Intel DG33FB Bedienungsanleitung

Intel ® Desktop Board DG33FB Product Guide Order Numbe r: D8343 1 -0 01[...]

Revision History Revision Revision History Date -001 First rele ase of the Inte l ® Desktop Board DG33FB Product Guide April 2007 If an FCC declaration of conformity marking is present on the board, the following s tatement applies : FCC Declaration of Conformity This device co mplies with Pa rt 15 of the FC C Rules. Oper ation is subj ect to the [...]

iii Preface This Product Guide gives in formation about board layout , component installation, BIOS update, and regulatory requirements for Intel ® Desktop Board DG33FB. Intended Audience The Product Gu ide is intended for techn ically qualified personnel. It is not intended for general audiences. Use Only for Intended Applications All Intel Deskt[...]

Intel Desktop Board DG33FB Product Guide iv Terminology The table below gives descriptions of some common terms used in the product guide. Term Description GB Gigabyte (1,073,741,824 bytes) GHz Gigahertz (one billion hertz) KB Kilobyte (1024 bytes) MB Megabyte (1,048,57 6 bytes) Mbit Megabit (1,048,576 bits) MHz Megahertz (one million hertz) Box Co[...]

v Contents 1 Desktop Board Features Supported Operat ing Systems.............................................................................. 10 Desktop Board Components................................................................................. 11 Proce ssor ....................................................................................[...]

Intel Desktop Board DG33FB Product Guide vi Installing and Removing a Proc essor ..................................................................... 29 Installing a Processor .................................................................................. 29 Installing the Proce ssor Fan He at Sink ..............................................[...]

Contents vii B Regulatory Compliance Safety Regulati ons ............................................................................................. 65 Place Battery Marking ................................................................................. 65 European Union Declarati on of Conformity Statement......................................[...]

Intel Desktop Board DG33FB Product Guide viii Tables 1. Feature Summary .......................................................................................... 9 2. Desktop Board DG 33FB Compone nts ............................................................... 12 3. LAN Connec tor LEDs ..........................................................[...]

9 1 Desktop Board Features This chapter briefly describes the featu res of Intel ® Desktop Board DG33FB. Table 1 summarizes the major features of the Desktop Board. Table 1. Feature Summar y Form Factor ATX (320.04 millimeters [11.60 inches] x 243. 84 millimeters [9.60 inches]) Processor Support for an Intel ® processor in the LGA775 package Main[...]

Intel Desktop Board DG33FB Product Guide 10 Table 1. Feature Summar y (continued) BIOS • Intel ® Platform Innovation Framework for extensible firmware interf ace • 8 Mbit symmetrical flash memory device • Support for SMBIOS • Intel ® Rapid BIOS Boot • Intel ® Express BIOS Update Power Management • Support for Advanced Configuration a[...]

Desktop Board Features 11 Desktop Board Components Figure 1 shows the approximat e location of the major co mponents on Desktop Board DG33FB. Figure 1. Desktop Board DG33FB Compo nents[...]

Intel Desktop Board DG33FB Product Guide 12 Table 2. Desktop Board DG33FB Components Label Description A PCI bus connector 3 B Auxiliary chassis fan header (4-pin) C PCI Express x1 connector 3 D PCI Express x1 connector 2 E PCI bus connector 2 F Front panel audio header G PCI bus connector 1 H PCI Express x1 connector 1 I Speaker J PCI Express x16 [...]

Desktop Board Features 13 Processor CAUTION Failure to use an appropriate powe r supply and/or not connecting th e 12 V (2 x 2 pin) power connector to the Desktop Board may re sult in damage to the bo ard, or the system may not function properly. Desktop Board DG33FB supports an Inte l processor in the LGA775 package. Processors are not included wi[...]

Intel Desktop Boar d DG33FB Product Guide 14 ⎯ Memory conf igurations listed be low: • Up to 2.0 GB utilizing 256 Mb tec hnology • Up to 4.0 GB utilizing 512 Mb or 1 Gb technology • Up to 8.0 GB utilizing 1 Gb techno logy Related Links : Go to the following links o r pages for more information abo ut: • SD RAM s pec if ica t ion s, http:/[...]

Desktop Boa rd Feature s 15 • 3D Graphics Re ndering enhance ments: ⎯ 1.6 dual texture GigaPixel/s maximum fill rate ⎯ 16-bit and 32-bit color ⎯ Maximum 3D supported resol ution of 1600 x 1200 x 32 at 85 Hz ⎯ Vertex cach e • Video ⎯ Software DVD at 30 fps full scre en ⎯ Adaptive deinterlacing ⎯ Dynamic Video Memory Technology (DVM[...]

Intel Desktop Board DG33FB Product Guide 16 Audio Subsystem The onboard audio subsystem consists of the following: • Intel ICH9DH I/O controller hub • RealTek ALC888 audio codec • Back panel audio connectors • Intel High Defini tion audi o front panel audio header The audio subsystem support s the fol lowing features: • A signal-to-noise [...]

Desktop Board Features 17 RJ-45 LAN Connector LEDs Two LEDs are built into the RJ-45 LAN co nnector located on the back panel (see Figure 2). These LEDs indicate the status of the LAN. Figure 2. LAN Connector LEDs Table 3 describes the LED states when the board is powered up a nd the LAN subsystem is operating. Table 3. LAN Connector LEDs LED LED C[...]

Intel Desktop Board DG33FB Product Guide 18 Hi-Speed USB 2.0 Support The Desktop Board supports up to 12 USB 2.0 ports (six po rts routed to the back panel and six ports routed to three internal headers) via the ICH9DH. USB 2.0 ports are backward compatible with USB 1.1 devices. USB 1.1 devices will function normall y at USB 1.1 speeds. USB 2.0 sup[...]

Desktop Board Features 19 Serial ATA and IDE Auto Configuration If you install a Serial ATA or IDE device (such a s a hard drive) in yo ur computer, the auto-configuration utility i n the BIOS automaticall y detects and configures the devi ce for your computer. You do not need to run the BIOS Setup program aft er installing a Serial ATA or IDE devi[...]

Intel Desktop Board DG33FB Product Guide 20 Hardware Monitoring and Fan Speed Control The features of the hardware moni toring and fan speed co ntrol include: • Monitoring of power supply vo ltages to detect levels above and below acceptable values • Intel Quiet Syst em Technology fan speed control, deliv ering acoust ically-optimiz ed thermal [...]

Desktop Board Features 21 Hardware Support Power Connectors ATX12V-compliant power supplies can tur n off the computer power through system control. When an ACPI-enabl ed computer receives the correct command, the power supply removes all non-standby voltages. When resuming from an A C power failure, th e computer returns to the power state it was [...]

Intel Desktop Board DG33FB Product Guide 22 Instantly Available PC Technology CAUTIONS For Instantly Available PC technology, t he 5 V standby line for the power supply must be capable of delivering adequate +5 V st andby current. Failure to provide adequate standby current when using t his feature can damage the power supply and/or e ffect ACPI S3[...]

Desktop Board Features 23 Figure 3. Location of the Standby P ower Indicator Related Links: For more information on standby current requ irements for the Desktop Board, refer to the Technical P roduct Specification by going to the follow ing link, f inding the product , and selecting Product D ocumentation from the left-hand menu: http://support.i [...]

Intel Desktop Board DG33FB Product Guide 24 ENERGY STAR* Qualified In 2007, the US Department of Energy and the US Environmental Protection Agency revised the ENERGY STAR requirements. Intel worked directly with these two governmental agencies to define t he ne w requirements. Currently Intel Desk top Boards meet the new ENERGY STAR requirements. F[...]

25 2 Installing and Replacing Desktop Board Components This chapter tel ls you how to: • Install the I/O sh ield • Install and remove the Desktop Board • Install and remove a processor • Install and remove memory • Install and remove a PCI Express x16 card • Connet the diskette drive cable • Connect the IDE and Se rial ATA cables • [...]

Intel Desktop Board DG33FB Product Guide 26 Installation Precautions When you install and test the Intel Deskt op Board, observe all warnings an d cautions in the installat ion instruction s. To avoid injury, be careful of: • Sharp pins on connectors • Sharp pins on printed circuit assemblies • Rough edges and sharp corners on the chassis •[...]

Installing and Replacing Desktop Board Components 27 Installing the I/O Shield The Desktop Board comes with a n I/O shield. When installed in the chassis, the shield blocks radio frequency t ransmissions, protects internal components from dust and foreign objects, and promotes corre ct airflow within the chassis. Install the I/O sh ield before inst[...]

Intel Desktop Board DG33FB Product Guide 28 Installing and Removing the Desktop Board CAUTION Only qualified technical personnel should do this procedure. Disconnect the computer from its power source before performing th e procedures described here. Failure to disconnect the power before you open the comp uter can result in personal injur y or equ[...]

Installing and Replacing Desktop Board Components 29 Installing and Removing a Processor Instructions on how to install the processo r to the Desktop Board are given below. Installing a Processor CAUTION Before installing or removing t he processor, make sure the AC po wer has been removed by unplugging the power cord fr om the computer; the standb[...]

Intel Desktop Board DG33FB Product Guide 30 3. Lift the load plate ( Fi gure 7, A). Do not touc h the socket contacts ( Fi gure 7, B). Figure 7. Lift the Lo ad Plate 4. Remove the plastic protective sock et cover from the load plate ( Figure 8). Do no t discard the protective socket cover. Always replace the socket cover if the processor is removed[...]

Installing and Replacing Desktop Board Components 31 5. Remove the processor from the protective processor cover. Hold the processor only at the edges, being careful not to touch the bottom of the processor (see Figure 9). Do not disc ard the protective processor co ver. Always replace the processor cover if the processor is removed from the socket[...]

Intel Desktop Board DG33FB Product Guide 32 7. Pressing down on the load plate ( F igure 11, A), close and engage the socket lever ( Figure 11, B). Figure 11. Close the Load Plat e Installing the Processor Fan Heat Sink Desktop Board DG33FB has moun ting holes for a processor fan heat sink. For instructions on how to attach the processor fan heat s[...]

Installing and Replacing Desktop Board Components 33 Connecting the Processor Fan Heat Sink Cable Connect the processor fan heat sink cabl e to the 4-pin processor fan header (see Figure 12). A fan with a 4-pin connector as s hown in Figure 12, A is recommended; however, a fan wi th a 3-pin connec tor ( Figure 12, B) can be used. However, since a f[...]

Intel Desktop Board DG33FB Product Guide 34 Removing the Processor For instructions on how to remove the proce ssor fan heat sink a nd processor, refer to the processor installat ion manual. Installing and Removing Memory NOTE To be fully compliant with all applicable Intel SDRAM memory specifications, the board requires DIMMs that support the Seri[...]

Installing and Replacing Desktop Board Components 35 If additional memory is to be used, install an other matched pair of DIMMs in DIMM 1 (black) in channels A and B (see Figure 14). Figure 14. Dual Chan nel Memory Configuration wi th Four DIMMs Three DIMMs If you want to use three DIMMs i n a dual-cha nnel configuration, in stall a matched pair of[...]

Intel Desktop Board DG33FB Product Guide 36 Installing DIMMs To make sure you have the correct DIMM, place it on the i llustration of the DDR2 DIMM in Figure 16. All the notches shoul d match with the DDR2 DIMM. Figure 16. Use DDR 2 DIMMs[...]

Installing and Replacing Desktop Board Components 37 NOTE Memory must be i nstalled in the Channel A, DIMM 0 socke t to enable Intel Quiet System Technology. To install a DIMM, follow these steps: 1. Observe the precautions in " Before You Begin" on page 25. 2. Turn off all peripheral devi ces connected to the computer. Tur n off the comp[...]

Intel Desktop Board DG33FB Product Guide 38 7. Insert the botto m edge of th e DIMM into the socket. 8. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips sn ap into place. Make sure the clips are firmly in place. 9. Replace the computer’s cover an d reconnect the AC po wer cord. Removing DIMMs To remove a [...]

Installing and Replacing Desktop Board Components 39 Installing and Removing a PCI Express x16 Card CAUTION When installing a PCI Express x16 card on th e Desktop Bo ard, ensure that the card is fully seated in the P CI Expre ss x16 connector before you power on the syste m. If the card is not fully seated in the PCI Expre ss connector, an electric[...]

Intel Desktop Board DG33FB Product Guide 40 Removing the PCI Express x16 Card Follow these in structions t o remove the PCI Express x16 card from the connector: 1. Observe the precautions in " Before You Begin" on page 25. 2. Remove the screw ( Figure 19, A ) that secures the card’s metal bracket to the chassis back panel. 3. Push the c[...]

Installing and Replacing Desktop Board Components 41 Connecting the Diskette Drive Cable The diskette drive cable can be used to conn ect a si ngle diskette drive to t he Desktop Board. For correct function of the cable: • Observe the precautions in " Before You Begin" on page 25. • Attach the cable end labele d P1 to the diskette dri[...]

Intel Desktop Board DG33FB Product Guide 42 Connecting the IDE Cable The IDE cable can be used to connect two ID E drives to the Desktop Board. The cable supports the ATA-66/100 transfer protocol. Figure 21 shows the correct installation of the cable. NOTES ATA-66/100 compatible cables are backward compatib le with drives using slo wer IDE transfer[...]

Installing and Replacing Desktop Board Components 43 Figure 21. Connecting the I DE Cable[...]

Intel Desktop Board DG33FB Product Guide 44 Connecting the Serial ATA (SATA) Cables SATA cables support the Serial ATA protocol . Each cable c an be used to connect a single SATA drive to the Desktop Bo ard. For correct cable function: 1. Observe the precautions in " Before You Begin" on page 25. 2. Attach one end of the SATA cable to on [...]

Installing and Replacing Desktop Board Components 45 Connecting to the Internal Headers Before connecting cables to the internal headers, observe the precautions in “ Before You Begin” on page 25. Figure 23 shows the location of the internal headers. Item Description Item Desc ription A IEEE 1394a E Alternate front panel powe r LED B Front pane[...]

Intel Desktop Board DG33FB Product Guide 46 Connecting to the IEEE 1394a Header See Figure 23, A for the location of the IEEE 1394a header. Table 4 shows the pin assignments for the header. Table 4. IEEE 1394a Signal Header Names Pin Signal Name Pin Signal Name 1 TPA1+ 2 TPA1- 3 Ground 4 Ground 5 TPA2+ 6 TPA2- 7 +12 V 8 +12 V 9 Key (no pin) 10 Grou[...]

Installing and Replacing Desktop Board Components 47 Connecting to the Serial Port Header See Figure 23, C for the location of the serial port header. Table 6 shows th e pin assignments for the header. Table 6. Serial Port Header Signal Name s Pin Signal Name Pin Signal Name 1 DCD 2 RXD# 3 TXD# 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Connection[...]

Intel Desktop Board DG33FB Product Guide 48 Connecting to the Front Panel Header Before connecting to the front panel header, observe the precautions in " Before You Begin" on page 25. See Figure 23, F for the location of the mu lti-colored fron t panel header. Table 9 shows the pin assignment s for t he front panel header. Table 9. Front[...]

Installing and Replacing Desktop Board Components 49 Connecting to the Flexible Audio System After installin g the RealTek audio driver f rom the Intel Ex press Installer CD-R OM, the multi-channel au dio feat ure can be enabled. Figure 24 shows the back panel audio connectors. The default connector assi gnments are shown in the table. Item Descrip[...]

Intel Desktop Board DG33FB Product Guide 50 Connecting Chassis Fan and Power Supply Cables Connecting Chassis Fan Cables Connect chassis fan cables to the 3-pin and 4-pin chassis fan header s on the Desktop Board. Figure 25 shows the location of the chassis fan headers. Figure 25. Location of t he Chassis Fan Headers[...]

Installing and Replacing Desktop Board Components 51 Connecting Power Supply Cables CAUTION Failure to use an appropriate powe r supply and/or not connecting th e 12 V (2 x 2 pin) power connector to the Desktop Board may result in damage to the bo ard or the system may not function properly. The 2 x 12 pin main power connector on th e Desktop Board[...]

Intel Desktop Board DG33FB Product Guide 52 Setting the BIOS Configuration Jumper NOTE Always turn off the power and unplug the power cord from the computer before moving the jumper. Moving the jumper wi th the power on may result in unreliable computer operation. Figure 27 shows t he location of the Desktop Board’s BIOS configuration jumper bloc[...]

Installing and Replacing Desktop Board Components 53 Table 11. Jumper Settings for the BIOS Setup Program M odes Jumper Setting Mode Description Normal (default) (1-2) The BIOS uses the current configuration and passwords for booting. Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to [...]

Intel Desktop Board DG33FB Product Guide 54 10. Turn off the computer. Di sconnect the computer’s power cord from the AC power source. 11. Remove the computer cover. 12. To restore normal operation, place the jumper on pins 1-2 as shown below. 13. Replace the cover, plug in the co m puter, and turn on the computer. Replacing the Battery A coin-ce[...]

Installing and Replacing Desktop Board Components 55 VIKTIGT! Risk för explosion om batteriet ersätts med fe laktig batterityp. Ba tterier ska kasseras enligt de lokala milj övå rdsbestämmelserna. VARO Räjähdysvaara, jos pariston tyyppi on väär ä. Paristot on kierrätettävä, jos se on mahdollista. Käytetyt p aristot on hävi tettävä [...]

Intel Desktop Board DG33FB Product Guide 56 Προσοχή Υπάρχει κίνδυνος για έκρηξη σε περίπτωση που η μπαταρία αντικατασταθεί από μία λανθασμένου τύπου . Οι μπαταρ ίες θα πρέπει να ανακυκλώνονται όταν κάτι τέτοιο ?[...]

Installing and Replacing Desktop Board Components 57 POZOR Zamenjava baterije z baterijo druga č nega tipa lahko povzro č i eksplozijo. Č e je mogo č e, baterije reciklirajte. Rabljene bate rije zavrzite v skladu z lokal nimi okoljevarstvenimi predpisi. . UYARI Yanl ı ş türde pil tak ı ld ı ğ ı nda patlama riski vard ı r. Piller mümkü[...]

Intel Desktop Board DG33FB Product Guide 58 To replace the battery, follow these steps: 1. Observe the precautions in " Before You Begin" (see page 25). 2. Turn off all peripheral devices connec ted to the computer. Di sconnect the computer’s power cord from the AC power source (wall outlet or power adapter). 3. Remove the computer cove[...]

59 3 Updating the BIOS The BIOS Setup program can be used to vi ew and change the BIOS settings for the computer. You can ac cess the BIOS Setup program by pressing the <F2> key a fter the Power-On Self-Test ( POST) memory test begins and before the operating system boot begins. This chapter tel ls you how to updat e the BIOS by either us ing[...]

Intel Desktop Board DG33FB Product Guide 60 Updating the BIOS with the ISO Image BIOS Update File or the Iflash Memory Update Utility You can use the i nformation in this section to update the BIOS usi ng either the Iflash Memory Update Utility or t he ISO Image BIOS update file. Obtaining the BIOS Update File You can update to a new version of the[...]

Updating the BIOS 61 CAUTION Do not interrupt the pro cess or the system may not functio n properly. Follow these instru ctions to upgrade th e BIOS using the ISO Image BIOS file: 1. Download the ISO Image BIOS file. 2. Using software capable of un compressing and writing an ISO image file t o CD, burn the data to a blank CD. NOTE Copying the ISO I[...]

Intel Desktop Board DG33FB Product Guide 62 CAUTION Do not interrupt the pro cess or the system may not functio n properly. 1. Uncompress the BIOS update file and copy th e .BIO file, IFLASH.EXE , and .ITK file (optional) to a bootable USB flash drive or other bootable USB media. 2. Configure the BIOS or use the F10 option during POST to boot to th[...]

63 A Error Messages and Indicators Desktop Board DG33FB reports POST errors in two ways: • By sounding a beep code • By displaying an error message on the monitor BIOS Beep Codes The BIOS also issues a beep code (one long tone followed by t wo short tones) dur ing POST if the video configuration fails (a faulty video card or no card installed) [...]

Intel Desktop Board DG33FB Product Guide 64[...]

65 B Regulatory Compliance This appendix contains the following regulatory compliance informatio n for Desktop Board DG33FB: • Safety regulations • European Union Declaration of Conformity statement • Product Ecology statements • Electromagnetic Compatibili ty (EMC) regulations • Product certificati ons Safety Regulations Desktop Board DG[...]

Intel Desktop Board DG33FB Product Guide 66 European Union Declaration of Conformity Statement We, Intel Corporation, declare u nder our sole responsibilit y that the product Intel ® Desktop Board DG33FB is in conformity with all applicable essential requ irements necessary for CE marking, following the provision s of the European Coun cil Directi[...]

Regulatory Compliance 67 Lietuvi ų Šis produktas atitinka Europos direktyv ų 89/336/EEC ir 73/23/EEC nuostatas. Malti Dan il-prodott hu konformi mal-provve dimenti tad-Direttivi Ewropej 89/336/EEC u 73/23/EEC. Norsk Dette produktet er i henhold t il bestemmelsene i det eu ropeiske direktivet 89/336/ EEC & 73/23/EEC. Polski Niniejszy produkt [...]

Intel Desktop Board DG33FB Product Guide 68 Product Ecology Statements The following inf ormation is provided to address worldwide produ ct ecology concerns and regulations. Recycling Considerations As part of its commitment to envi ronmenta l responsibi lity, Intel has im plemented the Intel ® Product Recycling Program to allow reta il consumers [...]

Regulatory Compliance 69 Français Dans le cadre de son engagement pour la protection de l'envi ronnement, Intel a mis en œuvre le programme Intel Produ ct Recycling Program (Programme de recyclage des produits Intel) pour permettre aux cons ommateurs d e produits Intel de recycler les produits usés en l es retournant à des adresses spéci [...]

Intel Desktop Board DG33FB Product Guide 70 Türkçe Intel, çevre sorumlulu ğ una ba ğ ı ml ı l ı ğ ı n ı n bir parças ı olarak, perakende tüketici lerin Intel markal ı kullan ı lm ı ş ürünlerini belirlenmi ş merkezlere iade edip uygun ş ekilde geri dönü ş türmesini amaçlaya n Intel Ürün leri Geri Dönü ş üm Program ı[...]

Regulatory Compliance 71 Table 15. Lead-Free Board Markings Description Mark Lead-Free 2 nd Level Interconnect: This symbo l is used to identify el ectrical and electro nic ass emblies an d componen ts in which t he lead (Pb) co ncentratio n level in t he Desktop Board substrate and the solder connections from the board to the components (seco nd-l[...]

Intel Desktop Board DG33FB Product Guide 72 EMC Regulations Desktop Board DG33FB complies with the EMC regulations stated in Table 16 when correctly installed in a compat ible host system. Table 16. EMC Regulations Regulation Title FCC Class B Title 47 of the Code of Federal Regul ations, Parts 2 and 15, Subpart B, Radio Frequency Devi ces. (USA) I[...]

Regulatory Compliance 73 Korean Class B statemen t translation: This is hous ehold equipment that is certified to comply with EMC requirement s. You may use this equipment in residential environments and other non-residenti al environments. Ensure Electromagnetic Compatibility (EMC) Compliance Before computer integration, make sure th at the power [...]

Intel Desktop Board DG33FB Product Guide 74 Product Certifications Board-Level Certification Markings Desktop Board DG33FB has th e following product certificat ion markings: Table 17. Product Certification Markings Description Mark UL joint US/Canada Recognized Comp onent mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. FC[...]

Regulatory Compliance 75 Chassis and Component Certifications Ensure that the chassis and certain componen ts; such as the power supply, peripheral drives, wiring, and cables; are components certified for the coun try or market where used. Agency certification marks on the product are proof of certif ication. Typical product certificatio ns include[...]