Zenoah BCZ2610DL инструкция обслуживания

GB-1 G B BCZ2610DL BCZ2610DL G B OWNER’S MANUAL BRUSHCUTTER 848JPX93A0 (801)[...]

GB-2 BCZ2610DL EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS W ARNING!!! RISK OF DAMAGING HEARING W ear head, ey e and ear protection. Husqvarna Zenoah Co., Ltd. Masahiko GOUDA 1st January 2008 BCZ2610DL 80100101 and up APPRO V AL NUMBER OF CE EXHA UST EMISSION REGULA TION DIRECTIVE 97/68/EC AMENDED 2002/88/EC e13 * 97/68SH2G3 * 2002/88 * 0404 * 00 [...]

GB-3 G B BCZ2610DL SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern cr itical points which must be taken into consideration to pre vent possib le serious bodily injury , and f or this reason y ou are requested to read all such instructions carefully and f ollow them without f ail. W ARNINGS IN THE MANU[...]

GB-4 BCZ2610DL 2. Specification Overall size (L  W  H) ........................................................... 1830 x 400 x 365 mm Dry weight .......................................................................................................... 6.0 kg Engine T ype .......................................................................[...]

GB-5 G B BCZ2610DL 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer fr om whom you p[...]

GB-6 BCZ2610DL 5. For safe operation contact with any obstacle when the engine starts. W ARNING Never place the thr ottle into the high-speed position when starting the engine. 3. After starting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved fully back to its original position. If it continues[...]

GB-7 G B BCZ2610DL • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area. Be car eful if you are ap- proached. Injury may result fr om flying debris. 2. If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gine before tur[...]

GB-8 BCZ2610DL MIN SP ACING About 48 cm SUSPENSION POINT arrow mark 6. Set up SUSPENSION POINT NOTE Be the SUSPENSION POINT in the location of the arrow mark. INST ALLING HANDLE NOTE The handle is put during the arrow mark. • Mount the handle to the shaft tube and suspension point it at a location that is comfortable to you. INST ALLING CUTTING A[...]

GB-9 G B BCZ2610DL 7. Fuel ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENO AH genuine oil) • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq., carburation, ignition timing and por t timing) with- out addition of an y major hard ware or the intro- duction of an inert material during com[...]

GB-10 BCZ2610DL ST ART Stop Start Stop switch W ARNING The product is equipped with a centrifugal c lutch mechanism, so the cutting attachment begins to r o- tate as soon as the engine is started by putting the throttle into the start position. When starting the en- gine, place the product onto the gr ound in a flat c lear area and hold it firmly i[...]

GB-11 G B BCZ2610DL ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1. When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise. 2. When the cutt[...]

GB-12 BCZ2610DL CUTTING WORK (LINE HEAD USAGE) W ARNING 1. Alwa ys wear eye pr otection such as saf ety goggles. Ne ver lean over the r otating cutting head. Rocks or other debris could be thr own into e yes and face and cause serious personal injury . 2. K eep the cutting attachment guar d in place at all times when the unit is operated. TRIMMING [...]

GB-13 G B BCZ2610DL 9. Maintenance BLADE • Check the blade and the fasteners for looseness, cracking, or bending. • Check the cutting edges and reform with a flat file. (A) Saw blade (B) 8-teeth blade (C) 3-teeth blade Point : 1. Keep the end corner sharp. 2. Round the root of the edge, using r ound file. 3. Do not use water when using a grinde[...]

GB-14 BCZ2610DL IMPORT ANT • Note that using any spark plug other than those desig- nated may result in the engine failing to operate properly or in the engine becoming overheated and damaged. • To install the spark plug, first turn the plug until it is finger tight, then tighten it a quar ter turn more with a sock et wrench. MUFFLER W ARNING ?[...]

GB-15 G B BCZ2610DL Cylinder Intake air cooling v ent • When chec king the machine to make sure that it is okay bef ore using it, chec k the area ar ound the m uffler and remove an y wood c hips or leaves which have attac hed themselves to the brushcutter . F ailing to do so could cause the muf- fler to become overheated and that in turn could ca[...]

GB-16 BCZ2610DL 12. T r oubleshooting guide Case 1. Starting failure CHECK PROB ABLE CA USES A CTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged → clean carburetor adjustment scr ew → out of normal range → adjust to normal range sparking (no spark) → spark plug is fouled/wet → clea[...]