Yamaha HTR-5630 Bedienungsanleitung

OWNER’S MANUAL HTR-5630 U A V Receiver 0100V340(U)-cv1 03.3.10, 3:54 PM 1[...]

I CA UTION IMPOR T ANT SAFETY INSTRUCTIONS CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CO VER (OR BACK). NO USER-SER VICEABLE P ARTS INSIDE. REFER SER VICING T O QU ALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to[...]

CA UTION II 1. IMPOR T ANT NO TICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not e xpressly approved by Y amaha may void your authority , gr anted by the FCC, to use the product. 2. IMPOR T ANT : When connecting this product to accessories[...]

1 T o assure the finest perf ormance, please read this manual carefully . K eep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry , clean place — awa y from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the le[...]

1 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION CONTENTS INTRODUCTION CONTENTS ............................................................ 1 FEA TURES ............................................................. 2 GETTING ST ARTED ............................................ 3 Supplied accessor[...]

2 Manufactured under license from Dolby Laboratories. “ Dolby ” , “ Pro Logic ” , and the double-D symbol are trademarks of Dolby Laboratories. FEA TURES Multi-mode digital sound field processing ◆ Dolby Pro Logic/Dolby Pro Logic II decoder ◆ Dolby Digital/Dolby Digital + Matrix 6.1 Decoder ◆ DTS/DTS + Matrix 6.1 Decoder ◆ CINEMA DS[...]

3 English INTRODUCTION Installing batteries in the remote control Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity markings (+ and – ) inside the battery compartment. 1 Press the part marked with a and slide off the battery compar tment cover . 2 Insert the two batteries supplied (AA[...]

4 CONTROLS AND FUNCTIONS Front panel 1 ST ANDBY/ON T urns the unit on, or sets it in standby mode. When you turn the unit on, you will hear a click and there will be a 4 to 5-second delay before it can reproduce sound. Standby mode In this mode, the unit uses a small amount of po wer in order to receiv e infrared-signals from the remote control. 2 [...]

5 English INTRODUCTION w STEREO (EFFECT) Switches between normal stereo and DSP effect reproduction. When you select STEREO, the unit mixes down all Dolby Digital and DTS signals (e xcept the LFE channel) as well as those 2-channel signals without effects, to the main left and right speak ers. e PROGRAM l / h Select the DSP program. r A/B/C/D/E Sel[...]

6 SYSTEM POWER ST ANDBY POWER AV POWER TV POWER TV ENTER +10 0 9 STEREO /DTS 8 7 6 5 MOVIE2 MOVIE1 TV THTR MUSIC 4 3 2 1 ENTERT AINMENT ROCK JAZZ HALL V-AUX VCR D-TV/CBL DVD SLEEP TUNER MD/CD-R CD TV AMP CODE SET MUTE INPUT MUTE REC 6CH INPUT AUDIO DISC SKIP VOLUME + – + – + – CH VOL SET MENU SELECT PRESET/CH A/B/C/D/E LEVEL MENU TEST RETURN [...]

7 English INTRODUCTION Appro ximately 6 m (20 feet) ■ Using the remote control The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation. ■ Handling the remote control • Do not spill water or other liquids on the remote control. • Do no[...]

8 V-AUX VCR D-TV/CBL DVD MD/CD-R TUNER CD MA TRIX DIGIT AL PL PL PCM SILENT DSP HiFi NIGHT VIRTUAL AUTO STEREO SLEEP VOLUME MUTE MEMORY TUNED L C R RL LFE RC RR ~~~~~~~~~~~~~~ dB ft CT RT PTY PS HOLD PTY EON 13 45 8 7 6 2 90 q w y er u i o p a t 1 Processor indicator s The indicators for the various decoder s light up when the decoders are in use. [...]

9 English PREP ARA TION CONNECTIONS Before connecting components CA UTION Do not connect this unit or other components to the mains po wer until all connections between the components hav e been completed. • Be sure all connections are made correctly , that is to say L (left) to L, R (right) to R, “ + ” to “ + ” and “–” to “–”[...]

10 AUDIO L R 2 1 AUDIO VIDEO TUNER L R CD DVD AM ANT GND FM ANT IN (PLAY) MAIN DVD CD DIGITAL INPUT SUB WOOFER CENTER SUB WOOFER MONITOR OUT SURROUND OPTICAL COAXIAL OUT (REC) MD /CD-R D-TV /CBL V-AUX IN VCR OUT 6CH INPUT OUTPUT 75 Ω UNBAL. VIDEO INPUT AUDIO OUTPUT LR AUDIO INPUT LR O OPTICAL OUTPUT VIDEO OUTPUT AUDIO OUTPUT L V R V V AUDIO OUTPU[...]

11 English PREP ARA TION Connecting audio components ■ Connecting a CD play er Connect the coaxial digital output jack on your CD player to the DIGIT AL INPUT CD jack on this unit. y • Use the A UDIO jacks on this unit to connect to a CD player that does not hav e a COAXIAL DIGIT AL OUTPUT jack, or to record from CD players. ■ Connecting a CD[...]

12 ■ Connecting the AM loop antenna 1 Set up the AM loop antenna, then connect it to the terminals on this unit. 2 Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals. 3 Orient the AM loop antenna for the best reception. Notes • The AM loop antenna should be placed away from this unit. • The AM lo[...]

13 English PREP ARA TION Connecting an external decoder This unit is equipped with 6 additional input jacks (MAIN left and right, CENTER, SURR OUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a D VD/SA CD player. Note • When you select 6CH[...]

14 Connecting the speakers ■ Speakers This unit has been designed to provide the best sound- field quality with a 5-speak er system, using main left and right speakers, rear left and right speakers and a center speaker . If you use dif ferent brands of speakers (with different tonal qualities) in your system, the tone of a moving human v oice and[...]

15 English PREP ARA TION 10 mm (3/8 ” ) Red: positive (+) Black: negative ( – ) Banana plug CONNECTIONS 12 ■ Connections Be sure to connect the left channel (L), right channel (R), “ + ” (red) and “–” (black) in accordance with the markers on this unit, the speakers, and the speaker cables. If the connections are faulty , no sound w[...]

16 Subwoofer system Main B speaker Center speaker Right Rear speaker SUBWOOFER jac k When using a subwoofer with b uilt-in amplifier , including the Y AMAHA Activ e Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. This unit will direct lo w bass signals distributed from the main, center and/or rear cha[...]

17 English PREP ARA TION Connecting the power supply cords ■ Connecting the A C power cor d Plug in this unit to a wall outlet. ■ V OL T A GE SELECTOR (General model only) The V OL T A GE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the A C main supply . V oltages are 110V - 120V/220V -240[...]

18 Using the basic menu Use the remote control to make adjustments. • Press SPEAKERS A/B on the front panel to select the main speakers you want to use, and set SPEAKERS ON/OFF to the ON position. • Make sure you disconnect headphones from this unit. 1 Press AMP . 2 Press SET MENU . “ B ASIC MENU ” appears on the front panel display , as sh[...]

English 19 PREP ARA TION SET MENU B ASIC SOUND INPUT OPTION 1 SETUP Press j / i to alter the settings for each parameter . Use d to mov e to the next setting. 2 SP LEVEL Press j / i to adjust the balance between each speaker and the left main speaker . Use d to mov e to the next setting. 1 ROOM Choose from S/M/L. 2 SUBWOOFER Choose either of YES/NO[...]

20 Setting the unit to match your speaker system Follo w the instructions below to set the amplif ier output to match the size of your room and speakers. Press u / d to cycle through parameters 1 through 4, and j / i to alter the parameter setting. Factory default settings are highlighted. 1 ROOM Settings: S, M , L Select the size of the room you h[...]

English 21 B ASIC OPERA TION PLA YBACK 1 Press ST ANDBY/ON (SYSTEM PO WER on the remote control) to turn on the po wer . 2 T urn on the video monitor connected to this unit. 3 Press and set SPEAKERS ON/OFF inward (ON). 4 Press and set SPEAKERS A/B inward (A) or outwar d (B) to select the main speakers y ou want to use . 5 Press INPUT l / h repeated[...]

22 ■ BGV (backgr ound video) function The BGV function allows you to vie w images from a video source together with sounds from an audio source. For example , you can enjoy listening to classical music while watching beautiful scenery from a video source on the video monitor . Select a source from the video group, then select a source from the au[...]

English 23 B ASIC OPERA TION Input modes and indications This unit is equipped with 2 types of input jacks for the CD and D VD sources only . Y ou can select the type of input signals you wish to use. Each time you turn on the unit po wer, the input mode is set to the “ INPUT 2 INPUT MODE ” setting defined in the set menu. Press INPUT MODE repe[...]

24 Selecting a sound field program Y ou can enhance your listening experience by selecting a DSP program. For details about each program, see pages 27 – 30. 1 Press AMP . 2 Press one of the numeric b uttons on the remote control to select the desired program. The name of the selected program appears on the front panel display . AMP 3 After select[...]

English 25 B ASIC OPERA TION The display cycles as follo ws each time you press q / DTS: PR O LOGIC → PRO LOGIC Enhanced → PRO LOGIC II Movie → PR O LOGIC II Music → PR O LOGIC → .... y • Y ou can select PRO LOGIC, PR O LOGIC Enhanced, PR O LOGIC II Movie, and PR O LOGIC II Music by pressing PR OGRAM l / h on the front panel repeatedly [...]

26 Notes • If you turn off the sound ef fects, no sound is output from the center speaker or rear speakers. • If you turn off the sound ef fects while the unit is reproducing sound from a Dolby Digital or DTS signal, the dynamic range of the signal is automatically compressed and the unit will mix the sounds of the center and rear speaker chann[...]

English B ASIC OPERA TION 27 DIGIT AL SOUND FIELD PROCESSING (DSP) Understanding sound fields A sound field is def ined as the “ characteristic sound reflections of a particular space. ” In concert halls and other music v enues, we hear early reflections and rev erberations as well as the direct sound produced by the artist(s). The v ariations [...]

28 CINEMA-DSP Sound design of CINEMA-DSP Filmmakers intend for the dialog to be located right on the screen, the ef fect sound a little farther back, the music spread ev en farther back, and the surround sound around the listener . Of course, all of these sounds must be synchronized with the images on the screen. CINEMA-DSP is an upgraded version o[...]

English B ASIC OPERA TION 29 ■ For movie pr ograms No. 7 8 9 Features This program creates the extremely wide sound f ield of a 70-mm movie theater . It precisely reproduces the source sound in detail, making both the video and the sound field incredibly real. This is ideal for an y kind of video source encoded with Dolby Surround, Dolby Digital [...]

30 Sound field effects The 6-channel soundtracks found on 70-mm f ilm produce precise sound field localization and rich, deep sound without using matrix processing. This unit ’ s MO VIE THEA TER programs provide the same quality of sound and sound localization that 6-channel soundtracks do. The b uilt-in Dolby Digital or DTS decoder brings the pr[...]

English B ASIC OPERA TION 31 TUNING 4 Press PRESET/TUNING l / h once to begin automatic tuning. Press h to tune in to a higher frequency , or press l to tune in to a lower frequenc y . When the unit is tuned in to a station, the “ TUNED ” indicator lights up and the frequency of the station receiv ed is shown on the front panel display . ■ Ma[...]

32 Presetting stations ■ A utomatically presetting stations (for FM stations) Y ou can use the automatic preset tuning feature to store FM stations. This function enables the unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order . Y ou can then recall any preset [...]

English B ASIC OPERA TION 33 4 Press PRESET/TUNING l / h to select a preset station number (1 to 8) while the “ MEMOR Y ” indicator is flashing. Press h to select a higher preset station number . Press l to select a lo wer preset station number. 5 Press MEMOR Y (MAN ’ L/A UT O FM) on the front panel while the “ MEMOR Y ” indicator is flas[...]

34 ■ Exchanging preset stations Y ou can exchange the assignment of tw o preset stations. The example belo w describes the procedure for exchanging preset station “ E1 ” with “ A5 ” . 1 Select preset station “ E1 ” by using the A/B/C/D/E and PRESET/TUNING l / h . See “ Selecting a preset station ” at left. 2 Press and hold PRESET/[...]

English B ASIC OPERA TION 35 Use this feature to automatically set this unit in standby mode after the amount of time you hav e set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer can only be set with the remote control. y • By connecting a commercially av ailable timer to t[...]

36 Recording adjustments and other operations are performed on other recording components. Refer to the operation instructions for these components for details on their operation . 1 T urn on the power of this unit and all connected components. 2 Select the source component y ou want to record fr om. 3 Start playback (or select a br oadcast station[...]

37 English AD V ANCED OPERA TION Adjusting the items on the set menu Use the remote control to make adjustments. y • Y ou can change set menu parameters while the unit is reproducing sound. • Y ou can use NEXT and SET MENU +/ – on the front panel to change these settings, if the unit is not set to TUNER mode. Press NEXT to select the category[...]

38 6 Press j / i once to enter the setup mode of the selected item. The last setting you adjusted appears on the front panel display . Depending on the menu item, press u / d to select a sub item. 7 Press j / i repeatedly to change the menu item setting. 8 Press u / d repeatedly until the men u disappears or just press one of the DSP program gr oup[...]

39 English AD V ANCED OPERA TION ■ 1B MAIN (main speaker mode) Choices: LARGE , SMALL LARGE Select this if you hav e large main speakers. The unit directs the entire range of the main left and right channel signals to the main left and right speakers. SMALL Select this if you hav e small main speakers. The unit directs the lo w-frequency signals [...]

40 SOUND 2 SP DIST ANCE (speaker distance) Use this feature to adjust the delay applied to center channel sounds. This feature works when there is sound output from the center speakers with a source such as Dolby Digital or DTS. Ideally , the center speaker should be the same distance from the main listening position as the left and right main spea[...]

41 English AD V ANCED OPERA TION SOUND 5 CENTER GEQ (center graphic equalizer) Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right main speakers. Y ou can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies. Control range (dB): – 6 to +6 Initial se[...]

42 OPTION 1 DISPLA Y SET ■ DIMMER Use this to adjust the brightness of the front panel display . Control range: – 4 to 0 OPTION 2 MEM. GUARD (memor y guard) Use this feature to pre vent accidental changes to settings on the unit. Choices: ON, OFF Select ON to protect the follo wing features: • All set menu items • Main, center , rear speake[...]

43 English AD V ANCED OPERA TION REMOTE CONTROL FEA TURES In addition to controlling this unit, the remote control can operate other A/V components made by Y AMAHA and other manufacturers. T o control other components, you must set up the remote control with the manufacturer codes. Control area ■ Controlling this unit The shaded areas below can b[...]

44 Setting the manufacturer code Y ou can control other components with the remote control by setting the appropriate manufacturer code. The follo wing table shows factory-set component controls (Library: component category) and the manuf acturer code for each. 1 Press and hold CODE SET . With CODE SET depressed, press an input selector button to s[...]

45 English AD V ANCED OPERA TION Controlling other components Y ou can operate other components if you hav e set the manufacturer code for your component in the remote control. Note, ho wever , that some buttons may not operate the component correctly . Once you select an input source, the remote control switches to the mode for operating the compo[...]

46 Using the test tone Use the test tone to set speaker le vels so that the volume from each speaker is identical when heard from your listening position. 1 Press AMP . 2 Press TEST . The unit will output a test tone. 3 Press u / d repeatedly to select a speaker to adjust. Each time you press d , the unit will cycle through the speakers in the foll[...]

47 English ADDITIONAL INFORMA TION SOUND FIELD PROGRAM PARAMETER EDITING Changing parameter settings The initial sound field program settings will pro vide you with an excellent listening e xperience as they are. It is not necessary to alter these settings, but you can create an original listening en vironment by doing so. Note • The editable par[...]

48 Digital sound field parameter descriptions Y ou can adjust the v alues of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in e very program. ■ DSP LEVEL Function: This parameter adjusts the le vel of all the DSP ef fect sounds within a nar[...]

49 English ADDITIONAL INFORMA TION TROUBLESHOOTING Refer to the chart below when this unit does not function pr operly . If the problem you are experiencing is not listed below or if the instruction belo w does not help, set this unit to standby mode, disconnect the power cord, and contact the nearest authorized Y AMAHA dealer or service center . ?[...]

50 Prob lem No sound from the center speaker . No sound from the rear speakers. No sound from the subwoofer . P oor bass reproduction. A “humming” sound can be heard. The v olume level cannot be increased, or the sound is distorted. The sound effect cannot be recorded. The sound field parameters and some other settings on the unit cannot be cha[...]

51 English ADDITIONAL INFORMA TION ■ T uner FM stereo reception is noisy . There is distortion, and clear reception cannot be obtained even with a good FM antenna. The desired station cannot be tuned in with the automatic tuning method. Previously preset stations can no longer be tuned in. The desired station cannot be tuned in with the automatic[...]

52 GLOSSAR Y ■ Dolby Surr ound Dolby Surround uses a 4 channel analog recording system to reproduce realistic and dynamic sound effects: 2 main left and right channels (stereo), a center channel for dialog (monaural), and a rear channel for special sound effects (monaural). The rear channel reproduces sound within a narrow frequenc y range. Dolby[...]

53 English ADDITIONAL INFORMA TION ■ PCM (Linear PCM) Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and D VD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of tim[...]

54 SPECIFICA TIONS FM SECTION • T uning Range [U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz [Other models] .............................................. 87.50 to 108.00 MHz • 50 dB Quieting Sensiti vity (IHF , 100% mod.) Mono/Stereo ........................ 2.0 µ V (17.3 dBf) /25 µ V (39.2 dBf) • Selecti vity (4[...]

LIST OF MANUF A CTURER’S CODES TV Yamaha 299 292 Admiral 292 293 Aiwa 294 276 283 284 Akai 295 296 Alba 296 AOC 297 Bell&Howell 292 Bestar 298 Blaupunkt 229 222 Blue sky 298 Brandt 223 Brocsonic 297 Bush 296 Clatronic 298 Craig 224 Croslex 225 Curtis Mathis 297 226 Daewoo 297 298 224 227 228 Daytron 239 Dual 298 Emerson 297 224 239 232 Fergus[...]

Scott 399 335 336 348 359 352 354 358 Seleco 322 Sharp 395 362 382 Siemens 393 Signature 2000 395 397 Sony 368 379 372 373 374 375 Sylvania 397 325 326 328 Symphonic 397 Tandberg 334 Tashiro 396 Tatung 392 394 Teac 392 394 397 Technics 325 328 Telefunken 376 377 Thorn 393 396 Toshiba 335 369 389 Universum 396 327 376 W.WHouse 396 Wards 395 396 336 [...]