Clifford intellivoice IQ Vechicle Security manual

Owner' s Manua l World-Clas s Aut o Securit y T M intellivoic e I Q[...]

Table of Contents Standard Features of the IntelliVoice-IQ . . . . . . . . . . . . . . . . . . . . . . . . . 2 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . . . . . . . . . . . 7 How to use your keychain remote control . . . . . . [...]

Standard Features of the IntelliVoice- IQ ✔ Limited Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace control unit and remote controls free of charge (see card). ✔ FA CT™ — F alse A larm C ontrol and T est —One of many Clifford innovations, FA CT absolutely, positively puts an end to recurring false[...]

Standard Features of the IntelliVoice- IQ (cont.) ✔ Remote Override of Each Sensor Zone — A press of a button on your remote overrides the Proximity Sensor ’s outer warning zone if you must park in an area with heavy pedestrian traffic. Another press overrides both zones if you need to leave a passenger or pet in your vehicle. ✔ Full-Time R[...]

Standard Features of the IntelliVoice- IQ (cont.) ✔ Patented Malfunction AutoBypass™ — Automatically bypasses any malfunction, then arms all other points to continue to provide the utmost possible protection. if you simply left the hood, trunk or a door open when you armed, just close it and the system will again monitor that trigger point. ?[...]

Standard Features of the IntelliVoice- IQ (cont.) ✔ Remote Window/Sunroof Closure Capability — On some vehicles, the system ’s integrated timer and an optional relay can be set to remotely close the power windows/sunroof every time you remotely arm. ✔ Remote Headlight Activation Capability — Remotely turn on the headlights to illuminate y[...]

Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your IntelliVoice-IQ vehicle security and convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories. In fact, Clifford Electronics hold[...]

Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet (up to 300 feet with the optional ElectroLoop Antenna). A weak remote control battery will reduce range. Electrical interference and even sunspots can interr[...]

What each button/channel does Your IntelliVoice-IQ remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel ex cept 9 through 12 to any function (see pages 17-21). The following chart indicates what each remote control channel number does, and how to transmit each chann[...]

TO ACTIVATE THE PANIC FEATURE . . . . . . . . . . Press button 1 for 3 seconds. The lights will flash repeatedly and the siren will blare for 30 or 60 seconds (user-selectable), or until you press button 1 again to turn it off. If the ignition is on (indicating you are in the car), the doors will automatically lock to prevent an assailant from ente[...]

AntiScan™ Thieves can disarm some other brands of car alarms with a “scanner” that rapidly transmits one remote control code after another. Clifford’s AntiScan will detect any scanner and block the codes it generates. Anti-CodeGrabbing™ (ACG) with Random Code Encryption A Clifford exclusive that protects you and your automobile from the m[...]

UltraSecure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system. How? To enable valet mode, t[...]

To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all Clifford systems have the same factory-set code, it is highly advisable that [...]

Remote controlled sensor adjustments Due to ever-changing conditions, all alarms require periodic fine-tuning of their sensors. With other alarms, this requires repeated trips back to the dealer. But IntelliVoice-IQ lets you can adjust sensitivity electronically without even knowing where the sensor is mounted! If the setting(s) of the Proximity Se[...]

Smart AutoTesting™ with Verbal Diagnostics Each time you remotely arm the system, it tests all triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem after saying “ ARMED ” by sounding a door-bell-like chime and flashing the parking lights 4 times instead of the usual 2 t[...]

Remote controlled voice/chirp switching Whenever you wish, you may easily switch between the system’s “ ARMED ” and “ DISARMED ” announcements and siren chirp confirmations (one chirp confirms remote disarming, two chirps indicate that the system is armed). To do so, simply press button 1/channel 5 (LevelShift once, then button 1) while t[...]

AutoLock and AutoUnLock™ For your safety and that of your passengers, the doors automatically lock when you turn on the ignition to start the engine, and unlock when you turn the ignition off. To suit your preferences, you may turn off either or both the AutoLock and/or AutoUnLock features. There are four possibilities: AutoLock “on” while Au[...]

User-selectable features Your IntelliVoice-IQ allows you to set many of its features to your own personal preferences. Although the system’s programming capabilities are very extensive, we have made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times. Once you’ve changed a few settings, you?[...]

EXAMPLE 1: Turn off siren sound number 2: You can turn each of the siren’s six different sound patterns on and off as you wish to create you own custom sound (see the Personalized Siren Sounds section on page 15 for more information) To turn off “Sound 2” you’ll note that “Sound 2” is in column 1, row 2 of the Table (on pages 20–21). [...]

5. To exit the program mode, turn the ignition off . You’ll hear 3 chirps to confirm program mode exit. You just made three programming changes in only five steps. Easy, isn’t it? Notice again that in step 3 on the previous page you did not have to re-select column 1. If you don’t touch the switch, the system stays in the column for 10 second[...]

Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Column 4 4th latched Row 1 1st momentary Sound 1: on /off info on page 15 Add new remote to channel 1 info on page 8 NOTE 1 AutoLock on /off info on page 16 Enhanced AutoArming: on /off info on page 10 Row[...]