Samsung SCC-C6407 Bedienungsanleitung

P ar t : AB68-00600A(00) Printed in China SCC-C6407 E F Es J Smar tDome Camera Owner’ s Instr uctions Manuel d’instruction Manual del usuario 00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 1[...]

E Impor tant Saf ety Instructions Safety Precautions The purpose of this information is to ensure proper use of this product to prevent danger or damage to property. Please be sure to observe all precautions. * The precautions are divided into "Warnings" and "Cautions" as distinguished below: Warning: Ignoring this warning may r[...]

6. Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Doing so may cause personal injury due to fire, electrical shock, or falling objects.) 7. Do not install the unit in humid, dusty, or sooty positions. (Doing so may cause fire or electrical shock.) 8. If any unusua[...]

1-2 E 1-1 Bef ore Usage This is a basic instruction manual f or the SCC-C6407 user . It contains all the instructions needed to use the SCC-C6407 from a simple introduction of the control positions and functions of the SCC-C6407 to installation methods in the set up menu. W e recommend all users of the SCC-C6407 from the advanced user who has used [...]

1-4 E 1-3 4. ZONE SET ..................................................................................3-19 - PRIVACY ZONE .......................................................................3-19 - STYLE ....................................................................................3-19 - BLANK ALL ABOVE....................................[...]

1-6 E 1-5 SCC-C6407 Introduction SCC-C6407 is a zoom lens b uilt in smar t dome camera which provides y ou with the best monitor ing function in connection with CCTV at banks or companies. The SCC-C6407 is a high quality sur v eillance camera using x32 zoom lens and digital z oom IC, it can catch clear images up to 320 times. SCC-C6407 has a v ar i[...]

1-8 E 1-7 BA CK Locations of Control FRONT 00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘ ` 1-7[...]

1-10 E 1-9 INITIAL SETTING CAMERA ADDRESS SETUP Use SW701, SW702, or 703 for Camera Address setup. You may allocate up to 255 addresses by using SW701 to set the 3rd digit, SW702 the 2nd digit, and SW703 the 1st digit. EX) In case of Camera Address 1, see the following figure for setup. Setting communication Protocol Use number 1~4 PIN of SW704 to [...]

2-1 E 1-11 Setting RS-422A/RS-485 termination As it is shown in the structure map, when Controller and RS-422A/RS- 485 is connected it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest. <RS-4[...]

To install and use the SCC-C6407, the following cables should be prepared. P ower Adapter Cable The cable that plugs into the SCC-C6407 power input receptacle has the rated voltage of AC24V, 1.5A. Check the rated voltage before using the cable. Video Cable The SCC-C6407's cable is a BNC Cable for connecting the video-output terminal to the vid[...]

Installing SCC-C6407 Installation Precautions 1) Make sure that the installation site can sufficiently support a minimum of four times the net weight of the SCC-C6407 SmartDome Camera and other accessories. 2) Install in an area where the space above the ceiling board is over 18 cm (7 in.) high. 3) Use the supplied screws to fasten the camera to th[...]

5) CEILING MOUNT ADAPTOR (SADT-100CM) This adaptor is used for installing the indoor housing or the outdoor housing for the SmartDome Camera to a concrete ceiling. 6) POLE MOUNT ADAPTOR (SADT-100PM) This adaptor is used for installing the WALL MOUNT ADAPTOR (SADT-100WM) to a pole that is over 8 cm (2.76 in.) in diameter. 3) INDOOR HOUSING (SHG-120)[...]

2-9 E 2-8 7. [Figure 7] Match the 3 holes on the back of the CAMERA and the CONNECTOR and turn it left about 15 degrees. (Check the sound of LOCKING and that the LEVER-LOCKING is in place) * Use the screws (BH M3 x L8) to connect the CAMERA and the ADAPTER so they don't move. [Figure 7] 8. [Figure 8] Assemble the COVER-BODY onto the DOME. [Fig[...]

3-2 E 3-1 Structure of the Setup Menu In this chapter , we will look o ver the Setup Menu of the SCC-C6407, First we'll look o ver the ov erall structure of the Setup Menu, and then we'll look at the functions of each men u. Chapter 3 Setup Menu Overview CAMERA SET CAMERA ID ON.../OFF V-SYNC INT/LINE... COLOR/BW COLOR.../BW.../AUTO... MOT[...]

3-3 3-4 E 1. CAMERA SET MENU CAMERA ID The CAMERA ID menu assigns an ID to the SCC-C6407 to be displayed on the connected monitor.On the CAMERA SET menu screen, select CAMERA ID to ON and press [Enter]. You will see the sub screen for deciding on the ID of the SCC-C6407. The Camera ID can have up to 20 alphanumeric characters, along with several sp[...]

3-5 3-6 E COLOR/BW In the COLOR/BW menu, you can switch ON or OFF the IR (infrared) Filter. In a poor illumination environment, the IR filter is turned off in the BW mode the its sensitivity increases as high as a black and white camera. On the other hand, the IR filter is turned on and the sensitivity decreases in the COLOR mode. COLOR : The IR Fi[...]

3-8 E 3-7 ➜ Press [Enter] (CAMERA SET) CAMERA ID OFF V-SYNC INT COLOR/BW AUTO... MOTION DET OFF ZOOM SPEED 3 DIGITAL ZOOM OFF DISPLAY ZOOM OFF DISPLAY P/T OFF EXIT QUIT ❈ In AUTO mode, AGC will be displayed as “ --- “ . You can ’ t adjust the settings manually. Caution : If you use an infrared light source while in AUTO mode, AUTO switchi[...]

3-10 E EXIT The EXIT menu is used to quit the CAMERA SET menu of the SCC-C6407 and return to the MAIN MENU. - QUIT : Ignores the changed information and restores the saved information. - SAVE : Saves the information of the setting condition of the menu. - PRESET : Ignores the changed information and restores the initial factory defaults of the menu[...]

3-12 E 3-11 SHUTTER You may designate both the fast electronic shutter speed and low electronic shutter speed in the SHUTTER menu. The fast electronic shutter supports 7 shutter speeds from 1/100(1/120) to 1/10K second to be used for the bright and fast video image. The AUTO slow electronic shutter supports 10 shutter speeds from x2 to x160 and set[...]

3-14 E 3-13 WHITE B AL Lights are generally denoted as color temperatures and expressed in Kelvin ( K ) units. The general light color temperatures are shown below. Blue sky Rainy Cloudy Partly Cloudy Sunny Fluorescent lamp Tungsten lamp Candlelight Halogen lamp 1000K 2000K 3000K 4000K 5000K 6000K 7000K 8000K 9000K 10000K (VIDEO SET) IRIS ALC... SH[...]

3-16 E 3-15 FOCUS MODE In the FOCUS MODE MENU, the Focus method can be set to ONEAF(One Auto Focus), or MF(Manual Focus). - ONEAF : In the ONEAF mode, it automatically sets the focus after the zoom moves, and operates as the same in the MF mode if the zoom does not move. - MF : In MANUAL FOCUS MODE the user adjusts the Focus manually. Use the left/[...]

3-18 E 3-17 POSITION SET From "POSITION SET..." press [ENTER] to get into the PAN/TILT, FOCUS/ZOOM SET screen to set the PAN/TILT location and FOCUS/ZOOM condition then press [ENTER] to return to a higher menu. PRESET ID This is the ID set up function for each PRESET. It can be set up to 12 characters using the left, right, up, and down k[...]

3-20 E 3-19 BLANK ALL BELO W The available angle for setup ranges from OFF/0/-10 to -90 and the area below a set angle will be regarded as the ZONE area. PRIV A CY ZONE MAP Press [ENTER] to enter the PRIVACY ZONE MAP screen from “ PRIVACY ZONE MAP ON.. ” . Select a privacy zone number and press [ENTER] from the PRIVACY ZONE MAP screen to enter [...]

3-22 E 3-21 REVERSE The REVERSE function applies PRIVACY MASK to the other area than set as a privacy zone. ON/OFF is available. ZONE DIR SET/ZONE AREA SET This function indicates the ID or direction depending on the set value when PAN of SCC-C6407 is located in a specific area. If set to AREA, it indicates the ID of the selected area and if set to[...]

3-24 E 3-23 LOCA TION The “ LOCATION... ” menu designates the left/right LIMIT positions of ZONE AREA. Enter the setup screen to move PAN, then select a start location and press [ENTER]. Move PAN again to select a end location and press [ENTER]. Now, ZONE AREA setup is complete. ➜ Press [Enter] After PAN control, press [ENTER] to finish. SET [...]

3-26 E 3-25 DIRECTION This sets up the movement direction of the START to END location (PAN location standard) "RIGHT " : "LEFT " : ENDLESS This is a 360-degree rotation function that stops for the DWELL TIME only in the START and END positions without running between the START and END positions. It can be set to "ON" [...]

3-28 E 3-27 A UT O PLA Y AUTO PLAY executes SCAN, AUTO PAN, PATTERN, and PRESET when there is no camera action after AUTO RETURN finishes. A UT O RETURN This menu sets up the time during which AUTO PLAY repeats. A UT O PLA Y This function sets up the motion which will be repeatedly performed by SCC-C6407 whenever the time set by AUTO RETURN elapses[...]

3-30 E 3-29 7. O THER SET PROPOR TIONAL P/T This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual operation of PAN/TILT. If you set PROPORTIONAL P/T to ON, the PAN/TILT speed will increase in the ZOOM WIDE mode and decrease in the ZOON TELE mode even in the same manual operation. A UT O SET This menu designates[...]

3-32 E 3-31 ➜ Press [Enter] * * MAIN MENU * * CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO... 8. SYSTEM INFO This menu allows you to check S/W version, communication protocol, baud rate, and address of SCC-C6407. Press UP/DOWN/LEFT/RIGHT key to locate the cursor on a number and press [ENTER] f[...]

3-34 E 3-33 * SCC-C6407 has two FANs inside for preventing overheating. If FAN doesn't work properly, messages below will be displayed. In those case, replace the FAN. - CAMERA FAN ERROR ! : This message is displayed when the FAN which is connected with camera of SCC-C6407 does not work properly. - ALARM FAN ERROR ! : This message is displayed[...]

3-35 Pr oduct specifications SCC-C6407 Contents - Zoom lens single body WDR SmartDome CAMERA - AC 24 ± 10% (60Hz ± 0.3Hz) - 22W - NTSC STANDARD COLOR SYSTEM - 1/4 inch WDR compatible Exview HAD CCD - 768(H) x 494(V) - 525 Lines, 2:1 Interlace - Horizontal : 15, 734 Hz(INT) / 15, 750 Hz(L/L) - Vertical : 59, 94 Hz(INT) / 60 Hz(L/L) - INT/LINE LOCK[...]