Zhone Technologies Z-PLEX-10-24-DOC-SC инструкция обслуживания

Z-Plex 10 User ’s G uide Model Number: Z-PLEX-10-24-DOC-SC June 2000 Zhone Technolog ies[...]

Model No. Running Head Trade mark s: SECHTOR 300 and Z-Plex are registered trademar ks of Zhone Tech nologies Zhone and th e Zhone logo are regis tered trademarks of Zhone Technolog ies All other trademarks and registered trademar ks are the property of their respective holders. COPYRIGHT © 2000 Zhone Technologies. All rights reserved. This public[...]

REGULATORY INFORMATION Federa l Comm un ic at i on s Comm is s io n (F CC) Part 15 Regula tion For T elephon e Equipme nt The produc t described herein h as been test ed and found to comply wi th the limi ts fo r a Class “A” D igita l Devi ce, pursu ant to Part 15 of th e FCC R ules. Thes e limi ts are de sig ned to provi de reasonab le protec [...]

Model No. Running Head If this equipment (Z-Plex 10) cause s harm to the t elephone n etwork, the telephone compa ny will not ify you in advance th at tempora ry discontin uance of s ervice may b e require d. But if advance no tice isn ’ t p ractical, t he tele phone company will notify th e customer as soon as possibl e. Also, you will be advise[...]

Repairs t o certifi ed equipment sh ould be made b y an author ized Canadi an maintenance facili ty design ated by th e supplier . Any repairs or alter ations made by the user t o this equipme nt, or equi pment malfunct ions, may giv e the tel ecommunicati ons company c ause to request the user to disconn ect the eq uipment. Users shou ld ensure fo[...]

Model No. Running Head[...]

Zhone Technol ogies / vii Contents Contents Chapter 1 Introdu ction 1.1 Product overv iew ..................... ........................... .................. .......................... 1-1 1.2 Features ........ ........................... ........................... ........................... ................. 1-2 1.3 Benefits .................. [...]

viii Zhone Technologies Model No. Running Head Contents 3.4 Alarm ................ ........................... ........................... ........................... ............ 3-5 3.5 Grounding requi rements ....................... ........................... ........................... ... 3-6 3.6 Cabling .............. .....................[...]

Zhone Techno logies / ix Contents Appendi x A Alphab etical Refer ence A.1 Parameter re ference ................................... ........................... ......................... A-1 A.1.1 Configurat ion groups .................... ........................... ........................... ....... A-2 A.1.2 Alphabetic reference ................[...]

x Zhone Technologies Model No. Running Head Contents[...]

Zhone Technologi es / 1-1 Introduction Product overvi ew Chapter 1 Introduction This chapt er intr oduces you t o the featur es and bene fits of the inte grated acces s soluti on that pe rmits voice and data inte gration in a single u nit. It incl udes the f ollowing topi cs: Product o verview page 1-1 Features page 1-2 Benefits page 1-2 TR-08 page[...]

1-2 Zhone Technologies Model No. Running Head Features Introducti on 1.2 Featur es • V oice and data ch annel bank wi th integ ral CSU/DSX interfa ce • Sleek, l ow profile, one rack unit (1 RU) chassi s • From 12 to 1 6 FXS analog vo ice ports • Up to 8 FXO por ts • One high sp eed V .35 data por t • Exte nsive dia gn osti cs • LED [...]

Zhone Technologi es / 1-3 Introduction Managing the Z-Plex When a T1 p ort is co nfigured for TR-08 format , the voic e channels assigned to this port are identif ied by channel number (ac cording to t he TR-TSY -000008 doc ument), whic h may be dif ferent fr om the T1 time slot number . The product su pports onl y Shelf A. The re lation between a [...]

1-4 Zhone Technologies Model No. Running Head Product spe cifications Introduction • T1 config uration, performance st atisti cs, alarm c onditions, an d diagnost ics. • FXS/FXO confi guration, status, and d iagnostics. • Data port configur ation, st atus, and diagnostics . • General chassis man agement, field upgrad es, and alarms. 1.5.2[...]

Zhone Technologi es / 1-5 Introduction Product specifications T1 int erface Physical Fram e f ormat Line c ode Line e qualizat ion CSU li ne bu ild O ut ( L BO) DSX line length Cloc king FDL Input leve l TR08 supp ort Diagno stics T wo RJ48 D4, ESF , SLC9 6 (TR -08) AMI, B8ZS 0 to 133 ft., 134 to 266 ft ., 267 to 533 ft., 534 to 655 ft. 0 dB, -7.5 [...]

1-6 Zhone Technologies Model No. Running Head Product spe cifications Introduction[...]

Zhone Technologi es / 2-1 Installing the Z-Plex Product descr iption Chapter 2 Installing the Z-Plex This chapt er gives you quick, simple i nstruction s to get yo u up and runn ing. Y ou will also learn ho w to instal l and mount the produc t. This chap ter includ es the fol lowing top ics: Product d escript ion page 2 -1 Unpacking the produc t pa[...]

2-2 Zhone Technologies Model No. Running Head Unpacking the produ ct Install ing the Z-Plex 2.1.2 Fr ont panel The Z-Plex front pan el provid es LEDs for moni toring the status of the unit . 2.2 Un pac ki ng the pr oduct This prod uct is shipped as a complete pac kage that incl udes this user ’ s guide. Af ter unpack ing the car ton , check to [...]

Zhone Technologi es / 2-3 Installing the Z-Plex Installing the product 2.2.4 Hard ware, cabli ng, and opti onal access ories The product comes packa ged with an AC power cord to p rovide power to the unit . It is also shipped wi th two angl e brackets a nd screws f or rack mounti ng. 2.2.5 Who to c all f or help Contact y our distr ibutor if a ny i[...]

2-4 Zhone Technologies Model No. Running Head Installing the product Instal ling the Z-Plex 1. Never ins tall te lephone wir ing during a lightnin g storm. 2. N ever i nst al l thi s prod uct in a wet locat ion . 3. Never inst all telep hone jacks in wet lo cat io ns unl ess the jack is speci ficall y desi gned for this pur pose only . 4. Never t[...]

Zhone Technologi es / 2-5 Installing the Z-Plex Rack mounting 2.4 Rack mounting The product chassis comes with b rackets for rack mounting; and the ch assis is designed to accommodate brackets for front ce nter or r ear mounting. T he instal lation sit e for rac k mounting sh ould provide p roper roo m for venti lation and ca ble routing . Note: Ch[...]

2-6 Zhone Technologies Model No. Running Head Locating the product on a desktop Install ing the Z-Plex 2.5 Locating the pr oduct on a desktop Each unit can be eas ily set o n top of a d esk or table. A stable e nvironment i s necess ary for peak perf ormance of each unit. The chassi s should be placed on a fl at, smooth surface, such as a tabl e,[...]

Zhone Technologi es / 3-1 Electric al Installati on Connector type Chapter 3 Electrical Installation When you ar e rea dy to go be yond t he basi cs of th e pro duct, u se this chapte r to lear n sp ecifics on groundi ng, cablin g, and the ne cessary p ower requireme nts for op eration. It inclu des the followin g topics: Connector type page 3 -1 D[...]

3-2 Zhone Technologies Model No. Running Head Data port connector pinouts Electrical Ins tallation 3.2 Data port connector pi nou ts T able 3-2 descr ibes the signals and p ins for t he V .35 data port . The pin assi gnments are associa ted with the u se of Zhone c able part nu mber PRM-000-012 61M (F). W AN 1 line RJ48 T ransmit and recei ve pai[...]

Zhone Technologi es / 3-3 Electric al Installati on Data port connect or pinouts Note: For pur poses of conne ction and f unction, the pr oduct should b e consider ed a DCE. 3.2.1 FXO/F XS conn ectors T able 3-3 lis ts the FXS/FXO conn ector pin outs. 13 Not Connected 14 T r ansmit Data B DTE S 15 T ransmit T iming B DCE Y 16 Re cei ve Data B DCE T[...]

3-4 Zhone Technologies Model No. Running Head Power requirements Electrical Ins tallation 3.2.2 RJ48 connec tor T able 3-4 lists the T1 RJ48 co nnector pinou ts. 3.3 Power requir ements The inst allation sit e should ha ve a 90-26 0V AC power r eceptacl e readily a vailable to powe r up the unit . The unit can als o be powered by -42 to 56 VDC. T[...]

Zhone Technologi es / 3-5 Electric al Installati on Alarm 3.3.1 Power instal lati on 3.3.1.1 AC power installation This prod uct is equ ipped with an AC r eceptacl e located on t he back of th e unit. 3.3.1.2 DC power installation When wiring to an external power source, such as a batte r y ra ck, fuse pa nel, or cir cuit bre aker , make sure t hat[...]

3-6 Zhone Technologies Model No. Running Head Groundi ng requirements Electrical I nstallation Note: Note that the Exte rnal Alarm Plug i s black in co lor , matching the r ecipr ocal blac k r ear panel r eceptacle . Figure 3-2. Alarm closure plug 3.5 Gr ounding re quirements Due to th e UL regula tory re quiremen ts, a mounting stud is requi red[...]

Zhone Technologi es / 3-7 Electric al Installati on Cabling Figur e 3-3. Groundin g the unit 3.6 Cabling T able 3-5 describ es the cab les reco mmended for use with the Z-Plex unit . T ab le 3-5. Recommend ed cables Cable Used fo r Manufactur er Part Num ber Description V oice FXS/FXO ports 800-0006 0-01 50-pin Amphenol ( M) to 50 pin Amphenol ( M)[...]

3-8 Zhone Technologies Model No. Running Head Cabling Electrical I nstallation[...]

Zhone Technologi es / 4-1 Configuring the Z-Plex Using the command line interfac e Chapter 4 Configuring the Z-Plex In this chapter y ou will le arn how to confi gure the Z-Plex uni t using th e CLI. It incl udes the followin g topics: Using the command line interface page 4-1 Quick sta rt syst em configurati on page 4-2 Configur ing SNMP page 4-6 [...]

4-2 Zhone Technologies Model No. Running Head Quick start sys tem co nfiguration Configuring the Z-P lex SET T1CFG:STATE:1:ACTV T o read the cu rrent frame sli ps on the first T1 li n e, en ter the follo wing comm and: GET PMCUR:SLIP:1 Keep in mind the fo llowing i mportant i nformation : • The CLI is case sensit ive . • Keyword s must be ent[...]

Zhone Technologi es / 4-3 Configuring the Z-Plex Quick star t system configuratio n 3. Change the default user password. For example: user> SET USER:PASSWD:zplex321 The passwor d can be from 7 to 12 charac ters long. The password is used any time you lo g into t he Z-P lex u nit t o mana ge it . 4. Configur e SNMP agent addre sses, community str[...]

4-4 Zhone Technologies Model No. Running Head Quick start sys tem co nfiguration Configuring the Z-P lex The fir st time you configure an IP address , you must reboot the syst em. 4.2. 1 L ogging in and out o f the syst em Y ou must log in to the syste m to manage it . Note that onl y one admini strative u ser can be logged in to t he Z-Plex un i[...]

Zhone Technologi es / 4-5 Configuring the Z-Plex Quick star t system configuratio n Configuring the loc al management channel The Z-Plex unit pr ovides an out-of -band RS232 seria l (craft) inte rface for ma naging the unit . T o acce ss the seri al por t, co nfigu re you r te rm inal inte rf ace so ftw a re wit h th e f oll ow in g settin gs: • [...]

4-6 Zhone Technologies Model No. Running Head Configuring SNMP Configuring the Z-Plex The foll owing example configures t he IP over FDL interf ace: user> SET CPUCFG:MASKFDL:1:255.255.255.252 user> SET CPUCFG:IPFDL:1:192.168.8.22 For most ap plications, the defau lt MTU of 1500 i s appropr iate. If you need to change it, use the MTUFDL co m[...]

Zhone Technologi es / 4-7 Configuring the Z-Plex Configuring T1 interfaces user> SET CPUCFG:IPHOST2:1:192.168.21.24 user> SET CPUCFG:IPHOST3:1:192.168.21.25 4.4 Configuring T1 interfaces The two T1 in terface s on the Z-P lex unit c an be used for either v oice or da ta, with the followin g restri ctions: • 24 voice ports are supporte d, an[...]

4-8 Zhone Technologies Model No. Running Head Configuring a T 1 drop and insert interfa ce Configuring the Z-Plex user> SET T1CFG:DS0:1:OFF 4.5 Configuring a T1 dr op and insert interface A T1 drop and insert take s some channe ls from an inc oming T1 int erface and dr ops some of them out to a PBX and th e rest to an outgoing dat a path. The [...]

Zhone Technologi es / 4-9 Configuring the Z-Plex Configuring FXO ports user> SET FXSCFG:TYPE:1:LSFD 6. Specify whether tr unk condit ioning is being used : user> SET FXSCFG:TRNKC:1:ON 7. Specify whether you want the Z- Plex unit to p rovide ri ngback. user> SET FXSCFG:RNGBK:1:ON The defaul t of OFF is appropriat e for cases when the networ[...]

4-10 Zhone Technologies Model No. Running Head Configuring the V.35 data port Configuring the Z-Plex user> SET FX0CFG:TS:2:7-15 5. Specify the FXO type: user> SET FX0CFG:TYPE:2:LS 6. Specify whether you want the Z- Plex unit to p rovide ri ngback. For example: user> SET FXOCFG:RNGBK:2:ON The defaul t of OFF is appropriat e for cases when[...]

Zhone Technologies / 4-11 Configuring the Z-Plex Adding and deleti ng routes 3. Specify the T1 int erface the d ata is com ing in on: user> SET DPCFG:WAN:1:2 4. Specify the number of channels : user> SET DPCFG:NCHAN:1:24 5. Specify the star t channel : user> SET DPCFG:SCHAN:1:1 6. The remai ning commands s pecify the operation control le a[...]

4-12 Zhone Technologies Model No. Running Head Adding and del eting routes Configuring the Z-Plex user> SET ROUTE:DLTNETRT: x:destination:gateway For example , the foll owing command de letes a network rou te (rout e number 2) f rom the 192.168. 0.0 network usin g the gate way 128.23.22.1: user> SET ROUTE:DLNETRT:1:192.168.0.0:128.23.22.1 4[...]

Zhone Technologies / 4-13 Configuring the Z-Plex Adding and deleti ng routes Figur e 4-1. Example routing configuration In the ex ample networ k in Figure 4- 1, the Z-Plex u nit A has two IP interfaces : a DS0 management i nterfac e with an addr ess of 128.23.0.1 ; and an Ethe rnet int erface with an address of 192.168.8 .22 and a net mask of 255.2[...]

4-14 Zhone Technologies Model No. Running Head Adding and del eting routes Configuring the Z-Plex T able 4-1expla ins the i nterfac es in the route table . T able 4-1. Route Display V alues 4.9.4.1 Displaying host r outes T o display inf ormation about all host r outes, enter the ROUTE:HOST ALL:x command. For exampl e: user> GET ROUTE:HOSTALL:[...]

Zhone Technologies / 4-15 Configuring the Z-Plex System maintenance commands user> GET ROUTE:HOST:1 >The Host Destination is: 192.168.21.32 >The Host Gateway is: 12.12.1.1 4.9.4.2 Displaying network r outes T o dis play inform ation about all host route s, enter the ROUTE:NET ALL:x command. For exam ple: user> GET ROUTE:NETALL:1 >Net[...]

4-16 Zhone Technologies Model No. Running Head System maintenance commands Configuring the Z-Plex BANK2 ->Software version : ZPLEX10_1.0.0#6 ->Checksum : 0x50a78d4c Active bank is 1 4.10. 3 Displayi ng times lot usage T o display inf ormation about the T1 ti meslot usag e, enter the following command: user> QUERYTS TS 24, WAN 1, SERVICE [...]

Zhone Technologies / 4-17 Configuring the Z-Plex System maintenance commands 4.10 .6 Acti vatin g code in ban k 1 T o activate t he code in bank 1, enter t he following c ommand: user> ACTIVEBANK1 4.10 .7 Acti vatin g code in ban k 2 T o activate t he code in bank 2, enter t he following c ommand: user> ACTIVEBANK2 4.10 .8 TFTP download ing T[...]

4-18 Zhone Technologies Model No. Running Head System maintenance commands Configuring the Z-Plex[...]

Zhone Technologi es / 5-1 Diagnostics T1 loopbacks Chapter 5 Diagnostics This chapt er describ es how to per form loopbacks on the Z-Pl ex unit inte rfaces. I t also describ es the sys tem ’ s LEDs. It i ncludes the f ollowing topi cs: T1 loopbacks page 5-1 BER testing page 5-3 Data port loopbacks page 5-4 FXO and FXS port s loopback page 5-6 LED[...]

5-2 Zhone Technologies Model No. Running Head T1 loopbacks Diagnostics Figur e 5-1. T1 loopbacks T o activate a loopback, e nter the following command: user> SET T1CFG:LOOPBACK: x :(LINEON/LOCALON) where x is the nu mber of the T1 inter face to loopb ack. T o end the loopba ck, enter the following command: user> SET T1CFG:LOOPBACK: x :(LINE[...]

Zhone Technologi es / 5-3 Diagnostics BER testing 5.2 BER testing The bit error rate (BER) test sends a data pat tern an d measures the bit error ra te on the selected interf ace. The Z-Plex supports BER t ests on enti re T1 lines or on indiv idual ti me slots. The BER test su pports th e following BER t est patter ns: • Quas i-ra n dom sign a l [...]

5-4 Zhone Technologies Model No. Running Head Data port loopbacks Diagnostics user> SET T1CFG:TSBERTOFF: x :(1-24) 5.3 Data port loopbacks The V .35 port sup ports li ne and loca l loopback s: • A line (n etwork) l oopback bre aks the tran smit signa l on the ne twork side bet ween th e data por t and the T1 interfa ce and loops th e data po[...]

Zhone Technologi es / 5-5 Diagnostics Testing FXO and FXS ports Figure 5-2. Data port loopbacks T o activate a data port lo opback, use t he following command: user> SET DPCFG:LOOPBACK:1:(LINE/LOCAL) T o de-activat e a data p ort loopback, u se the fo llowing comman d: user> SET DPCFG:LOOPBACK:1:OFF 5.4 T esting FXO and FXS ports The Z-Plex u[...]

5-6 Zhone Technologies Model No. Running Head Testing FXO and FXS ports Diagnos tics • Loopbacks • Settin g and viewin g the tran smit and re ceive ABCD sig naling bi ts • Settin g the tip a nd ring l eads • Read ing th e tip a nd r ing st atis ti cs 5.4. 1 FXO a nd FXS port s loopba ck The FXO/FXS port s support analog and digital lo opb[...]

Zhone Technologi es / 5-7 Diagnostics Testing FXO and FXS ports Figur e 5-3. FXO and FXS loopbacks 5.4.1.1 Configuring FXO loopbacks T o activate a n FXO port loopbac k, use the fol lowing command: user> SET FXOCFG:LOOP:1:(DGTL/ANLG) where x i s the number of the port t o loopback . T o de-activat e an FXO loopback, use the fo llowing comman d: [...]

5-8 Zhone Technologies Model No. Running Head Testing FXO and FXS ports Diagnos tics user> SET FXSCFG:LOOP:1:OFF 5.4.2 Using test mo de on t he FXO a nd F XS port s FXO and FXS port s can be se t to test mode , during whi ch you can: • Set and vi ew the tr ansmit and rec eive ABCD signa ling bits • Set the tip and ri ng leads • V iew the[...]

Zhone Technologi es / 5-9 Diagnos tics LED indicators 5.4.2.2 V iew ing the receive ABCD signalin g bits The RxAB (rec eive ABCD) set ting is a re ad-only para meter that displays th e ABCD pattern for tes ting the receive side of the ci rcuit. T o view the ABCD recei ve bit patt ern on an FXO po rt, enter the following c ommand: user> GET FXOTS[...]

5-10 Zhone Technologies Model No. Running Head LED indicators Diagnostics 5.5.2 Ethern et LED A single g reen LED indica tes the op erationa l status of the Ether net port. If the LED is blinkin g, the Ether net port is connected and trans mitting t raffi c. 5.5.3 W AN LEDs The W AN L EDs i ndica te the tran s miss ion sta tus o f the tw o T1 int[...]

Zhone Technologies / A- 1 Alphabetical Refe rence Parameter ref erence Appendix A Alphabetical Reference This chapt er pr ovid es a refe renc e to the Z-Ple x CLI param eters , com mand s, and synta x. It al so inclu des s yst em err or me ssag es. It incl u des th e fo llo win g topi cs: Parame ter refere nce page A-1 Command re ference page A-30 [...]

A-2 Zhone Tech nologies Model No. Running Head Parameter reference Alphabeti cal Reference DPCFG 1 Da ta port c onfigurati on, such as activ ati on and clo cki ng. LOOP MODE RNGBK R TLP RxAB ST A TE TEST TRCNTRL TRNKC TRST A T TS TTLP TxAB TYPE W AN F ARPMC UR 1 Curren t far en d stat isti cs for the T1 interf aces. ALLF ARCUR BES ES LOFC SES SLI[...]

Zhone Technologies / A- 3 Alphabetical Refe rence Parameter ref erence FXOT S T A s in gle va l ue between 1 and 24, or a ra nge of values. T est mode for FXO port s. RXAB TEST TRCNTRL TRST A T TXAB FXSCFG A single value between 1 and 24, or a ra nge of values. FXS por t configurat ion, incl uding stat e, mo d e, a nd t y pe. LOOP MODE RNGBK R TLP [...]

A-4 Zhone Tech nologies Model No. Running Head Parameter reference Alphabeti cal Reference A.1.2 Alphabetic refer ence This sect ion conta ins an al phabetic reference t o all CLI pa ramete rs. PMTOT A single value between 1 and 24, or a ra nge of values. T o tal sta tistic s for t he T1 interf aces. ALL TOT BES ES LOFC SES SLI P UA SYSTEM 1 S ys[...]

Zhone Technologies / A- 5 Alphabetical Refe rence Parameter ref erence ALLCUR Displays ES, BES, UAS, SES, SLIP , and LOFC erro rs for t he current 15 minute inter val. Configurat ion gr oup: PMCUR Syntax: GET PMCUR:ALLCUR:x ALLFARCUR Displays ES, BES, UAS, SES, SLIP , and LOFC erro rs for t he current 15 minute inter val. Configurat ion gr oup: F A[...]

A-6 Zhone Tech nologies Model No. Running Head Parameter reference Alphabeti cal Reference Syntax: GET PMTOT:ALLTOT:x BERT Activate s a bit err or rate tes t (BER T) on a T1 l ine. The BER test sends a da ta pattern a nd mea sures the bi t err or rate on t he sel ec ted time slot. Possi ble v alue s are: • OFF (defau lt): te rminates the BER te[...]

Zhone Technologies / A- 7 Alphabetical Refe rence Parameter ref erence CLKSRC Clocking s ource for T1 line. Possibl e values a re: • W AN1: Clo ck f or the T1 inter fac e deri ved fr om th e lin e rece iv e si gnal. • W AN2 • INTERNAL: Clocki ng received from internal 1.544Mhz S tratum 4 c lock. If the ext er nal clock fail s, the u nit s w i[...]

A-8 Zhone Tech nologies Model No. Running Head Parameter reference Alphabeti cal Reference Specify a value from 0 t o 100ms in mult iples of 10. Configurat ion gr oup: DPCFG Syntax: (GET/SET) DPCFG:CTSD ELAY:1:(0-100) CUR Curr ent T 1 near-en d st at isti cs. P os sib le val u es ar e: • ES (err ored sec onds): indica tes the total number of se[...]

Zhone Technologies / A- 9 Alphabetical Refe rence Parameter ref erence DSR The Data Set Ready (DSR) o ption allows y ou to define wh ether the V .35 port DSR control lead shou ld be held on (high) or of f (low). Poss ible v alues are : • ON: • OFF (defau lt): Configurat ion gr oup: DPCFG Syntax: (GET/SET) DPCFG:DSR: 1:(ON/OFF) ERRINS Spec ifies[...]

A-10 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference • W AN 2 does not support FDL. Configurat ion gr oup: T1CFG Syntax: (GET/SET) T1CFG:FDL: X:(ANSI/ATT/OFF) FDL_IP Specifi es whether the FDL over IP management interf ace is en abled. FDL is a 4 Kbps channel normally used to manag e the T1 link. Whe n the [...]

Zhone Techn ologies / A-11 Alphabetical Refe rence Parameter ref erence Notes • If you ar e connecting to Premisy s IMACS on DS0 mgmt chan nel (time slot 24), set HDLC to HDR_OFF . • HDR_ON is compat ible with the Cisco impl ementation of HDLC headers. • Note that DS0 i s only val id on W AN 1. Configurat ion gr oup: T1CFG Syntax: (GET/SET) T[...]

A-12 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference LINELEN Specifi es the CSU line build out o r the DSX li ne length. For a CSU, possi ble valu es are: • 00 (0dB ) • N75 ( -7.5dB ) • N15 ( -15.0d B ) • N22 (-22.0d B) For a DSX, poss ible values are: • D0 (0-132 f eet) • 133 (133- 265 feet) • [...]

Zhone Techn ologies / A-13 Alphabetical Refe rence Parameter ref erence • ANLG: during a digi tal l oop back, t he inco ming digi tal DS0 si gnal i s sent back t o the far end witho ut decodin g it. Configurat ion gr oup: FXOCFG Syntax: (GET/SET) FXOCFG:LOO P:n:(OFF, DGTL, ANLG) LOOP (FXS) Loopback fo r the FXS por t. Possibl e values are: • OF[...]

A-14 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference MASK Syst em ne twor k mas k. Configurat ion gr oup: CPUCFG Syntax: (GET/SET) CFG:MASK:1 :(net mask) MASKFDL Network mask used fo r IP over FDL traff ic. Configurat ion gr oup: CPUCFG Syntax: (GET/SET) CPUCFG:MAS KFDL:1:(net mask) MASKHDL Network mask used [...]

Zhone Techn ologies / A-15 Alphabetical Refe rence Parameter ref erence MODE (FXS) FXS supervi sion mode. The Mod e setting sh ould be deter mined by the typ e of equip ment to which you are connecting to the port. All opt ions use two- wire balanced co nnections . Possible valu es ar e: • FXS (defau lt): For eign exchange s ubscribe r . This opt[...]

A-16 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference NCHAN Spec ifies the nu mbe r of ti me slo ts o nto whi ch da ta fr om th e T1 li ne wi ll be m appe d. No te tha t starti ng time sl ots must also be select ed for each da ta port. Channels must be contig uous. Possible values are f rom 1 to 24. Th e defau[...]

Zhone Techn ologies / A-17 Alphabetical Refe rence Parameter ref erence RLSD The Receive Level Sign al Detect (RLSD) option al lows you to define whe ther the RLS D cont rol lea d is he ld ON (hig h) or O FF (l o w). Poss ible v alues are : • ON: • OFF (defau lt): Configurat ion gr oup: DPCFG Syntax: (GET/SET) DPCFG:RLSD :1:(ON/OFF) RNGBK Speci[...]

A-18 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference RTLP (FXS) The R TLP setting cont rols the amount of gain or loss ad ded to the incoming si gnal after it is decoded t o analog. T o incre ase the s ignal level , set the R TLP setting t o a positi ve value (t he lar g e r t he num be r , the m ore ga in is[...]

Zhone Techn ologies / A-19 Alphabetical Refe rence Parameter ref erence SCHAN Spec ifies the f ir st T 1 t ime s lot tha t da ta fro m the da ta por t will be ma pped . Configurat ion gr oup: DPCFG Syntax: (GET/SET) DPCFG:SCHA N:1:(1-24) SES SES (sever ely err ored seco nd): indica tes the total numbe r of sec onds in which the bit error r ate exce[...]

A-20 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference STATE (T1 drop and ins ert) S tate of T1 dr op and inse rt ports. Pos sible val ues are: • ACTV • STDBY Configurat ion gr oup: T1CFG Syntax: (GET/SET) T1CFG:STAT E:1:(ACTV/STDBY) ST ATE ( FXO ) S tate of FXO port s. Possibl e values ar e: • ACTV • S[...]

Zhone Techn ologies / A-21 Alphabetical Refe rence Parameter ref erence SYSCONTACT System cont act info rmation. Enter a strin g of up to 25 cha racters . Note that spa ces are no t allowed. Configurat ion gr oup: SYSTEM Syntax: (GET/SET) SYSTEM:SYS CONTACT:(String) SYSDESCR System descr iption informat ion. Enter a strin g of up to 25 charac ters.[...]

A-22 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference • OFF (defau lt) • ON Configurat ion gr oup: FXOCFG Syntax: (GET/SET) FXOTST:TES T:n:(ON/OFF) TEST (FXS) T est sh ows if the po rt is in the test m ode. P ossib le v a lues a re: • OFF (defau lt) • ON Configurat ion gr oup: FXSTST Syntax: (GET/SET) [...]

Zhone Techn ologies / A-23 Alphabetical Refe rence Parameter ref erence • LOOP: T ip and Ring le ads are tie d together . • OPE N : Ring lea d is no t con ne cte d to ei th er th e T ip or to g round . • RING_GND: the Ri ng lead is gr ounded. Configurat ion gr oup: FXOCFG TRCNTRL (FXS) The T ip and Ri ng Control s pecifies t he tip and r ing [...]

A-24 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference • OFF • ON (defaul t) Configurat ion gr oup: FXSCFG Syntax: (GET/SET) FXSCFG:TRN KC:n:(OFF, ON) TRSTAT (FXO) The T ip and Ring S tatus info rmation field describe s what the a ttached device is doing with the T ip and Ri ng leads of the FXO port. Poss i[...]

Zhone Techn ologies / A-25 Alphabetical Refe rence Parameter ref erence Figure 5- 4 illustrat es how to determ ine the TS value if you want to use t he first four t ime slots for drop and inser t ( 0000000f ). Figur e 5-4.Time slot assignment for dr op and insert Configurat ion gr oup: T1CFG Syntax: (GET/SET) FXSCFG:TS: n:(00000000-ffffffff) TS ( F[...]

A-26 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference Syntax: (GET/SET) FXSCFG:TS: n:(1-24) See also: W AN (FXS) TSBERTOFF De-a ctiva tes a B ER te st on the s p ecif ie d ch a nne l. Poss ible v alues are : • 1-24 Configurat ion gr oup: T1CFG See also: BER T , P A TTERN Syntax: (GET/SET) T1CFG:TSBE RTOFF:X:[...]

Zhone Techn ologies / A-27 Alphabetical Refe rence Parameter ref erence level, s et the TTLP s etting to a positive val ue (the more po sitive t he number , the more th e signal l evel is decreased). Fo r example, a n incoming sign al at -5 d Bm can be incr eased to - 2 dBm by setti ng the TTLP to - 3 dB. The TTLP range i s -9.0dB to 3.0dB. Th e de[...]

A-28 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference • LPFD (Loop start-for ward disco nnect): Prov ides disc onnect when FXS is connec ted to voice mes saging sys tem. • GS (Gr oun d star t): Used with two-way PBX trunks. • GSA (G roun d st a rt au to mati c): Used with equipme nt requir ing fast respo[...]

Zhone Techn ologies / A-29 Alphabetical Refe rence Parameter ref erence TYPE T ype of T1 i n terf ace. Possi ble va lue s a re: • DSX: Z-Plex presents DSX characteri stics. • CSU: (defa ult) Z-Pl ex presen ts CSU characte ristic s. Configurat ion gr oup: T1CFG Syntax: (GE T/SET) T1CFG:TYPE:X:(CSU/DSX ) UAS UAS (unavail able sec ond): indi cates[...]

A-30 Zhone Technologies Model No. Running Head Command reference Alphabetical Referenc e WAN (FXS) The T1 W AN interfa ce used to provide FXS ser vice. The de fault is W AN 1. Configurat ion gr oup: FXSCFG Syntax: (GET/SET) FXSCFG:WAN :n:(1/2) See also: TS (FXS) A.2 Command r efer ence This sectio n pro vide s a refe renc e for th e Z-P lex C LI [...]

Zhone Techn ologies / A-31 Alphabetical Refe rence Error messages QUERYHALARM Displays a list of hi story alar ms. REBOOT Rebo ots th e sy s tem. TFTPDLD This command initiates a TFTP download. It prompts for the IP addres s of the se rver , the code bank to down load the im age to, and the filename o f the softwar e image. A.3 Err or messages T ab[...]

A-32 Zhone Technologies Model No. Running Head Error message s Alphabetical Reference Loopback typ e mismatch User tr ied to deact ivate a l ine loopb ack while l ocal loop back is active. NCHAN set to 0 pl ease configure the numbers of channels User trie d to confi gure the sta rting channe ls (SCHAN) with out configuri ng number of cha nnels (N[...]

Zhone Techn ologies / A-33 Alphabetical Refe rence CLI referenc e A . 4 C L I re f e re n c e The basic CLI commands ar e divided int o the followi ng categori es: • Basi c co nt rol comma nds • Movement and s earching commands • Insert and change commands • Dele te com m and s • Put and un do commands The foll owing secti ons describe th[...]

A-34 Zhone Technologies Model No. Running Head CLI reference Alphabetical Referenc e A.4.2 Movemen t and sear ch commands T able A-5 descr ibes the movement and sear ch commands. T able A-5. Movement and search commands Command Descript ion n G Go to command n . / string Search for th e specifi ed string ba ckward in t he histor y buf fer . ? str[...]

Zhone Techn ologies / A-35 Alphabetical Refe rence CLI referenc e A.4. 3 Inse rt and ch ange co mmands T able A-6 descr ibes the ins ert and ch ange commands. 0 Move curso r to the b eginning of t he line. ^ Move curso r to the fi rst non-bl ank charact er . f c Search forward fo r the char acter c . F c Search backward for the char acter c . T abl[...]

A-36 Zhone Technologies Model No. Running Head CLI reference Alphabetical Referenc e A.4.4 Delete c ommands T able A-7 descr ibes the del ete commands. A.4.5 Put and undo comman ds T able A-7 descr ibes the put and undo commands . n r c R eplace following n charact ers with c. ~ T oggle cas e, lower to upper , or upper to lower . T able A- 7. Del[...]

Zhone Techn ologies / A-37 Alphabetical Refe rence CLI referenc e u Undo last command. T able A-8. Put and undo commands (Continued) Command Descript ion[...]

A-38 Zhone Technologies Model No. Running Head CLI reference Alphabetical Referenc e[...]

Zhone Technologi es / Index -1 Index A AC po w er, i nsta l lati on 3-5 access ing th e serial por t 4-5 acces sor ie s, de scri b ed 2-3 ACTIVEBANK1 command A-30 ACTIVEBANK2 command A-30 admi nist ra tiv e user s login a ccess 4-4 alar m LED 5-9 alar ms des crib ed 3- 5 ALLCUR paramete r A-5 ALLFARCUR paramete r A-5 ALLFARINT parame ter A-5 ALLFAR[...]

Index- 2 / Zhone Technolog ies D data por t defini ng drop and ins ert chann els A-24 data p ort l o opb a ck 5-4 activa ting 5-5 diagnos ing 5-4 DATE command A-30 DC po w er, i nsta l lati on 3-5 defau lt MT U 4-6 defau lt pa sswo rd 4-4 defau lt us ern a me 4- 4 des ktop placin g unit on 2-6 DPCFG A-2 Drop and i nsert defini ng channel s A-24 DS0[...]

Zhone Technologi es / Index -3 L latchi ng loo pbac k detec tion 5-1 LED Eth ernet 5-10 LED indica tors 5-9 Eth ernet 5-10 T1 5-10 WAN 5-3 LED s des crib ed 5- 9 Eth ernet 5-10 Powe r 5- 10 line l oopbacks 5-1 LINELEN para meter A-12 local loo pbacks 5-1 local manag ement channel 4-5 LOFC pa ram eter A-12 logging in 4-4 defau lt pa sswo rd 4-4 defa[...]

Index- 4 / Zhone Technolog ies read co mmunity st rings 4-6 SNMP tr ap re c ipien ts specif ying 4-6 SNM P trap s alar ms 4-6 enabl ing 4-6 spec ificat ions cabli ng 3-7 powe r 1-4, 3-4 temp eratu re 2-3 Z Pl ex 1-4 STATE (FXO) par ameter A-20 STATE (FXS) pa rameter A-20 STATE (T1 drop and in sert) param eter A-20 STATE (T1 ) parameter A-20 STATE ([...]

Zhone Technologi es / Index -5 WAN LED green bli nking 5-3 WAN parame ter A-29 Y yell o w alar ms 4-6 Z Z Pl ex bene fits 1-2 featu res 1-2 management of 1-3 ove rview 1-1 power re quirements 3-4 spec ificat ions 1-4[...]