Zenoah BCZ3200DW инструкция обслуживания

GB-1 G B BCZ3200DL / BCZ3200DW BCZ3200DL BCZ3200D W G B OWNER’S MANUAL BRUSHCUTTERS 848JCG93A0 (511)[...]

GB-2 BCZ3200DL / BCZ3200DW EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS W ARNING!!! RISK OF D AMA GING HEARING IN NORMAL CONDITIONS OF USE, THIS MACHINE MA Y INVOL VE A DAIL Y LEVEL OF PERSONAL EXPOSURE TO NOISE FOR THE OPERA TOR EQUAL TO OR GREA TER THAN 85 dB(A) 29.5 cm 3 SOUND LEVEL VIBRA TION LEVEL ISO 10884 LwA measured 84.3 dB(A) 86.2 dB(A) g[...]

GB-3 G B BCZ3200DL / BCZ3200DW SAFETY FIRST Instructions contained in warnings within this manual mar ked with a symbol concern cr itical points which must be taken into consideration to pre vent possible serious bodily injury , and f or this reason y ou are requested to read all such instructions carefully and follo w them without fail. W ARNINGS [...]

GB-4 BCZ3200DL / BCZ3200DW 2. Specification BCZ3200DL / BCZ3200D W Overall size (L 3 W 3 H) ............................. 1860 x 395 x 325 / 1860 x 610 x 520 mm Dry weight .................................................................................................. 5.7 / 6.1 kg Engine Model .....................................................[...]

GB-5 G B BCZ3200DL / BCZ3200DW b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be diffi- cult to gain a clear view of the working area. c. During rain storms, during lightning storms, at times of strong or gale-for ce winds, or at any other times when weather conditions might make it[...]

GB-6 BCZ3200DL / BCZ3200DW BEFORE ST ARTING THE ENGINE 1. The area within a perimeter of 15 m (50 ft) of the person using the product should be consider ed a hazardous ar ea into which no one should enter . If necessary , yellow warning rope, warning signs should be placed around the perimeter of the area. When work is to be perfor med simulta- neo[...]

GB-7 G B BCZ3200DL / BCZ3200DW eration or immediately after shutting down the engine. Doing so could re- sult in serious burns or electrical shock. • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area. Be car eful if you are ap- proached. Injury may result fr om flyin[...]

GB-8 BCZ3200DL / BCZ3200DW INST ALLING HANDLE (BCZ3200DL) • Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. INST ALLING HANDLE (BCZ3200DW) 1. Loosen the 4bolts on the upper cap and insert the handles equally . Retighten the bolts. 2. Put the handle assembly into the bracket and put the upper cap over it. [...]

GB-9 G B BCZ3200DL / BCZ3200DW ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 <when using ZENO AH genuine oil> • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq., carburation, ignition timing and por t timing) with- out addition of an y major hard ware or the introduc- tion of an inert material [...]

GB-10 BCZ3200DL / BCZ3200DW ST ARTING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine. 3. [...]

GB-11 G B BCZ3200DL / BCZ3200DW ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle speed adjuster 1. When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise. 2. Wh[...]

GB-12 BCZ3200DL / BCZ3200DW W ARNING CONTROLLING BLADE BOUNCE • Blade thrust can cause serious personal injury . Care- fully study this section. It is important that you under - stand what causes blade thrust, how you can reduce the chance of blade thrust and how you can remain in control of the unit if blade thrust does occur . 1. What causes bl[...]

GB-13 G B BCZ3200DL / BCZ3200DW 8. Operation 3. Use a slow , deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth. 4. Never swing the unit so hard as you ar e in danger of losing your balance or control of the unit. 5. Tr y to control[...]

GB-14 BCZ3200DL / BCZ3200DW W ARNING • Make sure that the engine has stopped and is cool before perf orming any service to the machine. Con- tact with moving cutting head or hot m uffler may result in a personal injury . AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm,[...]

GB-15 G B BCZ3200DL / BCZ3200DW that it is necessary to remove the engine cover shown in in or der to be able to vie w the upper part of the cylinder . IMPORT ANT • If waste gets stuc k and causes bloc kage around the intake air cooling v ent or between the cylinder fins, it ma y cause the engine to overheat, and that in turn may cause mechanical[...]

GB-16 BCZ3200DL / BCZ3200DW 12. T r oubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged → clean carburetor adjustment scr ew → out of normal range → adjust to normal range sparking (no spark) → spark plug is fouled/wet[...]