Zenoah BCZ2602DL инструкция обслуживания

GB-1 G B BCZ2602DL BCZ2602DL G B OWNER’S MANUAL BRUSHCUTTERS 848JA193A3 (708)[...]

GB-2 BCZ2602DL EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS ZENOAH CO., L TD. Masahiko GOUDA 1st April 2007 W ARNING!!! RISK OF DAMAGING HEARING Wear head, eye and ear protection. guaranteed 108 dB(A) measured 106.47 dB(A) MODEL 25.4 cm 3 SOUND LEVEL VIBRA TION LEVEL ISO 10884 LwA ISO 7916 idling 5.9 m/s 2 racing 7.0 m/s 2 86 dB(A) EN27917 LpA APPR[...]

GB-3 G B BCZ2602DL SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail. W ARNINGS IN THE MANUAL W AR[...]

GB-4 BCZ2602DL 2. Specification Overall size (L 3 W 3 H ) ........................................................... 1830 x 400 x 365 mm Dry weight .......................................................................................................... 5.7 kg Engine T ype ..........................................................................[...]

GB-5 G B BCZ2602DL 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer fr om whom you p[...]

GB-6 BCZ2602DL 5. For safe operation part nor the throttle come into contact with any obstacle when the engine starts. W ARNING Never place the throttle into the high-speed position when starting the engine. 3. After star ting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved fully back to its or[...]

GB-7 G B BCZ2602DL • IF SOMEONE COMES 1. Guard against hazardous situa- tions at all times. W arn adults to keep pets and children away fr om the area. Be careful if you ar e ap- proached. Injury may result fr om flying debris. 2. If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gine before turn[...]

GB-8 BCZ2602DL BLADE 1. Put the angled bar into the side holes of the inner holder and the gearcase. 2. Remove the blade bolt (Lefthanded) and the outer holder from the gearshaft. 3. Put the blade onto the inner holder . Make the marked side face the holder . 4. Put the outer holder onto the gearshaft making the recessed side face the blade. 5. Fas[...]

GB-9 G B BCZ2602DL ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENOAH genuine oil) • Exhaust emission are controlled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material during combustion. • [...]

GB-10 BCZ2602DL ST AR TING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine. 3. Push the pr[...]

GB-11 G B BCZ2602DL ADJUSTING THROTTLE CABLE • The nor mal play is 1 or 2 mm when measur ed at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1. When the engine tends to stop fr equently at idling mode, turn the adjusting screw clockwise. 2. When the c[...]

GB-12 BCZ2602DL W ARNING CONTROLLING BLADE BOUNCE • Kick out can cause serious personal injur y . Carefully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in contr ol of the unit if kick out does occur . 1. What causes kick out: • Kick out can occur [...]

GB-13 G B BCZ2602DL 2. Y ou can avoid thr own debris by sweeping from your left to the right. 3. Use a slow , deliberate action to cut heavy gr owth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth. 4. Never swing the unit so hard as you ar e in danger of losing your [...]

GB-14 BCZ2602DL AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm, soapy water as requir ed. Dr y completely before in- stalling. If the element is broken or shrunk, r eplace with a new one. FUEL FIL TER • When the engine runs shor t of fuel supply , check the fuel cap a[...]

GB-15 G B BCZ2602DL IMPORT ANT • Note that using any spark plug other than those desig- nated may result in the engine failing to operate properly or in the engine becoming overheated and damaged. • T o install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench. MUFFLER W ARNIN[...]

GB-16 BCZ2602DL 12. T r oubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged → clean carburetor adjustment scr ew → out of normal range → adjust to normal range sparking (no spark) → spark plug is fouled/wet → clean/d[...]