Cisco UCS-SPR-C220-V1 manual

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco U CS C220 M3 S er v er Installation and S er vice Guide Covers S erver Generatio n M3 October 29, 20 13 Text Part Number: OL-25760-01[...]

THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN TH IS MANUAL A RE SUBJECT TO CHAN GE WITHOUT N OTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDA TIONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSI BILITY FOR THEIR APPLICATION OF ANY P[...]

iii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 CONTENTS Preface vii Related Documentation vii Organization vii Audience viii Documentation Feedback viii Conventi ons viii Obtaining Documentation and Submitting a Serv ice Request xiii xiv CHAPTER 1 Overview 1-1 External Features Ov erview 1-1 Summary of Server Features 1-3 CHA[...]

Contents iv Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 CHAPTER 3 Maintaining the Server 3-1 Server Monitoring and Ma nagement Tools 3-1 Cisco Integrated Manageme nt Interface (CIMC) 3-1 Server Configuration Utility 3-1 Status LEDs and Buttons 3-2 Front Panel LEDs 3-2 Rear Panel LEDs and Buttons 3-4 Internal Diagnostic LEDs 3-[...]

Contents v Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Replacing a Cisco Flexible Flash Card 3-40 Overview of the Pre-Installed Cisco Flexible Flash Card 3-40 Enabling a Cisco Flexib le Flash Virtual Drive 3-41 Booting a Cisco Flexible Flash Virtual Drive 3-41 Monitoring and Managing a Cisco Flexible Flash Ca rd 3-42 Synchroni[...]

Contents vi Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Enabling the Embedded RAID Controller in the BIOS C-10 Disabling the Embedded RAID Controller in the BIOS C-11 Launching the LSI Embedded RAID Configura tion Utility C-11 Installing LSI MegaSR Drivers For Windows and Linux C-11 Downloading the LSI MegaSR Drivers C-12 Micr[...]

vii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface This preface describes the audi ence, organi zation, and conventions o f the Cisco UCS C220 Server Installation an d Service Guide . It al so provides information about h ow to obtain related docum entation. Related Documentation The documentation set for the Cisco Unifie[...]

viii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Audience This guide is for experien ced network administra tors who configu re and maintain Cisco servers. Documentation Feedback T o provide technical feedback on this document, or to report an error or omissi on, please send your comments to ucs-docfeedback@external.ci[...]

ix Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface V aroitus TÄRKEITÄ TURVALLISUUSOHJEIT A Tämä varoitusmerkki merkitsee vaaraa. T ilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemisee n liittyvät riskit ja tutustu onnettomuuksien yl eisiin ehkäisytapoih[...]

x Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conh ecimento dos perigos envolvidos no manu[...]

xi Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipam ento, esteja ciente dos riscos que envolvem os circuitos elétricos e[...]

xii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface[...]

xiii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Obtaining Documentation and Submitting a Service Request For information on obtai ning documentation, using the Cisco Bug Search T ool (BST), submitting a service request, and gathering additional information, see What’ s New in Cisco Product Docume ntation at: http://[...]

xiv Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface[...]

CH A P T E R 1-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 1 Overview This chapter provi des an overview of the Cisco U CS C220 server features. External Features Overview , page 1-1 Summary of Server Feat ures, page 1-3 External Features Overview The figures in this chapter show an overview of external server features. (Inte[...]

1-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew Figure 1-1 shows the front pa nel features of the SFF driv es version of the server . Figur e 1 -1 Cisco UCS C220 Server (Small For m F act or Dr iv es) Fr ont P anel Feat ur es Figure 1-2 shows the front panel features of the LFF drives version of the server [...]

1-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 1 Overview Figure 1-3 shows the rear panel features of the server (identical for both versions of the server) . Figur e 1 -3 Rear P anel Featur e s Summary of Server Features Ta b l e 1-1 lists the features of the server . . 1 Power supplies (two) 6 1-Gb Ethern et dedicate[...]

1-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew Network and management I/O The server provides thes e rear-panel connectors: • One 1-Gb Ethernet dedicated management port • T wo 1-Gb Base-T Ethernet ports • One RS-232 serial port (RJ-45 connector) • One 15-pin V GA 4 connector • Tw o U S B 5 2.0 c[...]

1-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 1 Overview 6. SAS = serial attached SCSI 7. SATA = serial advanced technology attach ment[...]

1-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew[...]

CH A P T E R 2-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 2 Installing the Server This chapter d escribes how to install the server, and it includes the fo llowing sectio ns: • Unpacking and Inspecting t he Server , page 2-2 • Preparing for Server Installation, page 2-3 • Installing the Server In a Rack, page 2-5 • I[...]

2-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Unpacking and Inspecting the Server Unpacking and Inspecting the Server Caution When handling internal server co mponents, wear an ESD strap and handl e modules by the carrier edges only . Ti p Keep the shipping container in case the server require[...]

2-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Preparing for Serv er Installation Preparing for Server Installation This section prov ides information abou t preparing for server installation, and it includes the following topics: • Installation Guidelines, p age 2-3 • Rack Requirements, pag[...]

2-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Preparing for Server Installation When you are installing a server , use the foll owing guidelines: • Plan your site configuratio n and prepare t he site before ins talling the serve r . See th e Cisco UCS Site Pr eparation Guide for the recommen[...]

2-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Installing the Server In a Rack This section describes how to install the server in a rack. War ni ng T o prevent bodily injury when m ounting or servicing this unit in a rack, you must take special precautions to ens[...]

2-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Step 2 Install the slide rails onto the rack: a. Position a slide-rail assembly inside th e two left-side r ack posts (see Figure 2-3 ). Use the “FRONT” and “REAR” markings on the slide- rail assembly to orie[...]

2-7 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack b. Push the server into t he slide rails until it st ops at the internal st ops. c. Push in the plas tic release clip on each inner rail (labelled PUS H), and then continue pushing t he server int o the rack until its[...]

2-8 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Figur e 2-5 Attac hing the Cable Management Ar m (Rear of Server Shown) Step 6 Continue with the “Initial Serv er Setup” section on page 2-9 . 1 Flange on rear of outer left slide rail 5 Inner CMA arm attachment [...]

2-9 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Initial Server Setup This section includes the following topics: • Connecting and Po wering On the Server (S tandalone Mode), p age 2-9 • NIC Modes and N IC Redundancy Set tings, page 2-12 Connecting and Powering On the Serv[...]

2-10 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Step 3 Set NIC mode, NIC redund ancy , and choose whether to enable DHCP or set static network setti ngs: a. Press the Po w er button to boot the server . W atch for the prompt to press F8. b. During b ootup, press F8 when pro[...]

2-11 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Note If you chose to enable DHCP , the dynamically assigned IP a nd MAC ad dresses are displayed on the console screen durin g bootup. Step 4 Connect to the CIMC for server management. Connect Ethernet cables from your LAN to t[...]

2-12 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup NIC Modes and NIC Redundancy Settings This server h as the follo wing NIC mode settings th at you can choose from: • Shared LOM EXT (default)—This is shared LOM extended mode. This is the factory-default setting, along wi [...]

2-13 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server System BIOS and CI MC Firmware System BIOS and CIMC Firmware This section includes inf ormation about the system BIOS an d it includes the foll owing sections: • Updating the BIOS and CIMC Firmware, page 2-13 • Accessing the System BIOS, page 2[...]

2-14 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server System BIOS and CIMC Firmware Accessing the System BIOS T o change the BIOS settings for your server , follow these steps. Detailed instructions are also pr inted on the BIOS screens. Step 1 Enter the BIOS setup utility by pressing the F2 key wh e[...]

2-15 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Service Headers and Jumpers This section includes the following topics: • Header Locations on the Motherboard, page 2-15 • Using the BIOS Recovery Header J41, page 2-16 • Using the Clear CMOS Header J37, page 2-1[...]

2-16 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers Using the BIOS Recovery Header J41 Depending on which stage t he BIOS becomes corrupted, you might see dif feren t behavior . • If the BIOS BootBlock is co rrupted, you might see the system get stuck on the following[...]

2-17 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Note During the BIOS update, the CIMC will shut down the server and the screen will be blank for about 10 minutes. Do n ot unplug the power cords during this update. The CIMC will p ower on the server after th e update[...]

2-18 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers Procedure 2: Use Recovery Jumper and recovery.cap File See Figure 2-6 for the location of the J41 header . Step 1 Download the BIOS update package an d extract it to a tem porary loca tion. Step 2 Copy the contents of [...]

2-19 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Using the Clear CMOS Header J37 See Figure 2-6 for the location of this header . Y ou can jump er this header to clear the server’ s CMOS settings in the case of a system hang. F or exam ple, if the server hang s bec[...]

2-20 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers[...]

CH A P T E R 3-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 3 Maintaining the Server This chapter describes how to diagnose server system problems using LEDs. It also provides i nformation about how to install or replace hardware co mponents, and it includes the foll owing sections: • Server Monitoring and M anagement T ool [...]

3-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Status LEDs an d Buttons Status LEDs and Buttons This section describes the location and meaning of LEDs and buttons and includes th e following topics • Front Panel LEDs, page 3-2 • Rear Panel LEDs and Button s, page 3-4 • Internal Diagnos[...]

3-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Status LEDs and Button s System status • Green—The server is running in normal operating condition. • Green, blinking—The server is performi ng system initialization and memory check. • Amber , steady—The server is in a de gr aded opera[...]

3-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Status LEDs an d Buttons Rear Panel LEDs and Buttons Figure 3-2 shows the rear panel LEDs and buttons. Ta b l e 3-2 defines the LED s tates. Figur e 3-2 Rear P anel LEDs and Butt ons 1 Power supply fau lt LED 5 1-Gb Ethernet link sp eed LED 2 Pow[...]

3-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Status LEDs and Button s 1-Gb Ethernet de dicated management link status • Off—No l ink is present. • Green—Link is active. • Green, blinking—T raffic is present on the active link. 1-Gb Ethernet link speed • Off—link speed is 10 Mb[...]

3-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Status LEDs an d Buttons Internal Diagnostic LEDs The server has internal fault LEDs for fan modules and DIMMs. An LED lig hts amber to indi cate a failed component. Note Power must be connected to t he serv er for these LEDs to be operate. See F[...]

3-7 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Preparing for Server Component Installation This section descri bes how to prepare for component install ation, and it includes the followin g topics: • Required Equipment , page 3-7 • Shutting Down [...]

3-8 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Preparing for Server Co mponent Installation Removing and Replacing the Server Top Cover T o remove or replace the top co ver of the server , follow these steps: Ti p Y ou do not have to remove the cover to replace hard drives o r power supplies.[...]

3-9 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Replaceable Component Locations This section shows the lo cations of the componen ts that are discussed in this ch apter . The v iew in Figure 3-5 is from the top down with the top cover and air baffl es[...]

3-10 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Preparing for Server Co mponent Installation Serial Number Location The serial number for th e server is printed on a label on the to p of the server , near the front. Color-Coded Touch Points This server has color -coded touch po ints that in d[...]

3-11 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Installing or Replacing Server Components War ni ng Blank faceplates and c over panels serve three important functions: they prevent ex posure to hazardous voltages and currents inside the chassis; they c[...]

3-12 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing Hard Drives or Solid State Drives This section includes th e following information: • Drive Populatio n Guidelines, page 3-12 • Drive Replacement Procedure, page 3-13 Drive Population Guid[...]

3-13 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Drive Replacement Procedure T o replace or install a hot-pluggab le hard drive, follow these steps: Ti p Y ou do not have to shut down or power off the server to replace hard drives or solid state drives [...]

3-14 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing a Drive Backplane Note The Small Form Factor (eight-d rive) and Lar ge Form Factor (four -drive) backplanes and their corresponding chassi s drive bays are factory-config urab le options. When[...]

3-15 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-9 Replacing the Dr ive Bac kplane 1 Captive thumbscrews (two),  securing backplane to chassis floor 5 Backplane (SFF versi on shown removed from server) 2 Supporting hooks on chassis (three) [...]

3-16 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing Fan Modules The five fan modules in the server are numbered as follows when you ar e facing the front of the server (also see Figure 3-1 1 ). Figur e 3-1 0 F an Module Num ber ing Ti p Each fa[...]

3-17 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-1 1 Replacing F an Modules 1 Rubber dampening gasket s (two on each fan module) 3 Fan connector to mot herboard 2 Fan module fault LED on motherboard  (one for each fan module) FAN1 FAN1 FAN1[...]

3-18 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing DIMMs This section includes the following topics: • Memory Performance Guideli nes and Population Rules, page 3-18 • DIMM Replacement Procedure, pa ge 3-21 Caution DIMMs and their sockets [...]

3-19 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-12 DIMM Slots and CPUs DIMM Population Rules Observe the following g uidelines when installing or rep lacing DIMMs: • Each CPU supports fou r memory channels. – CPU1 supports channels A, B, [...]

3-20 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components • Although 1600 MH z DIMMs can be run in Power Saving Mode (1.35 V operation), 160 0 MHz operation is supported only when the DDR mode is set to Performance Mode (see “ Enabling Low-V oltage DIMM Op[...]

3-21 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Memory Mirroring When memory mirroring is en abled, the memory subs ystem simultaneo usly writes i dentical data to two channels. If a memory read from one of the channels returns incorrec t data due to a[...]

3-22 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components c. Remove the top cover as described in “Removing and Replacing the Serv er T op Cover” sectio n on page 3-8 . d. Identify the faulty DIMM by observi ng the DIMM slot fault LEDs on the mo therboard.[...]

3-23 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing CPUs and Heatsinks This section contains the following topics: • Special Information For Upg rades to Intel E5-2600 v2 Series CPUs, page 3-23 • CPU Configuration Rules, page 3-23 • CPU Rep[...]

3-24 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components CPU Replacement Procedure Caution CPUs and thei r motherboard s ockets are frag ile and must be handled with care to avoid damaging p ins during installation. The CPU s must be installed with heatsinks [...]

3-25 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-13 CPU Heatsink and Sock et Step 2 Remove a protective cap or an old CPU from the socke t (if present): • If you are remo ving an old CPU, skip to Step 3 . • If you are installing a new CPU [...]

3-26 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components d. Press the top button on the tool to release the ol d CPU on an anti-static surface. Figur e 3-15 Removing or Inser ting a CPU Step 4 Insert the new CPU into the Pick- and-Place tool: a. Remove the ne[...]

3-27 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-16 CPU and Pick-and-Place T ool on P edestal Step 5 Install a new CPU: a. Set the Pick-and-Place tool with CPU over the empty C PU socket on the motherboard. Note Align the arrow on the to p of [...]

3-28 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components c. Apply thermal grease from an included syringe to the top of the CPU. Apply about 2 cubic centimeters of grease (about half the syringe con tents) to the top of t he CPU in the pattern that is shown i[...]

3-29 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Additional CPU-Related Parts To Order With RMA Replacement Motherboards When a return material authori zation (RMA) of the motherboard o r CPU is done on a Cisco UCS C-series server, there are additional [...]

3-30 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing the Motherboard RTC Battery War ni ng There is danger of explosion if the battery is replaced i ncorrectly . Replace the battery only w ith the same or equivalent type rec ommended by the manu[...]

3-31 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-18 Replacing the Motherboard R TC Bat tery Replacing a Mezzanine Card The server has a dedicated socket on the mother board for a mezzanine-styl e RAID controller card. Note See RAID Controller [...]

3-32 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components e. Loosen the singl e captive thum bscrew that secures the mezzanine card to the motherboard standoff. f. Pull the mezzanine card toward the server front about one inch to disengage it fro m its motherb[...]

3-33 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a PCIe Riser The server contains two t oolless PCIe risers for horizontal installation of PCIe cards. See Ta b l e 3-7 for a description of the PCIe slot s on each riser . Figur e 3-20 Rear P an[...]

3-34 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Figur e 3-21 Replacing the PCIe Riser 1 Chassis alignment peg for PCIe riser 1 3 Chassis alignment pegs for PCIe riser 2 2 Rear alignment tabs – FAN1 FAN1 FAN1 FAN2 FAN2 FAN2 FAN3 FAN3 FAN3 FAN4 FAN4 [...]

3-35 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a PCIe Card Caution Cisco supports all PCIe cards qualified and sold by Ci sco. PCIe cards not qual ified or sold by Cisco are the responsibil ity of the customer . Although Cisco will alw ays s[...]

3-36 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing a PCIe Card Note If you are i nstalling a Ci sco UCS V irtual Interf ace Card, ther e are prereq uisite consid erations. See Special Considerations for Cisco UCS V irtual Interf ace Cards, pag[...]

3-37 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents g. Replace the server in the rack , replace cables, and then power on the server by pressing the Power button. h. If the card tha t you replaced was a RAID controller , continue with Restoring RAID Config[...]

3-38 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components RAID Controller Card Cable Routing If the PCIe card that you ar e installing or replacing is a RAID controll er card, see RAID Controller Considerations, page C-1 for required cables and cable routing g[...]

3-39 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Resolving Insufficient 16-Bit I/O Space The system has only 64 KB of legacy 16-bit I/O resour ces available. This 64 KB of I/O space is divided between the CPUs in the sys tem because the PCIe co ntroller[...]

3-40 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing a Cisco Flexible Flash Card This section includes the following topics: • Overview of the Pre-Instal led Cisco Flexible Flash Card, page 3-40 • Enabling a Cisco Flexible Flash V irtual Dri[...]

3-41 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Enabling a Cisco Flexible Flash Virtual Drive Each of the VDs on the pr e-installed Cisco Flexible Fl ash card can be separately enabled or hidden from the host. The default as shipped fro m the factory i[...]

3-42 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components T o permanently set the boot ord er fo r an HV VD, use the following steps: Step 1 Boot the server and watch for the pro mpt to press F2 to open the BIOS Setup ut ility . Step 2 When prompted, press F2 [...]

3-43 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Cisco Flexible Flash Card Replacement Procedure T o install or replace a Cisco Flexib le Flash card, follow these steps: Step 1 Remove the Cisco Flexible Flash car d that you are replacing. See Figure 3-2[...]

3-44 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Step 2 Install a Cisco Flexible Flash card: Note T o be usable for Cisco Flexible Flash, an SD card must be at least 16 GB in size. Note Any SD card that is installed i nto the Cisco Flexible Flash slo [...]

3-45 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing the LSI RAID Battery Backup Unit or SuperCap Power Module This server supports installation of one RAID battery backup unit (BBU) or on e SuperCap Power Module (SCPM). The unit mounts to a clip [...]

3-46 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Figur e 3-24 RAID Bac kup Unit Mounting Location 1 RAID backup unit mounting location – 1 331725[...]

3-47 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Installing a Trusted Platform Module The trusted p latform mo dule (TPM) is a sm all circu it board that attaches to a motherboard socket. The socket location is on the motherboard, below PCIe riser 1 (se[...]

3-48 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Step 4 V erify that the TPM is now enabled. a. W atch during bootup for the F2 promp t, and then press F2 to enter BIOS setup. b. Log into the BIOS Setup utility with yo ur BIOS Administrator password .[...]

3-49 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Step 1 V erify that a TPM is now installed and enab led in the server: a. Either attach a VGA monitor and USB ke yboard to th e server , or log in remotely to the CIMC interface of the server and open a v[...]

3-50 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing a SCU Upgrade ROM Module T o remove and replace a module, use the f ollowing procedure. Step 1 Prepare the server for component installation: a. Power off the server as described in Sh utting [...]

3-51 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a Software RAID Key Module T o remove and replace a software RAI D key module, use the following procedur e. Step 1 Prepare the server for component installation: a. Power off the server as desc[...]

3-52 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing Power Supplies The server can have one or two power supplies. When two power sup plies are installed they are redundant as 1+1. • See Power Specifications, page A-3 for more information abou[...]

3-53 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-28 Removing and Replacing P ower Supplies Wiring a DC Power Supply War ni ng A readily accessible two-poled d isconnect device must be incorporate d in the fixed wiring. Statement 1022 War ni ng[...]

3-54 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Use the follo wing procedure to co nnect wires to the DC po wer supply connector: Caution Before be ginning this wiring procedure, tu rn of f the DC po wer source from your faci lity’ s circuit breake[...]

3-55 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Enabling or Disabling the Internal USB Port The factory default is for all USB ports on the server to be enabled. However , the internal USB por t can be enabled or disabled in th e serv er BIOS. T o enab[...]

3-56 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components[...]

A-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX A Server Specifications This appendix lists t he technical specification s for the server and includ es the following sections: • Physical Specifications, page A-1 • Environmenta l Sp ecifications, page A-2 • Power Specifica tions, pa ge A-3 Physical Specifications[...]

A-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix A Server Sp ecifications Environmental Specifications Environmental Specifications Ta b l e A-2 lists the environmental speci fications for the server . Ta b l e A -2 Envir onmental Specifications Description Specification T emperature, oper ating: 41 to 104°F (5 to 40 ?[...]

A-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix A Server Spec ifications Power Spec ifications Power Specifications The po wer specificatio ns for the po wer supply opti ons are listed in the foll owing sections: • 450W AC Power Supply , page A-3 • 650W AC Power Supply , page A-4 • 930W DC Power Supply , page A-[...]

A-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix A Server Sp ecifications Power Specifications 650W AC Power Supply Ta b l e A-4 lists the specifications for each 650 W AC power supply (Cisco par t number UCSC-PSU-650W). 930W DC Power Supply Ta b l e A-5 lists the specifications for each 930 W DC power supply (Cisco par[...]

B-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX B Power Cord Specifications This appendix pro vides supp orted pow er cable specif ications. Supported Power Cords and Plugs Each po wer supply has a sep arate po wer cord. Standa rd po wer cords or jumper po wer cords are a vailable for connection to the server . The ju[...]

B-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs CAB-9K10A- IT  Pow er Cord, 250 V A C 10 A CEI 23-16 Plug  Italy 8.2 2.5 Figure B-7 CAB-9K10A- SW  Pow er Cord, 250 V A C 10 A MP232 Plug  Switzerland 8.2 2.5 Figure B-8 CAB-9K10A- UK  Pow er Cord,[...]

B-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs AC Power Cord Illustrations This section includes the A C po wer cord illustrations. See Figure B-1 through Figure B-15 . Figur e B-1 SFS-250V -1 0A -A R Figur e B-2 CAB-9K1 0A -A U Figur e B-3 SFS-250V -1 0A -[...]

B-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figur e B-4 CAB-9K1 0A -EU Figur e B-5 SFS-250V -1 0A -ID Figur e B-6 SFS-250V -1 0A -IS Connector : VSCC15 Cordset rating: 10A/16 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: M2511 1 8 6576 OVE Cordset rating 16A, [...]

B-5 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-7 CAB-9K1 0A -IT Figur e B-8 CAB-9K1 0A -SW Figur e B-9 CAB-9K1 0A -UK Plug: I/ 3 G (CEI 2 3 -16) Connector C15M (EN60 3 20/C15 ) Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) 1 8 6575 Plug: [...]

B-6 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figur e B-1 0 CAB-AC-250V/13A Figur e B-1 1 CAB-N5K6A -NA Figur e B-12 CAB-9K12A -NA Cordset rating 1 3 A, 250V (6.6 f eet) (79±2m) Plug: EL 3 12MoldedT wistlock (NEMA L6-20) 1 8 656 8 Connector : EL 701 (IEC60 [...]

B-7 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-13 CAB-C13-CBN, Jumper P ow er Cor d (0.68 m) Figur e B-14 CAB-C13-C14-2M, Jump er Power Co rd ( 2 m) Figur e B-15 CAB-C13-C14-AC, Jumper P ower Cor d (3 m) Cordset rating 10A, 250V (6 8 6mm) Plug: SS[...]

B-8 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs[...]

C-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX C RAID Controller Considerations This appendix contain s the follo wing sections: • Supported RAID Cont rollers and Required Cabl es, page C-2 • RAID Controller Migration, page C-6 • Factory- Default Option R OM Settings, page C-5 • Mixing Dri v e T ypes in RAID [...]

C-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Supported RAID Cont rollers and Required Cab les Supported RAID Controllers and Required Cables This server supp orts the RAID controller opti ons and cable requirements sh own in Ta b l e C-1 for small form factor d riv es and Ta b l e C-[...]

C-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Supported RAID Controlle rs and Required Cables Ta b l e C-2 Cisco UCS C220 M3 Larg e For m Fact or Dr ives RAID Options Controller Style Maximum Driv es SCPM 1 1. SCPM = SuperCap power module (RAID backup unit). See RAID Backup Units, pa[...]

C-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Mixing Drive Types in RAID Groups Mixing Drive Types in RAID Groups Ta b l e C-3 lists the technical capabili ties for mixing hard disk dri v e (HDD) and solid stat e dri ve (SSD) types in a RAID group. Ho we v er , see the best pr actices[...]

C-5 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Factory-Default Option ROM Settings Factory-Default Option ROM Settings Ta b l e C-4 describes the option ROM (OPROM) set tings for card slots that are made a t the factory for various conf igurations. The version of the server and the nu[...]

C-6 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Migration RAID Controller Migration This server supports hardware RA ID (mezzanine and PCIe controller card s) and embedded software RAID. See Ta b l e C-5 for which migrations are allow ed and a summary of migration steps.[...]

C-7 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Embedded MegaRAID Controller Note VMware ESX/ESXi or any other virtualized environments are not supported fo r use with the embedded MegaRAID controller . Hypervisors such as Hyp er-V , Xen, or KVM are also n [...]

C-8 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Notes on Supported Embedded MegaRAID Levels The follo wing RAID le v els are supported b y the embedded Mega RAID controller . • RAID 0—Y ou can confi gure a RAID 0 virtual dri ve (VD) using one or more phy[...]

C-9 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing a SCU Upgrade ROM Modu le For Embedded RAID SAS Support The SCU Upgrade R OM module contains a chip on a small circuit board . This module attaches to a motherboard header . T his chip upgr ades the[...]

C-10 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing a Software RAID Key Module for Embedded RAID 5 Support The software RAID key module cont ains a chip on a small c ircuit bo ard. This module attaches to a motherboard header . This chip upgrades SAS[...]

C-11 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Disabling the Embedded RAID Controller in the BIOS Caution Data migr ation from SW RAID to HW RAID is not supported and could result in data loss. Migrations from SW RAID to HW RAID are supported onl y befor [...]

C-12 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Downloading the LSI MegaSR Drivers The MegaSR dri vers are included in the C-series driv er ISO for your serv er and OS. Do wnload the driv ers from Cisco.com: Step 1 Find the dri ver s ISO file d ownlo ad for[...]

C-13 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Step 4 Start the W indows dri ver install ation using one of the follo wing methods: • T o install from lo cal media: Connect an e xternal USB D VD dr iv e to the serv er and then insert the first W indows [...]

C-14 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Linux Driver Installation This section e xplains the st eps to install the embedded Me gaRAID de vice d riv er in a Red Hat Enterprise Linux installation o r a SuSE Linux Enterprise Serv er installation. This [...]

C-15 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Step 5 Open the DOS Command Prompt and na vigate to the director y where ra w write.ex e is located. Step 6 T ype the follo wing co mmand to create the installation disk ette: raw wri te Step 7 Press Enter . [...]

C-16 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing the Red Hat Linux Driver For the specif ic supported OS versions, see the Hardware and Software Interoperability Matrix for your server release. This section describes the fresh i nstallation of the[...]

C-17 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Note The noprobe v alues depend on the number of dri v es . For exam ple, t o in stall R HEL 5.7 on a RAID 5 conf iguration with three dri ves, enter:  Linux dd blacklist=isci blacklist=ahci nopr obe=ata1 [...]

C-18 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller • T o install from lo cal media: Connect an e xternal USB D VD driv e to the serv er and then insert the first RHEL i nstall disc into the dri ve. Skip to Step 6 . • T o install from remot e ISO: Log in to[...]

C-19 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling RAID Controller Cabling This section includes the following topics: • Cable Routing, page C-19 • Cisco UCS C220 Server Cabling, page C-20 Cable Routing The RAID controll er connectors in this server are sho wn[...]

C-20 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling Cisco UCS C220 Server Cabling This section contains the following topics: • Backplane and Expander Options, page C-20 • SFF 8-Dri ve Backplane Cabling, page C-20 • LFF 4-Dri ve Back plane Cabling, page C-22 B[...]

C-21 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling Mezzanine-Style Card This option can co ntrol up to eight d riv es. The required UCSC-CABLE1 cable kit has tw o mini-SAS cables. Cable 1 control s dri ves 1–4 and cable 2 controls dri v es 5–8. Step 1 Connect [...]

C-22 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling LFF 4-Drive Backplane Cabling The cable connections required for each t ype of controller ar e as follo ws: Embedded RAID This option can co ntrol up to four d riv es. The required UCSC-CABLE3 cable kit has two min[...]

C-23 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Restoring RAID Configuration Af ter Replacing a RAID Controller Restoring RAID Configuration After Replacing a RAID Controller When you replace a RAID controller, the RAID co nfigu ration that is stored in the controller is lost. Use the[...]

C-24 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations For More Information • LSI SAS2 Integrated RAID Soluti on User Gui de (for LSI SAS 2008) http://www .cisco.com /en/US/docs/un ified_computing/ucs/3rd-party/lsi/ irsas/userguide/LSI_IR_SAS_UG.pdf[...]

D-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX D Installation for Cisco UCS Integration The Cisco UCS integratio n instructions ha ve been mov ed to the integratio n guides found here: Cisco UCS C-Series Server I nte gration wit h UCS Manager Guides Refer to the guide that is for the versio n of Cisco UCS Manager tha[...]

D-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix D Installati on for Cisco UCS Integration[...]