Averatec D1002 manual

TM All-In-One PC User ’ s Guide[...]

i Regulations Information FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,[...]

ii FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any othe[...]

iii Optical Device Drive Notice C A UTION ✓ This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.?[...]

iv Macrovision Notice This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engi[...]

v WEEE Statement 12. Do not leave the equipment in an unconditioned environment with a storage temperature of 60°C (140°F) or above, which may damage the equipment. 13. To prevent explosion caused by improper battery replacement, use the same or equivalent type of battery recommended by the manufacturer only.[...]

vi[...]

vii[...]

viii T able of Content What is the Averatec All-In-One PC? 1 Turning On and Shutting Off 2 Using the Wireless Keyboard, Mouse and Remote Control 4 Adjusting the Brightness of the Monitor 8 Adjusting the Speaker Volume 9 Connecting Your Multi-Channel Speakers 10 Using the Optical Drive 12 Connect to the Internet 15 Using Your Webcam 16 Using the Wir[...]

1 What is the Averatec All-In-One PC ? The Averatec All-In-One PC is an all inclusive desktop PC that is designed for quick installation and easy use without taking up much desk space. Features Integrated PC and LCD Monitor The Averatec All-In-One PC is equipped with a 22" LCD monitor and fully functional PC. Nothing else is needed. The All-In[...]

2 T urning On and Shutting Off T urning off T urning on Press the power button on the right side of the PC. Case 1 Click <Start> to turn off computer. Click start and select <Shut Down>. Turn off computer screen displays.[...]

3 Case 2 Press the power button on the right side of the PC. After closing all programs,the PC will be turned off. If the system is operating abnormally, you can reboot the PC by holding down the Power button until the PC turns off. Then press the Power button again to boot back up. Case 3 Power saving mode. Saves your session and puts the computer[...]

4 Using the Wireless K eyboard, Mouse and Remote Control Inserting the batteries To use the wireless keyboard, mouse and remote control, you will need to install the batteries. 1. Place the wireless keyboard, mouse and remote control upside down and remove the battery covers from them. 2. Insert the batteries into the wireless devices. Be sure to i[...]

5 T urning on the computer Turn on the computer by pressing the power button on the right side, then check each wireless device works properly with your computer. 4. Set the ON/OFF switch to the ON position on the bottom side of the mouse.[...]

6 Re-setting the ID Channel with Y our Wireless Devices Your wireless devices were connected and sync’d to the computer at the factory setting, so you can use them with your computer without any additional sync’ing. If you need to re-set the ID channel of your system and wireless devices for any reason, follow these instructions: 1. Press the c[...]

7 1. Press the connect button on the right side of the computer with a tip of a pencil or paperclip for 1 to 2 seconds. 2. Press the <Back> and <More> buttons simultaneously for 3 to 5 seconds on the remote control. Remote control[...]

8 Brightness Control button 100% (For brighter display) 90% Using the brightness control button 50%(For darker display) 75% Adjusting the Brightness of the Monitor You can adjust the brightness by clicking the brightness control button on the right side of the LCD panel. There are 4 levels of LCD brightness adjustment available. Each press of the b[...]

9 Adjusting the Speaker V olume Volume button (Up/Down) To adjust the volume level, press the top volume button to increase the volume level and the bottom volume button to decrease the volume level. Mute button To mute the speaker sound, press it once to enable mute and press it again to disable mute. Volume button(Up) Volume button(Down) Speaker [...]

10 Connecting Y our Multi-Channel Speakers Connect the speakers to microphone, line-in and line-out jacks Connect the speakers to SPDIF jack Multi-channel speakers (optional) Multi-channel speakers (optional) or Note ✓ Connecting the speakers will cause a window to appear confirming detection of the device. ✓ When configured for 5.1 audio speak[...]

11 To use multi-channel speakers you should verify that the sound setting is adjusted correctly. To set the multi-channel speakers, follow these steps. 1. Double click Realtek HD Audio Manager icon. A djusting v olume The Averatec All-In-One PC has built-in speakers on the front and back of the system.You can adjust the volume by clicking the volum[...]

Using the Optical Drive The Averatec All-in-One PC is fitted with a slot-type or slim-type optical drive (COMBO or DVD Recorder). Slot-loading CD drive 1. Insert CD/DVD With the system powered on, insert a CD/DVD into the CD/DVD drive.(Slide the CD/DVD into the system with the disc label facing up. If the label side is facing down, the CD will be e[...]

13 T ray-loading CD drive 1. Press the Eject button of the CD/DVD drive. 2. Insert CD/DVD Insert CD/DVD in the CD/DVD drive and place CD/DVD label side front.Press the CD/DVD Drive. 3. Eject CD/DVD Press the Eject button of the CD/DVD drive on the right side of the Averatec All-In-One PC. You can then remove the CD/DVD. 1 2[...]

14 Note ✓ This system is fitted with a slot-loading or tray-loading optical drive. CDs that are not of the standard size cannot be used in this product. ✓ If you can not eject a CD/DVD from the drive, click Start, choose Computer , right-click on the CD/DVD drive that the CD/DVD is in and choose Eject in the popup menu. ✓ Make sure CD/DVD is [...]

15 1. Press the power button and the Windows Vista start screen will appear. Connect a LAN cable to the LAN connector as shown in the figure below. 2. Configure the communication settings for the system based on your communication environment. When connecting to the Internet via an internet service provider, contact the service provider for more in[...]

16 You can take photos and chat with your friends. T ake photos Double click the Webcam program. An amber light on the webcam LED indicates your PC is ready to take photos. V ideo chatting To chat with video, both your system and the system of the person you want to chat with must have a web camera or a CCD camera installed. You also need to downlo[...]

17 2. Right-click on your chat partner and then select Show your webcam, as illustrated below. 3. Now you’re ready to start chatting![...]

18 To use a wireless network in an office environment where APs (Access Points) are installed, see the following instructions. (The example used here explains how to use the basic Windows configuration features to configure the system. You can also use the program that comes with the wireless LAN card to configure the network.) 1. Right-click on th[...]

19 4. When the Successfully connected to xxxxx window appears, confirm the settings and then click Close . 5. Once connection is successfully established, the network icon on the status bar will change its shape. Select the right items for your environment, and click Close. 3. A window will appear displaying Connecting to xxxxx (Where XXXXX is the [...]

20 Insert cards with label side facing toward the back of the PC. MS MS-PRO MS-PRO Duo SD MMC RS-MMC Averatec's All-In-One PC accepts 4 types of multi-media cards into the multi-card reader slot on the right side of the PC. Multi-Media card SD (Secure Digital™), MS-PRO™, MS-PRO™ Duo, MS(Memory Stick™), MMC(MultiMediaCard™), RS-MMC In[...]

21 You can connect a TV Antenna to the PC. Connecting an external antenna cable directly to the system to watch TV 1. Connect Antenna cable to TV tuner. 2. Click Start , and the select Windows Media Center . W atching TV Note ✓ When the Start screen appears, on your first use, select Quick Installation and then click <OK> .[...]

22 3. Click TV + Movies . To set up the TV , follow the instructions on the screens. 4. When the TV Signal screen appears, click Next . Note ✓ If you haven’t already done so, connect to the Internet. 5. When the Confirm Your Region screen appears, choose your region and then click Next .[...]

23 6. When the Automatic TV Signal Setup screen appears, select how you would like to proceed and then click Next . (Choosing Configure my TV signal automatically is recommended here.) 7. If TV signals are configured normally, select Yes and then click Next . (If necessary, you can manually configure TV signals.)[...]

24 8. When the Guide screen appears, follow the online instructions to install the program. (The installation method varies depending on the user environment.) 9. In the TV+Movies menu, move to live TV and click on it. Now you are set to watch TV.[...]

25 System SETUP For System Setup, setup only the items that you need. Note that incorrect settings of Setup items could result in system malfunction. Start System Setup After powering on the system, press <Del> to enter the System Setup screen. BIOS Action K eys Leaves a sub-menu to return to the previous menu OR exits the BIOS setup while sa[...]

26 BIOS Setup Menu   Standard CMOS Setup Menu Sets most standard specifications for the system, such as the time, date, HDD settings, and FDD size and capacity.   [...]

27 Advanced Setup Menu Sets up key items related to the system’s performance, and options about booting.   Advanced Chipset Setup Menu Consists of DRAM Frequency, Configure DRAM Timing by SPD, and Share Memory Size.  [...]

28 Integrated Peripherals Menu Sets up options about the chipset built into the main board. Sets up options about the internal speaker.   Power Management Setup Menu Sets up options for managing system power.  [...]

29 PCI/PnP Setup Menu   PC Health Status Menu[...]

30 Set up P assw or d 1. On the initi al System Setup scr een, pr ess < > to g o to th e Supervisor P assw or d men u an d then pr ess <Enter> . 2. Go to Change Supervisor Password , and then press <Enter> . Frequency/V oltage Control Menu   Supervisor/User Password Menu Sets up a password to prevent any unauthorized user fr[...]

31 3. On the following screen, enter the password and then press <Enter> . 4. If you entered the correct password, the following window will appear. Press <Enter>. The Supervisor Password is at a higher level than the User Password. Then enter the same password again and press <Enter> . This completes setting up a password. Enter [...]

Expanding the Main Memory There may come a time when you want to expand the main memory capacity. When expanding the main memory,make sure that the specifications of any newly added memory and the currently installed memory are the same. The following instructions are provided to those who are familiar with system assembly/disassembly in order to h[...]

33 1. Before proceeding, make sure that the system is turned off, that you are wearing an anti- static wrist strap (available in most computer shops), and that your workspace is dust and smoke-free. 2. Removing the system cover Place the system on an open flat surface and remove the screws and back cover as shown in the figure. Make sure that the L[...]

34 3. Mounting the main memory If you want to continue to use your existing memory, you will not need to remove it. 1) Make sure that the ejector clips on both sides of the socket are in the open position. 2) Align the notches of the DIMM memory with the slot keys of the socket, this allows the memory to be inserted. Gently push the memory into the[...]

35 4. Replacing the system cover Connect the close the back cover and attach the screws. Make sure that the LCD panel does not get damaged. 5. Checking memory capacity Once memory installation is complete, restart the system. If an error message related to the memory capacity appears upon booting, press the Del key to enter the system setup screen.[...]