Zenoah BCZ3200DL инструкция обслуживания

GB-1 G B BCZ3200DL / BCZ3200DW BCZ3200DL BCZ3200D W G B OWNER’S MANUAL BRUSHCUTTERS 848JCG93A1 (704)[...]

GB-2 BCZ3200DL / BCZ3200DW EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS 29.5 cm 3 SOUND LEVEL VIBRA TION LEVEL ISO 10884 LwA measured 84.3 dB(A) 86.2 dB(A) guaranteed 110 dB(A) 111 dB(A) ISO 7916 idling 2.9 m/s 2 racing 5.2 m/s 2 MODEL LpA EN27917 29.5 cm 3 98 dB(A) 97 dB(A) BCZ3200DL BCZ3200DW 3.3 m/s 2 4.6 m/s 2 DIRECTIVE 89/336/EEC, 98/37/EC BCZ[...]

GB-3 G B BCZ3200DL / BCZ3200DW SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to pre vent possib le ser ious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail. W ARNINGS IN [...]

GB-4 BCZ3200DL / BCZ3200DW 2. Specification BCZ3200DL / BCZ3200DW Overall size (L x W x H) ................................ 1860 x 395 x 325 / 1860 x 610 x 520 mm Dry weight .................................................................................................. 5.7 / 6.1 kg Engine Model ...................................................[...]

GB-5 G B BCZ3200DL / BCZ3200DW b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be diffi- cult to gain a clear view of the working area. c. During rain storms, during lightning storms, at times of strong or gale-for ce winds, or at any other times when weather conditions might make it[...]

GB-6 BCZ3200DL / BCZ3200DW BEFORE ST ARTING THE ENGINE 1. The area within a perimeter of 15 m (50 ft) of the person using the product should be consider ed a hazar dous area into which no one should enter . If necessary , yellow warning r ope, warning signs should be placed ar ound the perimeter of the ar ea. When work is to be performed simultaneo[...]

GB-7 G B BCZ3200DL / BCZ3200DW • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area. Be careful if you ar e ap- proached. Injury may result fr om flying debris. 2. If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gin[...]

GB-8 BCZ3200DL / BCZ3200DW INST ALLING HANDLE (BCZ3200DL) • Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. INST ALLING HANDLE (BCZ3200DW) 1. Loosen the 4bolts on the upper cap and insert the handles equally . Retighten the bolts. 2. Put the handle assembly into the bracket and put the upper cap over it. [...]

GB-9 G B BCZ3200DL / BCZ3200DW ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 <when using ZENOAH genuine oil> • Exhaust emission are controlled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material durin[...]

GB-10 BCZ3200DL / BCZ3200DW ST ARTING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine. 3. [...]

GB-11 G B BCZ3200DL / BCZ3200DW ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle speed adjuster 1. When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise. 2. Wh[...]

GB-12 BCZ3200DL / BCZ3200DW W ARNING CONTROLLING BLADE BOUNCE • Blade thrust can cause serious personal injury . Care- fully study this section. It is important that you under - stand what causes blade thrust, how you can r educe the chance of blade thrust and how you can remain in control of the unit if blade thrust does occur . 1. What causes b[...]

GB-13 G B BCZ3200DL / BCZ3200DW 8. Operation 3. Use a slow , deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light gr owth. 4. Never swing the unit so hard as you ar e in danger of losing your balance or control of the unit. 5. Tr y to contr [...]

GB-14 BCZ3200DL / BCZ3200DW W ARNING • Make sure that the engine has stopped and is cool before performing any service to the machine. Contact with moving cutting head or hot muffler may result in a per sonal injury . AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm, so[...]

GB-15 G B BCZ3200DL / BCZ3200DW IMPORT ANT • If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the brushcutter . PROCEDURES TO BE PERFORMED AFTER EVER Y 100 HOURS OF USE 1. Remove the muffler , i[...]

GB-16 BCZ3200DL / BCZ3200DW 12. T r oubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged → clean carburetor adjustment scr ew → out of normal range → adjust to normal range sparking (no spark) → spark plug is fouled/wet[...]