Samsung SNV-7082 Bedienungsanleitung

NETWORK CAMERA User Manual SNB-7002/SND-7082/ SND-7082F/SNV-7082[...]

Copyright ©201 2 Sa ms un g Techw in Co ., Lt d. A ll r igh ts r es er ve d. Tr a d e m a r k is the r egis tere d logo o f Sam sung Tech win C o., Ltd. The n ame of t his pr oduc t is th e regis tere d tra dema rk of S amsu ng Techwi n Co., Lt d. Oth er tr adem ark s ment ione d in thi s manua l are th e regi ster ed tra dema rk of t heir re spe [...]

English _3 ● OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufactur er’ s instructions. 8. Do not i[...]

over view 4_ overview W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be pl[...]

English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Danger of explosion if battery is incorrectly replaced. R[...]

over view 6_ overview Please read the following recommend safety precautions carefully.  Do not place this apparatus on an uneven surface.  Do not install on a surface where it is exposed to dir ect sunlight, near heating equipment or heavy cold area.  Do not place this apparatus near conductive material.  Do not attempt to service this[...]

English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Features 10 Recomended PC Specifications 10 Recomended SD/SDHC Memory Card Specifications 11 What’ s Included 14 At a Glance (SNB-7002) 18 At a Glance (SND-7082) 22 At a Glance (SND-7082F) 25 At a Glance (SNV -7082) INST ALLA TION & CONNECTION 28 28 Mounting[...]

over view 8_ overview SETUP SCREEN 75 75 Setup 75 Video & Audio Setup 91 Network Setup 100 Event Setup 116 System Setup APPENDIX 123 123 Specification 129 Product Overview 133 T roubleshooting 135 Open Source Announcement WEB VIEWER 63 63 Connecting to the Camera 64 Login 65 Installing Silverlight Runtime 69 Installing STW W ebViewer Plugin 70 [...]

English _9 ● OVERVIEW PRODUCT FEA TURES • Full HD Video Quality • Multi-Streaming This network camera can display videos in differ ent resolutions and qualities simultaneously using differ ent CODECs. • W eb Browser -based Monitoring Using the Internet web browser to display the image in a local network environment. • Alarm If an event oc[...]

over view 10_ overview RECOMENDED PC SPECIFICA TIONS • CPU : Intel Core 2 Duo 2.4GHz or higher • Operating System : Windows XP , VIST A, 7, Mac OS • Resolution : 1280X1024 pixels or higher (32 bit color) • RAM : 2GB or higher • W eb Br owser : Inter net Explorer 7 or Higher , Firefox 9 or Higher , Chrome 15 or Higher , Safari 5.1 or Highe[...]

English _11 ● OVERVIEW WHA T’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name Camera 1 SNB-7002 or SND-7082 or SND-7082F or SNV-7082 UNLOCK 1 1 1 Instruction book, Installer S/W CD, CMS S/W DVD 2 SNB-7002/ SND-7082/ SND-7082F/ SNV-7082 Quick Guid[...]

over view 12_ overview Appearance Item Name Quantity Description Model Name C Mount Adapter, Auto Iris Lens Connector 1 Used to install the C Mount camera lens SNB-7002 Camera Holder (Mount) 1 Used to install the camera holder Camera Holder (Mount) Screws 2 Used to install the mount 6-position Terminal Block 1 Used for alarm in/out terminals 5-posi[...]

English _13 ● OVERVIEW Appearance Item Name Quantity Description Model Name Tapping Screw 1 Used to fix the safety bracket SND-7082F Bracket Safety 1 Safety Bracket ASSY-Tapping Screw 4 Used for installation on the wall or ceiling SNV-7082 L Wrench 1 Used to remove/ fix the dome cover Plastic Anchor 4 For fixing a screw, Inserted in a hole (reinf[...]

over view 14_ overview A T A GLANCE (SNB-7002) Front Side Item Description  Camera Holder (Mount) Holes Used when you mount the camera onto the bracket by fixing the camera holder (mount) adaptor with the bracket. b Mounting Bracket Screw Hole Used to fix the camera on a bracket or mounting bracket.  The screw size : use this screw to fix the[...]

English _15 ● OVERVIEW Item Description c Auto Iris Lens (Optional) Installed on the lens adaptor.  Auto Iris Lens Connector Used to supply power and output signal to control the iris of the lens. M  Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol.  Mounting Bracket is not include[...]

over view 16_ overview Rear Side Item Description  SD Memory Card Compartment Compartment for the SD memory card. b Audio terminal AUDIO OUT Used to connect to speakers. AUDIO IN Used to connect to a microphone. c SD, Power Indicators SD ON : A memory card is inserted and operates normally. Flashing : Failed to record, insufficient space, or ins[...]

English _17 ● OVERVIEW Item Description  Reset Button The button restores all camera settings to the factory default. Press and hold for about 5 seconds to reboot the system. J If you reset the camera, the network settings will be adjusted so that DHCP can be enabled. If there is no DHCP server in the network, you must run the IP Installer pro[...]

over view 18_ overview A T A GLANCE (SND-7082) Appearance Item Description  Top cover Case cover used to protect the lens and the main unit. b Camera Case Housing part that covers the camera body. UNLOCK  b c    [...]

English _19 ● OVERVIEW Item Description c Power Port Used to plug the power cable.  Test Monitor Out Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.  Network Port Used to connect the PoE or Ethernet cable for network connection.  Audio In Jack Used to c[...]

over view 20_ overview    UNLOCK UNLOCK b c      Components[...]

English _21 ● OVERVIEW Item Description  Lens Lens for the camera. b Alarm I/O Port ALARM IN Used to connect the alarm input signal. ALARM OUT Used to connect the alarm output signal. GND Used for earth-grounding. c Reset Button The button restores all camera settings to the factory default. Press and hold for about 5 seconds to reboot the sys[...]

over view 22_ overview A T A GLANCE (SND-7082F) Appearance Item Description  Top cover Case cover used to protect the lens and the main unit. b Camera Case Housing part that covers the camera body. c Power Port Used to plug the power cable.  Test Monitor Out Output port for test monitoring the video output. Use the test monitor cable to conne[...]

English _23 ● OVERVIEW Components Item Description  Network Port Used to connect the PoE or Ethernet cable for network connection. b Alarm I/O Port ALARM IN Used to connect the alarm input signal. ALARM OUT Used to connect the alarm output signal. GND Used for earth-grounding. c Test Monitor Out Output port for test monitoring the video output[...]

over view 24_ overview Item Description  Lock Release Lever Press the < UNLOCK > levers on both ends to separate camera module from the body.  Lens Lens for the camera.  Focus Adjustment Button The button adjusts the focus of image automatically.  SD Memory Card Compartment Compartment for the SD memory card.    [...]

English _25 ● OVERVIEW A T A GLANCE (SNV -7082) Appearance Item Description  Top cover Case cover used to protect the lens and the main unit. b Camera Case Housing part that covers the camera body. c Power Port Used to plug the power cable.  Test Monitor Out Output port for test monitoring the video output. Use the test monitor cable to con[...]

over view 26_ overview Components Item Description  Network Port Used to connect the PoE or Ethernet cable for network connection. b Alarm I/O Port ALARM IN Used to connect the alarm input signal. ALARM OUT Used to connect the alarm output signal. GND Used for earth-grounding. c Test Monitor Out Output port for test monitoring the video output. [...]

English _27 ● OVERVIEW Item Description  Lock Release Lever Press the < UNLOCK > levers on both ends to separate camera module from the body.  Lens Lens for the camera.  Focus Adjustment Button The button adjusts the focus of image automatically.  SD Memory Card Compartment Compartment for the SD memory card.  Release Lock If[...]

28_ installation & connection installation & connection MOUNTING THE LENS (SNB-7002) Disconnect the power before proceeding. M  The C lens and CS lens are not included in the product package. It is recommended that megapixel lens are use on this camera to optimise performance. Mounting the CS lens on a camera Turn the optional CS lens cl[...]

English _29 ● INST ALLA TION & CONNECTION Connecting the Auto Iris Lens connector Insert the lens connector into the corresponding hole of the camera. Focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object.[...]

installation & connection 30_ installation & connection Precautions befor e installation Ensure you read out the following instructions before installing the camera: • When installing on a ceiling or wall, desir ed spot must be capable of supporting at least 5 times of the camera’ s weight. • Stuck-in or peeled-off cables can cause da[...]

English _31 ● INST ALLA TION & CONNECTION 3. Hold down the lock lever in the outer direction as shown and turn the camera body in the < UNLOCK > direction (counter clockwise) to remove the bracket fr om the body .  If it fails, take the bottom hole of the bracket and turn the bracket in the < LOCK > direction (clockwise) to rem[...]

installation & connection 32_ installation & connection INST ALLA TION (SND-7082F) Disassembling 1. T ake the camera body with one hand and take the top cover with the other hand. Then, turn the cover counter clockwise to remove it. Installation 1. Use the provided template to drill one hole for the camera, and one for the screw (5 mm in di[...]

English _33 ● INST ALLA TION & CONNECTION T o add an alarm cable (not included) 1. For this, first you should remove the top cover from the housing. 2. Pull out the protruding rubber bar as shown. 3. This will reveal a hole in the place of the rubber bar , through which you insert the cable, and connect it to the alarm terminal on the PCB. 4.[...]

installation & connection 34_ installation & connection INST ALLA TION (SNV -7082) Disassembling 1. With the provided L-shaped wrench, loosen 3 bolts on the top cover counter clockwise to remove the cover . 2. Loosen 3 screws on the camera body counter clockwise, and push down the left/right LOCKER lever (in the arr ow dir ection) to releas[...]

English _35 ● INST ALLA TION & CONNECTION Installing on the ceiling directly 1. Remove the top cover from the case by r eferring to the “ Disassembling ” section. (page 34) 2. Drill a hole (diameter: 5mm, depth: min 35mm) in a desir ed position of the case bottom and insert the provided plastic anchor (HUD 5) to the end. 3. Fit the bottom[...]

installation & connection 36_ installation & connection 4. Loosen and remove the case-fixing scr ews on the camera unit. (x3) 5. Insert the camera unit into the hole so that it fits to the camera hole, and fix the unit using the ASSY tapping screws (TH M4×L30). (x3) 6. Adjust the lens in a desired dir ection by referring to the “ Adjusti[...]

English _37 ● INST ALLA TION & CONNECTION 2. CEILING MOUNT ADAPTOR(SBP-300CM)/ HANGING MOUNT(SBP-300HM3) This adaptor is used when installing the dome camera on a concrete ceiling. 3. POLE MOUNT ADAPTOR(SBP-300PM) This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or SBP-300WM1) installation on a pole whose diameter is bigger than 80mm. 4. [...]

installation & connection 38_ installation & connection Adjusting the monitoring direction for the camera (SND-7082/ SND-7082F/SNV -7082) Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt [...]

English _39 ● INST ALLA TION & CONNECTION INSERTING/REMOVING A SD MEMOR Y CARD J  Disconnect the power cable from the camera before inserting the SD memory card. Inserting a SD Memory Card Loosen the screw and open the cover of the SD memory card. Insert the SD card in the arrow direction as shown. Push the SD memory card in the direction [...]

installation & connection 40_ installation & connection J  Do not insert the SD memory card while it’ s upside down by force. Otherwise, it may damage the SD memory card. <SND-7082F> <SNV-7082>[...]

English _41 ● INST ALLA TION & CONNECTION Removing a SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. <SND-7082> UNLOCK UNLOCK <SNB-7002>[...]

installation & connection 42_ installation & connection J  Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the slot when released.  T o remove the SD memory card, set the card to < Off > in < Storage > menu and press [ Apply ( ) ] button. (Page 102)  Removing the SD memory car[...]

English _43 ● INST ALLA TION & CONNECTION MEMOR Y CARD INFORMA TION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’ s suitable for you Your camera [...]

installation & connection 44_ installation & connection CONNECTING WITH OTHER DEVICE J  The BNC Out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes. If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to the product. UNLOCK UNLOCK Monitor to[...]

English _45 ● INST ALLA TION & CONNECTION Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. J  If both PoE (Power over Ethernet) and DC 12V are supplied, the product will ope[...]

installation & connection 46_ installation & connection Grounding the Pr oduct (SNB-7002) Use a screw driver to connect earth grounding cable to the ground terminal below the power inlet terminal. J  Grounding protects the product from a surge or lightning.  When grounding, make sure to turn the product’s power off. Recommended Grou[...]

English _47 ● INST ALLA TION & CONNECTION Connecting to Audio Input/Output UNLOCK Network PC Microphone Speaker Microphone Speaker Amp Microphone Amp Speaker Microphone Amp Amp Microphone Speaker Speaker[...]

installation & connection 48_ installation & connection 1. Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the amplifier that the microphone is connected to. 2. Connect the AUDIO OUT port of the camera with the speaker or LINE IN port of the amplifier that the speaker is connected to. 3. Check the specificati[...]

English _49 ● INST ALLA TION & CONNECTION Connecting to the I/O port box (SND-7082/SND-7082F/SNV -7082) Connect the Alarm I/O cable to the corresponding port of the inner port box. • ALARM IN : Used to connect the alarm input signal. • ALARM OUT : Used to connect the alarm output signal. • GND : Used for earth-grounding. T o connect the[...]

50_ network connection and setup network connection and setup Y ou can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTL Y TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2. Enter the IP address of the camera in the addr ess[...]

English _51 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA DIRECTL Y TO A DHCP BASED DSL/CABLE MODEM 1. Use the cross LAN cable to connect the network cable dir ectly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Inter ne[...]

52_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTL Y TO A PPPoE MODEM 1. Use the cross LAN cable to connect the network cable dir ectly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Inter [...]

English _53 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband[...]

54_ network connection and setup network connection and setup BUTTONS USED IN IP INST ALLER Item Description  Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias This function is not currently implemented. c Mode Displays either <[...]

English _55 ● NETWORK CONNECTION AND SETUP Item Description  URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed.  IPv4 Scans for cameras with the IPv4 setting.  IPv6 Scans for cameras with the IPv6 setting. Activated i[...]

56_ network connection and setup network connection and setup 3. In the < Address > pane, pr ovide the necessary information. • MAC (Ethernet) Address : The MAC addr ess imprinted on the camera label is automatically displayed and requir es no user setting. M  Y ou can configure the static IP settings only if the DHCP checkbox is uncheck[...]

English _57 ● NETWORK CONNECTION AND SETUP If using a Broadband Router • IP Address : Enter an addr ess falling in the IP range provided by the Br oadband Router . ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The < Subnet Mask > of the Broadband Router will be the < Subnet Mask > of the camera. • Gatew[...]

58_ network connection and setup network connection and setup Auto Network Setup Run < IP Installer_v2.XX.exe > to display the camera search list. At the initial startup, both [ Auto Set ] and [ Manual Set ] will be grayed out. M  For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this f[...]

English _59 ● NETWORK CONNECTION AND SETUP DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP environment - If a Broadband Router , with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP pr otocols - If IPs are assigned by the internal DHCP server v[...]

60_ network connection and setup network connection and setup PORT RANGE FOR WARD (POR T MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1. From the Setup menu of the Br oadban[...]

English _61 ● NETWORK CONNECTION AND SETUP Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. J  If you don't set properly the TCP 943 port of the router , you canno[...]

62_ network connection and setup network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer . It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. M  Access to the camera can also be gained by typing the[...]

English _63 ● WEB VIEWER web viewer CONNECTING TO THE CAMERA Normally , you would 1. Launch the Internet browser . 2. T ype the IP address of the camera in the address bar . ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear . • IP address (IPv6) : 2001:230:abcd: ff ff:0000:0000:fff f:1111  ht[...]

64_ web viewer web viewer T o check the DDNS address If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP address of your network will be changed each time you try to connect to the ISP (Internet Service Provider) server. If this is the case, you will not be informed of the IP address changed by DDNS. Once [...]

English _65 ● WEB VIEWER INST ALLING SIL VERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. T o install on Windows OS 1. Click < Click Here >. 2. When the file download[...]

66_ web viewer web viewer 5. When done, click < Close >. T o install on MAC OS 1. Run the file trailing with “.dmg”. 2. Run the install package file automatically created, ending with “.pkg”. 3. Click < Continue >.[...]

English _67 ● WEB VIEWER 4. Select your language on the language selection screen, and click < Continue >. 5. Click < Agree >. 6. Click < Install >.[...]

68_ web viewer web viewer 7. Enter the password of the account currently logged in, and click < Install Software > and continue. 8. Once completed, click < Close >.[...]

English _69 ● WEB VIEWER INST ALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. M  Microsoft Visual C++ 2010 Redistribute Package should be installed on the PC before you ca[...]

70_ web viewer web viewer USING THE LIVE SCREEN Item Description  Monitoring Move to the monitoring screen. b Playback Switch to the monitoring screen that plays recording data in the SD memory. c Setup Move to the Setup screen.  Viewer Screen Displays the Live video on the screen.  Y ou can use the mouse wheel to activate the digital zoom[...]

English _71 ● WEB VIEWER Item Description  Full Screen Switch the current video to the maximum size of the monitor.  Capture Saves the snapshot as an image file in the .bmp or .jpg format.  Audio/Microphone Control Enable/disable audio and microphone, and controls volume.  Alarm output Activate the Alarm Out port.  Hide the context[...]

72_ web viewer web viewer T o control the audio sound 1. Click [ Audio ( ) ] icon to activate audio communication. 2. Use [ ] bar to control the volume. T o control microphone 1. Click [ Mic ( )] icon to activate the microphone. SEARCH AND PLA Y BY EVENT 1. Click the [ Playback ( ) ] button. 2. Specify the start time and end time of your search. 3.[...]

English _73 ● WEB VIEWER SEARCH AND PLA Y BY TIME 1. Click [ Time Search ( ) ]. 2. Click a desired date in the calendar . The video on the specified date will be played. 3. If the video playback is stopped, select a time and click [ Play ( ) ]. The video on the selected time will be played. 4. While the video is being played, the r ecor ding time[...]

74_ web viewer web viewer T o check time information of the playing video 1. Click the [ Abou t ( ) ] button. 2. Date and time information appears on the screen. T o back up the searched video 1. During playback, click [ ] on the scene to back up. The scheduling window for backup start and end time appears. 2. Click [ ] button. The Save As window a[...]

setup screen SETUP You can configure the video & audio, network, event and system settings of the camera in the network. 1. In the Live scr een, click [ Setup ( ) ] . 2. The Setup screen appears. J  Microsoft Sliverlight 4.0 is required to be installed on the PC for setup pages that provide preview video. If not installed already , automatic[...]

setup screen 6. Click the input box of each item and enter / select a desired value.  The context menu may differ depending on the selected codec type. • Default profile : If no pr ofile is selected when using the Web Viewer , the default video pr ofile is applied. • E-mail/FTP pr ofile : Video pr ofile to be transferred to the specified ema[...]

T o add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select one from the < Video profile > options. 2. Provide the name and select a codec. 3. Specify the conditions under which the codec will be applied. 4. Specify the details of the selected cod[...]

setup screen What is GOV length? GOV(Group of Video object planes) is a set of video frames for H.264 compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOV consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which contains[...]

T o set the privacy zone You can specify a certain area of the camera video to be protected for your privacy. 1. Set it to < On >. 2. When done, click [ Apply ( ) ]. 3. Select the type and color masking of desir ed privacy ar ea. • Rectangle : Place the cursor at a point in the video and drag it to whatever you need. Y ou can overlap rectan[...]

setup screen • Codec : Sets the codec to be used. - G.711 : A audio codec standard, it uses 64 Kbps PCM (Pulse Code Modulation) encoding. ITU standard audio codec that is adequate for digital voice transfer in PSTN network or through a PBX. - G.726 : ITU standard audio codec applying ADPCM (Adaptive Differential Pulse Code Modulation) for variabl[...]

SSDR (Samsung Super Dynamic Range) Setup In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness. 1. Select < SSDR >. 2. Set < Mode > to < On >. 3. Configure the < Level > and < D-Range > settings as necessary . • Lev[...]

setup screen BLC Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select < Backlight >. 2. Set < Mode > to < BLC >. 3. Set < BLC level >. Y ou can change the level to adjust the brightness of the monitoring area. 4. Set the < T op, Bottom, Left, Right > levels[...]

WDR Setup It displays a sharp image of the objects in a scene where both bright and dark areas exist. 1. Select < Backlight >. 2. Set < Mode > to < WDR >. 3. Specify the < WDR level >. M  If applied with WDR, noise may be found on the border between the brighter and darker areas. Ex) Exposure Setup (SNB-7002) You can adju[...]

setup screen - Manual : Adjust the shutter speed of the camera manually .  Y ou can select one between 1/30 and 1/12000sec in 2 mega mode, and select one between 1/20 and 1/12000sec in 3 mega mode. - A.FLK (Anti flicker) : Select this feature if you encounter a flickering scr een due to a frequency mismatch with the ambient lighting. • Shutter[...]

- Manual : Adjust the shutter speed of the camera manually .  Y ou can select one between 1/30 and 1/12000sec in 2 mega mode, and select one between 1/20 and 1/12000sec in 3 mega mode. - A.FLK (Anti flicker) : Select this feature if you encounter a flickering scr een due to a frequency mismatch with the ambient lighting. • Shutter speed : Cont[...]

setup screen • Dwell time : This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes. • Duration : Specify the time interval of lighting at which the sequence operation is triggered. • Simple focus after D/N : When switching day/night mode, automatically runs focus adjustment.[...]

• Dwell time : This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes. • Duration : Specify the time interval of lighting at which the sequence operation is triggered. • Sharpness mode : Adjust the overall sharpness of the image. If selecting < On >, you can adjust the[...]

setup screen Smart codec setup Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Smart codec setup >. 3. Set the image quality . The ROI area will be displayed in the specified quality . 4. [...]

Focus setup (SNB-7002) You can adjust the focus of video image. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Focus setup > . 3. Set the focus. (How to use the Simple Focus) 1) Focus initialize : Restores the focus adjustment to the default flange back position. 2) Focus (Adjust Lens) : Manually adjusts th[...]

setup screen Focus setup (SND-7082/SND-7082F/SNV -7082) You can adjust the focus and zoom ratio of video image. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Focus setup > . 3. Set the focus and zoom. • Focus : Manually adjusts the lens focus (Far <-> Near). • Zoom : Manually adjusts the zooming [...]

NETWORK SETUP Interface 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Interface >. 3. Set the < Interface > and < IPv6 setup > as necessary . • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway , DNS1, and DNS2. - DHCP : Specify the DNS1 and DNS2. - PPPoE :[...]

setup screen Port 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Port >. 3. T ype in each item in the Port menu as necessary .  Neither the port range between 0 and 1023 nor port 3702 is available. • HTTP port : HTTP port used to access the camera via the web browser . The default is 80(TCP).  Setting the HTT[...]

DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < DDNS >. 3. Select the < DDNS > connection type. 4. T ype in the DDNS items according to the select[...]

setup screen Registering with DDNS T o register your product with the Samsung DDNS 1. Visit the iPOLiS web site (www .samsungipolis.com) and sign in with a register ed account. 2. From the top menu bar , select < DDNS SERVICE > - < MY DDNS >. 3. Click [ PRODUCT REGISTRA TION ]. 4. Enter the product ID.  Y ou must perform the duplicat[...]

T o connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set < DDNS > to < Samsung DDNS >. 2. Provide the < Pr oduct ID > that you register ed product ID with the DDNS site. 3. Click [ Apply ( ) ]. When the connection is successfully made, you will see the message of < (Success) > on the screen. Configuri[...]

setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < IP filtering >. 3. Select < Filtering type >. • Deny : If selecting this, access from those IPs that are added to the filtering will be restricted. • Allow : I[...]

SSL You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < SSL >. 3. Select a secure connection system.  T o access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_[...]

setup screen 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < 802.1x >. 3. Set the < IEEE 802.1x setting(EAPOL using EAP-TLS) >. • Enable IEEE 802.1x : Specify the use of the 802.1x protocol. • EA[...]

QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < QoS >. 3. Click the [ Add ( ) ] button. The IP list will be created. 4. Enter an IP address to which you will apply QoS. M  The default prefix for IPv4 is 32; For DSCP , the default i[...]

setup screen • Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is < admin4321 >.  The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related iss[...]

- Port : The default port of the FTP server is 21; however , you can use a different port number according to the FTP server settings. - Passive mode : Select < On > if you need to connect in passive mode due to the firewall or the FTP server settings. • E-mail configuration - Server address : Enter the IP addr ess of the email server that [...]

setup screen Storage You can set the record conditions or the use of recording for the SD memory, check the size of stored data, or format the SD memory itself. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Storage >. T o make recording on the SD memory 1. Check the memory card’ s < Free > size and < T otal[...]

Alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Alarm input > from < Event action setup >. 4. Set whether or not to < Enable >. 5. Specify an input device. • T ype - Normal open : It is norma[...]

setup screen Time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event. 1. Fr om the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Time schedule > from < Event action setup >. 4. Set whether or not to < Enable >[...]

T ampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. Fr om the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < T ampering detection > from < Event[...]

setup screen Motion detection / Video analytics Events of motion detection and video analysis can be set to trigger event signal output. 1. Fr om the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Motion detection / Video analytics > from < Event action setup >. 4. Set whether or not to < [...]

J  Motion detection and Video analytics cannot be used simultaneously.  Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected.  Set the maximum and minimum detection size appropriately to objects to be detected.  Detected size of an object may have difference with the actual size according to[...]

setup screen T o use Motion detection It detects a motion that meets all conditions specified by sensitivity, size and area. 1. Select a motion detection mode. 2. Select < Sensitivity > tab to set the sensitivity level. Y ou can set the sensor’ s sensitivity to detect a motion out of the background fr om the monitoring video. J  In a sit[...]

4. Select < Area > tab. Y ou can specify an area on the screen to include or exclude the area to/fr om detection. Y ou can specify up to 4 areas. • Detection area: Sets the entir e screen as excluded fr om detection, and adds specified area as motion detection area. Use your mouse to drag to specify preferr ed area as the motion detection a[...]

setup screen T o use Video analytics It detects event that meets all conditions specified by sensitivity, size and area and the event condition rules. 1. Select the video analysis mode. 2. Set < Sensitivity >, < Size > and < Area >. For further details on settings, refer to “ T o use Motion detection ”. (Page 108~109) 3. Selec[...]

T o set the video analysis rules Passing 1. Set the type to < Passing, Entering/ Exiting >. 2. Set the event rule to < Virtual line based rules >. 3. On the screen, click on pr eferred starting and ending point of the virtual line, then a popup window appears. 4. Select the desired rule: • Right: Detects motions of moving from the lef[...]

setup screen Appearing (Disappearing) 1. Set the analysis type to < Appearing (Disappearing) >. 2. Select the desired event rule: • Defined area based rules : It detects event of appearing object that appears in the area and r emaining for a certain time period while not passing through the ar ea borders, and opposite case of disappearing o[...]

Face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Face detection > from < Event action setup > . 4. Set whether or not to < Enable > . 5. Select < Sensitivity > tab to set the sensitivi[...]

setup screen Audio detection You can set to detect sound over the specified level and trigger an event accordingly. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Audio detection > from < Event action setup > . 4. Set whether or not to < Enable > . 5. Set the audio detection[...]

Alarm output setup 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Alarm output setup >. 3. Set the camera’ s type of alarm output.  If you change the alarm output type, the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed accordingly . • T ype - Normal o[...]

setup screen SYSTEM SETUP Product information 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Product information >. 3. Check the camera information, or provide details accor ding to your network environment. • Model : Model name of the product. • Serial number : Product serial number . • Device name : Provide a [...]

Date & Time 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Date & Time >. 3. Specify the time and date that will be applied to the camera. • Current system time : Displays the current time settings of your system. • Timezone : Specify the local time zone based on the GMT . • Use daylight saving time : If[...]

setup screen User 1. From the Setup menu, select the < System ( ) > tab. 2. Click < User >. 3. Provide the necessary user information. • Administrator password change : Change the password for the administrator .  The default password can be exposed to a hacking thread so it is recommended to change the password after installing th[...]

Upgrade / Reboot 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Upgrade / Reboot >. 3. Select a desired item and set it appropriately . • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default. - Except network parameter : Reset the other settings except for Network s[...]

setup screen M  It may take a max of 20 minutes for the upgrade process. If you forcibly terminate the upgrade process, upgrade will not be completed properly .  During restarting the system, accessing with web viewer will not be made.  Y ou can download the latest version from the Samsung web site (www.samsungcctv .com). T o back up the c[...]

Log You can check the system log or event log. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Log >. 3. Select a log type. • System : Y ou can check the system logs where any system changes are r ecorded including the time information. • Event : Y ou can check the event logs including the time information. 4. From[...]

setup screen Profile access You can check the profile information. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Profile access >. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec. - Bitrate(kbps) : Show both the actual bit rate and the se[...]

SPECIFICA TION Items Description SNB-7002 SND-7082(F) SNV-7082 Video Imaging Device 1/3” 3.1M PS CMOS Total Pixels 2,064(H) X 1,578(V) Effective Pixels 2,052(H) X 1,536(V) Scanning System Progressive Min. Illumination Color : 0.7 Lux (F1.2, 50IRE), 0.011 Lux (Sens up 60X) B/W : 0.07 Lux (F1.2, 50IRE), 0.001 Lux (Sens up 60X) S / N Ratio 50dB Vide[...]

appendix Items Description SNB-7002 SND-7082(F) SNV-7082 Pan / Tilt / Rotate Pan Range - 0°~355° Pan Speed - Tilt Range - 0°~90° Tilt Speed - Rotate Range - 0°~355° Preset - Preset Accuracy - Auto Tracking - Operational Camera Title Off / On (Displayed up to 15 characters) Day & Night Auto (ICR) / Color / B/W / External Backlight Compensa[...]

Items Description SNB-7002 SND-7082(F) SNV-7082 Operational Sens-up (Frame Integration) Off / Auto (2X ~ 60X) AGC (Auto Gain Control) Off / Low / Middle / High White Balance ATW / AWC / Manual / Indoor / Outdoor Electronic Shutter Speed Auto / A.FLK / Manual (1/30 ~ 12,000sec) Digital Zoom - Flip / Mirror Off / On Intelligent Video Analytics Audio [...]

appendix Items Description SNB-7002 SND-7082(F) SNV-7082 Network Max. Framerate <3M Mode> * H.264 : Max 20 fps at all resolutions * MJPEG : 800x600 ~ 320x180 - 20 fps, 1024x768 ~ 1920x1080 - 15 fps, 2048x1536 - 10 fps <2M Mode> * H.264 : Max 30 fps at all resolutions * MJPEG : 800x600 ~ 320x180 - 30 fps, 1024x768 ~ 1920x1080 : 15 fps Sm[...]

Items Description SNB-7002 SND-7082(F) SNV-7082 Network Streaming Method Unicast / Multicast Max. User Access 10 users at Unicast Mode Memory Slot SD/SDHC Memory Slot ONVIF Conformance Yes Webpage Language English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Polish, Turkish, Rumanian, Se[...]

appendix Items Description SNB-7002 SND-7082(F) SNV-7082 Electrical Input Voltage DC 12V, PoE(IEEE802.3af) Power Consumption Max. 9.0W (DC 12V, PoE(class3)) Max. 9.0W (DC 12V, PoE(class3) - Heater Off) Max. 12.95W (PoE(class3) - Heater On) Mechanical Color / Material Body : Dark Gray / Aluminum Body : Ivory / Plastic Body : Ivory / Aluminum Dimensi[...]

PRODUCT OVERVIEW SNB-7002 Unit : mm (inch) English _129 ● APPENDIX 150.5 (5.93") 72.0 (2.83") 60.0 (2.36")[...]

appendix SND-7082 Unit : mm (inch) 129.4 (5.09") Ø133 (5.24") Ø90 Ø100 .4 (3.95") 125° 110° 130_ appendix[...]

SND-7082F Unit : mm (inch) 75.5 (2.97") 49.5 (1.95") 2 (0.08") Ø143 .0 (5.63") Ø159.9 (6.3") Ø122.5 (4.82") Ø100 (3.94") Ø125 (4.92") 30° 30° English _131 ● APPENDIX[...]

appendix 83.5(3.29") 85 (3.35") Ø134.5 (5.3") 46 (1.81") 85 (3.35") Ø160 (6.3") Ø100 (3.94") Ø34.5(1.36") SNV -7082 Unit : mm (inch) 132_ appendix[...]

TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without any problem. y If the[...]

appendix PROBLEM SOLUTION <Motion detection / Video analytics> of <Event setup> is set to <Enable>, but no notification e-mail reaches me even when an analysis event had occurred. y Verify the settings in the following sequence: A. Check <Data & Time> settings. B. The <Motion detection / Video analytics> should be [...]

Open Source Announcement GPL/LGPL software license The software included in this product contains copyrighted softwar e that is licensed under the GPL/LGPL. Y ou may obtain the complete Corresponding Source code fr om us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obta[...]

c) If the modified program normally reads commands interactively when run,you must cause it, when started running for such interactive use in the most ordinary way , to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may re[...]

9. The Free Software Foundation may publish revised and/ or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to addr ess new problems or concerns. Each version is given a distinguishing version number . If the Program specifies a version number[...]

T o protect your rights, we need to pr event others from denying you these rights or asking you to surrender the rights. Therefore, you have certain r esponsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the fr eedom of others. For example, if you distribute copies of such a program, whether gra[...]

3. Protecting Users’ Legal Rights From anti-Cir cumvention Law . No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measur es. When you [...]

occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regar dless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not [...]

11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’ s “contributor version”. A contributor’ s “essential patent claims” are all patent claims owned or controlled by the contributor , whether [...]

A F AILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER P ARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall[...]

The “Library”, below , refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say , a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straigh[...]

6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions of the Library , and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’ s own use and reverse engineering for debug[...]

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries [...]

6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL T oolkit (http://www .openssl.org/)” THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE [...]

BSD License Some software components of this product incorporate sour ce code covered under the BSD license as follows. Component Name License URL net-snmp-5.4 lighttpd 1.4.25 Game-ws MiniUPnP Project Client BSD BSD 2.0 BSD 2.0 BSD 2.0 http://www .net-snmp.org/about/license.html http://www .opensource.org/licenses/bsd-license.html lighttpd is a sec[...]

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DA TA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABI[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTAL[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTAL[...]

The MIT License Some software components of this product incorporate sour ce code covered under the MIT license as follows MIT License 2.0 - Acewidget, bettermeans, jquery-ui, libxml, libxml2, Mesa3D-MesaLib,mwEmbed,OpenGL Samples Pack, Wide Studio, xorg-server Copyright (c) 2011, The Dojo Foundation Copyright 2010, AUTHORS.txt (http://jqueryui.com[...]

The Independent JPEG Group’ s JPEG Software The software included in this product contains copyrighted softwar e that is licensed under the JPEG license. • JPEG license - Code project – Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Independent JPEG Group’ s free JPEG software. Y ou are welcome[...]

Mozilla Public License Since we, at Samsung T echwin, used the Mozilla Firefox component without modifying the sour ce code according to the MOZILLA Public license 1.1, we are not obliged to provide the sour ce code of the corresponding component. • Version 1.1 1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise maki[...]

(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor V ersion; 2) separate from the Contributor V ersion; 3) for infringements caused by: i) third party modifications of Contributor V ersion or ii) the combination of Modifications made by that Contributor with othe[...]

5. Application of this License. This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code. 6. V ersions of the License. 6.1. New V ersions. Netscape Communications Corporation (‘’Netscape’ ’) may publish revised and/or new versions of the License from time to time. Each vers[...]

Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12. RESPONSIBILITY FOR CLAIMS. As between Initial Developer and the Contributors, each party is responsible for claims[...]

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. This equipment has[...]

SALES NETWORK SAMSUNG TECHWIN CO ., L TD. Samsungtechwin R&D Center , 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 F AX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 T oll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-3[...]