Axis Communications P5522 Bedienungsanleitung

AXIS P5522 PTZ Dome Network Camera User Manual[...]

About this document This manual is intended for administrators and users of the AXIS P5522 PTZ Dome Network Camera, and is applicable to rmware 5.50 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-bas[...]

The power supply used with this product shall fulll the requirements for Safety Extra Low V oltage (SEL V) and Limited P ower Source (LPS) according to IEC/EN/UL 60950-1. Battery The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RT C). Under normal conditions this battery will last for [...]

AXIS P5522 PTZ Dome Network Camera T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Other Message Levels . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

AXIS P5522 PTZ Dome Network Camera T able of Contents Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Reset to Factory Default Settings . . . . . . . . . . .[...]

AXIS P5522 PTZ Dome Network Camera Safety Infor mation Safety Infor mation Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury . CAUTION Indicates a hazardous situation which, if not[...]

AXIS P5522 PTZ Dome Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 6 7 1 P art number (P/N) & Serial number (S/N) 2 Network connector (High P oE) 3 Multi-connector 4 Control button 5 SD memory card slot 6 Status LED indicator 7 Restart button 7[...]

AXIS P5522 PTZ Dome Network Camera Hardware Overview 2 3 4 5 1 1 Screws 2 Dome ring 3 Dome cover 4 T op cover 5 Sealing ring Connectors and Buttons For technical specications, see page 63 . Network Connector RJ45 with High P ower over Ethernet (High P oE). NO NO NO TICE TICE TICE Use the supplied midspan. NO NO NO TICE TICE TICE The product shal[...]

AXIS P5522 PTZ Dome Network Camera Hardware Overview When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s NEMA/IP rating. For more information, see Multi-Connector Cable (sold separately) on page 57 . SD Card Slot NO NO NO TICE TICE TICE • Risk of damage to SD card. Do [...]

AXIS P5522 PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS X ® and • Chrome TM or Firefox ®[...]

AXIS P5522 PTZ Dome Network Camera Access the Product Set the Root P assword To access the Axis product, you must set the password for the default administrator user root . This is done in the Congure Root P assword dialog, which opens when the product is accessed for the rst time. To prevent network eavesdropping, the root password can be se[...]

AXIS P5522 PTZ Dome Network Camera Access the Product The Manual T rigger button is used to trigger an action rule from the Live View page. For information about how to congure and enable the button, see Manual Trigger on page 12 . Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the AXIS Media[...]

AXIS P5522 PTZ Dome Network Camera Access the Product Click the View Full Screen button and the video image will ll the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view . The Record button is used to record the current video stream on your computer . The location where the recording is saved can be specied[...]

AXIS P5522 PTZ Dome Network Camera Access the Product P an and Tilt bars – Use the arrows to pan and tilt the camera view , or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position. Focus bar – Click on a position on th[...]

AXIS P5522 PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of available s[...]

AXIS P5522 PTZ Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control Panel from: • Windows C[...]

AXIS P5522 PTZ Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Access Audio Streams The Live [...]

AXIS P5522 PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to al[...]

AXIS P5522 PTZ Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 19 . • Stream proles. See page 20 . • Camera settings. See page 2 1 . • Overlay image. See page 22 . • Privacy mask. See p[...]

AXIS P5522 PTZ Dome Network Camera Video and Audio • Maximum frame rate . T o avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a xed amount. Alternatively , the frame rate can be set as Unlimited , which means the Axis product always delivers the highest frame rate possible under the current conditions. • Ove[...]

AXIS P5522 PTZ Dome Network Camera Video and Audio For quick setup, use one of the predened stream proles. Each predened prole has a descriptive name, indicating its purpose. If required, the predened stream proles can be modied and new customized stream proles can be created. To create a new prole or modify an existing p[...]

AXIS P5522 PTZ Dome Network Camera Video and Audio Iris - A larger F-value means less light sensitivity , but a larger depth of eld. Gain - Measured in decibels (dB), gain describes the amount of amplication applied to a signal, in this case the visual information in the image. A high level of amplication may provide a better image in very[...]

AXIS P5522 PTZ Dome Network Camera Video and Audio Overlay Image An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is used to provide extra information or to mask a part of the image. Since it is static, the position and size of an overlay image will remain the same regardless of resolutio[...]

AXIS P5522 PTZ Dome Network Camera Video and Audio 1. Go to Video & Audio > Video Stream and select the Image tab . 2. Under Overlay Settings , select Include text . 3. Enter the modier #D and, optionally , additional text which will be displayed also when the action rule is not active. Create the action rule: 1. Go to Events > Action [...]

AXIS P5522 PTZ Dome Network Camera Video and Audio Full duplex - Simultaneous two-way audio allowing the Axis product to transmit and receive audio at the same time. There is no echo cancellation; if feedback loops appear , try moving the microphone or the speaker . Half-duplex - Audio can be transmitted to and from the Axis product but only in one[...]

AXIS P5522 PTZ Dome Network Camera Video and Audio • G726 is an unlicensed speech codec that is most commonly used within the security industry . Note If recording audio to edge storage, such as an SD card or network share, use AAC encoding. The Sample rate denes the number of times per second the sound is sampled. A higher sample rate will pr[...]

AXIS P5522 PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 20 . • Default Viewer for Browser . See page 27 . • Viewer Settings. Se[...]

AXIS P5522 PTZ Dome Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are [...]

AXIS P5522 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position. A preset position consists of the following values: • P an and tilt positions • Zoom position • Focus position (manual or automatic) • Iris posit[...]

AXIS P5522 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) It is also possible to, for example, record video or save images (take a snapshot) while the Gatekeeper is active. Go to Events and set up an action rule with PTZ Preset Reached as trigger . Guard T our A guard tour displays the video stream from different preset positions, one-by-one, in a pre[...]

AXIS P5522 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) x Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed. When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view mov[...]

AXIS P5522 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement. Control Queue Note • The administrator can enable and disable PTZ controls for selected users. • To identi[...]

AXIS P5522 PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement starts or stops in the camera view . Motion detection is congured by dening up to 1 0 Include and Exclude windows: • Include windows — dene areas where motion should be detected • Exclude windows —[...]

AXIS P5522 PTZ Dome Network Camera Detectors Medium level (50%) A large difference in luminance is required to trigger motion detection. Low level (0%) Even very small objects trigger motion detection. An object that appears in the window triggers motion detection only for a very short time before it is considered as non-moving. Only very bright ob[...]

AXIS P5522 PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications,[...]

AXIS P5522 PTZ Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 36[...]

AXIS P5522 PTZ Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an action[...]

AXIS P5522 PTZ Dome Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 35 . • Detectors - Audio Detection – T rigger the rule when audio is detected. See Audio Detection on [...]

AXIS P5522 PTZ Dome Network Camera Events • Play Audio Clip – See Audio Clips on page 26 . • PTZ Control - Preset P osition – Go to a preset position. - Guard T our – Start a guard tour . See Guard T our on page 30 . • Record Video – Record video and audio to a selected storage. T o record audio, use AAC audio encoding and make sure t[...]

AXIS P5522 PTZ Dome Network Camera Events HTTPS Send Images Send Notication Send Video Clip Encrypted le transfer using HyperText Transfer Protocol Secure (HTTPS). Specify login information for the HTTPS server and validate the server’s certicate. If there is a proxy between the Axis product and the HTTPS server , also specify the proxy [...]

AXIS P5522 PTZ Dome Network Camera Events Set Up Recurrences Recurrences are used to trigger action rules repeatedly , for example every 5 minutes or every hour . To set up a recurrence: 1. Go to Events > Recurrences and click Add . 2. Enter a descriptive name and recurrence pattern. 3. Click OK . To use the recurrence in an action rule, rst [...]

AXIS P5522 PTZ Dome Network Camera Recordings Recordings • To access recordings, see Recording List on page 42 . • To congure camera controlled storage, see Storage on page 52 . Recording List Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that trigge[...]

AXIS P5522 PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language butto[...]

AXIS P5522 PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybod[...]

AXIS P5522 PTZ Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the des[...]

AXIS P5522 PTZ Dome Network Camera System Options A Server/Client certicate can be self-signed or issued by a Certicate Authority (CA). A self-signed certicate offers limited protection and can be used before a CA-issued certicate has been obtained. To install a self-signed certicate: 1. Go to Setup > System Options > Security [...]

AXIS P5522 PTZ Dome Network Camera System Options Network Basic T CP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled. IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP addre[...]

AXIS P5522 PTZ Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart the product by disconnecting and reconnecting pow[...]

AXIS P5522 PTZ Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the rst part of a fully qualied domain name, for example, myserver is the host name in the fully qualied domain name myserver.myco[...]

AXIS P5522 PTZ Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router . The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NAT router , Network router , Internet Gateway , Broadband router , Broadband sharing device, or a software suc[...]

AXIS P5522 PTZ Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP . Community names are used to identify groups. To enable and congure SNMP in the Axis product, go to the System Options >[...]

AXIS P5522 PTZ Dome Network Camera System Options Storage SD Card NO NO NO TICE TICE TICE To prevent data corruption, the SD card should always be unmounted before it is ejected. Note For SD card recommendations see www .axis.com The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card[...]

AXIS P5522 PTZ Dome Network Camera System Options 1. Insert the SD card in the SD card slot. 2. Open the Axis product’s webpages and go to Setup > System Options > Storage . 3. Click SD Card . 4. Click Format and select the desired le system. 5. Click OK to start formatting the card. Network Share Network share allows you to add network [...]

AXIS P5522 PTZ Dome Network Camera System Options Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. Note A restart clears all entries in the Server Report. Click Restore to reset most settings to the factory default values. The following settings are not aff[...]

AXIS P5522 PTZ Dome Network Camera System Options Crash Report - Generates an archive with debugging information. The report takes several minutes to generate. The log levels for the System Log and the Access Log are set under System Options > Support > Logs & Reports > Conguration . The Access Log can be congured to list all con[...]

AXIS P5522 PTZ Dome Network Camera System Options 4. Using the installation and management software tools, assign an IP address, set the password and access the video stream It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance . 56[...]

AXIS P5522 PTZ Dome Network Camera Multi-Connector Cable (sold separately) Multi-Connector Cable (sold separately) When connecting external equipment to the Axis product, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP rating. The multi-connector cable can be purchased from your Axis reseller . Conn[...]

AXIS P5522 PTZ Dome Network Camera Multi-Connector Cable (sold separately) B I/O congured as output I/O connector 1 2 3 4 5 6 DC power input AC power input 58[...]

AXIS P5522 PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. [...]

AXIS P5522 PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, P ossible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try th[...]

AXIS P5522 PTZ Dome Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the client[...]

AXIS P5522 PTZ Dome Network Camera Troubleshooting No audio Incorrect setup Check the sound card in the computer . Ensure that mute is not selected and that the volume settings are correct. Check that Enable audio support is selected under Setup > System Options > Security > Audio Support . Check that the correct Audio Input source is sele[...]

AXIS P5522 PTZ Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P5522 50 Hz AXIS P5522 60 Hz Image sensor 1/4'‘ ExView HAD progressive scan CCD Lens Varifocal f=4.1 – 73.8 mm F1.4 – 3.0 Autofocus Automatic day and night functionality Horizontal angle of view: 47.0°[...]

AXIS P5522 PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Security P assword protection, IP address ltering, HTTPS encryption*, IEEE 802.1X network access control*, digest authentication, user access log *This product includes software developed by the Open SSL Project for use in the Open SSL T oolkit ( ww[...]

AXIS P5522 PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Approvals EN 55022 Class A, EN 6 1 000–3–2, EN 6 1 000–3–3, EN 6 1 000–6–1, EN 6 1 000–6–2, EN 55024 FCC P art 15 Subpart B Class A ICES-003 Class A VCCI Class A C-tick AS/NZS CISPR 22 KCC Class A EN 60950–1 (IEC 60950–1) IEC 60529 [...]

User Manual V er . M5.2 AXIS P5522 PTZ Dome Network Camera Date: January 20 15 © Axis Communications AB, 20 15 P art No. 619 14[...]