Xerox 96MX Bedienungsanleitung

Xerox DocuPrint 96/DocuPrint 96MX Laser Printing Syst em Forms Creation Guide April 1998 721P8563 0[...]

Xerox Corpora t i on 701 S. Aviation Boulevard El Segu ndo, CA 90245 ©1998 by Xerox Corporation. A ll rights re se rved. Copyright protection claimed includes all forms and matters of copyrightable mate rial and information now allowed by statutory or judicial law or he r einafter granted, including withou t limitation, material generated from the[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE iii Rela te d pu bl i ca ti o ns The Xerox Do cuPrint 96/ DocuPrint 96MX Las er Printing S ystem For m s C r ea tio n G uid e is part of the eight manual reference set for your laser p ri nting syst e m. The entire refe re nce set is listed in the table below. Several other rela ted documen[...]

iv XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE v Table of Conte nts Related publications iii Notice iii Intr odu cti on ix About the reference set ix Xerox DocuPrint 96/DocuPrint 96MX Laser Printing System document set x What this guide contains xii Conventions used in this guide xiii 1. Over view 1- 1 Laser p r inting technology 1-2 Pa[...]

TAB LE OF CO NTE NTS vi XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Specifying TAB as a form 3-8 LANDSCAPE/PORTRAIT command 3-9 GRID com mand 3-10 FONT command 3-15 Description commands 3-16 LINE comman d 3-18 Types of lines 3-20 BOX c ommand 3-23 TEXT com mands 3-2 6 TEXT AT 3-2 6 Aligning tex t 3-28 TEXT I N BOX 3-3 3 TEXT IN BO[...]

TABL E OF CONTENTS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE vii Local density and page setup errors 5-6 Sum mary 5- 7 Using boxes 5-8 Text in bo xes 5 -8 Locating the closest box 5-9 Shading 5-12 Sec tio ns 5-13 Rounding mea suremen ts 5-14 Converting other unit values to dot s 5-14 Rounding variable data 5-15 Suggest ed coding te[...]

viii XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Inde x INDEX- 1[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE i x Introduc tion The DocuPrint 96/Do cuPrint 96MX Laser Printing System Forms Creation Guide is intende d for forms de signers who ha ve a basic knowledge of the DocuPrint 96/DocuPrint 96MX Laser Printing System (LPS). You may have received o n-site tra ining, or you may have attende d a X[...]

INTRO DUC TION x XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Xer ox Do cuP rint 96/D ocu Prin t 96M X L aser Pri nting Sy stem doc umen t se t The Xerox DocuPrint 96/DocuPrint 96MX LPS docum ent set includes the following: Xerox DocuPrint 96/Docu Prin t 96MX LPS Ope r ator Gui de This referenc e contains the following information:[...]

INTRODUCTION XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE x i Xerox DocuPrint 96/Docu Prin t 96MX L P S Fo r m s Cr eat i on Gu i de This ref erence contains the f ollowing informat ion: • Basic conc ept s for creat ing forms • Coding and compi ling for LPS Forms Description Language • Sam ple form setup comm and se ts • Tips [...]

INTRO DUC TION xii XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Wh at t his gui de cont ains The DocuPrint 96 Laser Printing System Forms Creation Guide shows how to create electronic f orms by describing them in words and numbers. FDL is not complicated; it requires performing a few dimension al m easurements and learning some eas[...]

INTRODUCTION XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE xiii Conve ntions use d in th is guide This guide uses the following conventions: < > Angl e brackets are used for key s on t he keyb oard. { } Braces indicate that one of the items stacked in side must be ent ered. ... Ellipses in di ca te th a t you ca n rep e at a p ar[...]

INTRO DUC TION xiv XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 1-1 1. 1 Ov erview The laser printing system (L PS) provides the capability to create electronic forms tailored to meet your individual requirement s . You create electronic forms using Forms Description Language (FDL). This simple-to-learn, easy-to-us e langu age enable s you to design and[...]

OVERVI EW 1-2 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE La ser p r inti ng te chno lo gy Before you learn about the actual forms creation process, an introduction to t he p r int ing system wil l be helpful. Xerox laser printing systems are sophi sticated nonimpact printers that use a combinat ion of laser, digital, and xerogra[...]

OVE RVIEW XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 1-3 F onts A set of standa r d L PS fonts are provided f r e e of charge at installation time. (Font is a publ ishing term referring to a set of characters with the sam e type style, type size, and orie ntation.) Note: Additional fonts, whether standard or custom des igned, may be[...]

OVERVI EW 1-4 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 2-1 2. 2 Ba sic co n c ept s Certain basic concepts are required to understand the forms creation process on laser printing systems. These involve the size, shape, and location of the overall image on the page of a doc ume nt, the orientation of the text or graphics on t he page, the size a[...]

BASIC CONCEPT S 2-2 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE F onts Fonts are character sets, each having a u nique type style, typ e size, and orientation. Fixed and proportional spacing Fixed and prop orti onally s paced fonts are avai lable for us e on laser printing systems. E ach character oc cupies an area on the f orm c[...]

BASIC CO NCEPT S XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 2-3 F i gur e 2-4. Font ori ent at i on Note that even though type st yle and size are the same, four different fonts are u sed, each with a unique orientation. The inverse portrait font could be used for certa in types o f titles or lab els on a landscape form. Conversely,[...]

BASIC CONCEPT S 2-4 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Page frame s A page frame is a set of bo undaries associa ted with a page a s a unit of printing or i maging . Three page frames are defined in this guide: • Physical page • System page • Virtual page Phy sical pag e The pap er on which a form is printed is the[...]

BASIC CO NCEPT S XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 2-5 Syst em pag e The maxim um area in whi ch graphi cs and text can be imaged is called the “syst e m page.” Edgema rkin g To accommod ate edgemarkin g, which is the pl a cemen t of marks along the edge of the physical page, the system page must be la rger than the phy[...]

BASIC CONCEPT S 2-6 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Fo r m or ig i n All forms data described by FDL commands is positioned re lat ive to a point cal led the “form origin. ” This point is o ffset from the virtual page corner by horizontal and vertical displ acement values, which you specify using the GRID com man [...]

BASIC CO NCEPT S XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 2-7 The followin g symbol in figu re 2- 7 show s where the t ext block origin is l oc ated . F i gur e 2-7. Tex t bloc k ori gi n s ym bo l Figure 2-8 shows t w o text blocks, one using a portrait font and one using a landscape font. This is the poi nt used to posi tion the[...]

BASIC CONCEPT S 2-8 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Grid s The locat ion of a form elemen t on a page is specified in t erms of it s horizontal and vertical d isplacement f rom the form o r igin. The units of measurement used to define this displacemen t can be the following: • Linear units—inche s or centimeters [...]

BASIC CO NCEPT S XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 2-9 If you are measuring the grid in cpi and lpi un it s, th e origin of the “A” character cell is l ocated two lines down and one character width to the right of the form origin. At 10 cpi and 6 lpi, the “A” is .33 inch down from the form origin and .10 inch to the[...]

BASIC CONCEPT S 2-10 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Pr edefine d format s A set of predef ined print description entries or f ormat s, having standard format specifi cations, are provided on the operating system software (OSS) tapes . You m ay use these st andard print format s or define your own to suit your specific[...]

BASIC CO NCEPT S XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 2-11 Table 2-2 lists t he standard LP S print form ats. * First dimen sion given is th e horizontal dim ension. Therefo re, 11 by 8.5 inches i s landscape orientation, whi le 8.5 by 11 inches is port rait orientation. Fo r A4 paper, 297 by 210 mm i s landscape, an d 210 by [...]

BASIC CONCEPT S 2-12 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Da ta ty pes Two t ypes of d ata are used in LP S forms creating an d p r inting: • Variable d ata • Forms data The term “variable data” generally refers to computer produced information that the LPS merges with a form. T ypically this da ta varies from page [...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-1 3. 3 Forms de scrip tion langua ge This c hapter des cribes the function and use of each forms description language (FDL) comm and in gene rating a form electronically. FDL com ma nd ov ervi ew FDL is a set of k eyword comm ands that you can use to ge nerate an electronic form. To do th[...]

FORMS DE SCRIPTION LANGUAGE 3-2 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Co mmand s u mma ry The following commands are av ailable for creating a form: FORM /RESOLUTION Identifies the name of a form in the forms library and the resolution at which the form shoul d be c ompiled for printing. PAPER Identifies the p aper s ize fo[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-3 Co mman d form at The following is true for each FDL comman d: • The com mand consists of a comman d ident if ier and v arious parameters and keywords assoc iated with the funct ion. • Spaces or comm as separate k eyw ords and parameters . • A com mand i[...]

FORMS DE SCRIPTION LANGUAGE 3-4 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Step s to crea tin g a form There are three basic steps required to produce an electronic form: 1. Initiate an ed it ing sessio n. 2. Enter the FDL com man ds. 3. Compile a nd p r int the form . Initiating an editing session The edi tor u t ilit y is use [...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-5 Set up comma nds Before entering comma nds to describe a form, enter the setup command s to specify the following: • FORM c ommand • PAPER comm and • LANDSCAPE/PORTRAIT command • GR ID command • FON T c omm a nd Of the setup commands , only the FORM [...]

FORMS DE SCRIPTION LANGUAGE 3-6 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE PAPER c ommand This command identifies the paper size for which t he form is designed. It is an optional command that enab les you to select a paper size that is di fferent than t he sysgen-defined pa per size. Spec i fy i ng pa per si z e The format of t[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-7 Usi ng B4 pap er si ze When B4 size pape r is specified in centimeters , the value should be rounded of f to 25 .71 CM. This is only neces sary when y our GRI D sta tement is G RID [UNIT ] [IS ] INCHES. W hen no paper size is specified When there is no PAPER [[...]

FORMS DE SCRIPTION LANGUAGE 3-8 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Specifying TAB as a form To define a form to be used as a tab, specify the following: PAPER [SIZ E] [IS] 9 BY 1 1; Refer to your DocuPrint 96/ DocuPrint 96MX L PS PDL Reference for a detailed explanation of the Ordered and Tab Stock fea ture. Spec ifying [...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-9 LANDSCAPE / PORTRAIT command Spec i fy in g pag e ori ent at i on and virtual page siz e The LANDSCAP E/PORT RAIT comma nd tells the system the orientation of the form. LANDSCAPE A LANDSCAP E form is orient ed horizontally (like most paintings or photographs o[...]

FORMS DE SCRIPTION LANGUAGE 3-10 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE GRID comma nd Sp e ci f yi n g gri d un it si z e and f orm or ig in The GRID command tells t he system how far apart t o space the horizontal and verti c al grid l ines. T his comm and also specifies t he location of the f orm origin with respect to the [...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-11 • The G RID com mand may s pecify the n ame of a forma t, which autom atically provides page orientation, f orm origin, and gri d unit dimension s. (Refer to table 2-1.) All predefined formats specify t he grid units in li nes and cha racters p er inch. The[...]

FORMS DE SCRIPTION LANGUAGE 3-12 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Example 2 LANDSCAPE; GRID [UNIT] [I S] FMT1 ORIGIN 1 INCH 1 INCH; Figure 3-2 shows a form with the orig in offset one inch from the virtual page origin. F i gur e 3-2. Form w ith o rigi n off set one inch fro m v irtual pa ge or igin In example 2, the ORI[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-13 Example 4 LANDSCAPE PAGE SIZE IS 3 INCH 3 I NC H; GRID [UNIT ] [I S] 1 CM; Figure 3-4 sho ws a form with the grid s pecified, but not the o rigin or for m at . F i gur e 3-4. Form w ith g rid speci fied, but no or igin o r format In exam ple 4, ex plicit grid[...]

FORMS DE SCRIPTION LANGUAGE 3-14 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Example 6 LANDSCAPE PAGE SIZE IS 3 INCH 3 I NC H; GRID [UNIT] [I S] FMT1 ORIGIN 1 INCH 1 INCH; Figure 3-6 shows a f orm with the grid, origin, a nd page size spec ified. F i gur e 3-6. Fo rm w ith g ri d, o rig in , an d pa g e s iz e spe c ifi ed In exam[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-15 FON T co mm and Specifying fonts The FONT comma nd identifies the character sets to use when creating a nd pr int ing forms data and variabl e data. Fonts m ust be selected using the FONT comman d before text can be specified . FONT can be used only once. The[...]

FORMS DE SCRIPTION LANGUAGE 3-16 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE De scri pti on comm ands The description com ma nds specify the location, size , and characteristics o f the form elements: li nes, boxes, logos, graphi cs, form sections, and text. The com mands us ed for en tering d escri ptive form data a r e: • LINE[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-17 F i gur e 3-7. Use of a nega tive coord inate[...]

FORMS DE SCRIPTION LANGUAGE 3-18 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE LIN E c o mman d Sp e c i f yin g li ne s The L INE command s pecifies that one or more lines are to be d rawn in th e same direction. A LINE command defines the following: • Point at which the line begin s (the AT l o cation) • Direction of the line [...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-19 c e Coordinate of the end of the line, measured on the x or y axis, depending on the direction of the line. c a Absolute x or y coordinate at which to start repetitive li nes in a horizontal or vertical direction. Multiple ca parameters can be specified. Whet[...]

FORMS DE SCRIPTION LANGUAGE 3-20 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Typ es of li nes The following types of lines may be drawn: • Solid A n unbroken, straight line • Broken Line is divided in to m any equal sections , separated b y small a mounts of space _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ •[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-21 F i gur e 3-8. Drawing a h orizontal lin e (rows and column s) Example 2 AT 3.5 DRAW LINE IN INCHES FROM 4 TO 10; This comma nd specifies the drawing of a horizontal line 3.5 inches down from the form ori gin, beginning four inches to th e right of the form o[...]

FORMS DE SCRIPTION LANGUAGE 3-22 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Example 3 AT 2 DRAW 5 VERTICAL LINES FROM 5 TO 10 AND REPEAT EVER Y 2; This command spe cifies the d rawing of five vertical l ines . The first line begins two horizontal gri d units to the right of the form origin and five grid units down from t he form [...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-23 BOX co m man d Spe cifying boxe s The B OX comm and is similar to the LINE command . It describes t he size and shape of a square or rectangular box . Like lines, b oxes may be repeated either at fixed intervals or a t specified locations. The origin of a box[...]

FORMS DE SCRIPTION LANGUAGE 3-24 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Exampl e: AT 4,6 BOX 24 BY 4 USI S HA HEA; This example creat es a shaded box: BOX com m a nd d e fa ul ts The d efau lt f or LINE S is SOLI D 1. The de faul t for REPEAT is HORIZONTALLY. 0 lines Specifying a line thickness of 0 is u seful for positioning[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-25 Example 2 AT .5,0 DRAW 4 BOXES IN INCHES 5 WIDE BY . 5 HIGH USING SHA DING AN D RE PEAT VE RTI CALLY EV ERY 2; This command specifies f our 5-inch wi de, 0.5-inch high b ars placed with the t o p edges at 0.5 inches, 2.5 inches, 4.5 inches, and 6.5 inches as [...]

FORMS DE SCRIPTION LANGUAGE 3-26 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE TE XT co mm an ds Font re qu ire ment At least one font must be spec ified before any text can be specif ied. The FONT setup comm and is used, and onl y one such command can be given for any one form . After the f onts are specified, they are referenced i[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-27 n Index num ber of the font to be u sed. If omi t ted, the system uses the last font index spec if ied in a TE XT comm and. If the font was omitted in a ll previ ous TEXT co mmands, the syst em uses the f irst font specified in the FONT command. y Coordinate [...]

FORMS DE SCRIPTION LANGUAGE 3-28 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Us ing t ogg le s Text orig inally entered at a 9700/870 0 keyboard may contain nu mber signs (##). The number sign acted as a toggle to enable the user to alternate between lowe r - and u ppercase characters. Previous ly, this was the only way to specify[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-29 Ce nte r- ali gne d To produce text that is c enter-ali gned, enter: TEXT AT 5,1 ‘FIR ST ’ ‘N ATIO NAL‘ ‘TR UST ’ ‘CO’; To center the stacked words (the default option), an alignment need not be specified. This c ommand p roduces t he followin[...]

FORMS DE SCRIPTION LANGUAGE 3-30 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Alig ning a t th e bo tto m To produce tex t that is a ligned at the bottom, enter: VERTIC AL TEX T ALIGN ED BOT TO M AT 5,1 ‘FIR S T ’ ‘N A TI ON A L ’ ‘TR UST ’ ‘C O’ ; This command results in the following: Other character-block orienta[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-31 F i gur e 3-14 . Character block orientations for a portrait p age denote s the p ositioning orig in of the text block. If the font and page have th e s a me orientation, letters appear upright. They appear sidewa ys or upside down if orientations differ. Tex[...]

FORMS DE SCRIPTION LANGUAGE 3-32 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE F i gur e 3-15 . Character block orientations for a landscape page denot es the positioning orig in of the text block.[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-33 TEXT I N BOX Specifying text in a box TEXT IN BOX allows you t o place text within a box. Use the following command format to pl a ce text in a box: d Amou nt of v ert ic al space occupi ed by a line of text . All specifications except lpi are actual line hei[...]

FORMS DE SCRIPTION LANGUAGE 3-34 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE This example prints the following text within the designated box: text Text charact ers that are to b e printed at t he s pecified location. Multiple text strings (a string is a series of charact ers) can be specified by enclosing each text string in sing[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-35 The f ollowing examples d emonstrate t hese nine po s itions. TO P LE FT T EXT ALI G NED LEFT F ONT 1 IN TOP L EFT BOX 10 ,20 ’PAR T NUMBER’ ; TOP CENTER TEXT ALI GNED CENTER FONT 2 I N TO P CENTER BOX 10,10 ’ PART NUMBER’ ; TO P RI GHT TEXT A LI GNED[...]

FORMS DE SCRIPTION LANGUAGE 3-36 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE BOT TOM LE FT TEXT AL IGNED L EFT FONT 1 IN BOTTO M LEFT BO X 20,1 0 ’ PAR T NUMBER’ ; BOTTOM CE NTER TEXT ALI GNED CENTER FONT 3 I N BOTTOM CENTER BOX 40,10 ’ PA RT NUMBER ’; BOTTOM RIGHT TEXT ALI GNED R IGHT FONT 1 IN BOTT OM RIGH T BO X 10, 4 0[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-37 Assuming that the upper left corner of the first box above is located two grid u nit s down from the form origin an d one grid unit to the r ight of the form o r igin, you woul d u s e the following statement s: The results of either statemen t are shown in f[...]

FORMS DE SCRIPTION LANGUAGE 3-38 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE LOGO co mmand P la c in g lo go s A complex figure called a logo, up to two square inches in size, can be digitized to order by t he Xerox Font Center or Xe r o x L imited. This logo is a special font of one or more characters, which carries with it the r[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-39 GRAPHIC command Us i n g grap hics A form may con sist solely of graphics (images ). Up to 16 i mages per page ar e perm itted. Int erpress and grap hics capab ility (Advanced Imaging S ubsystem— AIS), en able th e printing o f more than 16 images per page [...]

FORMS DE SCRIPTION LANGUAGE 3-40 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE F i gur e 3-20 . Placing a graphic SE CTION c ommand s Defining a section When a form consi s ts of several identical sections, you can save tim e by de fi ning only one section an d treat ing it as a modu le, that is, having it repeated at desired loc at[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-41 FORM SEC 4; PORTRAIT; GRID FMT8; FONT UN207B; COMMENT *** CREATE PHONE MESSAGE PAD SECTION ***; BEGIN SECTION PHON E; AT 7 DRAW 7 HORIZONTAL LINES FROM 4 TO 33 USING SOLID 1 AND REPEAT VERTICALLY AT 11,17,20,23,26,29; HORIZONTAL TEXT USING FONT 1 AT 2,4 ’PH[...]

FORMS DE SCRIPTION LANGUAGE 3-42 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE SECTION comman d syntax BEGIN SECTION Keywords PHONE ; Name of section. Rules for naming sections are identical to those for naming forms: one to six alphanum eric characters. END SECTION; Finishing c ommand. Notice that the END SEC TION comm and does n o[...]

FORMS DESCRIPTION LANGUAGE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-43 CO MMEN T co mmand Re c or d ing co m m e nt s It is f requently helpful t o i nclude comments in the source statements to describe certain FDL command s and their functions. These comments are useful when de bugging your program , and can act as reminders i [...]

FORMS DE SCRIPTION LANGUAGE 3-44 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE END command Te rm in at in g a n F SL The des cription of a form is t erminated with an END comm and. The comman d syntax is as foll ows: END; An FSL file can contain more than one file. Therefore, if additional FSL files follow an END command, the end of[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 4-1 4. 4 Compi ling and prin ting forms Once the file of forms sourc e library ( FSL) com mands has be en created, the file can be stored on the Doc uPrint 96/DocuP rint 96MX LPS system disk . T he next step is to compile the file and print a copy of the form. F orm pr i nting pr ocess ing [...]

COMP ILIN G AND PRINTI NG FORM S 4-2 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Co mmunicat e the FSL file to the LPS system disk Once you have created the FS L file, you can send it to the system disk e it her offline or o nline. Offline In the offli ne mode, FSL files can be transmitte d to the system disk from magnetic tape o[...]

COM PILIN G A ND PRI NTING FO RMS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 4-3 filen ame Specifies the name of an FDL source file in the FSL directory on the system disk that is to be used for source input to the FDL compil er. The file extension, .FSL, may be included ; no other extension is allowed. The file name may not be a ke[...]

COMP ILIN G AND PRINTI NG FORM S 4-4 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE C ompil ing 4850/4890 co lo r forms and lo go s Color forms created on a 4850 or 4890 LPS cannot be compiled on the DocuPrint 96/ DocuPrint 96M X LPS. However, a form or logo that was created and compiled on a 4850/4890 can be printed ( in monochrom [...]

COM PILIN G A ND PRI NTING FO RMS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 4-5 PROOF o ption The forms compiler makes it po ssible to compile a form and delete the FRM fi le after it has been pri nted. If you use this option, less disk space i s consum ed by resident f orm files. To invo ke the PROOF option, en ter the foll owing:[...]

COMP ILIN G AND PRINTI NG FORM S 4-6 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE • If the form names on the invocation line and in the FSL are different, the compilatio n is aborted and a single sheet is printed. It contains the heading for the page and the portion of the FSL that was processed before the security violation was[...]

COM PILIN G A ND PRI NTING FO RMS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 4-7 Storin g form files A large number of f orms may be sto r ed in the f orms source directory (uncompiled) and form direct ory (compiled) on the system d isk s. Two files with the same name may not , however, be stored in t he sam e directory. The number [...]

COMP ILIN G AND PRINTI NG FORM S 4-8 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 5-1 5. 5 Forms lay out consi derations Physical printer const r aints and forms com piler method s are factors that can affect form desig n. This chapter ex plores the implications of these factors relative t o the following: • Image c omple xity • Boxes • Shadi ng • Sections • Ro[...]

FORMS LAYOUT CONSIDERATIONS 5-2 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Genera lly, the line table limits a r e r e ached because the f orm conta ins a large num ber of short line segm ents. The m ost probable reason for this is a series of vertical lin es that are aligned vertically (for exam ple, tick ma rk s) or ho rizonta[...]

FORMS LAYOUT CONSIDERATIO NS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 5-3 In add ition, it is possible t o have the li ne table s how m ore than one line passing in the same direction through a given coordinate. For example, draw t hree lines, e ach of which is five units in length (0 to 5, 10 to 15, and 20 to 25). Then draw tw o [...]

FORMS LAYOUT CONSIDERATIONS 5-4 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Scan line de nsity “Scan line” density is d epende nt upon printer speed and imaging speed. T herefore, it can vary wi th each product an d eve n with different configurations of the same product. The basic limitation is linked to dispatchable it ems,[...]

FORMS LAYOUT CONSIDERATIO NS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 5-5 Land scape p ages Line density restrictions differ as a f unc tion of the mode (landscape or portrait) of t he form. An 8-point or s maller landscape font is s maller than 32 dots for 300 spi and 64 d ots for 600 spi. A verti cal line is a single dispatchabl[...]

FORMS LAYOUT CONSIDERATIONS 5-6 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Loca l densit y and p age set up err ors One problem that may occur while a page i s being imaged is a page setup error, di splaying t he following m essage: OS9300 PAGE SET-UP ERROR This message bas ically means that there was not enough time to image a [...]

FORMS LAYOUT CONSIDERATIO NS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 5-7 Summa ry In general, you can o ptimize form generation in the following manner: • Use lines and boxes rather t han characters of the form element font, whenever possible . • Avoid placin g too many small characte rs in one area of the page. • Avoid ove[...]

FORMS LAYOUT CONSIDERATIONS 5-8 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Us ing bo xes You may draw boxes with a sin gle BOX comm and or construct them with comm ands on a line-by -line basis. Note: Using the B OX c ommand c an ha ve a negati v e aspect when a single com mand is us ed to specify a box that is adj oined to anot[...]

FORMS LAYOUT CONSIDERATIO NS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 5-9 Lo c at ing th e cl os es t bo x When y ou spe c ify text t o be placed in a b ox, the system lo cates the closest box within a ten-dot square of the specified point. Exampl e: If text is to be placed i n a box located two grid units b y two grid units from [...]

FORMS LAYOUT CONSIDERATIONS 5-10 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Figure 5-5 shows measurements used in computing vertical box errors. F i gur e 5-5. Measur ements us ed in compu ting verti cal box errors The res ult of this equation i s round ed up a nd d isplayed in the e rror messag e. Thus, what the error message ac[...]

FORMS LAYOUT CONSIDERATIO NS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 5-11 The statements below provide an exam ple of how this technique is used ( a lower c ase b with an overstrike over it represents a bl ank line ). TEXT SPAC ED A T 4 D OTS IN BOX 10, 1 0 As many blank li nes may be used be fore, between, and after lines of tex[...]

FORMS LAYOUT CONSIDERATIONS 5-12 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Shad ing It is sometime s desirable to use shading in a form, but it requir e s using a large amount of the f orm image buffer. Also, the space used increases if portrait rather than lan dsca pe shading is used. Lands cape sh ading The basic element used [...]

FORMS LAYOUT CONSIDERATIO NS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 5-13 Sect ions To duplicate identical information on a page, create sec tions . However, form image buffer limitations and potential li ne density problems should be taken into account whenev er this feature is used. A form comprised of many sections often tak e[...]

FORMS LAYOUT CONSIDERATIONS 5-14 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Ro undin g meas ur ement s Laser printing systems use only dot units in the actual performance of forms compilation. Therefore, as long as all positioning commands within FDL are defined in terms of dots or an integral nu mber of dots, there are no roundi[...]

FORMS LAYOUT CONSIDERATIO NS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 5-15 Ro un di ng v ar iabl e d ata Al ignme nt p rob lem s Under certain c ircumstances, a form and variab le data do not align properly, even though it app ears that bot h us e the sa me line s pacing. When thi s h appens, it m ay be the result of the effects o[...]

FORMS LAYOUT CONSIDERATIONS 5-16 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE If variable da t a does not li ne up properly w ith a form, an d it appears that both are using t he same line spacing, find out what the dot value is. It is most likely in s uch cases that the diffi culty is a variation in defining the coordinate system [...]

FORMS LAYOUT CONSIDERATIO NS XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 5-17 Tab le 5-1 shows tips, tri cks, an d pitfa l l s. Table 5 -1. Tips, tricks, and pitfall s Key wor ds Ex plan atio n Form id Develop a logical, systematic approach to naming conventions. Take c are not to choose a previous ly used f orm id. GRID comman d Cho[...]

FORMS LAYOUT CONSIDERATIONS 5-18 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE Syn tax ambi guitie s Because FDL ke ywo rds can be abbreviated to the first three characters and because certain two-charact er keywords can be interpreted in m ore th an one w ay, the following k nown amb iguities exist: • IN (preposition) is i nterpr[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 6-1 6. 6 Coding a complex form This chapter reviews the c o mmands discuss ed earlier in t h is guide and it also illustrates a sample form alo ng with t he entire f orms source library (FSL) that c reated it. Enter the com mands as s hown in the sam ple FSL to prod uce the form. Getti ng s[...]

CODING A COMPLEX FORM 6-2 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Wri ti ng the setu p commands The setup comm ands precede th e form description com ma nds for lines, boxes, and text. In g eneral, the setup comm ands spec ify the parameters which describes the form. Invoke t he editor utility a nd ente r the comm ands s h ow[...]

CODING A COMPLEX FORM XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 6-3 Drawin g lines LINE comman ds are used to construct horizontal and vertical lines, which in turn are used t o const ruct boxes. Draw in g hor iz o nt al lin es Enter the horizontal line comma nds shown in figure 6-4. Rem ember that you have the option of abbreviati[...]

CODING A COMPLEX FORM 6-4 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Drawin g boxes The BOX com mand enabl es you to construct individual, stand-al one boxes or boxes that share common s ides. You can also create a shaded area or construct an invisible box to conveniently place “floating” text such as titles. Enter the CO MM[...]

CODING A COMPLEX FORM XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 6-5 Placi ng text at a locatio n The TEXT AT comman d enables you to place text at an exact location. Enter the COMM ENT and TEX T AT comm and as shown in figure 6-7. F i gur e 6-7. TEXT AT command FORM 1STFRM GRID FMT1; FONTS UN114A,UN106A,UN104C; AT 7 DRAW 18 LINES F[...]

CODING A COMPLEX FORM 6-6 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Placi ng text in a box The TEX T IN BOX com mand allows you to place text at a pa rticular location within a box that was previously described . Enter the COMM ENT and TEXT IN BOX comm and as s hown in figure 6-8. F i gur e 6-8. TEXT IN BOX co mmand FORM 1STFRM[...]

CODING A COMPLEX FORM XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 6-7 END comm and The END command is shown in fi gure 6-9. Enter END; t o complete the t as k F i gur e 6-9. END command FORM 1STFRM; GRID FMT1 FONTS UN114A,UN106A,UN104C; COMMENT *** DRAW HORIZONTAL LINES ***; AT 7 DRAW 18 LINES FROM 0 TO 132 USING HAI AND REPEAT EVE 3[...]

CODING A COMPLEX FORM 6-8 XEROX DOCUPRINT 96/D O CUPRINT 96MX L PS FORMS CREAT ION GUIDE Comp iling the form This ex ercise gives you prac tice u s ing most of the FD L comm ands discussed t hroughout this guide. The next step is to compi le t he FSL which produces a sa mple of the form, provided there are no s yntax errors. The summary statem ent [...]

CODING A COMPLEX FORM XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 6-9 F i gur e 6-10 . Source statement (1STFRM.FS L) FDL VERSION B03 11:17 30-APR-XX PAGE 1 DISK-ID: ARIEL VX.7 R9.7 REL #6 XX/XX/XX 1 FORM 1STFRM; 000010 2 GRID FMT1; 000020 3 FONTS UN114A,UN106A,UN104C; 000030 4 COMMENT *** DRAW HORIZONTAL LINES ***; 000040 5 AT 7 DRA[...]

CODING A COMPLEX FORM 6-10 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE A-1 A. A FDL comm and summary This appendix contai ns an alphabetized s ummary of the forms description language (FDL) com mands described in this manu al. The conventions and defi nitions used in describing FDL comma nds are as follows : F D L co mma nd synta x Table A-1 lists in alphabet [...]

FDL COMMAND SUM MARY A-2 XEROX DOCUPRINT 9 6/DOCUPRINT 96M X LPS FORMS CREATION GUIDE Table A-1. FDL com man d syntax Command Synt ax BOX COMMENT CO MMENT text END END; FO NT FON T[ S] id {… id } ; FO RM FOR M id ; GRAPH IC GRAP HIC name A T vp os [un it] [SCALE [IS] n[/ d ]]; GRID format-id n inch[es] n CM n CENTIMETERS n CPI n LP I [ n ] DOTS[[[...]

FDL COMMAND SUMMARY XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE A-3 LANDSCAPE/ PORTRAIT LINE Table A-1. FDL com man d syntax (continued) Command Synt ax LANDSCAPE PORTRAIT PAPER [SIZE] [I S] n DOTS XDOTS INCH[ES] CM CENTIMETERS [WIDE] [BY] m DOTS XD O TS INCH[E S] CM CENTIMETERS [HIGH] ; n vi rtual pag e width m vi rtual page height[...]

FDL COMMAND SUM MARY A-4 XEROX DOCUPRINT 9 6/DOCUPRINT 96M X LPS FORMS CREATION GUIDE LOGO L OGO id AT y [unit] x [unit] PAPER For standard pape r sizes: For no nstandard p aper sizes: SEC TION [BEG IN ] SEC T ION id ; END SECTION; DO SECTIO N id AT y [unit] x [unit] ; TEXT AT AT y [unit] x [unit] ‘text’ [‘ text] …; LPS task invo ki ng comm[...]

FDL COMMAND SUMMARY XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE A-5 TEXT IN BOX Table A-1. FDL com man d syntax (continued) Command Synt ax[...]

FDL COMMAND SUM MARY A-6 XEROX DOCUPRINT 9 6/DOCUPRINT 96M X LPS FORMS CREATION GUIDE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE B-1 B. B F DL-gen erated mes sages These mess ages may appear whi le forms are being c ompiled using the forms description language (FDL) compiler. FD0900 OPERATOR-REQUESTED ABORT ABORT comm and was entered. Compiling is stopped. FD1000 ALL FORMS COMPILED. FORMS COMPILER EXITING. FDL f ile [...]

FDL-GENERATED M ESSAGES B-2 XEROX DOCUPRINT 9 6/DOCUPRINT 96M X LPS FORMS CREATION GUIDE FD2740 FSL NOT FOUND OR INVALID OPTION. CHECK AND RETRY. The spec ified f o r ms so urc e library (FSL) file does not exist on the system disk or the option is invalid. Compi ler aborts. 1. Check for correct file name. 2. Create FSL file on disk if necessary. ([...]

FDL-GENE RATED MESSAGE S XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE B-3 FD9480 ERRO R IN WR ITIN G TH E LI STI NG/S UMMA RY F ILE FD9485 ERRO R IN RE ADIN G TH E LI STI NG/S UMMA RY F ILE FD9490 ERRO R IN BA CK-S PACI NG T HE LIST ING/ SUMM ARY FILE FD9510 ERRO R IN CL OSIN G CONT EXT F ILE FD9520 ERRO R IN OP ENIN G CONT EXT F ILE [...]

FDL-GENERATED M ESSAGES B-4 XEROX DOCUPRINT 9 6/DOCUPRINT 96M X LPS FORMS CREATION GUIDE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE C-1 C. C System de fault summary This appendix lists the default parameters that the system automatical ly substitute s when specifications are o mitted in F DL command s. Grid unit dimens ions are rounded to the nearest tenth. The following grid and origin substitutions are m ade when prin[...]

SYSTEM DEFAULT SUM MARY C-2 XEROX DOCUPRINT 9 6/DOCUPRINT 96M X LPS FORMS CREATION GUIDE The following grid and origin substitutions are m ade when printing on 8.5 by 14-inch paper. The following grid and origin substitutions are m ade when printing on A4 (8.27 by 11 .69-inch) pap er. Spec i fication S ubstitution FMT12 LANDSCA PE; GRID UNIT IS 13.[...]

SYSTEM D EFAULT SUMMA RY XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE C-3 The following subs titutions are made for all paper sizes. Spe ci ficati on Substitution F OR M i d ; F OR M i d ; G RI D FM T 1; F OR M i d ; P OR T RAI T ; F OR M i d ; P OR T RA IT ; GR ID F M T6; Page orien tation not specified Lands cape PAPER SIZE not s p [...]

SYSTEM DEFAULT SUM MARY C-4 XEROX DOCUPRINT 9 6/DOCUPRINT 96M X LPS FORMS CREATION GUIDE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE D-1 D. D GRID and TEXT command exampl es This appendix shows the grid unit scali ng specifica tions when the grid parameters are omitted or spe cified. Table D -1. Grid unit scaling sp ecificati ons Grid u nit sp ecification System resp onse Omitted: defaul t scaling When t he system receiv[...]

GRID AN D TEXT CO MMAND E XAMPL ES D-2 XEROX DOCUPRINT 9 6/DOCUPRINT 96M X LPS FORMS CREATION GUIDE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE E-1 E. E F D L capacit y limits The available mem ory space imposes the following maximum s for use: Text B uffer capac it y: 512 by tes Lines per TEXT statem ent: 64 Spac e allocation TEXT A T command: 16 b ytes + S1 + S2 . . . Sn TEXT IN BOX comm and: 18 b ytes + S1 + S2 . . . Sn (1st box[...]

FDL CAPA CITY LIMI TS E-2 XEROX DOCUPRINT 9 6/DOCUPRINT 96M X LPS FORMS CREATION GUIDE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE F-1 F. F Support to ols and meas urements There are two s eparate funct ions of forms creation: f orms design and forms d escripti on. Any form can be converted to a n e lectronic form stored on the s ystem by des cribing it in Forms Des cription Languag e (FDL). Forms design involves layin[...]

SUPPORT TOOLS AN D MEASURE MENTS F-2 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE[...]

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE GLOSSARY-1 Gloss ary A3 Paper size measuring 297 by 420 mm. A4 Paper size measuring 210 by 297 mm. abort To term inate the printing of a job or execut ion of a program before it comple tes. algorithm Com putational procedure that can be repeated any number of t imes. alignmen t Positioning [...]

GLOSSARY GLOSSARY-2 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE backg round job Low-priority job, usually b atched, that is execu ted automatic ally as system res ources become av ailable. backu p file Fil e c opied to a storage medium for safekee ping in case the original is dama ged or lo st. ban d Rec tangular area i n printer [...]

GLOSSARY XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE GLOSSARY-3 bl ocking Process of combi ning two or more records into a single block o f data which can then be moved, operated upon, or stored, as a single unit by the comp uter. bl ock l eng th Number of charac ters or bytes contained in a block of data (the block is treated as a u[...]

GLOSSARY GLOSSARY-4 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE character code identifier Code as sociated w ith the universal identifier “X e rox” to i ndicate the version of the Xe r o x cha r a cter code standard used to code Interpress stri ngs. chara cter set Number of different characters use d by a particular device, in[...]

GLOSSARY XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE GLOSSARY-5 communi cations A bilit y o f two de v ic es to tr an smi t inf or m a tio n to ea c h o the r. co mpatibil ity Charact eristic of computer equipment permitting one device to use the same information or programs as another device without conversion or code modification. [...]

GLOSSARY GLOSSARY-6 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE CPU central processing unit. Interprets and executes instructions, performs all operations and calculation s, and controls input and output units and auxiliary attachments . dat a 1. In general , facts, numbers, lett ers, symbols, and so on, which can be processed or [...]

GLOSSARY XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE GLOSSARY-7 di gi tiz e To express or represent data in digit al (binary) form so t hat i t can be processed e lectronically. di s k dr i ve Device that c an read or write magne tic media. di spl ay Viewing devi ce (monitor) th a t vi sua lly co mmuni ca te s syst em warnings, statu[...]

GLOSSARY GLOSSARY-8 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE ex te nde d m et ric s Me asureme nts used in Interpress to alter the size of fonts, al lowing more precisi on with c haracter escapem ent. Used for rende red characters. FCB f orms con trol buffer. Buffer for con trol ling the v ertical format o f printed output. FDL[...]

GLOSSARY XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE GLOSSARY-9 format 1. Layout of a docum ent, including margins , page length , line spacing, typefac e, and so on. 2. In data storage, the way the surface of a di s k i s organized to store dat a. 3. To p r e pare the surfac e of a disk for accept ance o f data. form feed K eyboard [...]

GLOSSARY GLOSSARY-10 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE HCS high-capacity stacker. St acker bin capable of holding 2500 sheet s of 20 pound/75 gsm paper. In the LPS, the high-capacity stacker bins are locate d in the top ha lf of t he fee der/stacker modul es. hexadecim al Numbering system w ith a base of 16. I n this sys[...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-11 in te rpo lat i on Series of logical rules impleme nted in the printer to convert a 300 spi input video stream to a 600 spi o utput video stream. Interpolation is functionally an alogous to bit doubling (2x sc aling), exce pt the logical rules result i n superior out[...]

GLOSSARY GLOSSARY-12 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE lands ca pe pag e ori ent at i on Orientation of pri nt lines or top of an i llustrati on parallel t o the lon g edge of the paper if the sheet is within t he standard size range. (Sheets larger t h an standard have the reverse print orientation.) lang uag e Defined [...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-13 log Coll e c tion o f messages or message s egments p laced on an au xiliary storage device for accounting or data collection purposes. logi ca l pag e In the Xerox printing systems environm ent, a formatted page that is smaller than the physical pa ge. A logical pag[...]

GLOSSARY GLOSSARY-14 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE menu Li st of a vailable funct ions, com mands, and options. m essage Unit of information trans mitted by one facility to another in a form that the receivi ng facility can u nderstand an d act u pon. T he standa rd messag e format consists of a head er (cont aining [...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-15 offse t pri nt i ng Widely-used m ethod of com mercial and corporat e printing, where i nk is picked up by a metal or paper plate, passed to an offset d r u m, and then p assed to the pape r. onl i ne Devices u nder the direct control of a central p roc essing u nit,[...]

GLOSSARY GLOSSARY-16 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE pag e ori e nta ti on Direction in which dat a is printed on a rep ort. See also landscape page orientation; portrait page orientation. par amet er Part of a command, other than t h e keyword. See also keyword; operator com mand. pass -thr ough job On systems with XP[...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-17 print f ile Position of t he syst em disk m emory (up to 4 MB) rece ived fo r temporary storage of formatted pages for pri n ting. Pages are retained until they are delivered to the output tray . pri nt out I nf orm al express ion referring to almost anything printed[...]

GLOSSARY GLOSSARY-18 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE rec ord Coll e ction of data or words treated as a unit. recover y Act of overcoming a problem or error during processing. Typica lly, a specialized sof tware recovery ro utine gains c ontrol and attempts t o resolve the error without cra shing the system. rem ote ac[...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-19 sequen t ial In numeric sequence, usually in ascendin g order. As ap plied to a file organization, describes files in which records are written one after another and cannot be r a ndomly accessed. For exam ple, the first 99 records in a sequent ial file-access file h[...]

GLOSSARY GLOSSARY-20 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE stock User-defined name i n the JSL that specifies a certain type o f paper for prin ting a job. See also cluster. stockset Collection of stocks to be used on a pri nt job. See also st ock; cluster. storag e Retention of information. Primary st o rage refers to inter[...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-21 tab To move the cursor on a displ ay or printer to a prespecified column on the display or paper, most of ten by using t he <TAB > key on a keyboard. tape Recording media for data or comput er program s. Tape can be in permanent form, such as perforated paper t[...]

GLOSSARY GLOSSARY-22 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE transaction processing Me t hod o f data proces sing in which files are updated and resul ts are generated imme diately after data entry. translation 1. In dat a commu nications, the conversion o f one code to another on a character-by-character bas is. 2. In program[...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-23 virt ual pag e Page area selected by a f orms desig ner for printing. warni ng m essage System -issued m essage indicating that an error has been encountered even tho ugh the program has not failed. weight Charac teristic of type determined by how light or d ark it a[...]

GLOSSARY GLOSSARY-24 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE bpi bi ts per inch bps bit s per second BSC binary synchro nous comm unicat ions CD character dispatcher CDC control da ta com munications CD/IG charact er dispatcher/ image generat or CM control modul e CME copy m odification entry cpi characters per i nch CPU centr[...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-25 DT E data term inal equi pment EBCDIC Extende d Binary Coded Decim al Intercha nge Code EN ET Ethernet network EOT end of tape EP electronic publishing ESS ele ctronic s ub system, also re fe rred to as t he syst em contr o lle r FCB f o rms control buffer FCG finish[...]

GLOSSARY GLOSSARY-26 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE hpos hori zontal positioni ng IBM International Business Machines Corporation IF U Interpress font utility IG image generator IGM image generator module I/O i nput/outp ut IOM image output module IOT input out p ut terminal, also referred t o as “printer” IPD In [...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-27 LF long-edge feed lpi lines pe r in c h LPS Laser P rinting S ystem MT U magnetic t ape unit (refers to the 9-trac k magnet ic tap e drive; also referred to a s “magnet ic tape drive”) MICR M agnetic Ink Character Recognition OCR optical c harac ter recognition O[...]

GLOSSARY GLOSSARY-28 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE QIC 1/4 in ch cartridge RAM random a ccess memory RO S raster output scanner SAFES st and-alone field engineering sof tware SAN software analysis number sci START com man d index SCS I small com puter s ystem in terface SDLC synchronous data link control SEF short -e[...]

GLOSSARY XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE GLO SSARY-29 VM vi r t ual me mor y vpos vertical po sitioning VS virtual storage WAN wi de area network XCSC Xerox Custom er Suppo rt Center XDGI Xerox DCF an d GDDM Interface XDSS Xerox Documentation and Software Service s XIC S Xerox I ntegrated Compos ition Sys t em XJCF Xero[...]

GLOSSARY GLOSSARY-30 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE[...]

XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE IN DEX-1 Ind ex Numerals 600 spi form s, comp ilin g, 4-3 4850 color box, converting, 3-25 4850/4890 color f orms/logos, compil ing, 4-3 9700/8700 keyboard, 3-28 A absolute coordinate, 3-16 aligning text, 3-28, 5-15 to 5-16 adjacent boxes, 3-36 to 3-37 B B4 pa per size, u sing, 3-7 bottom[...]

INDEX INDEX-2 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE F FDL capacity limits, E-1 command s see also sp ecif i c commands COMM ENT command, 3-43 description, 3-16 to 3 -39 END com mand, 3-44 entering, 3-4 for m a t , 3 - 3 SECTION, 3-40 to 3-41 setup, 3-5 to 3-15 summary, 3-2, A-1 to A-5 syntax, A-1 to A-5 unit o f measureme nt[...]

XEROX DOCUPRINT 96 /DOCUPRINT 96MX LPS FORMS CREATI ON GUIDE IN DEX-3 INDEX L landscape fon ts , 2-2 to 2- 3 for m , 3 -9 line den sity limitations , 5-5 page, 2 -1, 2-10 shading, 5-12 LANDSCAPE/ PORTRAI T command, 2-5, 3-9 laser beam, 1-2 layout con siderations, 5-1 to 5-18 left-aligned text, 3-28 LINE comman d, 3-18 to 3-22 line tables criteri a [...]

INDEX INDEX-4 XEROX DOCUPRI NT 96/DOCUPRINT 96MX LPS F ORMS CREATION GUI DE S SAMPLE comm and, 4-7 sample form, creating, 6-1 to 6-10 scan line density, 5-4 to 5-5 SECTION com mands, 3-40 to 3 - 42 sect ions , 5-13 secured files, 4-5 SEF (Short Edge Feed) schem e, 3 - 8 setup commands , 3-5 to 3-15, 6-2 to 6-7 shading, 3-25, 5-12, 5-17 SHIFT comm a[...]