Bosch F.01U.001.830 Bedienungsanleitung

wireless Local SecurityNetwork EN Reference Guide wLSN[...]

wLSN | Reference Guide | Trademarks 2 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Trademarks Pet Friendly® is a regis tered trad emark of Bosch Security Systems in the United States.[...]

wLSN | Reference Guide | Contents Bosch Security Systems, Inc. | 3/07 | F01U009440-01 3 Contents 1.0 Using this Document ..........................................................7 2.0 General Installation ............................................................9 2.1 Installation Co nsid erat ions ...............................................[...]

wLSN | Reference Guide | Contents 4 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 9.0 wLSN Inertia Detector ............................................. 36 9.1 Sensitivity Se tting s .................................................................. 37 9.2 Test Mode ............................................................................[...]

wLSN | Reference Guide | Figures Bosch Security Systems, Inc. | 3/07 | F01U009440-01 5 Figures Figure 1: Device Ta mper Swit ches .................................................. 13 Figure 2: wLSN Installa t ion Tool ...................................................... 22 Figure 3: Switches ......................................................[...]

wLSN | Reference Guide | Tables 6 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Tables Table 1: wLSN Products a n d Instru ctions......................................... 8 Table 2: General Specif icat io ns ........................................................ 9 Table 3: LED Flash Pat terns in RF SS Mode ..................................[...]

wLSN | Reference Guide | 1.0 Using this Document Bosch Security Systems, Inc. | 3/07 | F01U009440-01 7 1.0 Using this Document This document contains the ba sic information that a trained installer needs to insta ll the wireless Local SecurityNetw ork (wLSN). It supplements the docume nts listed in Table 1 on page 8. This reference guide contains: [...]

wLSN | Reference Guide | 1.0 Using this Document 8 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Table 1: wLSN Products a nd Instructions Product Document Part Number ISW-BIT1-HA X ISW-BIT1 -HBX ISW-BIT1-HCX wLSN Installation T ool Installation Instructions F01U008748 ISW-BH B1-WX A ISW-BH B1-WX B ISW-BH B1-WX C wLSN Hub Installati on Instruc[...]

wLSN | Reference Guide | 2.0 General Installation Bosch Security Systems, Inc. | 3/07 | F01U009440-01 9 2.0 G eneral Installation 2.1 Installation Considerations • wLSN devices are intended only for indoor, dry applications. • Mount wLSN devices on flat, rigid surfaces. Some devices can be optionally corner mounted as indicated in the install a[...]

wLSN | Reference Guide | 2.0 General Installation 10 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 2.3 Installation Procedure When installing a wLSN Network, you must plan your installa tion based on the control panel and wLSN specifications, and the radio-frequency signal strength (RFSS) between remote devices and the wLSN Hub. The wLSN inst[...]

wLSN | Reference Guide | 2.0 General Installation Bosch Security Systems, Inc. | 3/07 | F01U009440-01 11 2.4 Site Testing (RFSS Mode) Before permanently installing an y wLSN device, verify that the radio-frequency signal strengt h (RFSS) between the planned device locatio n and the planned wLSN Hub location is acceptable. CAUTION: If you have wirel[...]

wLSN | Reference Guide | 2.0 General Installation 12 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 You must test the devices at the same EN50 131 Security Grade at which the control panel discovers the devices. 4. Find a suitable location for th e hub base and apply power by either connecting it to the cont rol panel (refer to the contr ol pa[...]

wLSN | Reference Guide | 2.0 General Installation Bosch Security Systems, Inc. | 3/07 | F01U009440-01 13 Figure 1: Device Tamper Switches 1 2 1- Button style tamper switch 2- Lever style tamper switch 3. Hold the device at the pl anned mounting location. 4. Determine if the RF signal strength is acceptable by observing the device’s LED flash patt[...]

wLSN | Reference Guide | 2.0 General Installation 14 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Reset the wLSN Hub’s DIP switches to their original settings to exit RFSS m ode. Refer to Section 2.4.1 Preparing the wLSN Hub for Site Test ing and RFSS Mode on page 11. To cause a device to exit RFSS mode, remove the device's batteries [...]

wLSN | Reference Guide | 2.0 General Installation Bosch Security Systems, Inc. | 3/07 | F01U009440-01 15 4. Hold th e Installation Tool at the device’s planned mounting location. Use Mode 1 to determine if the signal strength is acceptable or not. Modes 2 and 3 help you determine how a cceptable the signal strength is. Us e Modes 2 and 3 to place[...]

wLSN | Reference Guide | 2.0 General Installation 16 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Mode 2 Select Mode 2 by pressing [2]. The Mode 2 display shows power ba rs on the left and PACKETS = X on the right. The bars indicate the signal stren gth. More solid bars indicate a strong er signal. The Installation Tool shows the number of p[...]

wLSN | Reference Guide | 2.0 General Installation Bosch Security Systems, Inc. | 3/07 | F01U009440-01 17 Mode 3 Select Mode 3 by pressing [3]. MOD y 3: S Ex x d B m x Nx xd B m x SN R y The Mode 3 display shows the sign a l to noise ratio (SNR) at the location you are testing. Signal refe rs to the signal strength of the incoming message from the w[...]

wLSN | Reference Guide | 2.0 General Installation 18 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 2.5 Defaulting a wLSN Device (Undiscovered State) Discovery is the process through which the wLSN Hub identifies and includes new devices into a system. Only undiscovered devices can be placed in RFSS mode. To ensure a device is undiscovered: 1.[...]

wLSN | Reference Guide | 2.0 General Installation Bosch Security Systems, Inc. | 3/07 | F01U009440-01 19 2.6 Battery Requirements Dispose of used batteries according to manufacturer’s instructions . When you insert batterie s into a wireless device, the LED tur ns on for approximately five sec to indi cate that battery strength is sufficient. If [...]

wLSN | Reference Guide | 2.0 General Installation 20 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Refer to Table 5 for the battery requirements for each wLSN device. Table 5: Battery Requirements wLSN Device Battery Si ze Battery Type Cell Voltage Quantity (Cells) Installati on Tool AAA NiMH- Rechargeab le 1.2 V 3 Hub None PIR Motion Detecto[...]

wLSN | Reference Guide | 3.0 wLSN Installation Tool Bosch Security Systems, Inc. | 3/07 | F01U009440-01 21 3.0 wL SN Installation T ool (ISW-BIT1-HAX, ISW-BIT1-HBX, ISW-BIT1-HCX) Use the wLSN Installation Tool to determine the be st locations for wLSN device installation. Features include: • The ability to communicate si gnal strength levels, noi[...]

wLSN | Reference Guide | 3.0 wLSN Installation Tool 22 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Figure 2: wLSN Installation Tool BOSCH 1 2 1- Power Indicator 2- Charging Status LED[...]

wLSN | Reference Guide | 4.0 wLSN Hub Bosch Security Systems, Inc. | 3/07 | F01U009440-01 23 4.0 wL SN Hub (ISW-BHB1-WXA, ISW-BHB1-WXB, ISW-BHB1-WXC) The wLSN Hub monitors and coor dinates two-way communic ations between the control panel and the detectors. Features inclu de: • Three switches, S1, S2 and S3, for configuring device operation and e[...]

wLSN | Reference Guide | 4.0 wLSN Hub 24 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 4.1 wLSN Hub Switches Use Switches S1, S2, and S3 lo cated on the wLSN Hub’s inner cover to configure the device’s operation or to enable special diagnostic or installation modes. Figure 3: Switches 0 5 0 5 0 5 S 1 S2 S3 Assign a different address to ea[...]

wLSN | Reference Guide | 4.0 wLSN Hub Bosch Security Systems, Inc. | 3/07 | F01U009440-01 25 4.2 wLSN Hub LED The green LED shows the device’s status during power up, self test, network configur ation, and normal oper ation ( Table 9 ). Figure 4: wLSN Hub LED 1 1 - LED Table 9: wLSN Hub LED Displ a ys Operatio n LED (Device S tatus) Self Test and[...]

wLSN | Reference Guide | 5.0 wLSN PIR and Dual Motion Detectors 26 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 5.0 wL SN PIR and Dual Motion Detect ors (ISW-BPR1-W13PX, ISW-BDL1- W11PGX, ISW-BDL1-W11PHX, ISW-BDL1-W11PKX) The wLSN Passive Infrared (PIR) and Dual Motion Detectors almost instantly respond to hu ma n targets. The PIR Motion Det[...]

wLSN | Reference Guide | 5.0 wLSN PIR and Dual Motion Detectors Bosch Security Systems, Inc. | 3/07 | F01U009440-01 27 5.1.2 Intermediate Sensitivity Only use this setting in non-pet ins tallations where environmental disturbances are minimal. Interm ediate sensi tivity provides the highest level of detection performance. 5.1.3 Setting the Dual Mot[...]

wLSN | Reference Guide | 5.0 wLSN PIR and Dual Motion Detectors 28 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 5.2 Walk Testing To maximize battery life, the LED elements do n ot activate unless the unit is in the Walk Test m ode. Perform a Walk Test to determine the boundaries of the cover age area. Walk Test mode can be started from the: [...]

wLSN | Reference Guide | 5.0 wLSN PIR and Dual Motion Detectors Bosch Security Systems, Inc. | 3/07 | F01U009440-01 29 Table 11: Walk Test LED Indications Detector LED Color Function Red – fa st flas h Power-up (Walk Test disabled) PIR Red – lights for 4 sec Alarm, motion dete cted Flashes Green to Yel low to Red Power-up (Walk Test disabled) G[...]

wLSN | Reference Guide | 6.0 wLSN Door-Window Contact 30 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 6.0 wL SN Door-Windo w Contact (ISW-BMC1-S135X) The wLSN Door-Window Contact is a magne tic reed switch and wireless transceiver used for mo nitoring doors, windows, and other dry contact devices. Features include: • An internal reed switc[...]

wLSN | Reference Guide | 6.0 wLSN Door-Window Contact Bosch Security Systems, Inc. | 3/07 | F01U009440-01 31 6.1 Supported Wiring Configurations For all wiring options, refer to your con trol panel’s documentation to ide ntify the compatible end-of-line (EOL ) resistor options. 6.1.1 Single 1 k Ω , 2.2 k Ω , or 3.65 k Ω EOL Resistor Op tion Re[...]

wLSN | Reference Guide | 6.0 wLSN Door-Window Contact 32 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 6.1.2 1.5 k Ω or 2.2 k Ω EOL Resistor and Tamper Option Refer to Figure 8 . Place up to five normally-closed contacts in series with the 2.2 k Ω EOL resistor. Each contact has e ither a 1.5 k Ω or 2.2 k Ω resistor across it. No co nt[...]

wLSN | Reference Guide | 7.0 wLSN Recessed Door-Window Contact Bosch Security Systems, Inc. | 3/07 | F01U009440-01 33 7.0 wL SN Rece ssed Door-Windo w Contact (ISW-BMC1-R135X) The wLSN Recessed Door-Window (DW) Contact is a wireless transceiver used for monitoring doors and wind ows. Features include: • Recessed mounting • An internal reed swit[...]

wLSN | Reference Guide | 7.0 wLSN Recessed Door-Window Contact 34 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Refer to Figure 10 for the location of the device’s tamper switch and LED. Figure 10: Recessed Door-Window Contact Tamper Switch 1 2 1 - Tamper switch 2 - RFSS Mode and Discovery Mode LED[...]

wLSN | Reference Guide | 8.0 wLSN Mini Door-Window Contact Bosch Security Systems, Inc. | 3/07 | F01U009440-01 35 8.0 wL SN Mini Door-Window Contact (ISW-BMC1-M82X) Similar to the wLSN Door-Window (DW) Contact, the w LSN Mini Door-Window Contact is a wirele ss transceiver device used for monitoring doors and windows. Features include: • Small siz[...]

wLSN | Reference Guide | 9.0 wLSN Inertia Detector 36 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 9.0 wL SN Iner tia Detect or (ISW-BIN1-S135X) The wLSN Inertia Detector is a vi bration detector combined with a wireless transceiver used for mo nitoring doors or windows. Features include: • An internal reed switch for use with an external [...]

wLSN | Reference Guide | 9.0 wLSN Inertia Detector Bosch Security Systems, Inc. | 3/07 | F01U009440-01 37 Figure 12: Sensor Adjustment Proper sensor element orientation is critical to the operation of the device. The arrow, embossed on the bod y of this sensor, must alwa ys point up. Figure 13: Wiring Route 9.1 Sensitivity Settings All sensitivity [...]

wLSN | Reference Guide | 9.0 wLSN Inertia Detector 38 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 9.1.1 Gross Attack Sensitivity The Gross Attack setting measures vibration activity for a specified length of time. There are four settings: • Low • Low to Medium • Medium to high • High The settings determine t he length of time vibrat[...]

wLSN | Reference Guide | 10.0 wLSN Key Fob Bosch Security Systems, Inc. | 3/07 | F01U009440-01 39 10.0 wL SN K e y F ob (ISW-BKF1-H5X) The wLSN Key Fob is a two-way personal transmitter carried by the user. Use it to remotely arm or disarm a security area. Features include: • Five buttons: Two buttons are for arming and disarming. Two buttons can[...]

wLSN | Reference Guide | 10.0 wLSN Key Fob 40 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Table 16: wLSN Key Fob Specifications Power/Vo ltage Two CR2032 lithium ba tterie s, 3 VDC Gasket s Interchangeable; for mu ltiple users, different colors available EN50131-1 Security Grade 2, Environmen tal Class II 10.1 Key Fob Buttons Refer to your [...]

wLSN | Reference Guide | 11.0 wLSN Relay Module Bosch Security Systems, Inc. | 3/07 | F01U009440-01 41 11.0 wL SN Rela y Module (ISW-BRL1-WX) The wLSN Relay Module allows the c ontrol panel to switch outputs of devices wirelessly. Features include: • The ability to control external devices wirelessly through a Form C relay • The ability to sync[...]

wLSN | Reference Guide | 12.0 wLSN Siren (Indoor) 42 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 12.0 wL SN Siren (Indoor) (ISW-BSR1-WX) The wLSN Siren is a wireless soun ding device. Features include: • Ability for synchronous operation with all other wireless outputs in the wLSN system • An LED for RFSS and Discovery Modes • Seconda[...]

wLSN | Reference Guide | 13.0 wLSN Smoke Detector Bosch Security Systems, Inc. | 3/07 | F01U009440-01 43 13.0 wL SN Smok e Detect or (ISW-BSM1-SX) The wLSN Smoke Detector features include: • A visual status LED • A built-in sounder for alarm alerts Under normal conditions, the re d LED flashes once every 8 sec while the sensor monitors the su r[...]

wLSN | Reference Guide | 13.0 wLSN Smoke Detector 44 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 Figure 15: wLSN Smoke Detector 1 2 1 - High intensity LED 2 - Test/Silence Button 13.1 Battery Replacement The LED normally flashes every 8 se c. Replace batteries when the LED stops flashing and the sensor chirps every 45 sec. The low battery t[...]

wLSN | Reference Guide | 13.0 wLSN Smoke Detector Bosch Security Systems, Inc. | 3/07 | F01U009440-01 45 13.3 Sensitivity Test Test mode is seen by the con trol panel as a tes t. It does not send an alarm. The detector includes a Sens itivity Level Test mode for determining the detector’s sensit ivity: 1. Press and hold the Test/Silence button fo[...]

wLSN | Reference Guide | 13.0 wLSN Smoke Detector 46 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 13.5 LED Table 21: LED Status LED Status Flashing Flashes every 8 sec under normal op eration. On Dete cts smoke, sending an al arm Off Malfunction, rep lace the batteries, clean the dete ctor, or replace the optical chamber as required. 13.6 Cl[...]

wLSN | Reference Guide | 13.0 wLSN Smoke Detector Bosch Security Systems, Inc. | 3/07 | F01U009440-01 47 4. Squeeze the optical chamber where indicated and pull it up and away from the detector and discard ( Figure 17 ). Figure 17: Remove the Detector Cap 2 1 3 4 1 - Smoke Chamber Base 2 - Optical Chamber 3 - Alignment Arrows 4 - Detector Cap 5. Us[...]

wLSN | Reference Guide | 13.0 wLSN Smoke Detector 48 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 13.7 Returning the Smoke Detector to an Undiscovered State To return the Smoke Detector to undiscovered mode ( Figure 18 on page 49): 1. Remove the detector from the mounting base. 2. Remove the batteries. 3. Remove the housing cover by insertin[...]

wLSN | Reference Guide | 13.0 wLSN Smoke Detector Bosch Security Systems, Inc. | 3/07 | F01U009440-01 49 Figure 18: Returning the Smoke Detector to Undiscovered Mode 5 3 6 4 9 10 7 8 1 2 1 - Detector 2 - Base 3 - Notch 4 - Sounder 5 - Battery Case 6 - Transmitter PCB 7 - Housing Cover 8 - Housing Base 9 - Jumper in normal operating position 10 - Ju[...]

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector 50 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 14.0 wL SN Glassbreak Det ector (ISW-BGB1-SAX) The wLSN Glassbreak Detector is a wireless transmitter used for detecting breaking gla ss. Features include: • Monitored battery status • Four sensitivity se ttings Table 22: Glassbreak Det[...]

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector Bosch Security Systems, Inc. | 3/07 | F01U009440-01 51 Figure 19: Glassbreak Front Layou t EVENT 1 2 3 4 5 6 7 8 9 10 1 - Service door tamper switch 2 - AA batteries 3 - Service door 4 - SW4 Test Mode pads 5 - SWS sensitivity DIP switches 6 - Event LED 7 - Alarm LED 8 - LED enable switch (off p[...]

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector 52 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 14.1 Installation Considerations For the best detector performance, select a mounting location that is: • within 7.6 m (25 f t) of the protected glass. • within clear view of the protec ted glass (there is no minimum range). • at leas[...]

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector Bosch Security Systems, Inc. | 3/07 | F01U009440-01 53 14.2 Sensitivity Settings 1. If the front housing is attached, carefully open the service door ( Item 3, Figure 19 ). 2. Enable the LEDs for test purposes by sliding the LED ENABLE switch ( Item 8, Figure 19 ) in the direction the arrow poi[...]

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector 54 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 6. Observe the green event LED (Item 6, Figure 19 on page 51) for approximately 1 min. If t he green LED flashes, r elocate the unit or reduce the sensitivity by adjustin g the sensitivi ty switch. 7. Repeat Steps 3 through 6 until you achi[...]

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector Bosch Security Systems, Inc. | 3/07 | F01U009440-01 55 14.3.1 Entering Test Mode Place the detector in Test Mode. In Test Mode, the detector’s LED disable switch ( Item 8 , Figure 19 on page 51) is overridden. You can enter the Test Mode locally or remotely. To enter the Test Mode locally: 1.[...]

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector 56 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 14.3.2 Testing the Detector (Flex and Audio Signals) 1. Set the 13-332 Tester switches to the TEST and FLEX positions ( Items 1 and 3 , Figure 21 on page 54). 2. Press the red Start button ( Item 2, Figure 21 on page 54). The tester activat[...]

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector Bosch Security Systems, Inc. | 3/07 | F01U009440-01 57 14.4 Low Battery Indication The detector indicates a low ba ttery condition in two ways: • If the LEDs are enabled, both flas h simultaneously every sec. • A battery status indication is sent to the control panel. The LED flashing and a[...]

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector 58 Bosch Security Systems, Inc. | 3/07 | F01U009440-01 14.5.2 Returning the Glassbreak Detector to an Undiscovered State If the wall tamper tab is removed and you must return the detector to an undiscovered state: 1. Remove the batteries from the detector. 2. Place the detector on a flat surfac[...]

wLSN | Reference Guide | Appendix: Icons and Sy mbols Bosch Security Systems, Inc. | 3/07 | F01U009440-01 59 Appendix: Icons and Symbols Table 24: Icons and Symbols Icon or Symbol Meanin g Not Pet Friendly® ≥ 45 k g ( 10 0 l b ) Pet Frien dly (appro priate weight s below graphic) Point awa y from rotating ma chines. Point a way from obje cts t h[...]

© 2007 Bosch Security Systems, Inc. F01U009440-01 Bosch Security Systems, Inc. www.boschsecurity.com[...]