Memorex MPH6935 Bedienungsanleitung

Introduction Thank you for choosing this Memorex® cordless telephone. This phone is designed to exacting standards that provide reliability , long life and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features • 900 MHz T echnology • 3-line Backlit Display • Face U[...]

20 21 22 23 24 Control and Functions 2 1. Handset antenna 2. Beltclip holes 3. Handset battery compartment 4. Handset earpiece 5. LCD display 6. Cid/Menu key 7. T alk/Flash key 8. V olume/Cursor down key 9. * /Left cursor/T one key 10. Redial/Pause key 4 1 2 3 5 6 7 8 9 12 13 14 18 19 10 11 15 16 17 1 1. Select key 12. V olume/Cursor up key 13. Spe[...]

3 T able of Contents Introduction ..................................................................................................... 1 Features ............................................................................................................1 Control and functions .......................................................................[...]

4 When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Use a dry cloth for [...]

5 E. If the product has been dropped or the cabinet has been damaged. F . If the product exhibits a distinct change in performance. 13. Do not use the telephone to report a gas leak in the vicinity of the leak. Additional battery safety precautions Caution: T o reduce the risk of fire or injury to persons by the battery , read and follow these inst[...]

6 Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm. The FCC Wants Y ou T o Know Changes or modifications to this produ[...]

7 Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless handset, or clicking noises in the base. This interference is caused by an external source such as a TV , refrigerator , vacuum cleaner , fluorescent lighting, or electrical storm. Y our unit is NOT DEFECTIVE. If these noises continue and are too dis[...]

8 Read This First This cordless telephone must be set up before use. Follow these steps: Step 1 (page 9) Unpack the telephone and accessories. Step 2 (page 10 to 12) Next, choose the best location to set up the base unit. Step 3 (page 13 to 14) Then, insert the battery pack into the handset. Y ou have to charge the battery pack for 15-20 hours befo[...]

9 Step 1 Checking the package contents Make sure you have received the following items in the package. • Base unit • Handset • Rechargeable battery pack (BT -905) • T elephone line cord • AC adapter (AD-310) • This Owner's Manual • Other Printed Materials Important Please keep all packaging material for at least 90 days in case y[...]

10 Step 2 Setting up the base unit Do the following steps: • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read the IMPORT ANT ELECTRICAL CONSIDERA TIONS. Here are some important guidelines you should consider: • Y ou should charge your hand[...]

11 Step 2 (continued) Connect the base unit If you want to install the base unit on the wall, see page 33. 1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet. 2 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 3 Set the base unit on a desk or tabletop and place the handset in the base [...]

12 Step 2 (continued) Notes • Use only the supplied AD-310 AC adapter . Do not use any other AC adapter . • Place the base unit close to the AC outlet so that you can unplug the AC adapter easily . • Connect the AC adapter to a continuous power supply . Ti p If your telephone outlet isn't modular , contact your telephone company for assi[...]

13 Step 3 Preparing the battery pack Charge the battery pack for 15-20 hours before connecting the phone line. 1 Press and slide the battery compartment cover toward the bottom of the unit. 2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment. 3 Securely clos[...]

14 Step 3 (continued) Battery use time (per charge) From fully charged • 7 hours continuous use. • 14 days when the handset is in the standby mode. When the battery charge becomes low When the voltage of battery pack is very low and needs to be charged, the phone eliminates functions to save power . If the phone is not in use, “ Low Battery ?[...]

Making Calls Dialing from standby 1 Dial the phone number . (up to 32 digits.) Example: Enter 800-919-3647 2 Press TALK/FLASH . “ Talk ” flashes on the display . Then the volume setting appears for a few seconds. Example: V olume level “High” 3 The number is dialed. After about 5 seconds, the call-time display appears. 4 T o hang up, press [...]

Receiving Calls 1 Phone rings. When the handset receives a Caller ID message, the following display appears. 2 Press TALK/FLASH . “ Talk ” and the volume setting appears on the display . 3 T o hang up, press OFF or place the handset in the base. The call time will be displayed for about 5 seconds. Receiving a call Instant T alk when ringing Whe[...]

17 Handset Ringer and Earpiece V olume Handset ringer tone In the standby mode, press ▲ or ▼ . Each time ▲ or ▼ is pressed, the ringer tone setting changes and the selected ringer tone sounds for 2 seconds. Handset earpiece volume During a telephone call, pressing ▲ or ▼ will change the earpiece volume of the handset. This setting will [...]

Memory Storing Y ou can store up to 10 phone numbers in the dial memory . Storing phone numbers and names 1 Press and hold MEMORY until a tone sounds and “ Memory Store ” is displayed. 2 Press ▲ or ▼ to scroll to the memory location where you would like to store the number . Or press the keypad ( 0 to 9 ) to select the memory location where[...]

19 4 Use the number keys to enter the name. The name cannot exceed 14 characters. • See the ”Steps for entering names and special characters“, page 20. • Use the * / t /TONE and #/ s to move the cursor to the desired position. • Use the DELETE/CHANNEL key to delete characters as needed. • Press and hold DELETE/CHANNEL to delete all the [...]

20 Memory Storing (continued) Steps for entering names and special characters Refer to the letters on the number keys to select the desired characters. With each press of a numeric key , the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key . Number [...]

21 Memory Dialing Making calls with memory dialing Dialing from standby 1 Press MEMORY . The handset displays your programmed memory locations. 2 Press the ▲ and ▼ keys to select the memory location you would like to dial. For example if the ▼ key is pressed once, the pointer moves down to the next memory location number . Or press the number[...]

22 1 Press TALK/FLASH . " Talk " and the volume setting appear on the display . 2 Press MEMORY . 3 Press the number keypad to select the memory location of the desired phone number . The selected phone number is displayed. Then the number is dialed. Dialing from talk mode Note If you select a memory location that does not have a stored nu[...]

23 Memory Editing Editing a stored name and/or phone number 1 Press and hold MEMORY until a tone sounds and “ Memory Store ” is displayed. 2 Press the ▲ or ▼ keys or number keypad to select the memory location you would like to edit. 3 Press SELECT . The following screen appears with the memory location number that you have selected in the [...]

24 Memory Erasing Erasing a stored name and phone number 1 Press and hold MEMORY until a tone sounds and “ Memory Store ” is displayed. 2 Press the ▲ or ▼ keys or number keypad to select the memory location you would like to erase. 3 Press SELECT . Example: Memory 2 is selected 4 Press ▼ to move the pointer down to “ Delete Memory ” .[...]

25 Speed Dial Feature Y ou can store your most frequently dialed number in the speed dialing location. The speed dialing allows you to dial a number with one key press. (There is no need to press T ALK/FLASH . The phone will automatically dial the number stored.) Storing and Editing the Speed Dial 1 Press and hold SPEED DIAL . The following screen [...]

26 Caller ID Features Caller ID When the telephone rings, the Caller ID feature allows you to view the caller’ s name and phone number on the display before you answer the phone. The handset displays the phone number of the incoming call, the name, time, and the number of calls. Additionally , you can dial the displayed number and store the infor[...]

27 When the telephone rings 1 When phone rings, the CHARGE/IN USE LED blinks. On the second ring, the display shows the caller’ s phone number , along with the date and time. The incoming call information is stored. If the Caller ID service includes the caller’ s name, it appears on the display (up to 15 letters). When the phone number and name[...]

28 Caller ID Features (continued) V iewing the Caller ID message list The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. 1 Press CID/MENU . The summary screen appears. When there are new messages you have received, “ New ” and the number of calls are displayed. The summary screen shows how many new calls [...]

29 Caller ID Features (continued) Deleting information from the Caller ID list Y our phone stores up to 30 Caller ID messages. If more new calls are received, messages stored in the list are deleted beginning with the oldest message in the list. Data can also be deleted manually . Deleting a Caller ID message 1 Press CID/MENU . 2 Press ▲ or ▼ t[...]

30 Using the Caller ID list Calling a party from the Caller ID list Y ou can place a call from the Caller ID list. Y our telephone stores up to 30 messages. 1 Press CID/MENU . 2 Press ▲ or ▼ to select the phone number that you want to dial. 3 Press TALK/FLASH . The displayed phone number dials automatically . Note Y ou cannot make a call from t[...]

31 Caller ID Features (continued) Using “Caller ID with Call W aiting” service “Caller ID” and “Call Waiting” are separate services. CIDCW (Caller ID on Call Waiting) performs the same as regular Caller ID on a Call W aiting number . Y ou must subscribe to the "Caller ID with Call Waiting (CIDCW)" service from your telephone c[...]

32 Additional Information Changing the digital security code The digital security code is an identification code used to connect the handset and the base unit. Normally , setting the code is not necessary . The first time you charge your handset, the security code is automatically set. (See page 8.) In the rare situation that you suspect another co[...]

33 Additional Information (continued) 1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for mounting the phone. 2 Refer to steps 1 through 5 above to mount the telephone. [Direct wall plate mounting] If you don't have a standa[...]

34 Additional Information (continued) Note on power sources Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery . With normal usage, your battery should last about one year . Please contact your place of purchase for a replacement battery . Warning: T o avoid the risk[...]

35 Additional Information (continued) T roubleshooting If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The CHARGE/IN USE LED • Make sure the AC adapter is plugged into light won't come on when the base unit and wall outlet. the handset is placed in the • Make sure the handset is[...]

36 Additional Information (continued) I.C. Notice Industrial Canada Information T erminal Equipment Notice: This equipment meets the applicable Industry Canada T erminal Equipment T echnical Specifications. This is confirmed by the registration number . The abbreviation, IC, before the registration number signifies that registration was performed b[...]

37 Index B Battery pack Preparing and charging ....................13 Replacement and handling ...............34 C Caller ID service Calling from the Caller ID list ............30 Deleting the Caller ID list ..................29 Storing the data of the Caller ID list to Memory ...................30 Viewing Caller ID message list .........28 Caller [...]

LIMITED W ARRANTY—CORDLESS TELEPHONES We at MEMOREX believe you will be pleased with your new Cordless T elephone. Please read this W arranty carefully . Memorex warrants this product to be free from manufacturing defects including original parts and workmanship for a period of one (1) year from the date of original purchase in, and if used in, t[...]

Memo MPH6935_OM Eng 3/12/02 3:08 PM Page 39[...]

©2002 Memorex Printed in China UCZZ01373BZ Covered under one or more of the following U.S. patents: 4,511,761 4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905 5,491,745 5,533,010 5,543,605 5,574,727 5,581,598 5,650,790 5,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,312 5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152[...]