Cisco Cisco Wide Area Application Engine 612 manual

Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco Wide Area Application Engine 51 2 and 61 2 Hardw are Installation Guide Text Part Number: OL-9137-02[...]

THE SPECIFICA TIONS AND INFORMA TION REGA RDING THE PR ODUCT S IN THIS M ANUAL ARE SUBJECT TO CHANGE WIT HOUT NO TICE. ALL ST A TEMENTS, INFORMA TION, AND RECOMMEND A TION S IN THIS MANUAL ARE BELIEVED TO BE A CCURA TE BUT ARE PRESENTE D WITHOUT W ARRANTY OF ANY KIND, EXPRESS O R IMPLIED. USERS MUST T AKE FU LL RESPONSIBILI TY FOR THEIR APPLICA TIO[...]

iii Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 CONTENTS Preface vii Purpose vii Audience viii Organization viii Conventi ons ix Related Documentation xi Obtaining Documentation xiii Cisco.com xiii Product Documentation DVD xiii Ordering Documentation xiv Documentation Feedb ack xiv Cisco Product Secu rit[...]

Contents iv Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 ACNS Software Description 1-5 WAFS Software Description 1-6 Hardware Features 1-6 Front Panel Control Button s 1-7 LED Indicators 1-7 Input/Output Ports and Conn ectors 1-10 Ethernet Port Connector 1-11 Serial Port Connector 1-12 Video Port Connector[...]

v Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Contents Connecting Ca bles 3-13 Connecting Powe r and Booting the System 3-15 Checking the LEDs 3-15 Removing or Replacing a Cisco Wide Area Application Engine 3-15 CHAPTER 4 Installing Hardware Options 4-1 Removing the Cov er and Bezel 4-1 Installing Adapter[...]

Contents vi Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Corrosion C-4 Electrostatic Discharge C-4 Electromagnetic and Ra dio Frequency Interference C-4 Magnetism C-5 Power Source In terruptions C-6 Using Power Protection Devices C-7 Surge Protectors C-7 Line Conditioners C-7 Uninterruptible Power Supplies[...]

vii Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Preface This preface describes the purpose of the Cisco W ide Ar ea Application Engin e 512 and 612 Har dwar e Installation Guide , who sh ould read it, ho w it is organ ized, and its document con ventions. This preface contains the follo wing sections: • [...]

Preface Audien ce viii Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 installation procedures co vered in th is guide, you will then use the appropriate companion publi cations to co nfigure your system. (See the “Related Documentation” section o n page xi .) Audience T o use this installation guid e, yo[...]

ix Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Preface Conventions Conventions Command descriptions use the fo llowing co n ventions: Convention Description boldface font Commands and ke ywords are in boldface . italic font V ariables for which you supply v alues are in italics . [ ] Elements in square br[...]

Prefac e Conventi ons x Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Screen examples use the follo wing con ventions: Convention Description screen font T ermina l sessions and information the system displays are in screen font. boldface scr een font Informatio n you must enter is in b oldface screen font.[...]

War n i ng IMPORT ANT SAFETY INSTRUCTIO NS This warning symb ol means danger . Y ou are in a situation that co uld cause bodily injury . Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accid ents. Use the statement number provided at the end of each [...]

Preface Related Documentation xii Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 The W AFS software document set includes th e follow ing documents: • Release Notes for Cisco W AFS • Cisco W AFS 3.0 Quic k Installation Guide • Cisco W AFS 3.0 Conf iguration G uide • Cisco W AFS 3.0 Command Refer ence[...]

xiii Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Preface Obtaining Documentation Obtaining Documentation Cisco documentation and additional literatu re are av ailable on Cisco.com. C isco also provi des several w ays to obtain technical assistance and other technical resources. These sec tions explain how[...]

Preface Documentation Feedback xiv Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Cisco Ordering tool: http://www .cisco.com/en/US/ partner/ordering/ Cisco Marketplace: http://www .cisco.com/go/mark etplace/ Ordering Documentation Begi nning June 30, 2005, re gistered Cisco. com users may order Cisco documen[...]

xv Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Preface Cisco Product Secu rity Overview Y ou can submit comments b y using the response card (if present) behind t he front cov er of your document or b y writing to the foll owing address: Cisco Systems Attn: Customer Document Or dering 170 W est T asman Dr[...]

Preface Obtaining Technic al Assistance xvi Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Reporting Security Problems in Cisco Products Cisco is committed to deli verin g secure pr oducts. W e test our products internally before we release them, and we strive to correct all vulnerabilities quickly . If you [...]

xvii Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Preface Obtaining Technical Assistance service contract, Cisco T echnical Assistance Center (T A C) engineers provide telephone suppor t. If you do not ha ve a v alid Cisco service contract, contact y our reseller . Cisco Technical Support & Documentati[...]

Preface Obtaining Technic al Assistance xviii Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 solutions. If your issue is not resolv ed using the recommended resources, your service request is assigned to a Cisco engineer . The T A C Service Reques t T ool is located a t this URL: http://ww w .cisco. com/tech[...]

xix Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Preface Obtaining Additional Pub lications and Information Obtaining Additional Publications and Information Information about Cisco products, technol ogies, and network so lutions is a vailabl e from variou s online and printed sources. • Cisco Market pla[...]

Preface Obtaining Additional Publ ications and Information xx Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 • W orld-class networking train ing is av ailable from Cisco. Y ou can view current of ferings at this URL: http://www .cisco.com/en/ US/learning/inde x.html[...]

1-1 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 C HAPTER 1 Introducing the Cisco Wide Area Application Engine This chapter pro vides a basic functional o vervie w of the Cisco W ide Area Application Eng ine 512 and 612 (W AE-512 and W AE-6 12), and describes the hardware, major components, and fron t a nd[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Introduction 1-2 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 When W AAS software is installed, the W AE appliance can function as either a Central Manager or as an Application A cceleration Engine. When A CNS software is installed, the W AE a[...]

1-3 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Introduction Figur e 1- 2 W A E - 6 1 2 — F r o n t V i e w 151920 C isco W AE 500 Se rie s The W AE-512 and W AE-612 are config ured for A C-input po wer and hav e a single A C-input po wer sup[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Software Func tional D escription 1-4 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Figur e 1 -3 W AE-512 and W AE-612 Back P anel 115921 Software Functional Description The operation of the W AE is dependent on the software application that is[...]

1-5 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Software Func tional Descript ion • Migrate a pplication an d file se rvers from branch of fi c es into centrally managed data centers. • Minimize unnecessary W AN bandwidt h consumption throu[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Hardware Fe atures 1-6 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 T o deploy Cisco Conten t Engines with Cisco A CNS software with in your existing network , your network must support Cisco IOS softw a re and the W eb Cache Communication Pro[...]

1-7 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Hardware Features Front Panel Control Buttons Figure 1-4 sho ws the W AE front panel, and Ta b l e 1-1 describes the front panel control b uttons. Figur e 1 -4 F ront P anel Contr ol Butt ons 1519[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Hardwar e Features 1-8 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Figur e 1 -5 F ront P anel LEDs 151923 5 3 2 1 4 1 Po wer on 2 Hard disk dri ve activity 3 System locator ( not supported on Conten t Engine models) 4 System error 5 CD-R OM d[...]

1-9 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Hardware Features Figur e 1 -6 Back P anel LEDs 2 1 3 4 151924 1 Ethernet 1 transmit receiv e activity 2 Ethernet 1 speed 3 Ethernet 2 transmit receiv e activity 4 Ethernet 2 speed Ta b l e 1- 3 B[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Hardwar e Features 1-10 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Input/Output Ports and Connectors Y ou r W AE appli ance supports the follo wing I/O connectors on the back of the device: • Ethernet connectors • Serial connector • V [...]

1-11 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Hardware Features Note The system software does n ot support the use of a keybo a rd or mouse (Personal System 2 [PS/2] or Uni versal Serial Bus [USB] ). The BIOS does support a ke yboard and a m[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Hardwar e Features 1-12 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Ethernet Port Connector The W AE appliance comes with one integrat ed dual-port Ethern et controller . This controller provides an interf ace for connecting to 10-Mbps, 100-M[...]

1-13 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Hardware Features Figur e 1 -9 Ser ial P ort Connector 1 5 69 83193 Video Port Connectors The W AE-512 and W AE-612 support one o ptional MPEG A/V decoder adapter that has one audio an d video in[...]

Ta b l e 1 -5 A udio Output Conn ector Pinout Pin Number Destination 1 Audio left ( –) 2 Ground 3 Audio left ( + ) 4 Audio righ t (+) 5 Ground 6 Audio left ( –) 7 Ground 8 S/PDIF Ta b l e 1 -6 V GA Output Connect or Pinout Pin Number Destination 1 Vsync 2 Ground 3 Hsync 4 Blue 5 Ground 6 Red 7 Green 8 Ground Chapter 1 Introd ucing the Cisco Wid[...]

1-15 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Hardware Features • Installation Scenarios and Cabling Exam ples for Fast Ethernet Connections For adapter specif ic ations, see Ta b l e A-4 in Appendix A. Form and Function Y our appliance su[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Hardwar e Features 1-16 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 InlineGroup interf aces are numbered using t he format slot/group. The slot number is the slot in which the adapter is insert ed. (In the W A E 500 series and 60 0 series app[...]

0 Port 0; Group 1 W AN interface 1 Port 1; Group 1 LAN i nterface 2 Port 2; Group 0 W AN interface 3 Port 3: Group 0 LAN i nterface 1-17 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Hardware Features The inline netwo rk adapter has three LEDs th[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Hardwar e Features 1-18 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 If you are connecting a W AE inline appl iance between two de vices using Gig a bit Ethernet, you can use either straight-through cables, crossov er cables, or an y combinati[...]

1-19 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Hardware Features instructions for the inline network adapter to work properly . (See Ta b l e 1-9 . For illustrations and examples, see the “Insta llation Scenarios and Cabling Examples for Fa[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Hardware Fe atures 1-20 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Step 2 Connect Fast Ethern et ports on bot h the LAN and th e W AN sides of the W A E inline appl iance by using the follo wing cable ty pes: • On the LAN side of the conne[...]

1-21 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wi de Area Application Engine Hardware Features If you are connecting a W AE inline appl iance between two de vices using Gigab it Ethernet, you can use either straight-through cables, crosso ver cables, or an y combination o[...]

Chapter 1 Introd ucing the Cisco Wid e Area Applicatio n Engine Hardwar e Features 1-22 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Figur e 1 -13 Cablin g for a Single In line W AE with Redundant W AN Connections MGMT 240087 WAE WAN WAN Router A Router B LAN s witch 1 4 5 2 3 1 Connection: Management Giga[...]

1 Connection: W AE 1 to LAN switch Fast Et hernet: LAN0 (InlinePort 1/0/lan) Cable type : Straight-through 2 Connection: W AE 1 to W AE 2 Fast Ethernet: W AE1 W AN0 (InlinePort 1/0/wa n) to W AE 2 LAN0 (InlinePort 1 /0/lan) Cable ty pe: Cr ossover 3 Connection: W AE 2 to W AN router Fast E th er ne t: W A E 2 W AN 0 (InlinePort 1/0/wan) Cable ty pe[...]

1 Connection: W AE 1 to LAN switch Fast E th er ne t: W A E 1 LA N0 (InlinePort 1/0/lan ) Cable type : Straight-through 2 Connection: W AE 1 to W AE 2 Fast E th er ne t: W A E 1 W A N0 (InlinePort 1 /0/wan) to W AE 2 LAN0 (InlinePort 1 /0/lan) Cable ty pe: Cr ossover 3 Connection: W AE 2 to W AN router Fast E th er ne t: W A E 2 W AN 0 (InlinePort [...]

2-1 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 C HAPTER 2 Preparing to Instal l the Cisco Wide Area Application Engine This chapter con tains important safety information you shou ld know before working with the W ide Area Application Engine (W AE). Use the guidelines in this chapter to ensure you r own [...]

Chapter 2 Preparing to Install the Cisco Wide Area Ap plication Engine Safety Warnings 2-2 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 War n i ng Before working on a cha ssis or working near power supplies, unplug th e power cord on AC units. Statement 246 War n i ng Do not work on the sy stem or connect [...]

2-3 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 2 Preparing to Install the Cisco Wid e Area Application En gine Safety Warni n gs War n i ng This unit is intended for installation in restricted access areas. A restricte d access area can b e accessed only through the use of a special tool, lock an[...]

Chapter 2 Preparing to Install the Cisco Wide Area Ap plication E ngine Safety Guidelines 2-4 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 War n i ng This product requ ires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national [...]

2-5 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 2 Preparing to Install the Cisco Wid e Area Application En gine Safety Guidelines – The product has been dropped or d amaged. – The product does not operate correc tly when you follo w the operating instruction s. • K eep your system components[...]

Chapter 2 Preparing to Install the Cisco Wide Area Ap plication E ngine Safety Guidelines 2-6 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 • Position cables and power cords carefully ; route cables and the po we r cord and plug so that the y cannot be stepped on or tri pped over . Be sure that nothing re[...]

2-7 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 2 Preparing to Install the Cisco Wid e Area Application En gine Safety Guidelines • Do not ex tend more than one de vice out of the rack at the same time. • Remove the rack doors and si de panels to p rovide easier acce ss during installa tion. ?[...]

Chapter 2 Preparing to Install the Cisco Wide Area Ap plication E ngine Safety Guidelines 2-8 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02[...]

3-1 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 C HAPTER 3 Installing the Cisco Wide Area Application Engine This chapter e xplains ho w to install th e Ci sco W ide Area Application Engine (W AE) 512 and W AE 612 into an equipment rack. It also pr ovides general instructions for installing the de vice on[...]

Chapter 3 Installing the Cisco Wide Area Ap plication E ngine Tools and Parts Required 3-2 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Tools and Parts Required A sliding rail rack-moun t kit and cable management assembly is included in your shipping contai ner accessory box. The rack-mount kit is suitable[...]

War n i ng T o prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the sy stem remains stable. The following guidelines are provided to ensure your safety: • This unit should be mounted at the bo ttom of the rack if it is the only unit in the rack. • When mounting this unit in a[...]

Chapter 3 Installing the Cisco Wide Area Ap plication Engine Installing the Cisco Wide Area Application Eng ine 3-4 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 T o install the cha ssis in a two-post rack, follo w these steps : Step 1 Attach a bracket to one side of the chassis, aligning the front flange o[...]

3-5 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 3 Installing the Cisco Wide Area Application Engine Installing the Cisco Wide Area Application Engine Figur e 3-3 Rack-Mount Installation Kit Rear of rail F ront of rail 4 1 2 3 134402 1 Slide rails (2) 2 Shipping brack et 3 M6 scre ws (6) 4 Cable st[...]

Chapter 3 Installing the Cisco Wide Area Ap plication Engine Installing the Cisco Wide Area Application Eng ine 3-6 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 • On the rear of the rail, press on the tw o rear tabs, and slide th e pin carriage to ward the front of the rail, releasing the latch ta b as i[...]

3-7 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 3 Installing the Cisco Wide Area Application Engine Installing the Cisco Wide Area Application Engine Note Ensure that the pins are fully extended through the mounting flange and slide rail pin bracket. (See Figure 3-5 .) Figur e 3-5 At taching the S[...]

Chapter 3 Installing the Cisco Wide Area Ap plication Engine Installing the Cisco Wide Area Application Eng ine 3-8 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Figur e 3-6 At taching the Sl ide Rail to the Fr ont Mounting Flange—Left Fr ont Rail Shown Pins e xtended through the mounting flange and slide[...]

3-9 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 3 Installing the Cisco Wide Area Application Engine Installing the Cisco Wide Area Application Engine Figur e 3-7 Inserting the Chassi s ont o the Slide Rails 134406 2 1 1 Capti ve thumbscre ws 2 Shipping brack ets Step 7 T o remove t he shipping bra[...]

Chapter 3 Installing the Cisco Wide Area Ap plication Engine Installing the Cisco Wide Area Application Eng ine 3-10 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Figur e 3-8 Remo ving the Shipping Br ack et TO REMO VE BRACKET , PUSH HERE AND SLIDE FOR SHIPPING PURPOSES ONL Y 1 134407 1 Release tab Step 8 A[...]

3-11 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 3 Installing the Cisco Wide Area Application Engine Installing the Cisco Wide Area Application Engine Note Leav e enough slack in the cab les to allow for slid ing the devi ce in or out of the rack. Step 9 T o transport the rack to another location [...]

Chapter 3 Installing the Cisco Wide Area Ap plication Engine Installing the Cisco Wide Area Application Eng ine 3-12 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Note The four -post rack-mounting system is designed f or racks that do not hav e pre-thr eaded holes. If you ar e using an equipme nt rack with [...]

3-13 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 3 Installing the Cisco Wide Area Application Engine Connecting Cables T o install the chassi s on a workbench or tabletop, follo w these steps: Step 1 Remov e any debris and dust from the tabletop or w orkbench, as well as from the surrounding area.[...]

Chapter 3 Installing the Cisco Wide Area Ap plication Engine Connecting Cables 3-14 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Figur e 3-12 W AE-512 and W AE-612 Back P anel Connectors and Receptacles 5 6 7 8 9 4 3 1 2 151925 1 A C po wer receptacl e 2 Mouse connector 1. Not required for normal operation[...]

3-15 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 3 Installing the Cisco Wide Area Application Engine Connecting Power and Booting the System Connecting Power and Booting the System T o connect power to the de vice , follow these steps: Step 1 Re view the in formation in the “Safety W arnings” [...]

Chapter 3 Installing the Cisco Wide Area Ap plication E ngine Removin g or Replacing a Cisco Wi de Area Application Engine 3-16 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 War n i ng Ultimate disposal of this product should be handled acco rding to all national laws and regulations. Statement 1040 T o rem[...]

4-1 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 C HAPTER 4 Installing Hardware Options This chapter p rovides basic instructio ns for installing hardw are options in the W ide Area Application Engine (W AE). These instructions are intended for experienced technicians. This chapter contains the follo wing [...]

Chapter 4 Insta lling Hardwa re Options Removing the Cover and Bezel 4-2 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Step 3 Press the cov er release butt on. (See Figure 4-1 .) Figur e 4-1 Removing the Co ver 151926 Cis co W AE 5 00 Serie s 1 1 Cov er release button Step 4 While holding th e cove r releas[...]

4-3 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 4 Installing Hardwa re Opti ons Installing Adapters Installing Adapters This section pro vides general information abou t the system board, riser card, adapters, and PCI-X sl ot configurat ion sp ecifications. Use these instructions to install an y f[...]

Chapter 4 Insta lling Hardwa re Options Installing Adapters 4-4 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Step 3 Disconnect the power cord and then all e xternal ca bles from the de vice . Step 4 Remov e the device cov er . Step 5 Grasp the riser card at the rear edge and lift to remov e the riser card [...]

4-5 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 4 Installing Hardwa re Opti ons Installing Adapters Figur e 4-3 Installing the A dapter in the Riser Car d Assembly 151928 1 2 3 4 5 6 7 1 Expansio n slot br acket 2 Adapter 3 Adapter suppor t bracket 4 PCI-X e xpansion slot 1 5 Riser card a ssembly [...]

Chapter 4 Insta lling Hardwa re Options Installing DIMMs 4-6 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Step 8 T ouch the static -protecti ve pa ckage that contains the adapter to any unpainted metal surface on the device, an d then remov e the adapter from the static-protecti ve package. A void touching[...]

4-7 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 4 Installing Hardwa re Opti ons Installing DIM Ms • Memory modules are installe d on the sy stem board in the DIMM connectors sho wn in Fi gur e 4-4 . Devi ces with a single DIMM should ha ve the module installed in DIMM connect or 1. Install the n[...]

Chapter 4 Insta lling Hardwa re Options Installing DIMMs 4-8 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Caution When you handle static-sensiti ve de vices, tak e precautions to a void damage from static electricity . T o install a DIMM, fol low these steps: Step 1 Re view the safety i nformation in the ?[...]

4-9 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 4 Installing Hardwa re Opti ons Working with Hard Disk Drives Caution T o av oid breaking the retaining clips or damaging the DIMM connectors, open and close the clips gently . b. Insert the DIMM into the connector by aligning the DIMM edges with the[...]

Chapter 4 Insta lling Hardwa re Options Working with Hard Disk Drives 4-10 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 • All hard disk dri ves bein g used in the W AE should ha ve the same throu ghput speed rating. Mixing hard di sk driv es with dif ferent speed ratings will cau se all hard disk dri ves[...]

4-11 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 4 Installing Hardwa re Opti ons Working with Hard Disk Drives Note Figure 4-6 shows that disk00 is be ing inserted i nto the l eft driv e bay i n the W AE-512. Step 8 If you ha ve other o ptions to install, do so no w; otherwise, go to the “C ompl[...]

Chapter 4 Insta lling Hardwa re Options Working with Hard Disk Drives 4-12 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Installing an SAS Hard Disk Drive Note The W AE-612 hardware suppo rts hot-swappable SAS h a rd disk dri ves; howe ver , you must be running W AAS 4.0.13 or a later version to obtain the [...]

4-13 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 4 Installing Hardwa re Opti ons Working with Hard Disk Drives Figur e 4-7 Installing a SAS Har d Disk in the W AE-612—Disk0 1 is Shown 151931 1 2 1 Dri ve handle (in o pen position) 2 SAS driv e and tray assembly Step 6 Close the dri ve tray handl[...]

Chapter 4 Insta lling Hardwa re Options Completing the Installation 4-14 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 Completing the Installation Caution T o maintain proper cooling and airflo w , install the co ver before turning on t he device. Operating the de vice for extend ed periods (o ver 30 minute[...]

4-15 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Chapter 4 Installing Hardwa re Opti ons Completing the Installation Step 3 Connect all external cables and the po wer cord to the device, and then plug the po wer cord into a proper ly grounded electrical outlet.[...]

Chapter 4 Insta lling Hardwa re Options Completing the Installation 4-16 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02[...]

A-1 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 APPENDIX A Technical Specifications This appendix describes the W AE models listed here: Model Product Number W ide Area Ap plication Engine 51 2 W AE-512-K9 W ide Area Ap plication Engine 61 2 W AE-612-K9 This appendix con tains the follo wing sections: •[...]

Appendix A Technical Sp ecifications Appliance Specifications A-2 Cisco Wide Area Application Engine 5 12 and 612 Hardware In stallation Guide OL-9137-02 Ta b l e A -1 Appliance Feat ures and Specifications Specification Description Microprocessor • W AE-512—One Intel Pentium 4, 3. 0-GHz processor 531, 800-MHz FSB 1 , 1-MB le vel-2 cache • W [...]

A-3 Cisco Wide Area Ap plication Engine 512 and 612 Hardwa re In stallation Guide OL-9137-02 Appendix A Technical Sp ecifications Appliance Specifications Dimension s • Height: 1.75 in ., 1 R U (43 mm) • Depth: 22 in. (559 mm) • W idth: 17.32 i n. (440 mm) W eight Maximu m weight : 28 lb (12.7 kg) depe nding on y our configuration Electrical [...]

Appendix A Technical Sp ecifications Adapter Specifications A-4 Cisco Wide Area Application Engine 5 12 and 612 Hardware In stallation Guide OL-9137-02 Adapter Specifications Ta b l e A-2 describes the Fibre Channel adapter specifications. Ta b l e A -2 Fibr e Channel A dapter Specif ications Fibre Channel adapter • Bus type: Fiber -optic media ([...]

Ta b l e A -3 MPEG A/V Decoder Ad apter Specifications MPEG A/ V decoder adapter V ideo specificat ions • 1 10 kHz to 4.2 MHz; Y : 65 dB rms 1. S/N = signal-to-noise ratio S/N: 2 ; Pb: 70 dB rms; Pr: 70 dB rms 2. rms = root mean square • Frequency response: 0 to 4.0 MHz ± 2 d B • Sync tip: 40 IRE 3 ± 4 3. IRE = Institute of Radio Engineers [...]

Ta b l e A -4 Inline Networ k Adapte r Specifica tions Specification Description Copper Gigabit Et hernet Specification s IEEE standard Gigabit Ethernet , 1000B ASE-T Fast Ether net, 100B ASE-T Ethernet, 10B ASE-T Full duple x and half duple x Supports both hal f-duplex and full -duplex operat ion in all operating speeds Autone gotiation Autone got[...]

B-1 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 APPENDIX B Troubleshooting the System Hardware If your system is not w orking as expected, b egin troubleshooting u sing the procedures in this appendix. This a ppendix guides you through so me initial checks and procedures that can solve basic system proble[...]

Appendix B Troubleshooting th e System Hardware Checking Co nnections and Switches B-2 Cisco Wide Area Application Engine 5 12 and 612 Hardware In stallation Guide OL-9137-02 If the chassis wa s dropped or damaged while be ing mov ed, you should ch eck the system to see if it functions prop erly . If an external de vice attached to the system is dr[...]

B-3 Cisco Wide Area Ap plication Engine 512 and 612 Hardwa re In stallation Guide OL-9137-02 Appendix B Troubleshoo ting the System Hardwa re Checking Connections and Sw itches T o check a ll the connections an d switches, follo w these steps: Step 1 Po wer down the system, including an y at tached peripherals such as external dri ves. Disconnect a[...]

Appendix B Troubleshooting th e System Hardware Checking Co nnections and Switches B-4 Cisco Wide Area Application Engine 5 12 and 612 Hardware In stallation Guide OL-9137-02[...]

C-1 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 APPENDIX C Maintaining the Cisco Wide Area Application Engine Proper use of pre venti ve mai ntenance procedures can keep your system i n good operating condition and minimize the need for co stly , time-consuming service procedures. This append ix contains [...]

Appendix C Maintaining the Cisc o Wide Area Application E ngine Maintaining Your Site Envir onment C-2 Cisco Wide Area Application Engine 5 12 and 612 Hardware In stallation Guide OL-9137-02 Temperature T e mperature extremes can cause a v ariety of problems, includin g premature aging and failure of chi ps or mechanical failure of de vices. Extrem[...]

C-3 Cisco Wide Area Ap plication Engine 512 and 612 Hardwa re In stallation Guide OL-9137-02 Appendix C Maintaining the Cisco W i de Area A pplication Engine Maintaining Your Site En vironment Humidity High-humidity condi tions can cause moisture migration and penetration i nto the system. This moistur e can cause corrosion of internal co mponents [...]

Appendix C Maintaining the Cisc o Wide Area Application E ngine Maintaining Your Site Envir onment C-4 Cisco Wide Area Application Engine 5 12 and 612 Hardware In stallation Guide OL-9137-02 Corrosion The oil from a person’ s f ingers or prolonged e xposure to high temperature o r humidity can co rrode the gold-plated ed ge connectors and p in co[...]

C-5 Cisco Wide Area Ap plication Engine 512 and 612 Hardwa re In stallation Guide OL-9137-02 Appendix C Maintaining the Cisco W i de Area A pplication Engine Maintaining Your Site En vironment interfere with cordless and l ow-po we r telephones. Con versely , RFI from high-po wer telephones can cause spurious characters to appear on the system’ s[...]

Appendix C Maintaining the Cisc o Wide Area Application E ngine Maintaining Your Site Envir onment C-6 Cisco Wide Area Application Engine 5 12 and 612 Hardware In stallation Guide OL-9137-02 Power Source Interruptions Systems are especially sen sitiv e to variat ions in voltage suppli ed by the A C power source. Ov ervoltage, underv oltage, and tra[...]

C-7 Cisco Wide Area Ap plication Engine 512 and 612 Hardwa re In stallation Guide OL-9137-02 Appendix C Maintaining the Cisco W i de Area A pplication Engine Using Power Protection Devices Using Power Protection Devices A number of de vices are a vailable t hat protect against po wer problems such as power sur ges, tran sients, and p ower f ail ure[...]

Appendix C Maintaining the Cisc o Wide Area Application E ngine Using Power Prote ction Devices C-8 Cisco Wide Area Application Engine 5 12 and 612 Hardware In stallation Guide OL-9137-02 UPS systems range in price from a fe w hundred doll ars to se veral thousand dollars, with th e more expensi ve units allo wing you to run lar ger systems for a l[...]

IN-1 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 INDE X A A/V ports description 1-11 ACNS software Content Engine mode 1-5 AC power receptacle 1-11 AC power co rds connecting 3-15 adapters description A-2 inline 1-14 installin g 4-3 altitude guidel ines C-3 specifications A-4 B back panel LEDs (figure) 1-[...]

Index IN-2 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 console connecting to port 3-13 control buttons front panel 1-7 corrosion preventing damage C-4 covers installin g 4-15 removing 4-1 D dimensions WAE A-3 DIMMs considerations 4-6 installin g 4-6 disk drives. Se e hard disk drives dust preventing damag[...]

IN-3 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Index figure 1-7 LEDs (figure) 1-8 LEDs (table) 1-8 functional descri ption WAE 1-4 H hard disk control lers description A-2 hard disk drive LED description 1-8 hard disk drives description A-2 SAS 4-10 SATA 4-10 hardware troubleshooti ng B-1 heat dissipa t[...]

Index IN-4 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 M magnetism preventing effects of C-5 maintenance C-1 to C-6 memory module installin g 4-6 order of instal lation 4-7 memory specifications for WAE-512 A-2 for WAE-612 A-2 microprocessor description A-2 MPEG A/V decoder adapter connectors 1-11, 1-13 i[...]

IN-5 Cisco Wide Area Appli cation Engine 512 and 612 Hard ware Installation Guide OL-9137-02 Index contents of 3-5 radio frequency interf erence. See RFI receptacles power 1-11 reset button description 1-7 RFI preventing effects of C-4 S safety genera l precaut ions 2-4 safety warnings 2-1 SATA 4-10 Serial Attached SCSI hard disk drives 4-10 serial[...]

Index IN-6 Cisco Wide Area Application Engine 512 and 612 Hardware In st allation Guide OL-9137-02 connectors (figure) 1-13 description 1-11 W WAAS softwar e description 1-4 WAE back panel 1-10 front panel 1-7 installin g in a 2-pos t rack 3-3 installin g in a 4-pos t rack 3-4 installing on a tabletop 3-12 maintaining C-1 WAE-512 memory specificati[...]