5 Par ameter Setting Barcode Value Barcode Label Description RC04 ITF 2 of 5 enable RD04 ITF 2 of 5 disable RC09 IA T A code enable RD09 IA T A disable DC80 ITF 25 dat a redun d ant che ck=of f DC81 ITF25 dat a re dundant check=1 DC82 ITF25 da[...]

Advance d Handh eld High-Speed Laser Scanne r 44 U SER ’ S M ANU AL Start O f Configura tion Barcode Value Barcode Label Description IT01 ITF 2 of 5 code maximum leng th setting IT02 ITF 2 of 5 c ode minimum length setti n g IT06 ITF 2 of 5 one fixed leng th setting IT07 ITF 2 of 5 tw o fixe d length set ting SET Confirm to sa ve this setting (r [...]

Advance d Handh eld High-Speed Laser Scanne r 45 U SER ’ S M ANU AL Start O f Configura tion 9. Standar d 2 of 5 Par ameter Set ting Barcode Value Barcode Label Description RC22 Standard 2 of 5 co de enable RD22 Standard 2 of 5 co de disable D051 Standard 2 of 5 co de maximum length setti ng D052 Standard 2 of 5 code minimu m length setting SET C[...]

Advance d Handh eld High-Speed Laser Scanne r 46 U SER ’ S M ANU AL Start O f Configura tion 10. Industrial 2 o f 5 Par ameter Setting Barcode Value Barcode Label Description RC21 Industrial 2 of 5 code e nable RD21 Industrial 2 of 5 code disable D251 Industrial 2 of 5 code maximum length setting D252 Industrial 2 of 5 code minimum lengt h settin[...]

Advance d Handh eld High-Speed Laser Scanne r 47 U SER ’ S M ANU AL Start O f Configura tion 11. UPC/EAN/ JAN P aramet er Set ting Barcode Value Barcode Label Description RC11 EAN con vert to ISSN/ISBN enable RD11 EAN con vert to ISS N/ISBN disable RC03 UPC/EAN/J AN enab le RD03 UPC/EAN/J AN d isable UE01 UPC/EAN/J AN all enable UE02 EAN-8 or EAN[...]

Advance d Handh eld High-Speed Laser Scanne r 48 U SER ’ S M ANU AL Start O f Configura tion Barcode Value Barcode Label Description UE10 Add on 5 only UE11 Add on 2 only UE12 Add on 2 or 5 UE13 For ce UPC-E to UPC-A forma t enable UE14 For c e UPC-E to UPC-A forma t disable UE15 For ce UPC-A to EAN-13 f ormat enable UE16 For ce UPC-A to EAN-13 f[...]

Advance d Handh eld High-Speed Laser Scanne r 49 U SER ’ S M ANU AL Start O f Configura tion Barcode Value Barcode Label Description UE23 T r ansmit EAN-8 check digit enable UE24 T r ansmit EAN-8 check digit disable UE25 T r ansmit EAN-13 check digit enable UE26 T r ansmit EAN-13 check digit disable UE27 T r ansmit UPC-A leadin g charact er enabl[...]

Advance d Handh eld High-Speed Laser Scanne r 50 U SER ’ S M ANU AL Start O f Configura tion Barcode Value Barcode Label Description DC12 UPC-A data redunda nt check=2 DC13 UPC-A data redunda nt check=3 DC14 UPC-E data redundant chec k=off DC15 UPC-E data re du ndant check=1 DC16 UPC-E data redundant chec k=2 DC17 UPC-E data redundant chec k=3 DC[...]

Advance d Handh eld High-Speed Laser Scanne r 51 U SER ’ S M ANU AL Start O f Configura tion UE35 EAN/UPC +a dd-on mandatory for 97 8 / 977 bookland (Supplement requirement, not sent for other) UE38 EAN/UPC +a ddon mandato ry f or 978 / 977 bookland (Supplement requirement, optio nal for other) UE42 EAN/UPC +a ddon mandato ry f or 491 Japanese bo[...]

Advance d Handh eld High-Speed Laser Scanne r 52 U SER ’ S M ANU AL Start O f Configura tion 12. T elepen Par ameter Setting Barcode Value Barcode Label Description RC25 Telepen enable RD25 Telepen disable TE03 Telepen numeric mode enable TE04 AIM Telepen enable End Of Configura t ion[...]

Advance d Handh eld High-Speed Laser Scanne r 53 U SER ’ S M ANU AL Start O f Configura tion 13. Matrix 2 of 5 P arame ter Setting Barcode Value Barcode Label Description RC12 Matrix 2 of 5 enable RD12 Matrix 2 of 5 disable D151 Matrix 2 of 5 maximum length setting D152 Matrix 2 of 5 minimum length setting SET Confirm to sa ve this setting (r equ[...]

Advance d Handh eld High-Speed Laser Scanne r 54 U SER ’ S M ANU AL Start O f Configura tion 14. GS1 DataBar P aramet er Setting There ar e 7 kinds of bar codes in the GS1 Dat aBar family and they are categorize d into three gr oups. Barcode type s in the same gr oup use the same barcodes f or setting. Group R epresent ative Conten ts Group 1 GS1[...]

Advance d Handh eld High-Speed Laser Scanne r 55 U SER ’ S M ANU AL Start O f Configura tion GS1 Dat aBar Limited (F ormally RSS Limit ed) Barcode Value Barcode Label Description RC16 GS1 DataBar Limited ena ble RD16 GS1 DataBar Limited disable SS10 Transmit GS1 DataBar Limited check digit SS11 Don’t transmit GS1 DataBar Limited check digit SS1[...]

Advance d Handh eld High-Speed Laser Scanne r 56 U SER ’ S M ANU AL Start O f Configura tion GS1 Dat aBar Expand ed (F ormally RSS Expande d) Barcode Value Barcode Label Description RC17 GS1 DataBar Expanded enable RD17 GS1 DataBar Expanded disable SS07 GS1 DataBar Expanded/EAN-128 emulation enable SS06 GS1 DataBar Expanded/EAN-128 emulation disa[...]

Advance d Handh eld High-Speed Laser Scanne r 57 U SER ’ S M ANU AL Start O f Configura tion 15. PDF417 Par ameter Setting Barcode Value Barcode Label Description RC31 PDF 417 enable RD31 PDF 417 disable End Of Configura t ion[...]

Advance d Handh eld High-Speed Laser Scanne r 58 U SER ’ S M ANU AL Start O f Configura tion Data Editing 1. Identifier Code Barcode Value Barcode Label Description IS00 Disable identifier code IS01 Enable identifier co de table as f actory sta ndard IS03 Enable identifier co de table a s AIM standard. CI01 Code 39 identifier code set ting CI02 I[...]

Advance d Handh eld High-Speed Laser Scanne r 59 U SER ’ S M ANU AL Start O f Configura tion Barcode Value Barcode Label Description CI08 Codabar identifier c ode setting CI09 Code 128 iden tifier code setting CI10 Code 93 identifier code set ting CI11 MSI identifier code se tting CI12 GS1 DataBar Omnidirectional identifier code setting CI13 GS1 [...]

Advance d Handh eld High-Speed Laser Scanne r 60 U SER ’ S M ANU AL Start O f Configura tion 2. Header and T r ai ler Barcode Value Barcode Label Description CP11 Add c ode leng th as hea d er enable (2 digits) CP12 Add c ode leng th as hea d er disable (2 digits ) HT01 Hea der (Pream ble) HT02 T r ai ler (Pos tamble) HT03 T run cate h eader ch a[...]

Advance d Handh eld High-Speed Laser Scanne r 61 U SER ’ S M ANU AL Start O f Configura tion 3. Multi-Bar code E diting Re fer to Ap pendix 3 f or detail setup st eps. Function Setting Barcode Value Barcode Label Description MC00 Start to edit multi-barcode MC01 Multi-barcode enable MC02 Multi-barcode disable MC03 Apply output s equence  In th[...]

Advance d Handh eld High-Speed Laser Scanne r 62 U SER ’ S M ANU AL Start O f Configura tion Barcod e T ype Setting Barcode Value Barcode Label Description $Q Code39 $A Codabar $B ITF2 of 5 $C Code128 $F C o d e 9 3 $G MSI $E C h i n e s e P o s t C o d e 4 EAN-8 D EAN-13 /D UPC-A $T UPC-E $U GS1 Dat aBar Standa rd $V GS1 DataBar Exp anded $W GS1[...]

Advance d Handh eld High-Speed Laser Scanne r 63 U SER ’ S M ANU AL Appendix 1: USB Virtual COM Driver Installation Contact your d istributor t o get the driv er and follow the s teps below to e nable USB virtual COM port. 1. Connect the han d held scanner and the hos t (e. g. a PC) with a USB int erface cable . 2. Enable USB virtual C OM port wi[...]

Advance d Handh eld High-Speed Laser Scanne r 64 U SER ’ S M ANU AL Appendix 2: Barcode Length Setting Intr oduction The length of a barcode is the number of char acters it co nt ains, including check digits. As list ed in the Def ault Par ameter s section, each barco de type has diff erent de fault length. Y ou ma y change the set ting by the f [...]

Advance d Handh eld High-Speed Laser Scanne r 65 U SER ’ S M ANU AL Appendix 3: Multi-Barcode Editor Intr oduction The multi-barcode e ditor function allows us er s to set up the sequence of barco de data transmission. A fter the configura t ion, the scanner would tr ansmit data in the pr e- progr ammed sequence e ven if the user doe sn’t scan [...]

Advance d Handh eld High-Speed Laser Scanne r 66 U SER ’ S M ANU AL Example If the barcode data transmission sequen ce and requiremen ts are as below: Start of Confi guration Set up the 1 st barco de symbology Set up the 2 nd barco de symbology End of Configuration The 1 st barc ode symbology The 2 nd barcode s ymbology Barc ode type Code 128 Bar[...]

Advance d Handh eld High-Speed Laser Scanne r 67 U SER ’ S M ANU AL Start O f Configura tion Appendix 4: Full ASCII Code 39 Table Code 39 ASCII Hex a- code Code 39 ASCII Hex a- code Full ASCII ---NUL 00 Full ASCII ---SI Function ke y-----“Shift ” 0F Full ASCII ---SOH Function ke y-----“Ins” 01 Full ASCII ---DLE Function ke y-----“5(num)[...]

Advance d Handh eld High-Speed Laser Scanne r 68 U SER ’ S M ANU AL Start O f Configura tion Full ASCII C ode 39 T able Code 39 ASCII Hex a- code Code 39 ASCII Hex a- code Full ASCII ---RS Function ke y-----“CTL(L)” 1E Full ASCII ---- 2D Full ASCII ---US Function ke y-----“ AL T(L)” 1F Full ASCII ---. 2E Full ASCII ---SP 20 Full ASCII ---[...]

Advance d Handh eld High-Speed Laser Scanne r 69 U SER ’ S M ANU AL Start O f Configura tion Full ASCII C ode 39 T able Code 39 ASCII Hex a- code Code 39 ASCII Hex a- code Full ASCII ---< 3C Full ASCII ---K 4B Full ASCII ---= 3D Full ASCII ---L 4C Full ASCII ---> 3E Full ASCII ---M 4D Full ASCII ---? 3F Full ASCII ---N 4E Full ASCII ---@ 40[...]

Advance d Handh eld High-Speed Laser Scanne r 70 U SER ’ S M ANU AL Start O f Configura tion Full ASCII C ode 39 T able Code 39 ASCII Hex a- code Code 39 ASCII Hex a- code Full ASCII ---Z 5A Full ASCII ---i 69 Full ASCII ---[ 5B Full ASCII ---j 6A Full ASCII --- 5C Full ASCII ---k 6B Full ASCII ---] 5D Full ASCII ---l 6C Full ASCII ---^ 5E Full [...]

Advance d Handh eld High-Speed Laser Scanne r 71 U SER ’ S M ANU AL Start O f Configura tion Full ASCII C ode 39 T able Code 39 ASCII Hex a- code Full ASCII --- x 78 Full ASCII ---y 79 Full ASCII ---z 7A Full ASCII ---{ 7B Full ASCII ---| 7C Full ASCII ---} 7D Full ASCII ---~ 7E Full ASCII ---DEL 7F End Of Configura t ion[...]