Agilent Technologies E2050-90003 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Agilent Technologies E2050-90003. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Agilent Technologies E2050-90003 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Agilent Technologies E2050-90003 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Agilent Technologies E2050-90003, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Agilent Technologies E2050-90003 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Agilent Technologies E2050-90003
- nombre de fabricante y año de fabricación del dispositivo Agilent Technologies E2050-90003
- condiciones de uso, configuración y mantenimiento del dispositivo Agilent Technologies E2050-90003
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Agilent Technologies E2050-90003 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Agilent Technologies E2050-90003 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Agilent Technologies en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Agilent Technologies E2050-90003, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Agilent Technologies E2050-90003, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Agilent Technologies E2050-90003. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Agilent E2 050 LAN/GPIB Gateway Inst all ation and Configurat ion Guide Manu al Par t Numb er: E2 050-90 003 Printed in U. S.A. E0701[...]

  • Página 2

    [...]

  • Página 3

    Content s 3 Cont ents E2050 LAN/GPIB G ateway User’s Guide Front Matter .................. .................... ................... ................... ................... 5 Warranty Information ................. ................... ............. ................... 5 Contactin g Agilent ................ ................... ............. ........[...]

  • Página 4

    Content s 4 4. Administration ........................ ................... ................... .................... .. 6 3 Using the Telnet Util ity............ .................... ................... ............... 6 5 Accessing the Telnet Uti lity ................. ................... ............... 65 Exiting the Telnet U tility .............[...]

  • Página 5

    5 Notice The info rmation co ntained in thi s document i s subject to change without notice. Agilent T echn ologies sh all not be liable f or any error s contained i n this document . Agilent T ec hnologie s makes no warranties of any kind wi th regard to th is docu ment, whethe r express or impli ed. Agilent T echnologies specifi cally dis claims [...]

  • Página 6

    6 T radema rk Information Microsoft ®, Window s ® 95, Wi ndows ® 9 8, Windows ® Me, Windows ® 2000, and Windows NT® are U.S. reg istered tradem arks of Microsoft Corporat ion. All oth er brand an d product na mes are tr ademarks or regist ered tra demarks of their re spective companies. This soft ware and d ocumentation ar e based i n part on[...]

  • Página 7

    7 Safety Considerations Product and Do cument ation Labe ls A W ARNING de notes a hazard tha t can cause injury or death. A CAUTION denotes a hazard that can damag e equipme nt or cause data loss. Do not proceed beyond a WARNING or CAUT ION notice until yo u understand the hazardo us conditi ons and have taken approp riate steps. Grounding The powe[...]

  • Página 8

    8 If your device doe s caus e interfere nce to radi o and tel evision r eceptio n, you are enc ouraged to tr y to correc t the inter ference by one or m ore of the following measures : n Relocate the radio or TV antenna . n Move the device a way from the radio or televisi on. n Plug the device into a different el ectrical outl et, so tha t the devi[...]

  • Página 9

    9 Manufac turer ’ s Name: Agil ent T echnologi es, Incorp orated Manufac turer ’ s Address: 815 - 14th S t. SW Lovelan d, Colora do 80537 USA Declare s, that the prod uct Product Name: LAN/GPIB Gateway Model Num ber: E2050B Product Options : This de claration covers a ll opt ions of th e above p roduct(s). Conforms w ith the following E uropean[...]

  • Página 10

    10[...]

  • Página 11

    11 1 Introduction[...]

  • Página 12

    12 Chapter 1 Int roduc tion This A gilent E2050 LAN/GPIB Gate way Installa tion and Co nfiguration Guide gives g uideline s to install an d configu re the E2050 LAN/GPIB Gateway (Gateway) for use wit h supported, network-equi pped computer systems. Y ou can also use this guid e to administe r the Gateway on your netwo rk and to troubl eshoot in sta[...]

  • Página 13

    Chapter 1 13 Introductio n How to Use This Guid e How to Use This Guide The info rmation in this guide assum es you are a Ne twork Admin istrator wh o install s, config ures, and ma intains a local a rea networ k (LAN ), includi ng network-r elated hard ware like the E 2050 LAN/GP IB Gatewa y . If you use a Series 700 HP-UX works tation with the Ga[...]

  • Página 14

    14 Chapter 1 Introductio n How to Use This Guid e Related Software Document ation Suggeste d softwar e manuals y ou can use fo r E2050 LAN/GPIB G ateway operatio n with the liste d I/O applicatio n software prod ucts follow . The E2050 Gateway supports al l I/O app lication op erations by these s oftware prod ucts except fo r parallel po lling, S I[...]

  • Página 15

    Chapter 1 15 Introductio n E2050 Har dware Desc ription E2050 Hardware De scription In additio n to this guide, the E20 50 produ ct package con sists of: n E2050 LAN /GPIB Gate way Front P anel n E2050 LAN /GPIB Gate way Rear Pan el n AC/DC Ad apter and S tandard AC Power Cord n Rack Mount K it (Optional) E2050 LAN/GPIB Gateway Front Panel As show [...]

  • Página 16

    16 Chapter 1 Introductio n E2050 Har dware D escription E2050 LAN/ GPIB Gateway Rear Panel This figu re shows the back panel feat ures of t he Gateway . No te that the RS-232 i nterface is NO T suppor ted for I/O a pplication use.. E2050 LAN/G PIB Gatewa y Rear Panel GPIB Connector Config Preset butto n for resettin g the Gate way to its factory- s[...]

  • Página 17

    Chapter 1 17 Introductio n E2050 Har dware Desc ription AC/DC Adapter and AC Power Cord As show n in the follo wing figur e, the powe r module ( AC/DC Adapte r) (Agile nt part number 0950-25 46) provid es 5 Vdc pow er to the Gateway . T he 4-foot, DC cable attache d to the pow er module conn ects to the pow er input on the bac k panel of the Gatewa[...]

  • Página 18

    18 Chapter 1 Introductio n E2050 So ftware/F irmware Arch itecture E2050 Software/Firmware Architect ure This secti on describes E2 050 softwa re/firmware archit ecture, includi ng: n I/O Appl ication Soft ware Suppor ted n T ypic al LAN Connec tions n Software/F irmware Over view n Using Appli cations Software I/O Appl ication Software Supported T[...]

  • Página 19

    Chapter 1 19 Introductio n E2050 S oftware/Firmw are Architec ture T ypical LAN C onnections The E20 50 LAN/GPIB Gateway c ombines hardware a nd firmw are in a s ingle box that p rovides a netw ork gateway between net work-equipped computer system s and GPIB based in struments. Th e Gateway enables us ers of I/O applica tions to o btain measurem en[...]

  • Página 20

    20 Chapter 1 Introductio n E2050 So ftware/F irmware Arch itecture The Gateway connects the local area network (L AN) from the computer system to the GPIB bus. Network -equipped c omputer syste ms that are support ed for use wi th the Gat eway include S eries 700 w orkstations and 32-bit PC s. Follow ing the clie nt/server model of com puting, the [...]

  • Página 21

    Chapter 1 21 Introductio n E2050 S oftware/Firmw are Architec ture Software/Fi rmware Architectur e Overview Agilent SICL contains th e LAN client software needed to a ccess the LAN/GPIB G ateway . Thus, SICL is also prov ided with the VISA, VE E, and HP BASIC /UX 700 I/O applicatio n softwar e products. T o use any of th ese software products with[...]

  • Página 22

    22 Chapter 1 Introductio n E2050 So ftware/F irmware Arch itecture Using Appli cation Software This sec tion summar izes how the s oftware on a client comp uter syste m works with the E2050 LAN /GPIB Gatew ay to com plete I/O app lication operatio ns on attached G PIB instr uments. For mo re informa tion on how to use your s oftware with the Gatewa[...]

  • Página 23

    23 2 Inst allation[...]

  • Página 24

    24 Chapter 2 Inst allation This cha pter shows how to install the E2050 LAN/GPIB G ateway on the LAN and th e GPIB bus for use w ith network- equipped computer s ystems, includi ng: n Hardware Requirem ents n Software R equireme nts n Hardware Installation[...]

  • Página 25

    Chapter 2 25 Installatio n Hardware Requirement s Hardware Requirement s T o in stall the Gatewa y , you must have the fo llowing h ardware: n One or more of th ese network -equipped computer systems to act as the L AN clien t system (s): q HP 9000 Ser ies 700 wor kstation q 32-bit per sonal com puter (PC) n A local area net work (LAN) to which the[...]

  • Página 26

    26 Chapter 2 Installation Software Requirement s Software Requiremen t s Each client com puter sys tem that wil l access the Gatewa y must be running one of the f ollowing operatin g systems. n HP-UX V ersion 9 or V er sion 10 .01 or later (for Serie s 700 workstations) n Micros oft Windows 9 5, Windows 98 , Windows 20 00, Windo ws Me, or Windows N[...]

  • Página 27

    Chapter 2 27 Installatio n Installing the Hardware Inst alling the Hardware This sec tion show s how to insta ll the LAN/GPI B Gateway ha rdware b y connecti ng it to th e LAN, GPIB bus, and p ower modu le. Step 1: Record L AN Hardware Ad dress First, find t he hardwar e address of the LA N interface in t he E2050 LAN/GPIB G ateway . Turn the Gatew[...]

  • Página 28

    28 Chapter 2 Installation Installing the Hardware Step 3 : Connect the Gateway to the Network n Ethe rtwi st C onne ctio n. For Ethertwi st, conne ct the LAN cable to t he RJ-45 conn ector on the back panel of th e Gateway . CAUTION Do not conn ect to both the RJ-45 and th e BNC connec tors on the Gateway . On ly one c onnection to the LAN int erfa[...]

  • Página 29

    Chapter 2 29 Installatio n Installing the Hardware n ThinLAN Connectio ns. For Thi nLAN, connect the LAN cable to the BNC co nnector on t he back pane l of the G ateway using a BNC “T” connect or . M ake sure th e ThinLAN s egment is pr operly te rminated . If the Gate way is the e nd node on the L AN, a 50- ohm BNC termina tor must be attached[...]

  • Página 30

    30 Chapter 2 Installation Installing the Hardware Step 4: Conne ct GPIB Cable and Power Cords n Connect th e GPIB cable from the GPIB i nstrument(s) to th e GPIB connecto r on the b ack panel of the Gateway . n Connect th e DC power cord attached to the powe r module ( AC/DC Adapter) t o the po wer input on t he back panel of the Gatewa y , as show[...]

  • Página 31

    Chapter 2 31 Installatio n Installing the Hardware Step 5: Obse rve the Po wer-On Sequenc e n The Gatewa y now g oes through its power-on, h ardware se lf-test. V erify that the h ardware is working pr operly by l ooking at the LEDs on the fro nt panel of the Gateway . n The green Power LED should now be illum inated and the red Fault LED shou ld b[...]

  • Página 32

    32 Chapter 2 Installation Installing the Hardware Notes:[...]

  • Página 33

    33 3 Configuration[...]

  • Página 34

    34 Chapter 3 Configuratio n This cha pter gives guidelines to config ure the E205 0 LAN/GP IB Gateway on your ne twork. Y ou can use t his chap ter if you a re configur ing the Gat eway for the fi rst time on your networ k or if yo u need to c hange the Gat eway’s configur ation. This ch apter incl udes: n Settin g Configur ation V alues n Using [...]

  • Página 35

    Chapter 3 35 Con figur ation Setting Configuration V alues Setting Configu ration V alues This s ection giv es guide lines to se t E2050 co nfigurat ion valu es, incl uding: n S te ps to Set Confi guration V alues n Configu ration V alu es Descripti ons n Default Conf iguration Setti ngs n How Configurat ion V alue s are Used St ep s to Set Configu[...]

  • Página 36

    36 Chapter 3 Config uration Setting Configuration V alues The fol lowing table des cribes the c onfigurat ion values for the E2 050 and the applica ble defaul t (factory -set) va lues. The E 2050 LAN/G PIB Ga teway is shipped from the fa ctory w ith defaul t settings for the con figuration v alues listed i n the table. Y ou can use t he methods des[...]

  • Página 37

    Chapter 3 37 Con figur ation Setting Configuration V alues Hardware Address (MAC) (cont ’d) N/A The hardware add ress val ue cannot be set or changed w ith T elnet co nfiguratio n of the LAN /GPIB Ga teway . How ever , the hardwa re address value mu st be spec ified and set when using the BOO TP or the BO OTP with TF TP configurati on method . Ho[...]

  • Página 38

    38 Chapter 3 Config uration Setting Configuration V alues IP Address 192.0.0.192 This v alue is the I nternet Proto col (IP) add ress of the LAN/G PIB Gateway . T he IP addres s is a re quired va lue and is use d for all I P and TCP/I P comm unications with the LAN/GPIB Gate way . The IP ad dress is represente d in dotte d decima l nota tion (for e[...]

  • Página 39

    Chapter 3 39 Con figur ation Setting Configuration V alues LAN T imeout 0 sec This v alue set s the L AN conne ct timeo ut in sec onds. The Gateway may use th e TCP ke epaliv e timer of th e TCP/IP prot ocol sta ck to de term ine if a clie nt is st ill r eacha ble. B y speci fying thi s configu ration va lue, the G ateway turn s on the keep alive t[...]

  • Página 40

    40 Chapter 3 Config uration Setting Configuration V alues Syslog Serv er Address (cont’d) 0.0.0.0 Ty p i c a l l y, syslogd obt ains its rou ting inform ation from the / etc/syslog.conf con figurat ion file, which you can edit to speci fy the log fi le to wh ich you want syslog messages from the LAN/GPIB G ateway routed. See syslogd(1M) for more [...]

  • Página 41

    Chapter 3 41 Con figur ation Setting Configuration V alues How Configuration V alues are Used The E205 0 LAN/GPIB Gateway uses the default c onfiguratio n values an d/or the confi guration values that you chan ged or set d epending o n certain situatio ns, such as when the p ower is cy cled on t he Gateway o r when the Config Preset button on the b[...]

  • Página 42

    42 Chapter 3 Config uration Setting Configuration V alues When t he Config Preset Button is Pressed The reces sed Config Preset button on the ba ck panel of the G ateway is u sed to rese t the LAN/ GPIB Gate way to i ts default c onfiguratio n values (preset at the factor y). The Config Preset button ha s two mode s of oper ation. n If you pr ess t[...]

  • Página 43

    Chapter 3 43 Con figur ation Configuration Me thods Configuration Metho ds This sec tion descr ibes confi guration me thods you can use to s et the configur ation va lues for the E2050 LA N/GPIB Gat eway , includ ing: n Con figur ation Meth ods Ove rview n Using T e lnet Con figuration Method (Win dows) n Using T e lnet Conf iguration Method (HP- U[...]

  • Página 44

    44 Chapter 3 Config uration Configuration Met hods BOOTP BOOTP is a bootstrap protocol tha t allows critic al confi guration va lues su ch as the IP address and s ubnet mas k to be set e asily . With the BOOTP configur ation met hod, you set the value s for the Ga teway in t he /etc/bootptab file. T his file i s then used by the boo tpd daemon runn[...]

  • Página 45

    Chapter 3 45 Con figur ation Configuration Me thods Using T elnet Conf iguration Method ( Windows) T o confi gure the LAN /GPIB Gate way on yo ur network u sing the T e lnet configur ation met hod from a W indows 95/98/2 000/Me/NT client syst em: 1 Power-on t he Gateway by pluggin g the AC po wer cord from the power mod ule into a power outlet (wal[...]

  • Página 46

    46 Chapter 3 Config uration Configuration Met hods When you are con nected to the G ateway , you will see gen eral informa tion about the T elnet u tility comm ands, as well as a listin g of the curren t configu ration setti ngs for this G ateway . For exam ple, if you have not chang ed any of the config uration settings previous ly , you will see [...]

  • Página 47

    Chapter 3 47 Con figur ation Configuration Me thods 10 At the T elnet prom pt ( > ), enter the configu ration valu es you wa nt to change or set. (Y ou only n eed to s pecify th e non-d efault valu es that you want.) The following i nformation wi ll help you set the val ues cor rectly . The foll owing table lis ts the config uration values you c[...]

  • Página 48

    48 Chapter 3 Config uration Configuration Met hods For ea ch configur ation va lue to change or set, u se the syntax: T elnet_command : value Enter . For exam ple, to set th e IP addr ess valu e of 156.140.222.201 for the Gatewa y , enter: ip: 156.140.222.201 Enter If you make a m istake, re-en ter the c orrect co nfiguration value yo u want. T o d[...]

  • Página 49

    Chapter 3 49 Con figur ation Configuration Me thods Y ou should get a response fro m the ping command that is simi lar to the following , where each line afte r the PING line is an example of a packet successful ly reaching the Gateway from the clien t system. If the ping response i s similar to the following, th e Gateway has been conf igured suc [...]

  • Página 50

    50 Chapter 3 Config uration Configuration Met hods Using T elnet Conf iguration Method (H P-UX) T o confi gure the LAN /GPIB Gate way on you r network u sing T elne t from an HP-UX c lient sys tem, do the f ollowing: 1 Power-on t he Gateway by pluggin g the AC po wer cord from the power mod ule into a power outlet (wall ou tlet). 2 After the G atew[...]

  • Página 51

    Chapter 3 51 Con figur ation Configuration Me thods For exam ple, if you have not chang ed any of the config uration set tings previo usly , you will see the default co nfiguration s ettings for the G ateway , as follows. In this disp lay , the hardware-addr: v alue is an exa mple. Y our hardware-addr: value wi ll be co rrect for your Gate way . 6 [...]

  • Página 52

    52 Chapter 3 Config uration Configuration Met hods The foll owing table lis ts the config uration values you can set using T eln et. The infor mation fo llowing th e table expl ains the sy ntax you should us e and provides r eminders to help you to change or set the configur ation va lues co rrectly . For ea ch configur ation va lue to cha nge or s[...]

  • Página 53

    Chapter 3 53 Con figur ation Configuration Me thods If you want to exit without sav ing any of the conf iguratio n values y ou have c hanged o r set, e nter eithe r exit Return or quit Return . Y ou can then r e-enter th e T elnet configur ation utilit y starting with S te p 5. Any time dur ing t he T elne t sessi on, yo u can en ter config Return [...]

  • Página 54

    54 Chapter 3 Config uration Configuration Met hods PING E2050.agilent.com: 64 byte packets 64 bytes from 128.10.0.3: icmp_seq=0. time=3. ms 64 bytes from 128.10.0.3: icmp_seq=1. time=3. ms 64 bytes from 128.10.0.3: icmp_seq=2. time=2. ms . . . A resp onse simil ar to the f ollowing ind icates t he client was unable to contact the G ateway . There m[...]

  • Página 55

    Chapter 3 55 Con figur ation Configuration Me thods Using BOOTP Configu ration Method (HP-UX) T o confi gure a LAN/G PIB Gatewa y on your n etwork usin g BOOTP from an HP-UX cl ient syst em: 1 Make sure tha t the Gateway is powered-off. The AC po wer cord from the po wer module mus t be disconn ected from the power outlet (wall ou tlet). 2 Determin[...]

  • Página 56

    56 Chapter 3 Config uration Configuration Met hods This exa mple BO OTP entry c onfigur es a host name ( hn ), a hardwar e address ( ha ), and an IP addres s ( ip ) for the LAN/ GPIB Gateway . All other config uration val ues are “set ” to (wil l default to) the factor y defaults . For each entry you m ake to the file, inclu de a colo n (“ : [...]

  • Página 57

    Chapter 3 57 Con figur ation Configuration Me thods 4 T est that the Gatewa y has r eceived the BOOTP response a nd has configur ed itself by using the ping co mmand. This co mmand allo ws you to tes t genera l network c onnectivity between your client comput er system and the LAN/GPI B Gateway . At th e client syst em, type: ping hos tname (or) IP[...]

  • Página 58

    58 Chapter 3 Config uration Configuration Met hods Using BOO TP with TFTP Configuration Method (HP-UX) T o confi gure a LAN/G PIB Gateway on your n etwork usin g BOOTP wi th TFTP from an HP-UX client sy stem: 1 Make sure that the Gatewa y is powered O FF . The AC power cord from the po wer module mus t be disconn ected from the power outlet (wall o[...]

  • Página 59

    Chapter 3 59 Con figur ation Configuration Me thods This e xample BO OTP entry c onfigur es a host name ( hn ), a hardwar e address ( ha ), an IP ad dress ( ip ), an d the path to the TFTP c onfigura tion file ( T144 ). In this example, the path to the TFTP c onfigura tion file is relative , with the assump tion that th e default TFTP mode is b ein[...]

  • Página 60

    60 Chapter 3 Config uration Configuration Met hods 5 Create the appropri ate directory structure and TFTP configuration file for each LAN/GP IB Gateway , as noted i n the T144 configur ation valu e you set in the /etc/bootptab file. Be s ure you set permission s on these directories and on the TFTP configurat ion file to allow acc ess by the bootpd[...]

  • Página 61

    Chapter 3 61 Con figur ation Configuration Me thods An examp le TFTP fi le follows. Consult y our system do cumentation for any other steps required to complete the TFTP configuration fil e. # The E2050 gw1 Configuration File hostname: E2050 # Timeouts lan-timeout: 7200 io-timeout: 240 # IP allow list allow: 156.140.34.2 15.2.* # GPIB configuration[...]

  • Página 62

    62 Chapter 3 Config uration Configuration Met hods At the client syste m, type: ping ho stname (or) IP_ad dress Return For exam ple, usin g a Ga teway’s hostnam e: ping E2050.agilent.com Return Or , us ing a Gatewa y’s IP addres s: ping 156.140.4.249 Return Y ou should get a res ponse from the ping comm and that is similar to the f ollowing, wh[...]

  • Página 63

    63 4 Administration[...]

  • Página 64

    64 Chapter 4 Administration This cha pter gives guidelin es to admini ster the E2 050 LAN/G PIB Gateway on your network, us ing the T e lnet util ity provided with the LA N/GPIB Gateway . The T elnet utility pr ovides a c ommand li ne interfac e for accompl ishing adm inistrat ion tasks, in cluding T elnet c onfiguration of the Gateway , querying t[...]

  • Página 65

    Chapter 4 65 Admi nistr ati on Using the T elnet Utility Using the T elnet U tility This sec tion explai ns how to acc ess and ex it the T e lnet utili ty . It also summ arizes va rious T el net comm ands you can use t o adminis ter the E2050 LA N/GPIB Gate way . The se ction co ntents are: n Access ing the T elnet Utilit y n Exi ting th e T eln et[...]

  • Página 66

    66 Chapter 4 Adminis tration Using the T elnet Utility 3 If you do not know the IP address or h ostname of the Gateway: n After the Gateway has been p owered-on, press the Config Preset button on the b ack panel of the LAN/GPIB Gate way . This forces th e Gateway to temp orarily use th e 192.0.0.192 default IP address wi thout modi fying any o ther[...]

  • Página 67

    Chapter 4 67 Admi nistr ati on Using the T elnet Utility 5 If you ar e using a W indows 95/98/M e/2000/NT cl ient syste m, you may als o need to tu rn on Loc al Ec ho in t he T erminal Pr eferences dialog b ox so that the T e lnet util ity will di splay your typed i nput. T o do thi s: n From the m enu at the to p of the T e lnet windo w , sel ect [...]

  • Página 68

    68 Chapter 4 Adminis tration Using the T elnet Utility Exiting the T elnet Utili ty T o exit the T elne t utility , us e these T elnet commands . n If you want to exit without sav ing any change s (if any) yo u have made to the configur ation va lues, at t he T elnet prompt ( > ) type bye (or) exit (or) quit . n If you want to save the c hanges [...]

  • Página 69

    Chapter 4 69 Admi nistr ati on Using the T elnet Utility Comma nd Descriptio n allow: IP_address(es) Set the IP allow list configu ration value for the Gateway . bootp: ON/OFF T urn ON or O FF the use of BOOTP or BO OTP with T FTP configura tion o f the Gatew ay . bye Quit t he T elnet uti lity with out s aving confi gura tion chan ges. config Dis [...]

  • Página 70

    70 Chapter 4 Adminis tration Quer ying the Gatewa y Querying the Gateway This sec tion gives guidelines to query th e E2050 LA N/GPIB gatew ay , includi ng: n Queryi ng the Curr ent Configura tion n Queryi ng the Fir mware V ersion n Queryi ng the Conf iguratio n Method n Queryi ng Gatewa y/Client Connectio ns Querying the Current Configuration As [...]

  • Página 71

    Chapter 4 71 Admi nistr ati on Queryin g the Gatew ay Querying the C onfiguration Metho d If you do n ot know the configurat ion method curren tly used for th e Gateway , you can deter mine the method via the bootp: ON/OFF T elnet co nfiguration value. T o do this: 1 At the T e lnet prom pt (>), type config . Th is display s the curren t configu[...]

  • Página 72

    72 Chapter 4 Adminis tration Quer ying the Gatewa y The foll owing is an example status scr een of clien ts connecte d to an E20 50 LAN/GPIB G ateway . The mean ing of the various fi elds list ed on the T elnet status sc reen are: Server ID Client IP Addr Client ID Sess Operation Lock Device/Intf 0x2008f624 156.140.4.247 4139 117 5 66 WRITE DEV DEV[...]

  • Página 73

    Chapter 4 73 Admi nistr ati on Queryin g the Gatew ay All the s essions for a particul ar connect ion are l isted tog ether and only the first ses sion has th e Server ID , Client IP Addr , and Client ID specifi ed. For a g iven clien t, one ses sion at mos t will ha ve an operat ion pending o r in progr ess at a given time. The Client IP Addr and [...]

  • Página 74

    74 Chapter 4 Adminis tration Quer ying the Gatewa y Operatio n SICL Funct ion GETT1 igpibgett1delay HINT ihint LLO igpibllo LOCA L ilocal LOCK ilock ONINTR ionintr ONSRQ ionsrq OPEN iopen P ASSCTL igpibpassctl READ iread READSTB ireadstb REMOTE iremote RENCTL igpibrenctl SENDCMD igpibsendcmd SETINTR isetintr SETT1 igpibsett1delay TRIGGER itrigger, [...]

  • Página 75

    Chapter 4 75 Admi nistr ati on Configuring the Gateway Configuring th e Gateway This sec tion gives guideli nes to confi gure the E 2050 LAN/GP IB Gatewa y , includi ng: n Settin g Default Config uration Settings n Changing th e Configurati on Method n Usin g the Gat eway’ s syslog File n T ermina ting Clie nt Connecti ons Setting Default Conf ig[...]

  • Página 76

    76 Chapter 4 Adminis tration Configuring the Ga teway T o chang e the conf iguration m ethod used for the Gate way , you can modify the bootp: ON/OFF T elnet c onfiguratio n value or you can pr ess the Config Preset button. Once y ou have chan ged the co nfiguration method, fol low the procedu res in Chapter 3 t o configu re the Gatewa y via th e n[...]

  • Página 77

    Chapter 4 77 Admi nistr ati on Configuring the Gateway T o mo dify the con figuration m ethod by p ressing th e Config Preset button, press the Config Preset button on the back panel of th e LAN/GP IB Gateway at the sam e time as you power -on the Ga teway . This ch anges al l configur ation va lues back to the defaul t values , including s etting [...]

  • Página 78

    78 Chapter 4 Adminis tration Configuring the Ga teway n Becaus e of the limited me mory area on th e Gateway , only about 50 lines of syslog-display messages can be logg ed in t he Gateway . After the li mit has b een reached , any new mes sages can not be logged. F or more i nformation, see “Maintaini ng the syslog File”. n Message s sent to t[...]

  • Página 79

    Chapter 4 79 Admi nistr ati on Configuring the Gateway T ermi nating Cl ient Connec tions If after qu erying the status of the G ateway an d client co nnection s, you determin e that the Ga teway or a cli ent’s I/O operati on is “hung” or there is a deadlock situation between cl ients that ar e connected to the Gat eway , you can reb oot the [...]

  • Página 80

    80 Chapter 4 Adminis tration Configuring the Ga teway Notes:[...]

  • Página 81

    81 5 T roubleshoo ting[...]

  • Página 82

    82 Chapter 5 T roubleshooting This cha pter gives guidelines to troubles hoot problem s that may occur with the E2050 LAN/GPIB G ateway , in cluding: n Gatewa y Failur e Messag es n T roubles hooting Netw ork Confi guration n T roubles hooting G ateway Conf iguration n T roubleshoot ing Clien t Connecti ons NOTE This chap ter refe rences T e lnet u[...]

  • Página 83

    Chapter 5 83 T roubles hooting Gateway Fa ilure Messages Gateway Failure Messag es This section provides fa ilure messages and trou bleshooting explana tions fo r the E2050 LAN/GPIB G ateway , in cluding: n SICL Error Codes an d Messages n syslog File Mess ages SICL Error Codes and Messages The foll owing table lis ts some com mon SICL e rror code [...]

  • Página 84

    84 Chapter 5 T roubles hooting Gateway Fa ilure Messages syslog File Messages The syslog fil e error mess ages ca n be view ed via the T e lnet syslog- display comma nd or by lo oking in the syslog file spe cified v ia the syslo g server addr ess confi guration value. Any inv alid BOO TP values are detec ted when the file /etc/bootptab is read by t[...]

  • Página 85

    Chapter 5 85 T roubles hooting T roubleshooting Network Configuration T roubleshooting Network Configu ration This sec tion pro vides guid elines t o trouble shoot netwo rk configu ration problem s, including: n V erify ing Network Connections n T roubles hooting Netw ork Confi gurations V erifying Network Connections Before attem pting to c ommuni[...]

  • Página 86

    86 Chapter 5 T roubles hooting T roubleshooting Network Configur ation T roubleshooting Network Configu rations If some ne twork confi guration va lues for the E2050 L AN/GPIB G ateway ar e imprope rly confi gured, one or more clie nt systems may not b e able to m ake a connec tion to the Gateway . The p roblem m ay be: n Improp er configur ation v[...]

  • Página 87

    Chapter 5 87 T roubles hooting T roubleshooting Network Configuration BOOTP or BOOTP with TF TP Config uration T o cor rect networ k configurati on values wh en using the BOOTP o r the BOOTP with TFT P con figur ation meth od: 1 Fix the imprope r value in the /etc/bootptab file or t he specifie d TFTP c onfigura tion file . 2 Cycle th e power on th[...]

  • Página 88

    88 Chapter 5 T roubles hooting T roubleshooting Gateway Configuration T roubleshooting Gat eway Configurati on This sec tion gives guidelines to troubles hoot E2050 LA N/GPIB Ga teway configur ation pr oblems, inc luding n V erify ing Gateway Configur ation n Settin g Default Config uration n V erify ing the Co nfiguration Meth od n Changing th e C[...]

  • Página 89

    Chapter 5 89 T roubles hooting T roubleshooting Gateway Configura tion V erifying the Configuration Method If you hav e a problem configuri ng the LAN/ GPIB Gatewa y (such a s configur ing the IP ad dress), f irst verify the method of config uration for the Gateway . After veri fying the c onfiguration method, s ee the appl icable sect ion in thi s[...]

  • Página 90

    90 Chapter 5 T roubles hooting T roubleshooting Gateway Configuration 4 If the Gate way is powered on, confi gured, but y ou do not k now the IP addre ss: n Press t he Config Pre set button on th e back panel of the LAN/GPIB Gate way . This forces the G ateway to tem porarily use the 192.0.0.192 de fault IP ad dress with out modifyin g any other co[...]

  • Página 91

    Chapter 5 91 T roubles hooting T roubleshooting Gateway Configura tion Changing the Co nfiguration Method If you want to change the configur ation meth od used for the Gatewa y , you can take one of three fo llowing act ions. Howe ver , for Windows 9 5/98/Me/ 2000/NT c lient sys tems, yo u must us e the T el net config uration meth od. Neither t he[...]

  • Página 92

    92 Chapter 5 T roubles hooting T roubleshooting Gateway Configuration T roubleshooting T el net Configuration If you have trouble con figuring the LAN/GPIB Gateway usin g T elnet wi th the default IP address o f 192.0.0.192 : 1 V erify that the route c ommand wa s performe d properly . Us e netstat -r to display the network ro uting tables. 2 V er [...]

  • Página 93

    Chapter 5 93 T roubles hooting T roubleshooting Gateway Configura tion 4 V er ify the BO OTP ser ver is on the same loc al subne t as the Gateway . If no t, consult your Ne twork Adminis trator to verify t hat your ne twork confi guration supports usi ng a BOOTP server th at is not on the s ame sub net. 5 When the G ateway is powe red on, ver ify t[...]

  • Página 94

    94 Chapter 5 T roubles hooting T roubleshooting Client Connections T roubleshooting Client Connection s This se ction giv es guidelin es to troubles hoot clien t connections to the E2050 LAN/GPIB G ateway , incl uding: n Client Connec tion Problems n Client Run-time Er rors Client Connection Problems Even if the E2050 L AN/GPIB Gateway has been s u[...]

  • Página 95

    Chapter 5 95 T roubles hooting T roubleshooting Client Connections This indi cates the cli ent was unabl e to contact th e Gateway . The Gateway may be on a different su bnet than th e client (see your Network Adminis trator) or the Gateway may have incorrect netwo rk configur ation va lues. n For an HP-UX cli ent system, type: ping h ostname (or) [...]

  • Página 96

    96 Chapter 5 T roubles hooting T roubleshooting Client Connections n Y ou can also try rpcinfo -t IP_addre ss 395180 Return . This rpcinfo comm and gives th e response : program 395180 version 1 ready and waiting. If this is not working properly , see “Troubleshootin g Network Con figuration” . 3 The T el net comm and can be used to v erify if [...]

  • Página 97

    Chapter 5 97 T roubles hooting T roubleshooting Client Connections iopen fails or I/O o peration f ails: Out of resources The Gat eway was unable to open ano ther sess ion or perf orm the op eration becaus e it is ou t of resou rces. Us e the T elne t status command and look in the syslog file fo r any error message s to determ ine the c urrent Ga [...]

  • Página 98

    98 Chapter 5 T roubles hooting T roubleshooting Client Connections Gat eway ap pears to be hung There are several p ossible causes . For all of the follo wing, use o f client timeout s and/or Gat eway timeo uts (th e I/O tim eout and L AN timeo ut configu ration values) c an be us ed to ensu re that the Gatewa y will not “hang” in definitel y .[...]

  • Página 99

    99 A Specifications[...]

  • Página 100

    100 Specific ations Specifications This a ppendix pro vides spe cification s for the E2050 LAN/G PIB Gateway , includi ng: n Power Req uirements n Enviro nmental n GPIB Cha racteristics[...]

  • Página 101

    Specifications 101 Specif ications Power Requirement s Environment al GPIB Charact eristics The GPIB c onnection conforms to IE EE 488.1 - 1987 specific ations. Per this specifi cation, t he followi ng constra ints exist: E2050 AC/DC Adapter Input V olta ge 5 Vdc 100-240 V ac Input Current ~0.8 A T ypical 9.75 A Frequency Range dc 50/60 Hz Output C[...]

  • Página 102

    102 Specific ations Specifi cations Notes:[...]

  • Página 103

    103 Glossary[...]

  • Página 104

    104 Glos sary Glossary address A stri ng uniquel y identi fying a partic ular in terface or a device on that interfac e which is inte rpreted at the E 2050 LAN/G PIB Gateway to identify the in terface or device. BOOTP requests Broadc ast messag es sent a t power-on fr om the E2 050 LAN/G PIB Gateway to the BO OTP serve r's bootpd dae mon to ga[...]

  • Página 105

    Glossa ry 105 Glossar y gateway Hardware tha t permits a netwo rk connectio n between th e LAN that you r comput er understand s, and the instrument specifi c interface tha t your device understands. instrument A devic e that accep ts commands and perf orms a test or measu rement function. interface A connec tion and communic ation med ia between d[...]

  • Página 106

    106 Glossar y Glossary one inter face on th e controller or gateway , e ach interfa ce must hav e a unique s ymbolic na me. TFTP The T rivia l Fil e T ransf er Pr otoco l, whic h is an exte nsion t o BOOTP . VEE The Agile nt Visual Engin eering Env ironment, wh ich is sof tware use d for I/O appli cation pro gramming. VISA The Agile nt Virtual Inst[...]

  • Página 107

    Index 107 A AC/DC adapte r, 17 admin istration, 6 4 Agilent tel ephone number s, 6 Agilent web si te, 6 allow, 69 applica tion softwa re suppo rted, 18 using, 22 B BNC co nnector , 16 bootp com mand, 69 BOOTP ON/OFF c ommand, 3 6 BOOTP con figurati on configur ation va lues, 55 default v alues, 55 definiti on, 44 method (H P-UX), 55 troubles hootin[...]

  • Página 108

    108 Index G gateway c onfiguration , verifying, 88 gateway fai lure mess ages, 83 gateway/c lient connec tions, 7 1 glossary , 104 GPIB Ad dress, 37 GPIB conne ctor, 16 GPIB Interf ace Name, 37 GPIB Log ical Unit, 37 guide, using , 13 H hardware address , 36 description, 15 failure, 85 installing , 27 requiremen ts, 25 hardware-a ddr comman d, 69 h[...]

  • Página 109

    Index 109 S safety, 7 server/c lient mo del, 20 setting c onfigur ation values , 35 setting defau lt configur ation, 75, 88 SICL LAN error co des, 83 SICL LAN p rotocol, 21 software requireme nts, 26 software/firmw are architecture, 21 specifi cations , 100 status, 69 subne t mask, 3 9 subnet- mask, 69 super- user privi leges, 13 sysl og file descr[...]

  • Página 110

    110 Index T (continued) troubleshoo ting (cont’ d) gateway c onfiguration , 88 har dwar e fail ure, 85 network con figurati ons, 85–86 network c onfigurati ons BOOTP with TFTP, 87 BOOTP, 87 Telnet, 86 setting default con figurati on, 88 T elne t configura tion, 92 verifying config metho d, 89 verifying gateway c onfig, 88 verify ing network con[...]