Zenoah LRTZ2600 инструкция обслуживания

GB-1 G B LRTZ2600 LR TZ2600 G B OWNER’S MANUAL LONG REACH TRIMMER 848A2N93A1 (704)[...]

GB-2 LRTZ2600 EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS SOUND LEVEL VIBRA TION LEVEL ISO11094, EN774 LwA measur ed guaranteed ISO 7916 racing MODEL LpA EN774 idling LRTZ2600 25.4 cm 3 99 dB(A) 108.2 dB(A) 110 dB(A) 2.05 m/s 2 7.35 m/s 2 EC DECLARATION OF COMFORMITY We, ZENOAH CO ., L TD. 1-9, Minamidai, Kawagoe, Saitama, Japan declare in sole re[...]

GB-3 G B LRTZ2600 1. Par ts location (1) Loop handle (2) Sholder strap hanger (3) Ignition switch (4) Throttle cable (5) Throttle lev er (6) Throttle set button (7) Drive shaft housing (8) Spark arrester (9) Star ter knob (10) Fuel tank (11) Primer pump (12) Chok e le ver (13) Air cleaner cov er (14) Blade (15) Gear case SAFETY FIRST Instructions c[...]

GB-4 LRTZ2600 Model LRTZ2600 Overall size (LxWxH) mm 2300 x 400 x 365 Dry weight kg 6.3 Engine T ype Air -cooled 2-stroke gasoline Model Zenoah GZ25N Max output rpm 1.2Hp (0.9kW) at 7500min -1 Idle speed rpm 3000 ± 200min -1 Displacement cm 3 25.4 Fuel Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil) Carburetor W albro Diaphragm type [...]

GB-5 G B LRTZ2600 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer fr om whom you purchased the pr od- uct[...]

GB-6 LRTZ2600 contact with any obstacle when the engine starts. W ARNING Never place the throttle into the high-speed position when starting the engine. 3. After starting the engine, check to make sure that the cutting at- tachment stops moving when the throttle is moved fully back to its original position. If it continues to move even after the th[...]

GB-7 G B LRTZ2600 • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area. Be car eful if you ar e ap- proached. Injury may result fr om flying debris. 2. If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gine before tur[...]

GB-8 LRTZ2600 MOUNTING ENGINE 1. Push the drive shaft housing toward the clutch hous- ing and move it by hand to check that the drive shaft is engaged with the gears. 2. Insert the drive shaft housing into the clutch housing until it bottoms, and align the positioning holes on the clutch housing and the shaft tube and install the screw . When diffi[...]

GB-9 G B LRTZ2600 ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENOAH genuine oil) • Exhaust emission are controlled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material during combustion. • T[...]

GB-10 LRTZ2600 IMPORT ANT Av oid pulling the rope to its end or retur ning it b y releas- ing the knob . Such actions can cause star ter f ailures. 6. Move the choke lever downward to open the choke. And restart the engine. 7. Allow the engine to warm up for a several minutes before starting operation. NOTE 1. When restarting the engine immediately[...]

GB-11 G B LRTZ2600 8. Operation WARNING • This product is equipped with extr emely sharp blades, and when used improperly these blades can be ex- tremely danger ous, and impr oper handling can cause accidents which may in turn lead to serious injur y or death. For this reason, you should always be car eful to follow the following instructions whe[...]

GB-12 LRTZ2600 9. Maintenance Every Every Ever y 25 50 100 System/components Procedur e Before hours hours hours Note use after after after fuel leaks, fuel spillage wipe out ✔ fuel tank, air filter , fuel filter inspect/clean ✔✔ r eplace, if necessary see adjusting replace carbur etor idle adjusting screw ✔ idling speed if necessary clean [...]

GB-13 G B LRTZ2600 W ARNING Make sure that the engine has stopped and is cool before performing any service to the machine. Con- tact with moving cutting head or hot muffler may re- sult in a personal injury . AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm, soapy water [...]

GB-14 LRTZ2600 9. Maintenance PROCEDURES TO BE PERFORMED AFTER EV - ER Y 100 HOURS OF USE 1. Remove the muffler , insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muf fler exhaust vent and cylin- der exhaust port at the same time. 2. Tighten all screws, bolts, and fittings. 3. Check to see if[...]

GB-15 G B LRTZ2600 Limited warranty Should any failure occur on the pr oduct under normal oper - ating conditions within the applicable warranty period, the failed part will be replaced or repair ed free of charge by a ZENOAH authorized dealer . W ARRANTY PERIOD: 1 year (6 months if used profession- ally , and 30 days if used for rental purpose) fr[...]