AEG F 55002 VI manual

FAVORIT 55002 VI DISHWASHER USER MANUAL[...]

CONTENTS 4 SAFETY INFORMATION 6 PRODUCT DE SCRIPTIO N 7 CONTR OL PANEL 8P R O G R A M M E S 9O P T I O N S 10 BEFORE FIRST USE 13 DAILY USE 16 CARE AND CLEANING 17 TROUBLE SHOOTING 19 TE CHNICAL INFOR MATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the enviro[...]

FOR PERFECT RESULTS Thank you for choosing this AEG product. We hav e created it to give you impeccable performance for many years , wi th innovative technologies tha t help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading t o get the very best from it. ACCESSORIES AND CONSUMABLES In the A[...]

SAFETY INFORMATION Before the installatio n and use of th e appliance, carefully read the supplied instructions. The manufacturer is not re- sponsible if an incorrect installation and use causes injuries and damages. Al- ways keep the instructions with the ap- pliance for future ref erence. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of suf[...]

ble. Contact Service or an electrician to change a damaged mains cable. • Connect the mains plug to the mains socket only at the end of the in stalla- tion. Make sure that there is access to the mains plug after the installa- tion. • Do not pull the mains cable to dis- connect the appliance. A lways pull the mains plug. • Only for UK and Irel[...]

PRODUCT DESCRIPTION 1 2 3 4 5 8 10 6 7 12 9 11 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket LIGHT BEAM • When a program me operates, a red light beam shows on the floor below the appl[...]

CONTROL PANEL 1 3 4 6 5 2 AB C D E 1 On/off button 2 Display 3 Delay button 4 Programme buttons 5 Indicators 6 Function buttons Indicators Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme op- erates. Multit ab indic ator. ENGLISH 7[...]

PROGRAMMES Programme 1) Type of so il Type of load Programme phases Energy (kWh) Water (l) 2) All Crockery, cutlery, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry 0.9 - 1.7 8 - 15 3) Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry 1.5 - 1.6 13 - 14 4) Fres h soil Crockery and cutlery Wash 60 °C Rinse 0.9 9 5) No[...]

OPTIONS MULTITAB FUNCTION Activate this function only when you use the combi detergent tablets. This function deactivates the flow of rinse a id and salt. The related indicators are off. The programme duration can increase. Activating the multitab function Activate or deactivate the multi- tab function before th e start of a programme. You cannot a[...]

BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees w ith the water hardness in your area. If not, adjust the water softener. Contact your lo- cal water authority t o know the wa- ter hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the w ater tap . 5. Processing residues can stay[...]

Manual adjustment Turn the water hardness dial to t he po- sition 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold function buttons ( B ) and ( C ) at the same time until the in- dicators of funct[...]

FILLING THE RINSE AID DISPENSER M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwas h- ers. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. 1. Press the release button ( D ) to open the lid ( C ). 2. Fill the rinse aid dispenser ( A ), [...]

DAILY USE 1. Open the w ater tap . 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the deter[...]

USING THE DETERGENT 20 30 M A X 1 2 3 4 + - A B C CAUTION! Use only deterge nts for dish- washers. 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart- ment ( A ) . 3. If the programme has a prewash phase, put a small quantity of de- tergent on the inner pa rt of the ap- pliance door. 4. If you use detergent[...]

2. Press the delay button again and again until the display shows the de- lay time you want to set (from 1 to 24 hours). • The delay time flashes in the dis- play. • The delay indicator is on. 3. Close the appliance door. The countdown starts. • If you open the door, the display shows the countdown of the de- lay start that decreases with ste[...]

CARE AND CLEANING WARNING! Before maintenance, deactivate the ap- pliance and disconnect th e mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing re- sults . Make a check regularly and, if necessary, clean them. CLEANING THE FILTERS A B C C A1 A2 1. Turn the filter ( A ) counter- clockwise and remove it. 2. T[...]

TROUBLESHOOTING The appliance does not start or it stops during operation. First try to find a solution to the prob- lem (refer to the table). If not, contact Service. With some prob lems, the dis play shows an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the water. • - The anti-flood device is on. [...]

THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possible solution The dishes are not clean . The filters are clogged. Clean the filters. The filters are not correctly assembled and installed. Make sure that the filters are correctly assembled and in- stalled. The spray ar ms are clog- ged. Remove remaining soil wi[...]

Problem Possible cause Possible solution The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. Dry water drop stains on glasses and dishes. The released quantity o f rinse aid was not sufficient . Increase the released quanti- ty of rinse ai d. The quality of [...]

Water supply 1) Cold water or hot water 2) max. 60 °C Capacity Place settings 12 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. 20[...]

ENGLISH 21[...]

22[...]

ENGLISH 23[...]

www.aeg.com/shop 117929340-A- 192011[...]