Cisco Systems 124778 manual
- Consulta online o descarga el manual de instrucciones
- 96 páginas
- 6.63 mb
Ir a la página of
manuales de instrucciones parecidos
-
Power Supply
Cisco Systems 750W
20 páginas 1.73 mb -
Power Supply
Cisco Systems C4KX-PWR-BLANK
20 páginas 1.73 mb -
Power Supply
Cisco Systems 159330
96 páginas 6.63 mb -
Power Supply
Cisco Systems C4KXPWR750ACR
20 páginas 1.73 mb -
Power Supply
Cisco Systems 124778
96 páginas 6.63 mb -
Power Supply
Cisco Systems C4KX-PWR-750AC-F
20 páginas 1.73 mb -
Power Supply
Cisco Systems 4400
14 páginas 0.46 mb -
Power Supply
Cisco Systems 124792
96 páginas 6.63 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Cisco Systems 124778. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Cisco Systems 124778 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Cisco Systems 124778 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Cisco Systems 124778, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Cisco Systems 124778 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Cisco Systems 124778
- nombre de fabricante y año de fabricación del dispositivo Cisco Systems 124778
- condiciones de uso, configuración y mantenimiento del dispositivo Cisco Systems 124778
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Cisco Systems 124778 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Cisco Systems 124778 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Cisco Systems en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Cisco Systems 124778, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Cisco Systems 124778, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Cisco Systems 124778. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
Corporate Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 526-4100 Cisco A C/DC P o w er S ystem User Guide Re lease 1 .0 Last Upda ted: May 15, 20 05 Text Part Number: 78 -16641-02[...]
-
Página 2
THE SPECIFICATION S AND INFORMAT ION REGARDING THE PRODUCTS IN THIS MA NUAL ARE SUBJ ECT TO CHANGE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FUL L RESPONSIBILITY FOR THEIR APPLICAT ION OF ANY [...]
-
Página 3
iii Cisco AC/DC Power System User Guide, R1.0 May 2006 CONTENTS About this Guide xi Document Objectives xi Audience xi Document Organization xi Document Conventions xii Where to Find Safety and Warning Information xiii Obtaining Documentation xiii Cisco.com xiii Ordering Documentation xiii Documentation Feedback xiv Obtaining Technical Assistance x[...]
-
Página 4
Contents iv Cisco AC/DC Power System User Guide, R1.0 May 2006 2.1.4 Installation Materials 2-2 2.2 Install AC/DC Power Sy stem Components 2-3 2.2.1 Install the System Sh elf 2-4 2.2.2 Install the 1 RU Distribution Shelf 2-6 2.2.2.1 Install the Commun i cations Cablin g (Optional) 2-7 2.2.2.2 Install the DC Power Cabling (Optional) 2-8 2.2.3 Instal[...]
-
Página 5
Contents v Cisco AC/DC Power System User Guide, R1.0 May 2006 4.2.2.2 Add Modules 4-2 4.2.2.3 Remove Modules 4-3 CHAPTER 5 System Troubleshooting 5-1 CHAPTER 6 System Parts List 6-1 APPENDIX A Translated Sa fety Warnings A-1 Statement 12 —Power Supply Disconnectio n Warning A-1 Statement 43 —Jewelry Removal Warning A-3 Statement 1006—Chassis [...]
-
Página 6
Contents vi Cisco AC/DC Power System User Guide, R1.0 May 2006[...]
-
Página 7
FI GU RE S vii Cisco AC/DC Power System User Guide, R1.0 May 2006 Figure 1-1 Cisco AC/DC Power System (with Optional 1RU DC Distribution Shelf) 1-2 Figure 1-2 Component Locations (Front View) on the System Shelf with LCD Screen 1-2 Figure 1-3 Component Locations (Front View) on the System Shelf without an LCD Screen 1-3 Figure 1-4 CSCO-PWR-RECT Rec[...]
-
Página 8
Figure s viii Cisco AC/DC Power System User Guide, R1.0 May 2006 Figure 2-23 Installing GMT Cabling 2-26 Figure 2-24 Installing Fuses 2-26 Figure 2-25 Installing Load Conn ections 2-27 Figure 3-1 Removing the 1 RU DC Cabl e 3-2 Figure 3-2 Removing the 1 RU Distribution Shelf 3-3 Figure 3-3 Removing the Controller Faceplate 3-4 Figure 3-4 Removing t[...]
-
Página 9
TABLES ix Cisco AC/DC Power System User Guide, R1.0 May 2006 Table 1-1 System Configurations 1-6 Table 1-2 Cabling Spe cifications 1-6 Table 1-3 Electrical Specifications 1-6 Table 1-4 Protection Specificati ons 1-7 Table 1-5 Status and Alarm Specifications 1-7 Table 1-6 Mechanical Specification s 1-7 Table 1-7 Environmental Specifications 1-7 Tabl[...]
-
Página 10
Tables x Cisco AC/DC Power System User Guide, R1.0 May 2006[...]
-
Página 11
xi Cisco AC/DC Power System User Guide, R1.0 May 2006 About this Guide This section e xplains objecti ves, intended audience, and organi zation of this publicat ion and describes con ventions that con vey instru ctions and other infor mation. This section pro vides the follo wing information: • Document Objectiv es • Audience • Document Or ga[...]
-
Página 12
xii Cisco AC/DC Power System User Guide, R1.0 May 2006 About this Guide Document Conventions • Chapter 2, “System Installation,” p rovides the unpack ing procedure, safety considerati ons, installation process, system upgr ade information, and initial system startup fo r the po wer system. • Chapter 3, “Component Replacement,” provides [...]
-
Página 13
xiii Cisco AC/DC Power System User Guide, R1.0 May 2006 About th is Gu ide Where to Find Safety and Warning Information Where to Find Safety and Warning Information For safety and w arning in formation, refer to the Cisco Optical T ran sport Pr oducts Safety and Compliance Information document that accompan ied the product. This publication describ[...]
-
Página 14
xiv Cisco AC/DC Power System User Guide, R1.0 May 2006 About this Guide Documentation Feedba ck Y ou can order Cisco docu mentation in th ese ways: • Registered Cisco.com users (Cisco direct customers) can order Cisco pr oduct documentation from the Orderin g tool: http://www .cisco.com/en/US/partner/ ordering/inde x.shtml • Nonregist ered Cisc[...]
-
Página 15
xv Cisco AC/DC Power System User Guide, R1.0 May 2006 About th is Gu ide Obtaining Technical Assistance or model name; b y tree vie w; or for certain prod ucts, by copyin g and pasting sho w command output. Search results sho w an illustration of you r product with the ser ial number label location highli ghted. Locate the serial number la bel on y[...]
-
Página 16
xvi Cisco AC/DC Power System User Guide, R1.0 May 2006 About this Guide Obtaining Additional Publ ications and Information Obtaining Additional Publications and Information Information about Cisco products, techno logies, and networ k solutions is av ailable from various onl ine and printed sources. • Cisco Marketplace pro vides a v ariety of Cis[...]
-
Página 17
CH A P T E R 1-1 Cisco AC/DC Power System User Guide, R1.0 May 2006 1 Introduction The Cisco A C/DC Power System is a rack- mounted, A C -to-DC po wer system that provides a scalable, compact solution for po wering optical platforms at site locations with only A C power av ailable. The system accepts AC inputs and con verts them to nominal -48 VDC [...]
-
Página 18
1-2 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.1.1 System Shelf 1.1.1 System Shelf The A C/DC power system shelf consists of four rectif ier slots and system monitoring/control in terfaces. The system controller pro v ides rectif ier monitoring , operat ional data collection, alarm generati on, and intra-system comm[...]
-
Página 19
1-3 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.1.2 Rectifier Modules Figure 1-3 sho ws a front view of the versio n of the system shelf that does not hav e an LCD screen. The optional 1 R U DC distributi on shelf is also sho wn. Figure 1 -3 Com ponent Location s (Fr ont View) on the Syst em Shelf without an LCD Scr [...]
-
Página 20
1-4 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.1.3 GMT Fuses Figur e 1 -4 CSCO-PWR-RECT Rectifier Module 1.1.3 GMT Fuses The system shelf is equipped with a 10 -position GMT fuse panel. The GM T fuse panel h as a 50A maximum total capacity with a max imum fuse rating of up to 15A (for up to three positions). The fu [...]
-
Página 21
1-5 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.1.5 System Configurations Figure 1 -6 1 RU Distribution Shelf The 1R U External Distributi on Shelf can accommodate up to four Series-T rip circuit breaker positions. These breakers ha ve “bullet t ype” connectors for quick connect and disconnect ( Figure 1-7 ). Cir[...]
-
Página 22
1-6 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.1.6 General Specifications 1.1.6 General Specifications Ta b l e 1 - 2 pro vides cabling specif ications for the Cisco A C/DC Power System. Ta b l e 1 - 3 pro vides el ectrical s pecif ication s for the Ci sco AD/DC Power System. Ta b l e 1 - 4 pro vides protection spec[...]
-
Página 23
1-7 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.1.6 General Specifications Ta b l e 1 - 5 pro vides status and alarm specificat ions for the Cis co A C/DC Power System . Ta b l e 1 - 6 pro vides mechanical specifications of the Cisco A C/DC Po wer System. Ta b l e 1 - 7 provides en vi ronmenta l specifications fo r t[...]
-
Página 24
1-8 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.2 Safety Recommendations 1 1.2 Safety Recommendations Any de vice that uses electricity requir es proper guidelines to ensure safety . War ni n g Only trained and qualified pe rsonnel should be allowed to install, replace, or service this equipment. Statement 1030 War n[...]
-
Página 25
1-9 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.2.1 Installation Warning Figur e 1 -8 ESD Wr ist Strap Connection P oint • K eep the system area clear and dust-fr ee during and after the installation. • Alway s check for possible hazards before be ginning work. • This equipment is designed to permit the connect[...]
-
Página 26
1-10 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.2.3 Electrical Safety Warnings War ni n g T o prevent airflow restriction , allow clearance around the ventilation openings to be at least 2.0 inches (50.8 mm). Figur e 1 -9 T wo-Inc h Clear ance Ar ound Fr ont V entilation Opening This power system is inte nded for us[...]
-
Página 27
1-11 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.2.3 Electrical Sa fety Warni ngs War ni n g Before working on a chassis o r working near power supplies, unplug the power cord on AC units; disconnect the power at the circuit breaker on DC units. Statement 12 War ni n g This product requires short-circuit (overcurrent[...]
-
Página 28
1-12 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 1 Introduction 1.2.3 Electrical Safety Warnings[...]
-
Página 29
CH A P T E R 2-1 Cisco AC/DC Power System User Guide, R1.0 May 2006 2 System Installation This prov ides step-b y-step instructions for installing a Ci sco A C/DC Po wer System. If you are installi ng a ne w system, begi n with the “2.1 Pre-Installation” sect ion on page 2-1 . If you are upgrading an exis ting system, go to the “2.6 System Up[...]
-
Página 30
2-2 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.1.3 Installation and Commissioning Checklist • Insulated Phillips an d flathead scre wdrive r sets • Insulated wire & cable strippers/ crimpers (for ground l ug, DC cable, alarm, and GMT cab le installati ons) • 8mm socket or wrench fo r ground cab le i[...]
-
Página 31
2-3 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.2 Install AC/DC Power System Components 2.2 Install AC/DC Power System Components The follo wing sections cont ain instructions for install ing components. Figure 2-2 sho ws a dra wing of t he Cisco A C/DC Power System without rectif iers. Quick Installation Gui [...]
-
Página 32
2-4 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.2.1 Install the System Shelf Figur e 2-2 Cisco AC/DC P ow er Syst em Fr ont Vi ew 2.2.1 Install the System Shelf The system shelf should be installed first, follo wed by t he 1 R U Distrib ution Shelf (if this option is included as part of the installa tion). Ste[...]
-
Página 33
2-5 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.2.1 Install th e System Shelf Figur e 2-3 ETSI Shelf Ear Mounts (system shelf and 1RU Distr ibution Shelf) Step 2 Move the system shelf to the de sired rack/cabinet slot (allowing 1R U above the shelf if a 1 R U Distribu tion shelf will be installed ). Step 3 Sec[...]
-
Página 34
2-6 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.2.2 Install the 1 RU Distribution Shelf Figure 2-5 1 RU Distr ibuti on Cable Dressing 2.2.2 Install the 1 RU Distribution Shelf Systems equipp ed with an o ptional 1 R U Distrib ution Shelf require po wer connection s from the system shelf to the 1 R U Distrib ut[...]
-
Página 35
2-7 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.2.2 Install the 1 RU Distribution Shelf Figur e 2-6 1 RU Distr ibu tion Shelf Installation 2.2.2.1 Install the Communicat ions Cabling (Optional) If the po wer system is equi pped with the 1 R U Distribution Shelf, f ollow the instructions belo w . For po wer sys[...]
-
Página 36
2-8 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.2.2 Install the 1 RU Distribution Shelf Figur e 2-7 1 RU Distr i buti on Shelf Alar m Cabling 2.2.2.2 Install the DC Po wer Cabling (Optional) If the system is equip ped with the 1 R U Distrib ution Shelf, follo w the instruction s below . For systems without the[...]
-
Página 37
2-9 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.2.3 Install the G round Cable Figur e 2-8 Installing 1 RU DC Cabling 2.2.3 Install the Ground Cable War ni n g This equipment must be grounde d. Never defeat the ground conductor or operate the eq uipment in the absence of a suita bly installed ground conductor .[...]
-
Página 38
2-10 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.2.3 Install the Groun d Cable 2.2.3.1 Install the Cabinet/Rack Ground The equipment rack should be bo nded to the b uilding principal gr ound b usbar . Refer to the NEC, CEC, ANSI T1-333, ETSI 300-386- TC, and local codes for guidelines on bondin g telecom DC po[...]
-
Página 39
2-11 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.2.3 Install the G round Cable Figur e 2-1 0 Installing the Sy stem Shelf Gr ound Step 5 Determine if the syst em is equipped wi th the optional 1 R U Distribu tion Shelf; if so, cont inue with the “2.2.3.3 Install the 1 R U Distribution Shelf Gr ound” sectio[...]
-
Página 40
2-12 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.3 Install AC Power Cables Figur e 2-1 1 Installing the 1 RU Distr ibution Shelf Ground 2.3 Install AC Power Cables Each rectif ier in the system shelf is i ndi vidua lly po wered through a 110 /230 V A C single phase 15A circuit and dra ws a maximum of 9.1A. Eac[...]
-
Página 41
2-13 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.3 Install AC Pow er Cable s – International Electromech anical Commiss ion (IEC) – Any local or site specific codes – EN60950 War ni n g Installation of the equipment must comply with local and national electrical codes. Statement 1074 • Ne ver install d[...]
-
Página 42
2-14 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.3 Install AC Power Cables Figure 2-12 Installing the A C Cable Shelf Step 7 After attaching the A C cables , route the cables at the rear of the sh elf using the supplied tie-of fs to secure the cables and exit at the sides of the shelf ( Figure 2-13 ). 124784[...]
-
Página 43
2-15 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.3 Install AC Pow er Cable s Figur e 2-13 Routing A C Cables Step 8 A C cabling is routed through either sid e of the system shelf and secured using tie of f points. Step 9 A C cabling should be tied of f inside the cabinet /rack. Step 10 Repeat for all AC cables[...]
-
Página 44
2-16 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.3.1 Install the Rectifiers 2.3.1 Install the Rectifiers T o install the rectif iers in the Cisco A C/DC Power System: Step 1 Locate the first (left-most wh en vie wed from the front) rectifi er install location . Step 2 Make sure that th e rectifier handle is in[...]
-
Página 45
2-17 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.3.1 Install the Rectifiers Figur e 2-14 Installing a Rectifier Step 6 T ighten the handle-mounted common scre ws into the rectifier to ensure a firm co nnection ( Figure 2-14 #2). Step 7 Repeat this procedu re for any addition al modules (two total fo r small sy[...]
-
Página 46
2-18 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.4 Install Circuit Breakers Figure 2-15 Removing a Re ctifier Blank F aceplate Step 8 Install additional rect ifiers using t he instructions in Steps 2 through 5 . For more information on i nstalling re ctif iers in a po wered system, see the “4.2.2.2 Add Modul[...]
-
Página 47
2-19 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.4 Install Circuit Breakers Figur e 2-16 Cir cuit Br eak er On/Off P ositions Step 2 Remove the 1 R U Distribution Shelf f aceplate by lo osening the two thumbscre w s on the shelf faceplate ( Figure 2-17 ). Figur e 2-17 Remo ving the 1 RU Distribution Shelf F ac[...]
-
Página 48
2-20 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.4 Install Circuit Breakers Step 5 Gently glid e the breaker so that th e quick disc onnect plugs a re aligned w ith the mou nting holes ( Figure 2-18 ). Figur e 2-18 Installing a Cir cuit Br eak er Step 6 Push the break er until the quick disconnect plugs are f [...]
-
Página 49
2-21 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.4.1 Install the Alarm Cable Step 8 Replace the 1 R U Distribu tion Shelf faceplate and tighten the thumbscre ws. 2.4.1 Install the Alarm Cable The follo wing e xplains ho w to install alarm communi cation cabling to the Ci sco A C /DC Po wer System Controller . [...]
-
Página 50
2-22 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.4.1 Install the Alarm Cable Figure 2-19 Removing the Controller Faceplate Step 2 Slide the drawer out and aw ay from the syst em shelf to access the alarm interface board. Step 3 The terminal bl ock may be removed to make alarm cable connections ( Figure 2-20 ).[...]
-
Página 51
2-23 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.4.1 Install the Alarm Cable Figur e 2-20 Installing an Alar m Cable Step 4 Alarm contacts labeled 1 thro ugh 4, NO, C, and NC refer to the OFF state of the po wer system and alarmed condition ( Ta b l e 2 - 6 ). Note Either NO or NC can be used for ala rming. Fi[...]
-
Página 52
2-24 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.5 Install Load-and-Re turn Connections Figur e 2-21 Alar m Boar d Connection P oints Step 7 Reinsert the terminal block ( Figu re 2-20 #3). Step 8 Alarm cables run from the rear of the s ystem shelf (lea vi ng enough of a service loop to allo w the drawer to sli[...]
-
Página 53
2-25 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.5.1 Install GMT Fuse Connections 2.5.1 Install GMT Fuse Connections Load connections to th e GMT fuse panel are made us ing spring loaded terminals that do not requi re the use of conne ction lugs . Step 1 Locate the GMT fuse connections by removing the controll[...]
-
Página 54
2-26 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.5.2 Install 1 RU Distri bution Shelf Lo ad Connections Figur e 2-23 Installing GMT Cabling Step 4 Connect cables to equ ipment that requires the sup pli ed DC Power per that eq uipment’ s specifications. Step 5 Install fuses b y sliding them into th e appropri[...]
-
Página 55
2-27 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.5.2 Install 1 RU Distribu tion Shelf Load Connections Step 1 Select the wire gauge fo r the application. See T able 2-7 on page 2-24 for wiring infor mation. Step 2 Locate the load-and-return connections at th e rear of the 1 R U Distrib ution Shelf ( Figu re 2-[...]
-
Página 56
2-28 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.6 System Upgrades Step 8 Repeat for add itional DC ca bling. 2.6 System Upgrades If the installation is an upgrade o f a pre-existin g system, the follo wing sections giv e a list of the procedures needed to upgrade the system: • 2.6.1 GM T Fuses, page 2-28 ?[...]
-
Página 57
2-29 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.6.3 Medium to Large System Upgrade 2.6.3 Medium to Large System Upgrade T o upgrade a me dium system (3 rect ifiers, 1 R U Distribution Shelf with 2 cir cuit breakers) to a larg e system (4 rectif iers, 1 R U Distribution Shel f with 4 circuit breakers), use the[...]
-
Página 58
2-30 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 2 System Installation 2.6.4 Small to Large System Upgrade[...]
-
Página 59
CH A P T E R 3-1 Cisco AC/DC Power System User Guide, R1.0 May 2006 3 Component Replacement This chapter cont ains information about rep lacing Ci sco A C/DC Power Syst em components in the f ield. Consult this chapter in the e vent of a system malfunction. 3.1 Safety The follo wing warnin g should be follo wed to ensure personal safety and to prot[...]
-
Página 60
3-2 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 3 Compone nt Replacement 3.2.1 Replace the 1 RU Distribution Shelf Figur e 3-1 Removing the 1 RU DC Cable Step 5 Locate the distribution alarm cable at the rear of the 1R U DC Distribution Shelf. Step 6 Remov e the 10 pin Molex™ alarm cable by squeezing the top and pulling the cable a[...]
-
Página 61
3-3 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 3 Component Replacement 3.2.2 Replace the Controller Tray Figur e 3-2 Removing the 1 RU Distr ibution Shelf Step 12 Slide the 1R U Distribution Shel f away from the cabinet/rack. Step 13 T o reinstall a replacement 1R U Distribution Shelf, comlete the “2.2.2 Install the 1 R U Distribu[...]
-
Página 62
3-4 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 3 Compone nt Replacement 3.2.2 Replace the Controller Tray Figure 3-3 Removing the Contr oller F a ceplate Step 3 Slide the controll er tray out and aw ay from the system shelf to access the Alarm Interface Board ( Figure 3-3 #2). Step 4 Remov e the Alarm Interface Board DC terminal blo[...]
-
Página 63
3-5 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 3 Component Replacement 3.2.2 Replace the Controller Tray • –J15 termin al block • – J14/J13 terminal blocks Figure 3-4 Removing the Alar m Interf ace Board Cabl e on the V ersion 1 of the Contr oller Hardw ar e Figure 3-5 Removing the Alar m Interf ace Board Cabl e on the V ers[...]
-
Página 64
3-6 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 3 Compone nt Replacement 3.2.3 Replace Circuit Breakers • J8 termin al block ( Figure 3-4 or Figure 3-5 #4) • J1 Ethernet cable ( Figure 3-4 or Figure 3-5 #5) • J1 termin al block ( Figure 3-4 or Figure 3-5 #6) Step 14 Reconnect the alarm c able connections ( Figure 3-4 or Figure [...]
-
Página 65
3-7 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 3 Component Replacement 3.2.3 Replace Circuit B reakers Figur e 3-7 Removing the 1 RU Distr ibution Shelf Faceplat e Step 3 Locate the breaker that is to be removed. Step 4 Grasp the breaker f irmly at the front and pull out until the qui ck disconnects diseng age from their mounts. 124[...]
-
Página 66
3-8 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 3 Compone nt Replacement 3.2.4 Replace a Rectifier Figure 3-8 Removing a Cir cuit Br eake r Step 5 Remov e the alarm cable connections fro m the rear of the breaker ( Fi gure 3-8 ). Step 6 Pull the breaker straight out fro m the 1R U Distribution Sh elf. Step 7 T o reinstall a replaceme[...]
-
Página 67
3-9 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 3 Component Replacement 3.2.4 Replac e a Rectifier Figur e 3-9 Removing a Rectifier Step 4 Grasp the hand le and gently pull the mod ule out and away from the sh elf. Caution The rectifier mo dule may be hot when bein g pulled from the shelf. T o av oid personal injury , wait until the [...]
-
Página 68
3-10 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 3 Compone nt Replacement 3.2.5 Replace GMT Fuses 3.2.5 Replace GMT Fuses Step 1 Locate the GMT fuse that is to be re mov ed. Step 2 Grasp the fuse f irmly at the front and pull out ( Figu re 3-10 ). Figure 3-1 0 Removi ng a GMT Fuse Step 3 For informati on on insta lling GMT fuses, see[...]
-
Página 69
CH A P T E R 4-1 Cisco AC/DC Power System User Guide, R1.0 May 2006 4 System Operation 4.1 System Commissioning The follo wing section shoul d be used to po wer-up the system for the f irst time. Step 1 T urn on A C breakers at the A C distribution panel to p ower up the shelf through the rectif iers. Step 2 The controller and rectif ier LEDs will [...]
-
Página 70
4-2 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 4 Syste m Operation 4.2.1 Alarm Interface Board and Conne ctions 4.2.1 Alarm Interface Board and Connections The alarm in terface board is the main co nnectio n point for external commu nication i nputs. The board is located inside the controller and can be accessed by re moving the fro[...]
-
Página 71
4-3 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 4 System Operation 4.2.2 Basic Controller Functions Step 3 During this recognition time t he controller may report module-related alarms and the red LED on t he rectifier may turn on. These alarms are caused b y imbala nces related to load sharin g of the rectifiers (the ne w rectifier?[...]
-
Página 72
4-4 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 4 Syste m Operation 4.2.2 Basic Co ntroller Functions[...]
-
Página 73
CH A P T E R 5-1 Cisco AC/DC Power System User Guide, R1.0 May 2006 5 System Troubleshooting This chapter contains informatio n about troubleshooting and should be consulted in the e vent o f a system malfunction. The follo wing is a list of potential problems and resolutions. If the f irst recommendation does not solv e the problem, continue on to[...]
-
Página 74
5-2 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 5 S ystem Troubleshooting Error Message Distribution Fuse/Breaker Failure (Red light on controller, Relay #4) Explanation 1. T ripped break er 2. Fu s e bl ow n Recommended Action 1. Localize the faulty breaker or blo wn fuse 2. V erify there are no short circui ts in the cab ling to th[...]
-
Página 75
5-3 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 5 System Troubleshooting Figur e 5-1 Module Locations Note Sometimes the rectif ier that indicates a fail ure is not the cause of the f ailure. The failu re may be caused by a current share imbalance. If the failure persists ev en after replacing the rectif iers showing a f ault, replac[...]
-
Página 76
5-4 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 5 S ystem Troubleshooting[...]
-
Página 77
CH A P T E R 6-1 Cisco AC/DC Power System User Guide, R1.0 May 2006 6 System Parts List This chapter contai ns a list of replacement p arts and part numbers for the Cisco A C/DC Po wer System. T able 6-1 Par ts List Description Part Number Main Shelf Assembly CSCO-SM-PWR-SA Rectifier Module CSCO-PWR-RECT Controller Mo dule CSCO-CNTRL-BRD 1R U DC Di[...]
-
Página 78
6-2 Cisco AC/DC Power System User Guide, R1.0 May 2006 Chapter 6 System Parts List[...]
-
Página 79
A-1 Cisco AC/DC Power System User Guide, R1.0 May 2006 APPENDIX A Translated Safety Warnings This appendix contains the tran slated warnings included in th e Cisco A C/DC Po wer System user documentation. The translated safety warnings ar e listed in th e following order: Statement 12—Power Supply Disconnection Warning 1 English 10 Swedish 19 Cro[...]
-
Página 80
A-2 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Warnung Bevor Sie an einem Chassis oder in der Nähe von Netzgeräten arb eiten, ziehen Sie bei W echselstromeinheiten das Netzkabel ab bzw . schalten Sie bei Gleichstromeinheite n den Strom am Unterbrecher ab. Avvertenza Prima di lavorare su un telaio o i[...]
-
Página 81
A-3 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Statement 43—Jewelry Removal Warning War ni n g Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connecte d to power and ground and can cause serious b[...]
-
Página 82
A-4 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Statement 1006—Chassis Warning for Rack-Mounting and Servicing War ni n g T o prevent bo dily injury when mounting or servic ing this unit in a rack, you must take special precautions to ensu re that the sy stem remains stable. The following guidelines a[...]
-
Página 83
A-5 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings V aroitus Kun laite asetetaan telinee seen tai huolletaan sen o llessa telineessä, on noudat ettava erityisiä varotoimia järjestelmän vakavuuden säilyttämi seksi, jotta vältytään loukka antumiselta. Noudata seuraavia turvallisuusohjeita: • Jos t[...]
-
Página 84
A-6 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Avis o Para se prevenir con tra danos corporais ao monta r ou reparar esta unidade num a estante, deverá tomar precauções especiais para se certificar de qu e o sistema possui um suporte estável. As seguintes directrizes ajudá-l o-ão a efectuar o seu[...]
-
Página 85
A-7 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Avis o Para evitar lesões corporais ao montar ou dar manutenção a esta unidade em um rack, é necessário tomar todas as precauções para garantir a estabilidade d o sistema. As seguintes orientações são fornecidas para garantir a sua segurança: ?[...]
-
Página 86
A-8 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings[...]
-
Página 87
A-9 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Statement 1017—Restricted Area War ni n g This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special to ol, lock and key , or other means of security . Statement 1017 Waar[...]
-
Página 88
A-10 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Avvertenza Questa unità è previ sta per essere installata in un'a rea ad accesso limitato, vale a dire un'area accessibile solo mediante l'uso di un attrezzo speciale, come luc chetto e chiave, o altri dispositivi di sicurezza. Advarsel D[...]
-
Página 89
A-11 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Statement 1024—Ground Conductor War ni n g This equipment must b e grounded. Never defeat the ground conductor or operate the equip ment in the absence of a suitably installed grou nd conductor . Contact the appropriate elect rical inspection authority [...]
-
Página 90
A-12 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Attention Cet équipement doit ê tre mis à la masse. Ne jamais ren dre inopérant le conducteur de masse ni utiliser l'équipement sans un conducteur de masse adéquatem ent installé. En cas de doute sur la mise à la masse a ppropriée disponible[...]
-
Página 91
A-13 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Statement 1030—Equipment Installation War ni n g Only trained and qualified p ersonnel should be allowed to install, replace, o r service this equipment. Statement 1030 Waarschuwing Deze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld[...]
-
Página 92
A-14 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Statement 1033—SELV-IEC 60950 DC Power Supply Advarsel Kun uddannede person er må installere, udskifte komponent er i eller servicere dette udstyr . War ni n g Connect the unit only to DC power source that complies with the safety extra-low voltage (SE[...]
-
Página 93
A-15 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Statement 1047—Overheating Prevention War nu n g Schließen Sie die Einheit nur an eine Gleichstrom-Stromquelle an, die mit den Safety Extra-Low V oltage (SEL V)-Anforderungen in de n auf IE C 60950 basierenden Sicherheitsstandards übereinstimmen. Avve[...]
-
Página 94
A-16 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings V aroitus Jotta järjestelmä ei kuum entuisi liikaa, sitä ei saa käyttää liia n kuumassa ympäristössä. Suosituksen mukaine n käyttölämpötila on enintään 55°C (131°F) Attention Pour éviter toute surchauffe du sy stème, il est recommandé [...]
-
Página 95
A-17 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings Statement 1074—Comply with Local and National Electrical Codes War ni n g Installation of the e quipment must comply with local and national electrical c odes. Statement 1074 Waarschuwing Bij installatie van de apparatuur moet worden volda an aan de lok[...]
-
Página 96
A-18 Cisco AC/DC Power System User Guide, R1.0 May 2006 Appendix A Tran slated Safety Warnings[...]