Pioneer AVH-P7650DVD Bedienungsanleitung

Operation Manual 7 inch Wide Fully Motor ized LCD Color Display with 5- Channel High-P ower D VD/VCD/CD Receiver A VH-P7650D VD English[...]

Thank you for buying this P ioneer product. Please read through these operating instruct ions so you will know how to operate your model properly. A fter you have finished r eading the instr uctions, keep this man- ual in a safe place for future r eference. Be sure to read this ! Playable discs 7 ! DVD video disc region numbers 8 ! When an operatio[...]

Introduction of advanced DVD video operation 37 Repeating play 37 P ausing DVD video playback 37 F rame-by-frame playback 37 Slow motion playback 38 Searching for a desired scene, starting playback from a specified time 38 Changing audio language during playback (Multi-audio) 39 Changing the subtitle language during playback (Multi-subtitle) 39 Cha[...]

Selecting a disc 65 Introduction of advanced DVD player operation 65 Repeating play 65 P ausing disc playback 66 Playing tracks in a random order 66 Scanning tracks of a CD 66 Using ITS playlists 66 Using disc title functions 66 Audio Adjustments Introduction of audio adjustments 67 Using the equalizer 68 Using the auto-equalizer 69 Using the posit[...]

IMPORT ANT SA FEGUARDS Please read all of these instructions regarding your display and retain them for future refer- ence. 1 Read this manual fully and carefully be- fore operating your display . 2 Keep this manual handy as a reference for operating procedures and safety informa- tion. 3 Pay close attention to all warnings in this manual and follo[...]

WARNING NEVER install the rear display in a location that enables the driver to watch the DVD or TV while driving. T o avoid battery exhaustion Be sure to run the vehicle engine while using this unit. Using this unit without running the engine can result in battery drainage. WARNING Do not use with vehicles that do not feature an ACC position. Prec[...]

About this unit CAUTION ! Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids. ! This product contains a laser diode of higher class than 1. T o ensure continued safety, do not remove any covers or attempt to gain ac- cess to the [...]

DVD video disc region numbers DVD video discs that have incompatible region numbers cannot be played on this player . The region number of the player can be found on the bottom of this unit. The illustration below shows the regions and corresponding region numbers. About this manual This unit features a number of sophisticated functions ensuring su[...]

! Manufactured under license from Dolby La- boratories.  Dolby  ,  Pro Logic  , and the double-D symbol are trademarks of Dolby Laboratories. !  DTS  and  DTS Digital Surround  are regis- tered trademarks of Digital Theater Sys- tems, Inc. Multi-aspect Switching between wide screen, letterbox and panscan display is possible.[...]

Condition memory This function memorizes audio language, sub- title language, angle number and aspect ratio made during disc playback for up to 30 discs. Without any special operations, the final set- ting details during playback of a disc are mem- orized. The next time a disc is played, the previous settings are automatically applied. ! With some [...]

Note After completing connections or when you want to erase all memorized settings or return the unit to its initial (factor y) settings, switch your engine ON or set the ignition switch to ACC ON before pressing RESET . Use and care of the remote control Installing the battery Slide the tray out on the back of the remote control and insert the bat[...]

Head unit 1 DISPLA Y button Press to select differ ent displays. 2 PGM button Press to operate the preprogrammed func- tions for each source. (Refer to Using the PGM button on page 89.) 3 Ambient light sensor Senses ambient light. This system automati- cally adjusts the brightness of the display to compensate for ambient light. 4 FLIP DOWN/CLOCK bu[...]

c Joystick Move to do manual seek tuning, fast for- ward, reverse and track search controls. Also used for controlling functions. d EQ button Press to select various equalizer cur ves. e BAND/ESC button Press to select among three FM bands and one AM band and to cancel the control mode of functions. f ANGLE (+/  ) button Press to change the LCD [...]

Remote control 1 Remote control selection switch Switch to change the setting of the remote control. For details, refer to Setting remote control code type on page 81. 2 VOLUME button Press to increase or decrease the volume. 3 REAR.S button Press to switch between the video sources (such as DVD or AV ) on rear display . 4 SOURCE button This unit i[...]

b STOP ( g ) button Press to stop playback. c NEXT ( p ) button Press to go to the next track (chapter). d CLEAR button Press to cancel the input number when 0  10 are used. e 0  10 buttons Press to directly select the desired track, preset tuning or disc. Buttons 1  6 can oper- ate the preset tuning for the tuner or disc number search for[...]

% When you want to operate the follow- ing functions, switch the mode to DVD: ! When browsing still pictures by using the joystick. (Refer to Browsing still pictures on page 31.) ! When operating the DVD menu by using the joystick. (Refer to Operating the DVD menu on page 36.) ! When operating the PBC menu by using 0  10 . (Refer to Watching a V[...]

T urning the unit on and selecting a source 1 1 Source icon Shows which source has been selected. Y ou can select a source you want to listen to. If DVD AUTO PLA Y is turned on, load a disc in the unit to switch to DVD (refer to Switching the automatic disc playback on page 84). % When using the touch panel keys, touch the source icon and then touc[...]

Loading a disc % Insert a disc into the disc loading slot. Playback will automatically start. # If DVD AUTO PLA Y is turned off, touch the source icon and then touch DVD to select DVD (refer to the previous page). # When a disc is loaded in this unit, touch the source icon and then touch DVD to select DVD . # T o eject a disc, press EJECT . Notes ![...]

# When selecting FRONT SOURCE in REAR MODE , audio is not outputted from REAR OUT . (Refer to Setting the video of rear display on page 88.) # When selecting FRONT SOURCE in REAR MODE , you can select F . SOURCE only. (Refer to Setting the video of rear display on page 88.) Note In the following cases, the sound source will not change: ! When there[...]

Operating the menu 1 4 5 2 3 1 FUNCTION key T ouch to select functions for each source. 2 AUDIO key T ouch to select various sound quality con- trols. 3 SETUP key T ouch to select various setup functions. 4 BACK key T ouch to return to the previous display . 5 ESC key T ouch to cancel the control mode of func- tions. 1 T ouch A.MENU to display MENU[...]

 When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after six seconds.  When the ignition switch is turned ON again (or turned to ACC), the LCD panel will be opened automatically .  Removing or attaching the front panel will automatically close or open the LCD panel. (Refer to page 23.) ! When th[...]

JUST (just) The picture is enlarged slightly at the center and the amount of enlargement increases horizontally to the ends, enabling you to enjoy a 4:3 picture without sensing any disparity even on a wide screen. CINEMA (cinema) The picture is enlarged by the same proportion as FULL or ZOOM in the horizontal direction and by an intermediate propor[...]

# With some rear view cameras, picture adjust- ment may not be possible. 3 T ouch c or d to adjust the selected item. Each time you touch c or d it increases or de- creases the level of selected item. +24   24 is displayed as the level is increased or de- creased. 4 T ouch ESC to hide the touch panel keys. Adjusting the dimmer The adjustment [...]

Removing the front panel 1 Press DET ACH to remove the front panel. Press DET ACH and the right side of the front panel is removed from the head unit. 2 Gently grip the right side of the front panel and slowly pull it outward. T ake care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to [...]

Listening to the radio 1 2 3 4 5 7 6 These are the basic steps necessar y to operate the radio. More advanced tuner operation is explained starting on the next page. Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 83). 1 Source icon Shows which source has been[...]

Introduction of advanc ed tuner operation 1 1 Function display Shows the function names. % T ouch A.MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. # When A.MENU is not displayed, you can dis- play it by touching the screen. # Y ou can also display MENU by clicking th[...]

3 T ouch c or d to set the sensitivity . There are four levels of sensitivity for FM and two levels for AM: FM: LEVEL 1  LEVEL 2  LEVEL 3  LEVEL 4 AM: LEVEL 1  LEVEL 2 The LEVEL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. Storing the strongest broadcast f[...]

Listening to a DVD audio 1 4 5 2 6 3 7 These are the basic steps necessar y to play a DVD audio with your DVD player . More ad- vanced DVD audio operation is explained starting on page 30. 1 Source icon Shows which source has been selected. 2 DVD-A indicator Shows when a DVD audio is playing. 3 Group number indicator Shows the group currently playi[...]

Notes ! Y ou can display the repeat range selected cur- rently by touching DISP . ! If you do not use the touch panel keys within 30 seconds, they will be hidden auto- matically . Operating the DVD menu Some DVDs allow you to select from the disc contents using a menu. ! Y ou can display the menu by touching MENU or TOP .M while a disc is playing. [...]

Introduction of advanc ed DVD audio operation 1 1 Function display Shows the function names. % T ouch A.MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. # When A.MENU is not displayed, you can dis- play it by touching the screen. # Y ou can also display MENU by clickin[...]

3 When you find the desired track touch b to tur n scan play off. Note After scanning is finished, normal playback of the tracks will begin again. Pausing DVD audio playback P ause lets you temporarily stop disc playback. % T ouch f during playback. The icon e is displayed for four seconds and playback is paused. # T o resume playback at the same p[...]

Slow motion playback This lets you slow down playback speed. ! This function can be operated only on the moving picture parts of DVD audio disc. 1 Keep touching r until   is displayed during playback. The icon   is displayed, for ward slow moti on playback begins. # T o return to normal playback, touch f . 2 Press q or r to adjust playb[...]

Changing audio language during playback (Multi-audio) DVDs can provide audio playback with differ- ent languages and different systems (Dolby Di- gital, DTS etc.). With DVDs featuring multi- audio recordings, you can switch between lan- guages/audio systems during playback. % T ouch AUDIO during playback. Each time you touch AUDIO it switches be- t[...]

Notes ! The 3 mark on a DVD  s package indicates it features multi-angle scenes. The number in the 3 mark indicates the number of angles from which scenes were shot. ! T ouching ANGLE during fast for ward/fast re- verse, pause or slow motion playback returns you to normal playback. Using the dynamic range control The dynamic range refers to the [...]

W atchi ng a DVD video 1 3 4 5 6 2 7 8 These are the basic steps necessar y to play a DVD video with your DVD player . More ad- vanced DVD video operation is explained start- ing on page 37. 1 Source icon Shows which source has been selected. 2 DVD-V indicator Shows when a DVD video is playing. 3 Title number indicator Shows the title currently pla[...]

# F ast for ward/fast reverse may not be possible at certain locations on some discs. If this hap- pens, normal playback automatically resumes. Notes ! Y ou can display the repeat range selected cur- rently by touching DISP . ! If you do not use the touch panel keys within 30 seconds, they will be hidden auto- matically . Operating the DVD menu Som[...]

Introduction of advanc ed DVD video operation 1 1 Function display Shows the function names. % T ouch A.MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. # When A.MENU is not displayed, you can dis- play it by touching the screen. # Y ou can also display MENU by clickin[...]

% T ouch r during playback. Each time you touch r , you move ahead one frame. # T o return to normal playback, touch f . Notes ! Depending on the disc and the playback loca- tion on the disc, the icon may be displayed, indicating that frame-by-frame playback is not possible. ! With some discs, images may be unclear dur- ing frame-by-frame playback.[...]

! With some discs, the icon may be dis- played, indicating that titles, chapters and time cannot be specified. Specifying title Y ou can use the direct search function to search for a desired scene by specifying a title. ! Only the remote control can operate this function. T o per form this function, switch the remote control operation mode to DVD [...]

Changing the viewing angle during playback (Multi-angle) With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can switch among viewing angles during play- back. ! During playback of a scene shot from mul- tiple angles, the angle icon is dis- played. T urn angle icon display on or off using DVD SETUP MENU . For details,[...]

W atchi ng a Video CD 1 3 4 2 5 These are the basic steps necessar y to play a Video CD with your DVD player . More ad- vanced Video CD operation is explained start- ing on page 43. 1 Source icon Shows which source has been selected. 2 VideoCD indicator Shows when a Video CD is playing. 3 T rack number indicator Shows the track currently playing. 4[...]

6 T o perform fast forward or reverse, keep touching m or n . If you keep touching m or n for five sec- onds, the icon m or n changes into rever- sal indication. When this happens, fast reverse/fast for ward continues even if you re- lease m or n . T o resume playback at a de- sired point, touch f . # Y ou can also perform fast reverse/fast forward[...]

Introduction of advanc ed Video CD operation 1 1 Function display Shows the function names. % T ouch A.MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. # When A.MENU is not displayed, you can dis- play it by touching the screen. # Y ou can also display MENU by clicking[...]

Frame-by-frame playback This lets you move ahead one frame at a time during playback. % T ouch r during playback. Each time you touch r , you move ahead one frame. # T o return to normal playback, touch f . Notes ! Depending on the disc and the playback loca- tion on the disc, the icon may be displayed, indicating that frame-by-frame playback is no[...]

Note Y ou can also perform the same operations using SEARCH . T o display SEARCH , touch A.MENU and then touch FUNCTION . Specifying track Y ou can use the direct search function to play a disc without using a menu (without PBC playback). ! Only the remote control can operate this function. T o per form this function, switch the remote control oper[...]

Listening to a CD 1 3 4 2 5 These are the basic steps necessar y to play a CD with your DVD player . More advanced CD operation is explained starting on the next page. 1 Source icon Shows which source has been selected. 2 CD indicator Shows when a CD is playing. 3 T rack number indicator Shows the track currently playing. 4 Play time indicator Show[...]

Introduction of advanc ed CD operation 1 1 Function display Shows the function names. % T ouch A.MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. # When A.MENU is not displayed, you can dis- play it by touching the screen. # Y ou can also display MENU by clicking the j[...]

2 T ouch a to turn scan play on. The first 10 seconds of each track is played. 3 When you find the desired track touch b to tur n scan play off. Note After scanning of a CD is finished, normal play- back of the tracks will begin again. Pausing CD playback P ause lets you temporarily stop disc playback. % T ouch f during playback. The icon e is disp[...]

7 T ouch OK to store the entered title in memory . # Y ou can also store the entered title in memor y by moving the cursor to right until it disappears. 8 T ouch ESC to return to the playback dis- play . Notes ! Titles remain in memor y , even after the disc has been removed from the unit, and are re- called when the disc is reinserted. ! Titles ar[...]

Listening to MP3 1 4 5 2 6 3 These are the basic steps necessar y to play an MP3 with your DVD player . More advanced MP3 operation is explained starting on the next page. 1 Source icon Shows which source has been selected. 2 MP3 indicator Shows when the MP3 file is playing. 3 Folder number indicator Shows the number of folder currently play- ing. [...]

Notes ! When playing discs with MP3 files and audio data (CD-DA) such as CD- EXTRA and MIXED- MODE CDs, both types can be played only by switching mode between MP3 and CD-DA by touching DA<>MP3 or pressing BAND/ESC . ! If you have switched between playback of MP3 files and audio data (CD-DA), playback starts at the first track on the disc. ! [...]

Repeating play F or MP3 playback, there are three repeat play ranges: FOLDER (folder repeat), TRACK (one- track repeat) and DISC (repeat all tracks). 1 T ouch A.MENU and FUNCTION and then touch REPEA T. 2 T ouch any of the following touch panel keys to select the repeat range. ! DISC  Repeat all tracks ! FOLDER  Repeat the current folder ! TR[...]

Note Y ou can also turn pause function on or off using P AUSE . T o display P AUSE , touch A.MENU and then touch FUNCTION . Displaying text information on MP3 discs T ext information recorded on a MP3 discs can be displayed. % T ouch DISP. T ouch DISP repeatedly to switch between the following settings: FolderName (folder name)  FileName (file n[...]

Listening to a CD 1 3 4 2 5 Y ou can use this unit to control a multi-CD player , which is sold separately . These are the basic steps necessar y to play a CD with your multi-CD player . More advanced CD operation is explained starting on the next page. 1 Source icon Shows which source has been selected. 2 Disc number indicator Shows the disc curre[...]

Introduction of advanc ed multi-CD player operation 1 1 Function display Shows the function names. % T ouch A.MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. # When A.MENU is not displayed, you can dis- play it by touching the screen. # Y ou can also display MENU by c[...]

# T o turn random play off , touch b . Scanning CDs and tracks While you are using DISC REPEA T , the begin- ning of each track on the selected disc plays for about 10 seconds. When you are using MUL TI-CD REPEA T , the beginning of the first track of each disc is played for about 10 sec- onds. 1 Select the repeat range . Refer to Repeating play on[...]

Playback from your ITS playlist ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play , tracks from your ITS playlist in the multi- CD player will begin to play . 1 Select the repeat range . Refer to Repeating play on page 55. 2 T ouch A.MENU and FUNCTION and then touch NEXT. 3 T ouch ITS PLA[...]

Using disc title functions Y ou can input CD titles and display the titles. Then you can easily search for and play a de- sired disc. Entering disc titles Use the disc title input feature to store up to 100 CD titles (with ITS playlist) into the multi- CD player . Each title can be up to 20 charac- ters long. ! With multi-CD players sold before the[...]

Displaying disc titles Y ou can display the title of any disc that has had a disc title entered. % T ouch DISP. T ouch DISP repeatedly to switch between the following settings: DISC LIST (disc list)  DiscTitle (disc title) When you select DiscTitle , the title of the cur- rently playing disc is shown in the display. # If no title has been entere[...]

1 T ouch A.MENU and FUNCTION and then touch COMPRESSION. # If the multi-CD player does not support COMP/DBE, NO COMPRESSION is displayed when you attempt to select it. 2 T ouch ab to select your favorite set- ting. T ouch ab repeatedly to switch between the following settings: OFF  COMP1  COMP2  OFF  DBE1  DBE2 # Y ou can also select[...]

W atchi ng the television 1 2 3 4 5 Y ou can use this unit to control a TV tuner , which is sold separately . F or details concerning operation, refer to the TV tuner  s operation manuals. This section provides information on TV operations with this unit which differs from that described in the TV tuner  s operation manual. 1 Source icon Show[...]

Introduction of advanc ed TV tuner operation 1 1 Function display Shows the function names. % T ouch A.MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. # When A.MENU is not displayed, you can dis- play it by touching the screen. # Y ou can also display MENU by clicking[...]

Note Storing broadcast stations with BSSM may re- place broadcast stations you have saved using P1  P12 . Selecting the country group ! This function can be operated only when connecting a TV tuner (e.g. GEX-P6450TVP) featuring the country setting. 1 T ouch A.MENU and FUNCTION and then touch COUNTRY. 2 T ouch c or d to select the country group. [...]

Playing a disc 1 3 5 2 6 4 7 Y ou can use this unit to control a DVD player or multi-DVD player , which is sold separately . F or details concerning operation, refer to the DVD player  s or multi-DVD player  s operation manual. This section provides information on DVD operations with this unit which differs from that described in the DVD play[...]

T urning the DVD player on or off ! Only the remote control can operate this function. T o per form this function, switch the remote control operation mode to DVD . (Refer to page 15.) % Press REAR.S to turn the DVD player on. # T o turn the DVD player off, press REAR.S again. Selecting a disc ! Y ou can operate this function only when a multi-DVD [...]

2 T ouch j to select the repeat range. During DVD video playback ! DISC REPEA T  Repeat the current disc ! CHAPTER REPEA T  Repeat just the current chapter ! TITLE REPEA T  Repeat just the current title During Video CD or CD playback ! DISC REPEA T  Repeat the current disc ! TRACK REPEA T  Repeat just the current track Notes ! If you[...]

Introduction of audio adjustments By carr ying out the follo wing settings/adjust- ments in the order shown, you can create a fi- nely-tuned sound field effortlessly. 1 Using the position selector 2 Selecting a cut- off fr equency 3 Auto T A and EQ (auto-time alignment and auto- equalizing) Operating the audio menu 1 1 Audio display Shows the audio[...]

About speaker settings 1 2 3 4 1 Center speaker 2 Front speaker 3 Rear speaker 4 Subwoofer Note When selecting SP LEVEL , T est T one or Time Alignment , L/R speaker adjustments for the front and rear can be adjusted separately . Using the equalizer The equalizer lets you adjust the equalization to match car interior acoustic characteristics as des[...]

! The center speaker largely determines the sound image and getting the balance right isn  t easy . W e recommend reproducing a 2- ch. audio (a CD for example) and getting the balance right among the speakers ex- cept for the center , and then reproducing a 5.1-ch. audio (Dolby Digital or DTS) and ad- justing the center speaker output to the bal[...]

Using the position selector One way to assure a more natural sound is to accurately position the stereo image, putting you right in the center of the sound field. The position selector function lets you automati- cally adjust the speaker output levels and in- serts a delay time to match the number and position of occupied seats. 1 T ouch A.MENU and[...]

+8dB   8dB is displayed as the source vo- lume is increased or decreased. Notes ! The AM tuner volume level can also be ad- justed with source level adjustments. ! Video CD, CD and MP3 are set to the same source level adjustment volume automatically . ! DVD and the optional DVD player are set to the same source level adjustment volume automat[...]

3 T ouch P ANORAMA and then touch d to turn the Panorama control on. # T o turn the P anorama control off , touch c . 4 T ouch DIMENSION and then touch c or d to adjust front/surround speaker bal- ance. Each time you touch c or d it moves the sound towards the front or the surrounds. +3   3 is displayed as the front/surround speaker balance m[...]

Selecting a cut-off frequency Y ou can select a frequency, under which sounds are reproduced through the subwoo - fer . If the installed speakers include one whose size has been set to SMALL , you can select a frequency , under which sounds are repro- duced through a LARGE speaker or subwoo- fer . 1 T ouch A.MENU and AUDIO and then touch Sound Sett[...]

3 T ouch a or b to adjust the speaker out- put level. Each time you touch a or b it increases or de- creases the speaker output level. +10   10 is displayed as the level is increased or de- creased. # The test tone rotates to the next speaker af ter about two seconds from the last operation. 4 T ouch BACK to stop the test tone out- put. Notes[...]

Auto T A an d EQ (auto-time alignment and auto- equalizing) The auto-time alignment is automatically ad- justed for the distance between each speaker and the listening position. The auto-equalizer automatically measures the car interior acoustic characteristics, and then creates the auto -equalizer cur ve based on that information. WARNING T o prev[...]

! Auto T A and EQ changes the audio settings as below:  The fader/balance settings return to the center position. (Refer to page 70.)  The equalizer curve switches to FLA T . (Refer to page 68.)  It will be adjusted automatically to high pass filter setting for front, center and rear speaker . ! If you carry out auto T A and EQ when a pre-[...]

# T o cancel auto T A and EQ part way through, touch BACK or ESC . 10 When auto T A and EQ is completed, Complete is displayed. When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Under- standing auto T A and EQ error messages on page 93.) 11 T ouch ESC to cancel the auto T A a[...]

Introduction of DVD setup adjustments 1 Y ou can use this menu to change audio, subti- tle, parental lock and other DVD settings. ! When watching a DVD/Video CD on the rear display independently, you cannot op- erate this menu . 1 DVD setup menu display Shows the DVD setup menu names. 1 T ouch g . SETUP will be displayed instead of MENU . 2 T ouch [...]

When you select OTHERS When you select OTHERS , a language code input display is shown. Refer to Language code chart for D VD on page 98 to input the four-dig it code of the desired language. 1 T ouch 0  9 to input the language code. # T o cancel the inputted numbers, touch C . # Y ou can also input the desired number by using the joystick and 0[...]

2 T ouch ASSIST SUB TITLE. 3 T ouch a to turn assist subtitles on. # T o turn assist subtitles off, touch b . Setting angle icon display Y ou can set it up so that the angle icon ap- pears on scenes where the angle can be switched. 1 T ouch SETUP and VISUAL and then touch MUL TI ANGLE. 2 T ouch a to turn angle icon display on. # T o turn angle icon[...]

4 T ouch c or d to select the desired level. The parental lock level is set. ! 8  Playback of the entire disc is possible (initial setting) ! 7  2  Playback of discs for children and non-adult-oriented discs is possible ! 1  Playback of discs for children only is possible Notes ! W e recommend to keep a record of your code number in cas[...]

1 Set the re mote control selection switch on the left side of the remote control to the appropriate position with a pen tip or other pointed instrument . ! If you select AV H mode, there is no need to take the following procedure. ! If you select A / B mode, take the following procedure and change the code type to the appropriate type. 2 Press 7 a[...]

Adjusting initial settings 1 Initial settings lets you perform initial setup of different settings for this unit. 1 Function display Shows the function names. 1 T ouch the source icon and then touch OFF to tur n this unit off. # When the source icon is not displayed, you can display it by touching the screen. 2 T ouch A.MENU and then touch INITIAL [...]

Switching the war ning tone If the front panel is not detached from the head unit within five seconds of turni ng off the ignition, a warning tone will sound. Y ou can turn off the warning tone. 1 T ouch A.MENU and INITIAL and then touch DET ACH W ARNING. 2 T ouch a to turn warning tone on. # T o turn warning tone off , touch b . Switching the auxi[...]

2 T ouch DVD AUTO PLA Y. 3 T ouch a to turn automatic disc play- back on. # T o turn automatic disc playback off , touch b . Switching the dimmer setting for sub-display T o prevent the sub-display from being too bright at night, the sub-display is automati- cally dimmed when the car  s headlights are turned on. Y ou can turn dimmer on or off . [...]

Introduction of setup adjustments 1 1 Setup menu display Shows the setup function names. % T ouch A.MENU and then touch SETUP to display the setup function names. The setup function names are displayed and operable ones are highlighted. # When A.MENU is not displayed, you can dis- play it by touching the screen. # Y ou can also display MENU by clic[...]

2 T ouch a to turn rear view camera set- ting on. # T o turn rear view camera setting off , touch b . 3 T ouch c or d to select an appropriate setting for polarity . Each time you touch c or d it switches be- tween the following polarity : ! BA TTER Y  When the polarity of the con- nected lead is positive while the gear shif t is in REVERSE (R) [...]

Adjusting the LCD panel slide position Y ou can adjust the LCD panel slide position so that the panel is set back or forward. 1 T ouch A.MENU and SETUP and then touch FLAP SET BACK. 2 T ouch a and the LCD panel slides to the back. # T ouch b and the LCD panel slides to the front. Setting the video of rear display Y ou can select either showing the [...]

3 T ouch a or b to select a letter of the al- phabet. Each time you touch a it will display a letter of the alphabet in A B C ... X Y Z , numbers and symbols in 1 2 3 ... | } ¯ order . Each time you touch b it will display a letter in the reverse order , such as Z Y X ... C B A . 4 T ouch d to move the cursor to the next character position. When t[...]

T roubleshooting Common Symptom Cause Action (See) P ower doesn  t turn on. The unit doesn  t operate. Leads and connecto rs are incor- rectly connected. Confirm once mor e that all connections are correct. The fuse is blown. Rectify the reason for the fuse blowing, then replace the fuse. Be ver y sure to install the correct fuse with the sam[...]

Symptom Cause Action (See) The icon is displayed, and op- eration is not possible. The operation is prohibited for the disc. This operation is not possible. The operation is not compatible with the disc  s organization. This operation is not possible. The picture stops (pauses) and the unit cannot be operated. Reading of data has become impos- s[...]

Symptom Cause Action (See) Switching the viewing angle is not possible. The DVD playing does not feature scenes shot from multiple angles. Y ou cann ot switch between multiple angles if the DVD does not feature scenes reco rded from multiple angles. Y ou are tr ying to switch to multiple angle viewing of a scene that is not recorded from multiple a[...]

Understanding auto T A and EQ error messages When correct measurement of car interior acoustic characteristics is not possible using the auto T A and EQ, an error message may appear on the display . If an error message appears, refer to the table below to see what the problem is and the suggested method of correcting t he problem. Af ter checking, [...]

DVD player and care ! Use only normal, round discs. If you insert irregular , non-round, shaped discs they may jam in the DVD player or not play prop- erly . ! Check all discs for cracks, scratches or warping before playing. Discs that have cracks, scratches or are warped may not play properly. Do not use such discs. ! Avoid touching the recorded ([...]

! Playback of discs recorded on a personal computer may not be possible, depending on the application settings and the environ- ment. Please record with the correct for- mat. (For details, contact the manufacturer of the application.) ! Playback of CD-R/C D-RW discs may be- come impossible in case of direct exposure to sunlight, high temperatures, [...]

! This unit plays back files with the filename ex- tension (.mp3) as an MP3 file. T o prevent noise and malfunctions, do not use this exten- sion for files other than MP3 files. About folders and MP3 files ! An outline of a CD-ROM with MP3 files on it is shown below . Subfolders are shown as folders in the folder currently selected. 3 1 2 1 First l[...]

! The display should be used within the tem- perature ranges shown below . Storage temperature range:  20 to +80 °C At temperatures higher or lower than the operating temperature range the display may not operate normally. ! The LCD screen of this unit is exposed in order to increase its visibility within the ve- hicle. Please do not press stro[...]

Language code chart for DVD Language (code), input code Language (code), input code Language (code), input code Japanese (ja), 1001 Guarani (gn), 0714 P ashto, P ushto (ps), 1619 English (en), 0514 Gujarati (gu), 0721 Quechua (qu), 1721 F rench (fr), 0618 Hausa (ha), 0801 Rhaeto-Romance (rm), 1813 Spanish (es), 0519 Hindi (hi), 0809 Kirundi (rn), 1[...]

T erms Aspect ratio This is the width-to-height ratio of a TV screen. A regular display has an aspect ratio of 4:3. Wide screen displays have an aspect ratio of 16:9, providing a bigger picture for exceptional presence and atmosphere. Bit rate This expresses data volume per second, or bps units (bits per second). The higher the rate, the more infor[...]

Level 2: The file name can have up to 31 characters (in- cluding the separation mark  .  and a file ex- tension). Each folder contains less than 8 hierarchies. Extended formats Joliet: File names can have up to 64 characters. Romeo: File names can have up to 128 charac ters. Linear PCM (LPCM)/Pulse code modulation This stands for linear pulse[...]

Playback control (PBC) This is a playback control signal recorded on Video CDs (Version 2.0). Using menu displays provided by Video CDs with PBC lets you enjoy playback of simple interactive software and software with search functions. Y ou can also enjoy viewing high- and standard-resolution still images. Region number DVD players and DVD discs fe[...]

Specifications General Rated power source ............... 1 4 . 4 V DC (allowable voltage range: 12.0  14.4 V DC) Grounding system ................... Negative type Head unit: Max. current consu mption ........................................... 1 0 . 0 A Dimensions (W × H × D): DIN Chassis ..................... 17 8 × 5 0 × 1 6 0 m m Nose .[...]

50 dB quieting sensiti vity ..... 1 0 dB f ( 0 . 9 µ V / 7 5 W , mono) Signal-to-noise ratio ............... 7 5 d B (I E C - A network) D i s t o r ti o n ..................................... 0 . 3 % (a t 6 5 d B f, 1 kHz, stereo) 0.1 % (at 65 dBf , 1 kHz, mono) F requency response ............... 3 0  15,00 0 Hz (±3 dB) Stereo separation ..[...]

A Angle icon ........................................... . 33, . 40, . 80 Aspect ratio .............................................. . 80, . 99 Audio language .................................. . 33, . 39, . 79 B Bonus group .......................... ......................... . 99 Brightness .......................................................[...]

PIONEER CORPORA TION 4-1, MEGURO 1-CHOME, MEGURO-KU , T OKY O 153-8654, JAP AN PIONEER ELECTRONICS (USA) INC. P .O . Box 1540, Long Beach, California 90801-1540, U .S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. L TD. 253 Alexandra Road, #04-01,[...]