Intel PCI-6886 Bedienungsanleitung

PCI-6886 PCI Intel ® Celeron ® M 600MHz 0L2 Half-sized SBC with VGA/ L VDS/LAN/USB2.0/SA T A and SDD User ’ s Manual[...]

PCI-6886 User’s Manual ii Copyright This document is copyrighted, © 20 05. All rights are reserved. The origi- nal manufacturer reserves the right to make improvem ents to the products described in this manual at any time wi thout notice. No part of this m anual may be repro duced, copied, transl ated or transmit- ted in any form or by any means[...]

iii Packing List Before you begin installing your card, please make su re that the following materials have been shipped: • 1 PCI-6886 all-in one single board computer • 1 startup manual • 1 CD-ROM or disks for utility , drivers, and m anual (in PDF format) • 1 power cable p/n:17000002 65 • 1 Y cable for PS/2 Keyboard, PS/2 Mouse p/n:1700[...]

PCI-6886 User’s Manual iv Model No. List Description PCI-6886F-M0A1 PCI Celeron M 600M 0L2 Slot PC W/852GM PCI-6886FG-M0A1 PCI Celeron M 600M 0L2 Slot PC W/852GM,Giga LAN A d d i t i o n a l I n f o r m a t i o n a n d A s s i s ta n c e V isit the Advantech web site at www .advantech.com where you can find the latest information about the produc[...]

v FCC This device complies with the re quirements in part 15 of the FCC rules: Operation is subject to the following two conditio ns: 1.This device may n ot cause harmful interfer- ence, and 2. This device must accept any interference received, including interfer ence that may cause undesired operation This equipment has been tested and foun d to c[...]

PCI-6886 User’s Manual vi[...]

vii Contents Chapter 1 General Information ........................................ 2 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Features ............. ................ ................. ................. .............. 2 1.3 Specifications ............ ................. ................. ....[...]

PCI-6886 User’s Manual viii 2.19 Front Panel Connector (CN1) ............... .................... ...... 19 2.19.1 Reset (Pin7& Pin8) ........... ........... ........... ........... ........... 19 2.19.2 HDD LED (Pin1&Pin2)........ .............. ............. ........... .. 19 2.19.3 Power LED (Pin 3 & Pin 4) .. ............ ........[...]

ix 4.2.13 Exit Without Saving........ ............. ........... ........... ........... 41 Figure 4.13:Quit without saving .... ............ ........... ........ 41 Chapter 5 PCI SVGA Setup ............................................ 44 5.1 Introduction ......... ............................................................ 44 5.1.1 Chipse t ......[...]

PCI-6886 User’s Manual x Table B.9:LCD INV power conne ctor (CN20) ............ 72 B.10 DIO connector(CN2) ............ ................. .................... ...... 73 Table B.10:DIO connector(CN2) .. ............ ........... ........ 73 B.11 LVDS connector(CN15) ............ ................. .................... 74 Table B.11:LVDS connector (C[...]

1 Chapter 1 General Information 1 General Information This chapter gives background information on the PCI-6886. Sections include: • Introduction • Features • Specifications • Board layout and dimensions CHAP TER[...]

PCI-6886 User’s Manual 2 Chapter 1 General Information 1.1 Introduction The PCI-6886 series is a half-sized PCI bus CPU card designed with powerful Intel Celero n M processor , with In tel 852GM and 63 00ESB chipset, which supports enhanced Intel "SpeedStep" technology and Dynamic V ideo Memory T echnology . For maximum performance, PCI[...]

3 Chapter 1 General Information • Support s 4 x USB2.0 por t • Supports 2 Channel 3 6bits L VDS for LCD • Supports 400MHz Fro nt Side Bus • Supports 200-MHz, and 266-MHz DDR SDRAM 1.3 Specifications 1.3.1 St andard SBC Functio ns • CPU: Intel Celeron M 600MHz(0 KB) onboard:(PCI-6 886F- M0A1,PCI-6886FG-M0A1). Sup ports 400MHz FSB processor[...]

PCI-6886 User’s Manual 4 1.3.2 Display Interfa ce • Chipset : Intel 852GM • Memory size: Optimized Shared Memory Architecture,supports up to 64 MB frame buffer using system memory • Display modes : CR T Modes: up to 1600 x 1200 @ 32bpp (85Hz); LCD Modes: up to UXGA panel resolutipn with frequency range from 25-MHz to 112-MHz • LCD Interfa[...]

5 Chapter 1 General Information 1.4 Board layout: dimensions Figure 1.1: Board layout: dimensions (comp onent side)[...]

PCI-6886 User’s Manual 6 Figure 1.2: Board layout: di mensions (solder side)[...]

7 Chapter 2 Installation 2 Inst allation This chapter explains the setup procedures of PCI-6886 hardware, including instruc- tions on setting jumpers and con necting peripherals, switches and indicators. Be sure to read all safe ty precautions before you begin the i nstallation procedure. CHAP TER[...]

PCI-6886 User’s Manual 8 Chapter 2 Inst allation 2.1 Jumpers The PCI-6886 has a number of jumper s that allow you to confi gure your system to suit your application. The tabl e below lists the functions of the various jump ers. T able 2.1: Jumpers Label Functi on JP1 COM2 RS232/422/485 Selection JP2 CMOS Clear JP3 L VDS Panel Power Selection JP4 [...]

9 Chapter 2 Installation 2.2 Connectors On-board connectors link the PC I-6886 to external devi ces such as hard disk drives, a keyboard, or floppy drives. The table below lists the func- tion of each of th e board’ s connectors. T able 2.2: Connecto rs Label Functi on CN1 Front Pannel Connector CN2 Digital I/O Connector CN3 Primary IDE Connector[...]

PCI-6886 User’s Manual 10 2.3 Locating Connectors(component side) Figure 2.1: Jumper&Connector Locations[...]

11 Chapter 2 Installation 2.4 Locating Connectors(solder side) Figure 2.2: Connectors (component side)[...]

PCI-6886 User’s Manual 12 2.5 Setting Jumpers Y ou may configu re your card to match the needs of your applicatio n by setting jumper s. A jumper is a metal br idge used to close an electric cir- cuit. It consists of two metal pi ns and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. T o “close[...]

13 Chapter 2 Installation 2.6 COM2 RS232/422 /485 Select(JP1) 2.7 Clear CMOS (JP2) This jumper is used to erase CMOS data(including the set ting of date, time and pa ssword) and rese t system BIOS information. The procedure for clearing CMOS is: 1. T urn off the system. 2. Short pin 1 and pin 2. 3. T urn on the system. The BIOS is now reset to its [...]

PCI-6886 User’s Manual 14 2.8 L VDS Panel Power Select(JP3) 2.9 PCI Card Power Select(J P4) 2.10 Inst alling SODIMMs The procedure for installing SODI MMs appears below . Please follow these steps carefully . 1. Make sure that all power supplies to the system are switched off 2. Install the SODIMM card. Install the SODIMM so that its gold pin s T[...]

15 Chapter 2 Installation point down i nto the SODIMM socket. 3. Slip the SODIMM into the sock et at a 45 degree angle and care- fully fit the bottom of the card against the connectors. 4. Gently push the SO DIMM into a perpendicular posi tion until the clips on the ends of the SODI MM sockets snap into place. 5. Check to ensure that the SODIMM is [...]

PCI-6886 User’s Manual 16 2.12 Printer port connector (CN6) Normally , the parallel port is used to connect the card to a printer . The PCI-6886 includes a multi-mode (E CP/EPP/SPP) parallel port accessed via CN6 and a 26-pin flat-cable connect or . Y ou will need an adapter cable if you use a traditional DB-25 connect or . The adapter cable has [...]

17 Chapter 2 Installation 3. If you are connecting a 5.25” floppy drive, line up the slot in the printed circuit board with the bl ocked-off part of the cable connec- tor . If you are connecting a 3.5” floppy dri ve, you may have trouble determin- ing which pin is number one. Look fo r a number printed on the circuit board indicating pi n numbe[...]

PCI-6886 User’s Manual 18 2.16 VGA/L VDS interface connections The PCI-6886’ s display interface can drive conventional CR T displays and is capable of driving a wide range of L VDS flat pane l displays as well. The board has two display connecto rs: one for standard CR T VGA monitors, and one for L VDS flat panel displays. 2.16.1 CRT display c[...]

19 Chapter 2 Installation use a standard USB connector . The ad apter cable has a 5 x 2-pin connec- tor on one end and a USB connector on the other . The USB interfaces can be disabl ed in the system BIOS setup. 2.18 Ethernet configuration The PCI-6886 is equipped wi th a high performance 32-b it PCI-bus Ether- net interface which is fully compli a[...]

PCI-6886 User’s Manual 20 The HDD LED indicator would light when HDD works. 2.19.3 Power LED (Pin 3 & Pin 4) Pin 3 & Pin4 The Power LED indicator woul d light when the power is on. 2.19.4 Suspend LED(Pin 5 & Pin 6) Pin5&Pin6 The Suspend LED indicator wo uld light when the computer is suspend. 2.19.5 Power Button (Pin 9 & Pin10[...]

21 Chapter 2 Installation 2.23 AC'97 interfa ce Connector (CN17) PCI-6886 can support separate independent PCI functions for Aud io and Modem, which is complian t to AC'97 V ersion 2.2 standard. The AC'97 interface is a 5 x 2 pin box head er . Th e PCI-6886 can support Audio with the addition of optional PCM-231A-00A1. Detailed pin a[...]

PCI-6886 User’s Manual 22[...]

CHAP TER 3 Sof tware Configuration This chapter details the software con- figuration information . It shows you how to configure the card to match your application requirements. A ward System BIOS will be covered in Chapter 4. Sections include: • Introduction • VGA display software configuration[...]

PCI-6886 User’s Manual 24 Chapter 3 Sof tware Configuration 3.1 Introduction The system BIOS and custom drivers are located in a 512 KB, 32-pin (JEDEC spec.) Flash ROM device, designated U10. A single Flash chip holds the system BIOS, VGA BIOS, and network Boot ROM image. The display can be configured via software. This method minimizes the numbe[...]

25 Chapter 3 2. At th e prompt, t ype A WDFLASH .EXE and press <Enter>. The VGA configuration program will then display the followi ng: 3. At the prompt, enter the new BIN file which suppo rts your display . When you are sure that you have entered the file name correctly press <Enter>. 4. The screen will ask “Do you want to save BIOS?[...]

PCI-6886 User’s Manual 26[...]

27 Chapter 4 Ducks that N eed Love! 4 A ward BIOS Setup This chapter describes how to set BIOS configuration data. CHAP TER[...]

PCI-6886 User’s Manual 28 Chapter 4 A ward BIOS Setup 4.1 System test and initialization These routines test and initialize bo ard hardware. If the routines encoun- ter an error during the tests, you wil l either hear a few short beeps or see an error message on the sc reen. There are two kind s of errors: fatal and non-fatal. The system can usua[...]

29 4.2 Award BIOS setup A w ard’ s BIOS ROM has a built-in Set up program that allow s users to modify the basic system configu ration. This type of inform ation is stored in battery-backed CMOS RAM so that it reta ins the Setup in formation when the power is turned off. 4.2.1 Entering setup Power on the comp uter and press <Del> immedi ate[...]

PCI-6886 User’s Manual 30 4.2.2 St andard CMOS Featu res setup When you choose the Standard CMOS Features option from the Initial Setup Screen menu, the screen shown belo w is displayed. This standard Setup Menu allows users to configure system components such as date, time, hard disk drive, floppy drive and display . Once a field is high- lighte[...]

31 4.2.3 Advanced BIOS Features setup By choosing the Advanced BIOS Features Setup op tion from the Initial Setup Screen menu, the sc reen below is displayed. This sample screen contains the manufacturer ’ s defaul t values for the PCI-6886 Series. Figure 4.3: Advanced BIOS Features setup[...]

PCI-6886 User’s Manual 32 4.2.4 Advanced Chip set Features setup By choosing the Advanced Ch ipset Features option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer ’ s default va lues for the PCI-6886 Series. Figure 4.4: Advanced Chipset Features setup[...]

33 4.2.5 Integrated Peripherals Choosing the Integrated Peripheral s option from the Initial Setup Screen menu should prod uce the screen belo w . Here we see the manufacturer ’ s default values for the PCI-688 6 Series. Figure 4.5: Integrated Peripherals[...]

PCI-6886 User’s Manual 34 4.2.6 Power Management Setup By choosing the Power Manage ment Setup option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer ’ s default va lues for the PCI-6886 Series. Figure 4.6: Power Management Setup[...]

35 4.2.7 PnP/PCI Configurations By choosing the PnP/PCI Configu rations option from the Initi al Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer ’ s default va lues for the PCI-6886 Series. Figure 4.7: PnP/ PCI Conf igurations[...]

PCI-6886 User’s Manual 36 4.2.8 PC Health St atus The PC Health Status option displays information such as CPU and moth- erboard temperatures, fan speeds, and core voltage. Figure 4.8: PC Health S tatus[...]

37 4.2.9 Frequency/V oltage Control By choosing the Frequency/V oltage Control option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer ’ s defau lt values for the PCI-6886 Figure 4.9: Frequency/V oltage Control Caution Incorrect settings in Frequency/V olt age Control may damage the s[...]

PCI-6886 User’s Manual 38 4.2.10 Load Optimized Default s Load Optimi zed Defaults loads the default system values directly from ROM. If the stored record created by the Setup program should ever become corrupted (and therefore unusabl e), these defaults will load auto- matically when you turn th e PCI-6886 Series system on. 4.2.1 1 Set Password [...]

39 1. Choose the Set Passw ord option from t he CMOS Setup Utility main menu and press <Enter>. 2. When you see “Enter Password,” enter the desired password and press <Enter>. 3. At the “Confirm Password” prompt, retype the desired password, then press <Enter>. 4. Select Save to CMOS and EXIT , type <Y>, then <Ent[...]

PCI-6886 User’s Manual 40 6. Select Save to CMOS and EXIT , type <Y>, then <Enter>. T o Disable Password 1. Choose the Set Passw ord option from t he CMOS Setup Utility main menu and press <Enter>. 2. When you see “Enter Password,” enter the existing password and press <Enter>. 3. Y ou will see “Confirm Password.” [...]

41 If you select this option and press <Y > then <Enter>, the values entered in the setup utilities will be reco rded in the chipset ’ s CMOS memory . The microprocessor will check this every time you turn your syst em on and use the settings to configure the syst em. This record is required fo r the system to operate. 4.2.13 Exit Wit[...]

PCI-6886 User’s Manual 42[...]

CHAPTER 5 PCI SVGA Setup Introduction Installation of SVGA drivers -for W indows 2000/XP Further information[...]

PCI-6886 User’s Manual 44 Chapter 5 PCI SVGA Setup 5.1 Introduction The board has an onboard interface. The specificat ions and features are described as follows: 5.1.1 Chip set The PCI-6886 uses a Intel 852GM + 6300ESB chipset fo r its graphic con- troller . It supports L VDS LCD displays, conventio nal CR T mon itors. 5.1.2 Display memory The 8[...]

45 Chapter 5 5.2 Inst allation of the SVGA Driver Complete the followin g steps to install the SVGA driver . Follow the pro- cedures in the flow char t that apply to the operating syst em that you are using within your board. 5.2.1 Inst allation for Windows 2000/XP T o install SV GA driver for W indow 2000/XP , please run the setup wizard "Int[...]

PCI-6886 User’s Manual 46 2. Press the "Next" button. 3. Press the "Next" button.[...]

47 Chapter 5 4. In order to continue setup, you must accept the agreement, press the "Y es" butto n and wait a m inute. 5. Choose the option "Y es, I want to restart my computer now ." and press the "Finish" button.[...]

PCI-6886 User’s Manual 48 5.3 Further Information For further information about the AGP/VGA installation in yo ur PCA- 6886, includi ng driver updates, tro ubleshooti ng guides and F AQ lists, visit the following web resources: Intel websit e: www .intel.com. Advantech websites: www .advantech.com www .ad vantech.co m.tw[...]

CHAPTER 6 PCI Bus Ethernet Inter- face This chapter provides informatio n on Ethernet conf iguration. • Introduction • Installation of Ethernet driv ers for W indows XP • Further infor mation[...]

PCI-6886 User’s Manual 50 Chapter 6 PCI Bus Ethernet Interface 6.1 Introduction The board is equipped with a hig h performance 32-bit Ethernet chipset which is fully compliant with 802.3u 100BASE-T or 802.3z/ab 1000BASE-T . It is support ed by major network operating systems. It is also both 100Base-T a nd 10Base-T compatibl e. The Ethernet port [...]

51 Chapter 6 1. Select “ Ethernet Contro ller” from Device Manager . 2. Select “Update Driver”.[...]

PCI-6886 User’s Manual 52 3. Click the “Next” button. 4. Click the “Next” button.[...]

53 Chapter 6 5. Please choose “Continue Anyway”. 6. Click the “Finish” button[...]

PCI-6886 User’s Manual 54[...]

55 Chapter 7 CHAPTER 7 Audio Setup • Introduction • Installation of audio driver fo r W in- dows XP[...]

PCI-6886 User’s Manual 56 Chapter 7 Audio Setup 7.1 Introduction The PCI-6886 supports AC97 audio through the optional aud io module PCM-231A-00A1. 7.2 Driver inst allation 7.2.1 Before you begin Please read the instructions in this chapter carefully before you attem pt installation. The audio drivers fo r th e PCI-6886 board are located on the a[...]

57 Chapter 7 1. Select the path: D:wdm_a357, then double click to run "Install Shield W izard". 2. Press the "Next" button and wait for a moment.[...]

PCI-6886 User’s Manual 58 3. Choose the option "Continue Anyw ay”. 4. Choose the option "Y es, I want to restart my computer now", then click "Finish" button to reboot your computer .[...]

Appendix A Programming GPIO & W atchdog T imer The board is equipped with a watchdog timer that resets the CPU if pro cessing comes to a standstill for any reason . This feature ensures sy stem reliability in industrial standalone or unman ned environments.[...]

PCI-6886 User’s Manual 60 Appendix A Programming GPIO & W a tchdog T imer A.1 Supported GPIO Register Bellow are detail ed description of the GPIO addresse s an d programming sample. A.1.1 GPIO Registers CRF0 (GP10-GP17 I/O selection register . Defa ult 0xFF) When set to a '1', respective GPIO port is programmed as an input port. Wh[...]

61 Appendix A A.1.2 GPIO Example program-1 --------- --------- ---------- ----------- --------- Enter the extended function mode, in terruptible double-write --------- --------- ---------- ----------- --------- MOV DX,2EH MOV AL,87H OUT DX,AL OUT DX,AL --------- --------- ---------- ----------- ---------- --------- ----- Configurate logical device [...]

PCI-6886 User’s Manual 62 OUT DX,AL MOV DX,2FH MOV AL,??H ; Put the output value int o AL OUT DX,AL --------- --------- ---------- ----------- --- Exit extended funct ion mode | --------- --------- ---------- ----------- --- MOV DX,2EH MOV AL,AAH OUT DX,AL A.2 W atchdog programming W atchdog: (Index Port:300H , Data Port:301) 1, Enable W atchdog [...]

63 Appendix A Outportb (0x2e,0xaa); //Exi t Configuration Mode 3, Disable W atchdog Outportb (0x2e,0x87 ); Outportb (0x2e,0x87 ); //Entry Configuration Mode Outportb (0x 2e,0x07); //Select Register Index 0x07 Outportb (0x2f,0x 08); //Select LDN 8 Outportb (0x 2e,0x30); //Select LDN 8 Register Index 0x30 Outportb (0x2f,0x 00); //Disable W atchdog Ti[...]

PCI-6886 User’s Manual 64[...]

65 Appx. B B Pin Assignment s This appendix contains information of a detailed or specialized nature. It includes: • Floppy Drive Connector • Primary IDE Connect or • LP T Connector • Secondary IDE(Slave) Connector • A TX Power Connector • COM3/CO M4 output • USB1, 2 Connector • USB3, 4 Connector • D-SUB VGA Connecto r • LAN, RJ[...]

PCI-6886 User’s Manual 66 Appendix B Pin Assignment s B.1 A TX power connector (CN5) T able B.1: A TX power connector(CN5) Pin Signal 1G N D 2G N D 3+ 5 V 4G N D 5+ 5 V 6 5VSB 7G N D 8P S O N # 9+ 5 V 10 GND 11 + 5 V 12 +12V[...]

67 Appx. B B.2 Floppy connector (CN4) T abl e B.2: Floppy Connector (CN4) Pin Signal Pin Signal 1G N D 2 R W C # 3G N D 4 N C 5G N D 6 D S 7 GND 8 Inde x# 9G N D 1 0 M O A # 1 1 GND 12 DSB# 13 GND 14 DSA# 14 GND 16 MOB# 17 GND 18 DIR# 19 GND 20 ST EP# 21 GND 22 WD# 23 GND 24 WE# 25 GND 26 Track0# 27 GND 28 WP# 29 GND 30 RDA T A# 31 GND 32 HEAD# 33 [...]

PCI-6886 User’s Manual 68 B.3 Primary IDE Connector (CN3) T able B.3: Prima ry IDE connector (CN3) Pin Signal Pin Signal 1 IDE RESET 2 G ND 3D 7 4D 8 5D 6 6D 9 7D 5 8D 1 0 9D 4 1 0 D 1 1 1 1 D3 12 D12 13 D2 14 D13 15 D1 16 D14 17 D0 18 D15 19 GND 20 NC 21 REQ 22 GND 23 IOW 24 GND 25 IOR 26 GND 27 READY 28 Cable Select 29 DACK 30 GND 31 IRQ14 32 N[...]

69 Appx. B B.4 Secondary IDE Connector(Slave) (CN7) T able B.4: Seconda ry IDE connector (CN7) Pin Signal Pin Signal 1 IDE RESET 2 G ND 3D 7 4D 8 5D 6 6D 9 7D 5 8D 1 0 9D 4 1 0 D 1 1 1 1 D3 12 D12 13 D2 14 D13 15 D1 16 D14 17 D0 18 D15 19 GND 20 NC 21 REQ 22 GND 23 IOW 24 GND 25 IOR 26 GND 27 READY 28 Cable Select 29 DACK 30 GND 31 IRQ14 32 NC 33 A[...]

PCI-6886 User’s Manual 70 B.5 CompactFlash connector(CN21) T able B.5: CompactFlash Connector (C N21) Pin Signal Pin Signal 1 GND 26 #CD1 2D 3 2 7 D 1 1 3D 4 2 8 D 1 2 4D 5 2 9 D 1 3 5D 6 3 0 D 1 4 6D 7 3 1 D 1 5 7# C E 3 2 # C E 2 8 A10 33 #VS14 9# O E 3 4 # I O R D 10 A9 35 #IOWR 11 A 8 3 6 # W E 12 A7 37 #IRQ 13 VCC 38 VCC 14 A6 39 #CSEL 15 A5[...]

71 Appx. B B.6 LAN,RJ45 connector(CN12) B.7 USB1, 2 connector(CN10) T able B.6: LAN,RJ45 connector(CN12) 10/100M Pin Signal Pin Signal 1T X + 5N C 2T X - 6R X - 3R X + 7N C 4N C 8N C 10/100/1000M 1M D I 0 - 5M D I 2 + 2M D I O + 6M D I 2 - 3M D I 1 + 7M D I 3 + 4M D I - 8M D I 3 + T able B.7: USB 1, 2 conn ector(CN10) Pin Signal Pin Signal 1+ 5 V 2[...]

PCI-6886 User’s Manual 72 B.8 USB 3, 4 connector(CN9) B.9 LCD INV power connector(CN20) T able B.8: USB 3, 4 conn ector(CN9) Pin Signal Pin Signal 1+ 5 V 2+ 5 V 3 USB0- 4 USB1- 5 USB0+ 6 USB1+ 7 USB GND 8 USB GND 9 GND 10 NC T able B.9: LCD INV power conn ector (CN20) Pin Signal 1 +12V outpu t 2G N D 3 Back-li ght enable signal output 4 Back-li g[...]

73 Appx. B B.10 DIO connector(CN2) T able B.10: DIO conne ctor(CN2) Pin Signal Pin Signal 1I O 0 2I O 4 3I O 1 4I O 5 5I O 2 6I O 6 7I O 3 8I O 7 9 +5V 10 GND[...]

PCI-6886 User’s Manual 74 B.1 1 L VDS con nector(CN15) T able B.1 1: L VDS connector (CN15) Pin Signal Pin Signal 1 +5V/3.3V 2 +5V/3.3V 3G N D 4G N D 5 +5V/3.3V 6 +5V/3.3V 7 L VDS0_N0 8 L VDS1_N0 9 L VDS0_P0 10 L VDS1_P0 11 G N D 1 2 G N D 13 L VDS0_N1 14 L VDS1_N1 15 L VDS0_P1 16 L VDS1_ P1 17 GND 18 GND 19 L VDS0_N2 20 L VDS1_N2 21 L VDS0_P2 22[...]

75 Appx. B B.12 LPT connector(CN6) T able B.12: LPT connec tor(CN6) Pin Signal Pin Signal 1S T B # 2A F D # 3D 0 4E R R 5 D1 6 INIT# 7D 2 8S L I N 9D 3 1 0 G N D 11 D 4 1 2 G N D 13 D5 14 GND 15 D6 16 GND 17 D7 18 GND 19 ACK# 20 GND 21 BUSY 22 GND 23 PE 24 GND 25 SLCT 26 NC[...]

PCI-6886 User’s Manual 76 B.13 COM 1, 2 Conn ector (CN13, CN14) T able B.13: COM conn ector (CN 13, CN14) COM1 connector (CN13) COM2 connector (CN14) Pin Signal Pin Signal Pin Signal Pin Signal 1D C D 6D S R 1D C D 2D S R 2S I N 7 R T S 3S I N 4R T S 3 SOUT 8 CTS 5 SOUT 6 CTS 4 DTR 9 RI 7 DTR- 8 RI 5G N D 9G N D 1 0N . C . 1 1 TXD422+/ 485+ 12 TX[...]

77 Appx. B B.14 COM 3, 4 Connector (CN8) B.15 Audio I/F connector(CN17) T able B.14: COM3,4 Connector(CN8) Pin Signal Pin Signal 1 DCD3 2 DSR3 3S I N 3 4R T S 3 5 SOUT3 6 CTS3 7D T R 3 8R I 3 9G N D 1 0 G N D 1 1 DCD4 12 DSR4 13 SIN4 14 RTS4 15 SOUT4 16 CTS4 17 DTR4 18 RI4 19 GND 20 GND T able B.15: Aud io I/F connector(CN17) Pin Signal Pin Signal [...]

PCI-6886 User’s Manual 78 B.16 D-SUB VGA connector(CN1 1) B.17 MINI PS/2_KB/M ouse connector(CN19) T able B.16: D-SUB VGA conn ector(CN1 1) Pin Signal Pin Signal 1R 9+ 5 V 2G 1 0 G N D 3B 1 1 N C 4N C 1 2 S - D A T A 5 GND 13 HSYNC 6 GND 14 VSYNC 7 GND 15 S-CLK 8G N D T able B.17: MINI Keyb oard co nnector(CN19) Pin Signal 1 KBDA T A 2M S D A T A[...]

79 Appx. B B.18 EXT_KB connector(CN18) B.19 HDD LED/Reset /Power Button(CN1) T able B.18: EXT_KB /Mouse connector(CN18) Pin Signal 1 KBCLK 2 KBDA T A 3N C 4G N D 5+ 5 V T able B.19: HDD LED/Re set/Power Button(CN1 ) Pin Signal Pin Signal 1 +5V 2 HDD_LED 3+ 5 V 4 G N D 5 SUSPEND 6 5VSB 7 RESET 8 GND 9 PWR_Button 10 GND 3 6 4 5 28 9 7 10 1[...]

PCI-6886 User’s Manual 80 B.20 DVI connector (CN16) B.21 CPU F AN connector (F AN1) T able B.20: DVI conn ector(CN16) Pin Signal Pin Signal 1 TDC0- 2 VCC 3 TDC0+ 4 TDCCLK- 5 GND 6 TDCCLK+ 7 TDC1- 8 GND 9 TDC1+ 10 MDVICLK 11 G N D 1 2 M D V I D ATA 13 TDC2+ 14 HOT_DETECT 15 TDC2+ 16 MI2CDA T A 17 VCC 1 8 MI2CCLK 19 NC 2 0 NC T able B.21: CPU F AN [...]

81 Appx. B B.22 Serial A T A (SA1,SA2) T able B.22: Serial A T A (SA1, SA2) Pin Signal 1G N D 2T X + 3T X - 4G N D 5R X - 6R X + 7G N D[...]

PCI-6886 User’s Manual 82[...]

83 Appx. C C System Assignment s This appendix contains information of a detailed n ature. It inclu des: • System I/O ports • 1st MB memory map • DMA channel assignments • Interru pt assignments Appendix[...]

PCI-6886 User’s Manual 84 Appendix C System Assignment s C.1 System I/O Port s T able C.1: System I/O ports Addr . range (Hex) Device 00-0F Master DMA controller 20-21F Master Interr upt controlle r 40-5F T imer/Co unter 60-6F Keyboard controller (60h) KBC Data (61h) Misc Funtions & S pkr Ctrl (64h) KBC Command/S t atus 70-77 RTC/COMS/NMI-Dis[...]

85 Appx. C C.2 1st MB memory map C.3 DMA channel assignment s CF8-CFB PCI Configuration Address CFC-CFF PCI Configuration Data D00-FFFF -available for system use- T able C.2: 1st MB memory map Addr . range (Hex) Device F0000h - FFFFFh System ROM *D0000h - EFFFFh Unused (reserved for Ethernet ROM) C0000h - CFFFFh Expansion ROM (for VGA BIOS) B8000h [...]

PCI-6886 User’s Manual 86 C.4 Interrupt assignment s T able C.4: Inte rrupt assignments Interrupt# Interrupt source IRQ 0 Interval timer IRQ 1 Key board IRQ 2 Interrupt from controller 2 (cascade) IRQ 3 COM2 IRQ 4 COM1 IRQ 5 COM4 IRQ 6 FDD IRQ 7 LPT1 IRQ 8 RTC IRQ 9 Reserved (au dio) IRQ 10 COM3 IRQ 1 1 Reserved for watchdog timer IRQ 12 PS/2 mou[...]

Appendix D Intel Speedstep T ech- nology • Introduction and Installation[...]

PCI-6886 User’s Manual 88 Appendix D Intel S peedstep T echnology D.1 Intel ® Pentium ® M S peedStep instruction Mobile Intel ® Pent ium ® M processors with En hanced Intel SpeedS tep ® technology let users customize high performance com puting on their PC.The Enhanced Intel SpeedStep technology provides the Pentium M processor a flexible, m[...]

89 Appendix D[...]

PCI-6886 User’s Manual 90 Step 3. Discover the different CPU freq. by using FrequencyDisplay util- ity[...]

91 Appendix D The Result of Pentium M speed stepping: 1.1G---600MHz / 800MHz / 1.1GH z( Intel ® Pen tium ® M) 1.6G---600MHz / 80 0MHz / 1.0GHz /1.2GHz / 1.4GHz / 1 .6GHz( Intel ® Pentium ® M)[...]

PCI-6886 User’s Manual 92[...]