Doro Comfort 3005 manual

Doro Comfort 3005 English[...]

English 1. Extra amplication (boost) 2. Handset/Speaker volume control 3. Service access keys 4. MEMO 5. Hanging peg for handset 6. Store 7. Message waiting indicator 8. New call and answering machine on/off indicator 9. Phonebook/Caller ID 10. Clear 11. Menu 12. UP/DOWN 13. OK/Call key 14. Answering machine functions 15. Speaker/Headset 16. Mic[...]

English Contents Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Connection .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

English Installation This device is intended for the analogue telephone network lines in A T , BE, BG, CH, CY , CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT , L V , L T , LU, MT , NL, NO, PL, PT , RO, SI, SK, SE. Connection 1. Connect the curly cord to the handset and then to the socket marked q on the unit. 2. Connect the mains adapter (if i[...]

English W all mounting The phone can be wall mounted. W ARNING Make sure that no cables, water pipes or gas pipes are located inside the wall before drilling into it. 1. Drill two holes in the wall, vertically 102 mm mm apart. 2. Insert the screws, allowing them to project ~5 mm out from the wall. 3. Unplug and remove the handset. 4. Position the p[...]

English 3. Press to terminate the call. Note! If you wish, you can switch between handset and handsfree mode by simply pressing or lifting the handset. Please remember that in handsfree mode it is only possible for one person at a time to talk. The switch-over between speaker and microphone is automatic. It is therefore essential that there are no [...]

English Key Letters/symbols 1 [Space character] + & - / X 1 2 A B C Å Ä Æ æ å ä ß 2 3 D E F ë 3 4 G H I ï 4 5 J K L 5 6 M N O Ñ ñ Ö ö 6 7 P Q R S 7 8 T U V Ü ü 8 9 W X Y Z 9 * ` @ ( ) * < > 0 , . : ? = 0 # $ _ % ! ; # Storing contacts 1. Press b / to select phonebook mode. Ensure b is displayed. 2. Press p . NEW CONT ACT? i[...]

English 2. Select required memory location using v / V . 3. Press and hold p until EDIT CONT ACT? is displayed. Press p . 4. Change displayed phone number with c and v / V . Press p . 5. Changes to displayed name can be made using c and v / V . 6. Press p to conrm the changes. Deleting contacts 1. Press b / to select phonebook mode. Ensure b is [...]

English OUT OF AREA No information received, e.g. an international call PRIV A TE The call comes from a withheld number or a PBX Q Number not previously seen T A call is received while using the Call W aiting function 5 Message W aiting indication. Deleting numbers 1. Press b / to select CALL LIST mode. Ensure is displayed. 2. Select the number you[...]

English Once these incoming messages have been erased or read this cycle will be repeated. This is useful when remotely accessing your unit. If there is no answer after three rings, no incoming messages have been recorded and you can terminate the call before you are charged. Pin code The PIN CODE (default=0000) is needed in order to gain access to[...]

English 2. Record your outgoing message. Speak clearly towards the machine from a distance of 15-20 cm. 3. Release to stop recording. 4. The outgoing message will be repeated after a few seconds. Repeat this procedure if you want to change the message, any old outgoing message will automatically be erased when a new one is recorded. Check outgoing [...]

English Delete incoming message If you want to delete a single incoming message press c while the message is playing. T o erase all messages after playback, press and hold c until unit beeps. Note! New messages cannot be deleted until they have been played. With PRIV ACY MODE activated you need to enter the PIN CODE (default=0000) and then press 0 [...]

English Remote control commands Command Function 1# Play new messages 2# Play all messages During playback: 3# Erase single message during playback 4# Skip to previous message 5# Stop playback 6# Skip to next message After playback: 7# Switching the answering machine on and off 8# Record a new outgoing message, to stop recording press 5# 9# Record [...]

English When the memory is full MEMORY FULL is displayed, the answering machine will answer after 10 rings to allow remote playback and deletion of messages, no new messages will be accepted until the existing messages have been played and erased. Other PBX Message W aiting Indicator Some PBX systems use a function called Message W aiting. The phon[...]

English T roubleshooting Check that the telephone cord is undamaged and properly plugged in. Disconnect any additional equipment, extension cords and other phones. If the problem is resolved, the fault is with some other equipment. T est the equipment on a known working line (e.g. at a neighbour’ s house). If the equipment works there the fault i[...]

English Declaration of Conformity Doro hereby declares that Doro Comfort 3005 conforms to the essential requirements and other relevant regulations contained in the Directives 1999/5/EC (R&TTE) and 2002/95/EC (RoHS). A copy of the Declaration of Conformity is available at www .doro.com/dofc W arranty This product is guaranteed for a period of 1[...]

English 14[...]

[...]

[...]

LAST P AGE English V ersion 1.0 © Doro AB. All rights reserved. www .doro.com REV 3672 — STR 1 1 1025[...]