DeLonghi PAC-A130HPE manual

4 Impor tant S af eguar ds • Use this appliance only as described in this instruction manual. As with any electrical appliance, the instructions aim to cover as many situations as possible. Caution and common sense should be used when operating and installing this air conditioner . • This appliance has been manufactured to cool and dehumidify d[...]

5 The instructions below will enable you to prepare your air conditioner for operation as efficiently as possible. Before use, make sure the air intake and outlet grilles are unobstructed. AIR CONDITIONING WITHOUT INST ALLA TION NOTE: Keep the air hoses as short and free of curves as possible to avoid constrictions. FOR OPTIMAL RESUL TS SET-UP IN A[...]

134 5,27 in. in the win- dow pane in the wall: it is recommended that you insulate a section of the wall using suit- able insulation. in the wooden kickboard of a French win- dow F Semi-permanent installation MAX100 cm MAX 39,37 inches MIN 35 cm MIN 13,77 inches SEMI-PERMANENT INST ALLA TION If required, your appliance can also be installed semi-pe[...]

7 Control panel DESCRIPTION OF THE CONTROL P ANEL 1 Air conditioning symbol 2 Dehumidifying symbol 3 Fan symbol 4 Heating symbol 5 SMART symbol 6 BOOST symbol 7 T emperature indicator 8 Timer symbol 9 Alert symbol THE CONTROL P ANEL 1 7 9 12 2 6 8 3 5 4 11 10 13 14 15 16 17 10 AUTOF AN indicator 11 Fan speed indicator 12 SLEEP symbol 13 MODE button[...]

8 Oper a tion AIR CONDITIONING MODE Ideal for hot muggy weather when you need to cool and dehu- midify the room. T o set this mode: • Press the MODE button a number of times until the air-conditio- ning symbol appears. • Select the target temperature by pressing the or but- ton until the desired temperature is reached. • Select the desired fa[...]

Maximum speed: to achieve the target ventila- tion as rapidly as possible Medium speed: reduces noise levels while maintaining a comfortable ventilation Low speed: for silent operation and maximum energy efficiency In this mode, AUTO speed cannot be selected. HEA TING MODE C ERT AIN MODELS ONL Y This is ideal in spring and autumn when outdoor tempe[...]

10 D escription of the r emote control DESCRIPTION OF THE REMOTE CONTROL 1 Signal transmission 2 Air conditioning symbol 3 Dehumidifying symbol 4 Fan symbol 5 HEA TING symbol 6 SMART symbol 7 Selected temperature scale indicator 8 T emperature selected 9 SLEEP symbol 10 BOOST symbol 11 Fan speed indicator 12 AUTOF AN indicator 13 Clock 14 T imer &a[...]

I NSERTING OR REPLACING THE BA TTERIES • Remove the cover on the rear of the remote control. • Insert two “AAA” 1.5V batteries, making sure they are in the cor- rect position (see the instructions inside the battery compart- ment). • Replace the cover . If the remote control unit is replaced or discarded, the batteries must be removed and[...]

12 SLEEP FUNCTION This function is useful for the night as it gradually reduces operation of the appliance and turns it off after 8 hours. T o set this function correctly: • Select the operating mode (air conditioning, dehumidifying, smart or heating (certain models only) as described above. • Press the button. The appliance operates in the pre[...]

13 Self-diagnosis I F … IS DISPLA YED , WHA T SHOULD I DO ? L OW T EMPERA TURE (frost prevention) P ROBE F AILURE (sensor damaged) F ULL T ANK (empty the internal tank) The appliance is fitted with a frost protection device to avoid excessive formation of ice on internal compo- nents. The appliance starts up again automatically when the defrostin[...]

14 Tips T o ensure optimal per form ance from your portable air conditioner , follow these recom- mendations: • Close the windows and doors in the room to be air conditioned. The only exception is when the appliance is installed through a hole in the wall. In this case, you are recom- mended to leave a slight draught through a door or window to g[...]

15 Cleaning Before cleaning or maintenance, turn the appliance of f by pressing the ON/ST AND-BY button then always unplug the appliance from the outlet. CLEANING THE SURF ACE OF THE UNIT Y ou should clean the appliance with a slight- ly damp cloth then dry with a dry cloth. For safety reasons, never wash the air condi- tioner with water . Precauti[...]

16 T r oubleshooting PROBLEM CAUSE REMEDY The air conditio- ning unit does not start . • No electricity. • It is not plugged into the outlet. • The safety device of the plug has tripped. • The inter nal safety device has tripped. • Restore electricity. • Plug into the outlet. • Reset the safety plug. • Wait 30 minutes, if the pro- b[...]

17 T echnical specification LIMIT CONDITIONS Room temperature for air conditioning 69,8 ÷ 95°F (21° ÷ 35°C) Room temperature for heating 50° ÷ 77°F (10° ÷ 25°C) TECHNICAL SPECIFICA TION Power supply voltage see rating label Max. absorbed power during air conditioning “ Refrigerant “ Cooling capacity “ Absorbed power heating “ (ce[...]

18 Limited W arr anty De’Longhi is the distributor of Kenwood home appliances. This warranty applies to all home appliances with De’Longhi or Kenwood brand names. FOR CONTIGUOUS UNITED ST A TES ONL Y Limited W arranty W e warrant each De’Longhi AIR CONDITIONER to be free from defects in material and workman- ship. From the purchase date, our [...]