Barco R9002328 manual

BARCO PROJECTION SYSTEMS BARCO PROJECTION SYSTEMS INSTALLATION MANUAL INSTALLATION MANUAL Date: 200498 Date: 200498 Rev. : 02 Rev. : 02 Art. No. R5975069A Art. No. R5975069A R9002328 R9002327 VISION 708 R9002328 R9002327 VISION 708[...]

Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, April 1998. All rights reserved. Trademarks are the rights of their respective owners. BARCO nv/Projection Systems Noordlaan 5 8520 Kuurne Belgium Printed in Belgium Due to constant research, the information in this manual is subject [...]

TABLE OF CONTENTS TABLE OF CONTENTS i-I TABLE OF CONTENTS i-I TABLE OF CONTENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 WARNINGS . .. . .. . .. . . .................................................................................................... 1 - 1 SAFETY INSTRUCTIONS ...................................................[...]

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-1 SAFETY INSTRUCTIONS 1-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 WARNINGS SAFETY INSTRUCTIONS on safety on installation on servicing on cleaning on re-packing on illumination WARNINGS SAFETY INSTRUCTIONS on safety on installation on servicing on cleaning on re-pa[...]

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-2 1-2 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Notice on Safety This equipment is built in accordance with the requirements of the international safety standards EN60950, UL 1950 and CSA C22.2 No.950, which are the safety standards of informatio[...]

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-3 SAFETY INSTRUCTIONS 1-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product may cause a risk of electrical shock to persons. The exclamation point within a tr[...]

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-4 1-4 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 * All the safety and operating instructions should be read before using this unit. * The safety and operating instructions manual should be retained for future reference. * All warnings on the proje[...]

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-5 SAFETY INSTRUCTIONS 1-5 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 3 . Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. To disconnect the cord, pull it out by the plug. Never pull the cord itself. 4 . [...]

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-6 1-6 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 c. If the product has been exposed to rain or water. d. If the product does not operate normally when the operating instructions are followed. Note : Adjust only those controls that are covered by t[...]

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-7 SAFETY INSTRUCTIONS 1-7 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 When installing the projector and screen, care must be taken to avoid exposure to ambient light directly on the screen. Avoid adverse illumination on the screen from direct sunlight or fluorescent l[...]

2-1 2-1 UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 UNPACKING DIMENSIONS UNPACKING DIMENSIONS[...]

UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS 2-2 UNPACKING AND DIMENSIONS 2-2 UNPACKING AND DIMENSIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Unpacking To open de banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. Save the original shipping ca[...]

2-3 2-3 UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Projector dimensions Projector dimensions[...]

INSTALLATION GUIDELINES INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-1 INSTALLATION GUIDELINES 3-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 INSTALLATION GUIDELINES Environment What about ambient light? Which screen type? What image size? How big should the image be? Where to install the projector? How to install the proj[...]

INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-2 INSTALLATION GUIDELINES 3-2 INSTALLATION GUIDELINES 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Installation guidelines Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the [...]

INSTALLATION GUIDELINES INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-3 INSTALLATION GUIDELINES 3-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 * Which screen type? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applications. Screen[...]

INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-4 INSTALLATION GUIDELINES 3-4 INSTALLATION GUIDELINES 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 * Where to install the projector? Abbreviations used on drawing and diagrams on next pages B = Distance between ceiling and top of the screen. A = Correction Value, extra value to be[...]

INSTALLATION GUIDELINES INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-5 INSTALLATION GUIDELINES 3-5 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 $ &' 3' % SURMHFWRU FHLOLQJ VFUHHQZLGWK 6: )URQWY LH Z 7RSYL HZ $ &' 3' % SURMHFWRU FHLOLQJ VFUHHQZLGWK 6: )URQWY LH Z 7RSYL HZ[...]

INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-6 INSTALLATION GUIDELINES 3-6 INSTALLATION GUIDELINES 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 * How to install the projector? Ceiling mount or table mount? To install the projector, apply always the BARCO kits which are specially designed for this function. BARCO ceiling supp[...]

INSTALLATION SET UP INSTALLATION SET UP 4-1 INSTALLATION SET UP 4-1 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 INSTALLATION SET UP Access to controls Scan adaptation INSTALLATION SET UP Access to controls Scan adaptation[...]

INSTALLATION SET UP INSTALLATION SET UP 4-2 INSTALLATION SET UP 4-2 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Access to controls Opening procedure : During the projector set up and installation it is necessary to open the top cover. To gain access, proceed as follow : *Turn both lock screws with a screwdriv[...]

INSTALLATION SET UP INSTALLATION SET UP 4-3 INSTALLATION SET UP 4-3 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 During some installations it will become handy to remove the top cover totally. Therefore, - pivot the top cover ± 60° - push the top cover to the front side of the projector until it jumps out of[...]

INSTALLATION SET UP INSTALLATION SET UP 4-4 INSTALLATION SET UP 4-4 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Scan adaptation The scanning can be switch by turning the Horizontal and Vertical scan connectors and the convergence connectors. To change the scanning, it is necessary to open the projector top co[...]

INSTALLATION SET UP INSTALLATION SET UP 4-5 INSTALLATION SET UP 4-5 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 COM M P ORT (800 peripherals) REM OTE RG ( S ) B S V I D E O S-VIDEO RS2 32 OUT RS 23 2 I N COM M P ORT (800 peripherals) REM OTE RG ( S ) B S V I D E O S-VIDEO RS2 32 OUT RS 23 2 I N[...]

INSTALLATION SET UP INSTALLATION SET UP 4-6 INSTALLATION SET UP 4-6 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 A : Horizontal scan inversion Three connectors are used, one for each horizontal deflection coil. When changing the horizontal scan, insure that all three connectors are set in the same position. Se[...]

INSTALLATION SET UP INSTALLATION SET UP 4-7 INSTALLATION SET UP 4-7 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 After scan inversion, close the chassis and close the top cover. Reconnect the power cord to the wall outlet. Note Switching over from floor to ceiling or vice versa requires a complete readjustment[...]

INSTALLATION SET UP INSTALLATION SET UP 4-8 INSTALLATION SET UP 4-8 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 S el e ct w i t h o r then <ENTER> <EXIT> to return. PROJECTOR SETUP IDENTIFICATION TOTAL RUN TIME CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJECTOR ADDRESS CHANGE BAUDRATE POWER UP MODE [...]

PROJECTOR SET UP PROJECTOR SET UP PROJECTOR SET UP 5-1 PROJECTOR SET UP 5-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 PROJECTOR SET UP Password mode PROJECTOR SET UP Password mode[...]

PROJECTOR SET UP PROJECTOR SET UP 5-2 PROJECTOR SET UP 5-2 PROJECTOR SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Projector Set Up The strap on the CPU unit allow a set up of the password mode. Gaining access to the strap - Open the top cover (see installation set up) - Open the chassis (see installation set up) Projector [...]

PROJECTOR SET UP PROJECTOR SET UP PROJECTOR SET UP 5-3 PROJECTOR SET UP 5-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Password mode With a strap on the controller unit, the important projector adjustments can be protected with a password. When the password feature is enabled (strap mounted on both legs), the customer has to en[...]

POWER CONNECTION POWER CONNECTION POWER CONNECTION 6-1 POWER CONNECTION 6-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 POWER (MAINS) CONNECTION POWER (MAINS) CONNECTION[...]

POWER CONNECTION POWER CONNECTION 6-2 POWER CONNECTION 6-2 POWER CONNECTION 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Power (mains) cord connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the front of the projector. Input power (mains)[...]

POWER CONNECTION POWER CONNECTION POWER CONNECTION 6-3 POWER CONNECTION 6-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Switching on/off The projector is switched ON and OFF using the power (mains) switch ON/OFF. Pressed : ON Not pressed : OFF The projector can start now in the 'operational mode' (image displayed) or i[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-1 7-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 INSTALLATION ADJUSTMENTS Overview flow chart installation mode Scheimpfug adjustment Optical lens focusing Raster centering CRT projection angle adjustment Alignment of the proje[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-2 INSTALLATION ADJUSTMENTS 7-2 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Entering the adjustment mode Random Access Adjustment Guided Adjustment Installation (only for qualified technician) Service IRIS Select with o r then <ENTER> <EXIT> [...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-3 7-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Overview flow chart installation mode. Installation Raster Centering Optical Lens Focusing Scheimpflug Adjustment CRT Projection Angle Adjustment Adjustment Mode Overview flow ch[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-4 INSTALLATION ADJUSTMENTS 7-4 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Installation mode start up It will be necessary to perform several mechanical adjustments while in the installation mode. Remove the top cover in order to gain access to the adju[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-5 7-5 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Push the control disc up or down to highlight "Installation" and press EN- TER. ENTER continues displaying a WARN- ING. EXIT returns to operational mode. ADJUST returns[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-6 INSTALLATION ADJUSTMENTS 7-6 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 When the password mode is active, your password will be asked. Your password contains 4 digits. a) Adjusting the projector with the RCU. Enter the digits with the numeric keys on[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-7 7-7 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 b) adjusting the projector with the local keypad. When the 'compose password' menu is displayed, select with the control disc the first digit of your password and press[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-8 INSTALLATION ADJUSTMENTS 7-8 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Scheimpfug adjustment The scheimpfug correction can be adjusted separately for the three tubes within 3 ranges: range 1 : 1.4 m (55") to 1.9 m (75"), optimum screen wid[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-9 7-9 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 1. Open the top cover (see Gaining access to controls) 2. Loosen the lens bolts (do not remove them), and slide the lens to the front until the scheimflug ring can move freely (n[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-10 INSTALLATION ADJUSTMENTS 7-10 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Optical lens focusing The optical focusing procedure is performed separately for each lens. The appropriate CRT will be switched on as the user proceeds through the optical foc[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-11 7-11 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Electrical focusing The electrical focus for red, green and blue is factory preset. When they have to be readjusted, follow the procedure as described below : - Ensure the lens[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-12 INSTALLATION ADJUSTMENTS 7-12 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Raster centering The raster must be centered on the CRT screen surface of each tube, therefore, it is necessary to look into the lenses. Caution : To avoid eye discomfort while[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-13 7-13 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 233 Press ENTER to activate the raster on the Red CRT faceplate. Shift the raster with the control disc until the raster is centered in the middle of the CRT faceplate. Press E[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-14 INSTALLATION ADJUSTMENTS 7-14 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 CRT projection angle adjustment The projection angle of the red and blue CRT's is dependent on the desired size of the projected image. If the centers of green, blue and r[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-15 7-15 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 The same projection angle is misaligned for new screen width SW2. Realignment is necessary. Each screen width change requires readjust- ment of the projection angle. Projection[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-16 INSTALLATION ADJUSTMENTS 7-16 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 red crosshair green crosshair red crosshair green crosshair Move the red CRT to the outside, away from the green CRT Move the red CRT to- wards the green CRT Screws A, B, C and[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-17 7-17 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 EXIT returns to the CRT projection angle adjustment. After finishing the installation adjust- ments procedure, the 'Path selection' blue crosshair green crosshair blu[...]

INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-18 INSTALLATION ADJUSTMENTS 7-18 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Alignment of the projector. Overview of the corrections For detailed information about these corrections and procedures to be followed, see owner's manual. (pages given he[...]

APPENDIX A : CEILING MOUNT KIT CM50 APPENDIX A : CEILING MOUNT KIT CM50 A-1 APPENDIX A : CEILING MOUNT KIT CM50 A-1 APPENDIX A : CEILING MOUNT KIT CM50 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Ceiling mount kit for 700 projectors (CM50). This ceiling mount with or without pulley system enables to mount the BARCO 700 projector[...]

APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT B-1 APPENDIX B : G2 ADJUSTMENT B-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 0200498 G2 adjustment Enter the adjustment mode by pressing ADJUST and highlight Service . Press ENTER to start up the service mode. ENTER starts up the service mode. EXIT retur[...]

APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT B-2 APPENDIX B : G2 ADJUSTMENT B-2 APPENDIX B : G2 ADJUSTMENT 5975069A BARCOVISION 708 A 200498 5975069A BARCOVISION 708 200498 continue with the G2 adjustment, oth- erwise press EXIT to return to the service menu. If ENTER is pressed, the G2 menu will be displayed. The controller automatically [...]

APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT B-3 APPENDIX B : G2 ADJUSTMENT B-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 0200498 - Adjust the G2 potentiometers very slowly with a screwdriver until the corresponding LED just stops illuminating. Repeat the adjust ment for the other colors. - Once th[...]