Garmin 3006C manual

GPSMAP 3006C/3010C (GPSMAP 3006C shown) 3006-3010 Cover.indd 1 6/4/2004, 3:03:47 PM[...]

Except as expressly pr ovided herein, no part of this manual may be r eproduced, copied, transmitted, disseminated, downloaded or stor ed in any stor - age medium, for any purpose without the express prior written consent of Garmin. Garmin her eby grants permission to download a single copy of this manual and of any revision to this manual onto a h[...]

1 Introduction W elcome , T he Garmin GPSMAP 3006C/3010C has no user -serviceable parts . Should you ever encounter a problem with your unit, please tak e it to an authorized Garmin dealer or contact Garmin Customer Service (see page 86) for repairs . T he GPSMAP 3006C/3010C is fastened shut with screws . Any attempt to open the case to change or m[...]

2 Introduction T able of Contents Introduction......................................................................................................................... 1-6 W elcome ............................................................................................................................... 1 T able of Contents ....................[...]

3 Introduction T able of Contents Using the Map Cursor ......................................................................................................... 27 Selecting Map Ranges ..........................................................................................................28 Map Page Options .......................................[...]

4 Introduction T able of Contents Appendices ..................................................................................................................... 75-89 Appendix A: Time Offsets ............................................................................................... 75 Appendix B: Messages.....................................[...]

5 Introduction W arnings and Cautions W ARNING: The GPS system is operated by the United States government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment. Although the Garmin GPSMAP 3006C/3010C is a precision electr onic NA Vigation[...]

6 Introduction P acking List & Accessories Before installing and getting started with your unit, please check to see that your package includes the following items. If any parts are missing, please contact your Garmin dealer immediately . Standard Package: • GPSMAP 3006C or 3010C Unit • GPS 17 GPS Sensor • Bail Mount and T wo Knobs • Po[...]

7 Getting Started Main P age Sequence 7 Getting Started Map Data/Installation/ Manual Conventions Using Additional Map Data The GPSMAP 3006C/3010C comes standard with a built-in basemap showing cities, interstates, coast- line detail, and U.S. tide stations. Optional Garmin Data Cards and MapSource CD-ROMs enhance the versatility of your GPSMAP 300[...]

8 Getting Started Main P age Sequence 8 Getting Started Unit Featur es VOL QUIT ENTER MARK PA G E FCTN FIND ADJ MENU DATA CNFG NAV MOB 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 +- 0 ^ ^ ^ ^ ^ Soft K eys Data Entry K eys Data Card Slots Function K eys Connection P orts Serial Number T ag Infrared (IR) Window (F or Optional Remote) GPSMAP 3[...]

9 Getting Started Main P age Sequence 9 Getting Started 3006C/3010C K eys Always press and release a k ey to perform its primary function. Press , hold for more than one second, then release the ENTER/MARK, ADJ/MENU , NA V/MOB , and D A T A/CNFG k eys to activate their secondary functions . ) VOL QUIT ENTER MARK PA G E FCTN FIND ADJ MENU D ATA CNFG[...]

10 Getting Started Main P age Sequence 10 Getting Started 3006C/3010C K eys Data Entry/Shortcut K eys The Data Entry Keys are used when entering alpha-numeric data in the unit, such as a waypoint name. The Data Entry Keys can be used in conjunction with the ARROW KEYP AD . T o select the fi rst letter press the key once, to select the second lette[...]

11 Getting Started Main P age Sequence 11 Getting Started Using the Optional Marine Remote QUIT PA G E FCTN ADJ MENU NA V MOB DA T A CNFG 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 ZOOM +- 0 RANGE ENTER Optional Alphanumeric Remote Control Usage The GPSMAP 3006C/3010C’ s optional Marine Remote Control gives you the freedom to operate you[...]

12 Getting Started Main P age Sequence 12 Getting Started Understanding the F eatures Understanding the Featur es The GPSMAP 3006C/3010C unit’ s advanced keypad system is designed to allow quick, convenient selection of navigation options and data entry . As you progr ess through this Owner’ s Manual, you will often be directed to press a speci[...]

13 Getting Started Main P age Sequence 13 Getting Started Powering On/Off the GPSMAP 3006C/3010C Learning the basic operations, before moving ahead to the features of the GPSMAP 3006C/3010C, is essential. Many times throughout this manual you will be pr ompted to press a key . When instructed, press and then release the key . If the key needs to be[...]

14 Getting Started Main P age Sequence 14 Getting Started Selecting Options How T o Select Options Y ou can select and activate options and enter data to customize the GPSMAP 3006C/3010C to fi t your requirements. Y ou can use the ENTER and DA T A ENTRY keys, and the ARROW KEYP AD to select options, enter names and numbers in data fi elds, activa[...]

15 Getting Started Main P age Sequence 15 Getting Started Entering Data How T o Enter Data Naming a waypoint or placing any sort of data that has not been predefi ned requires the use of the ARROW KEYP AD , ENTER , and/or DA T A ENTRY keys. T o enter a name or number in a data fi eld: 1. Once you have accessed a page with programmable data fi el[...]

16 Getting Started Main P age Sequence 16 Getting Started Initializing the Receiver Initializing the Receiver The fi rst time you power up your new GPSMAP 3006C/3010C MFD and GPS 17 receiver , the receiver must be given an opportunity to collect satellite data and establish its present position. T o ensure pr oper initialization, the GPS 17 is shi[...]

17 Getting Started Main P age Sequence 17 Getting Started Initializing the Receiver/ Status Bar When viewing the GPS Info, a signal strength bar for each satellite in view appears on the right of the page, with the appropriate satellite number under each bar . The progress of satellite acquisition is shown in three stages: • No signal strength ba[...]

18 Getting Started Main P age Sequence 18 Getting Started Main P ages Main Pages Main Pages are the primary screens which contain navigation and other helpful information to assist you. There are thr ee factory default pages: the Map Page, Compass Page, and Highway Page. One optional page, the Video Page, appears if you ar e inputting a video signa[...]

19 Getting Started Main P age Sequence 19 Getting Started Confi guring Main P ages Confi guring Main Pages Each of the Main Pages may be customized to fi t your navigational needs. Y ou may modify digital data fi elds and add additional secondar y Functions to each of the Main (Primary) Pages. Factory default and some optional hardwar e Main Pa[...]

20 Getting Started Main P age Sequence 20 Getting Started Confi guring Main P ages T o change the size of the Digital data fi elds: 1. Press and hold the D A T A/CNFG k ey for two seconds . T he Confi guration window appears . 2. Using the ARROW KEYP AD , highlight the Digital 1 or Digital 2 adjustment sliders and press ENTER . 3. Press UP on th[...]

21 Getting Started Main P age Sequence 21 Getting Started Using Functions/ DAT A Ke y Active Function window Functions List Active Function Window Active Function Window Adjustment Menu Adjustment Menu Using Function Windows Factory default or optional hardware Main Pages may be added as additional Function windows or “Functions” to any of the [...]

22 Getting Started Main P age Sequence 22 Getting Started Creating W aypoints W aypoint Review P age Y ou may choose from a list of useful symbols . Creating W aypoints Through this exer cise you will create a new waypoint, name the waypoint, and assign a symbol to the waypoint. Y ou will fi nd the term “W aypoint” is used frequently when talk[...]

23 Getting Started Main P age Sequence 23 Getting Started Creating W aypoints Use the ARROW KEYPAD or D A T A ENTR Y k eys to enter a waypoint name . Use the ARROW KEYPAD or D A T A ENTR Y k eys to enter a Comment. 3. F or example if you wished to enter “PRA CTICE 1” as a waypoint name . Press the D A T A ENTR Y key labeled “P , Q , R, S , 7?[...]

24 Getting Started Main P age Sequence 24 Getting Started Basic Navigation Navigating to a W aypoint GPS is all about marking positions as waypoints and navigating to them using the receiver’ s steering guidance and map displays. W e’ve already seen how to use the ENTER/MARK key to store our pr esent position, so it’ s time to move on to the [...]

25 Getting Started Main P age Sequence 25 Getting Started Using the Compass Page Located on the Compass Page are the Bearing Pointer , and a Compass Ring. For a GPS to navigate properly , it has to be moving. When you are moving, the orange Bearing Pointer points toward your destination, while the Compass Ring refl ects the direction that you are [...]

26 Getting Started Main P age Sequence 26 Reference How to Use the Map P age Map Page The GPSMAP 3006C/3010C’ s Map Page provides a comprehensive display of electr onic cartography , plotting and navigational data. When using the unit with the optional BlueChart data or MapSource software, the map display shows your boat on a digital chart, compl[...]

27 Getting Started Main P age Sequence 27 Reference When the cursor reaches the edge of the map , the unit may pause as it loads new map data. Using the Map Cursor The cursor allows you to pan away from your pr esent position and scroll to other map ar eas around the world (even outside of your current detail coverage). As you pan past the edge of [...]

28 Getting Started Main P age Sequence 28 Reference T o eliminate the cursor and re-center your position on-screen: Press the QUIT ke y. The cursor may also be used to create new waypoints directly fr om the map. T o create a waypoint with the cursor: 1. Use the ARROW KEYP AD to move the cursor to the desired map position. 2. Press the ENTER/MARK k[...]

29 Getting Started Main P age Sequence 29 Reference Map Page Options The Map Page provides access to functions and featur es relating to the Map Function window using the Adjustment ( ADJ ) and/or SOFT KEY options. The available Adjustment ( ADJ )/ SOFT KEY options are: Measure Distance, Hide/Show Detail, and Setup. As you add optional hardwar e to[...]

30 Getting Started Main P age Sequence 30 Reference • Setup ( Map Setup) — allows you to confi gure the map display to your preferences, including map detail, map orientation, automatic zoom, and various map items and points. When you choose the Map Setup option, the vertical list of Main Menu tabs (see pg. 55) displays, with the ‘Map’ tab[...]

31 Getting Started Main P age Sequence 31 Reference International - All maps are drawn using a symbol set similar to the IALA symbol set. Symbol Size— Small, Medium, and Large: contr ols the screen size of the navaid symbols. Light Sectors— Off, Auto, On: contr ols the drawing light sectors on the map. Indicate the actual color of each sector u[...]

32 Getting Started Main P age Sequence 32 Reference Bearing Line— Off, All Ranges, Auto, <30 ft. to <800 mi.- sets the maximum scale at which the fea- ture should appear on the screen: toggles the r ed/yellow line which continually points to the current navigation point. Course Line— Auto, Off, 120 ft.-800 mi.: sets the maximum zoom scale[...]

33 Getting Started Main P age Sequence 33 Reference Using the Compass P age Compass Page The GPSMAP 3006C/3010C features two dif ferent navigation pages: Compass and Highway . Whenever a NA V goto, Follow T rack, T racBack, or Follow Route have been activated, the GPSMAP 3006C/3010C’ s Compass Page guides you to your destination with digital read[...]

34 Getting Started Main P age Sequence 34 Reference Highway P age Whenever a Go T o, T racBack or route has been activated, the GPSMAP 3006C/3010C’ s Highway Page provides digital and graphic steering guidance to the destination with the Navigation Page. The right side of the Highway Page features confi gurable Digital Data fi elds that display[...]

35 Getting Started Main P age Sequence 35 Reference • Setup — allows you to select what waypoints and tracks are shown on the Highway display . Use the ARROW KEYP AD and ENTER key to select/deselect the desired options. Four options ar e available: • Active Route W aypoints— all active route waypoints • User W aypoints— only nearby wayp[...]

36 Getting Started Main P age Sequence 36 Reference Cr eating and Using W aypoints The MFD stores up to 4000 alphanumeric waypoints with a user -defi ned icon, comment, depth, and water temperature available for each waypoint. (If you are using optional Garmin Sonar har dware, the Depth and W ater T emp fi elds fi ll in automatically .) W aypoin[...]

37 Getting Started Main P age Sequence 37 Reference Creating W aypoints Graphically W aypoints may also be quickly created with the Map Page cursor , which allows you to point to any map position or map feature to create a new waypoint. When you move the cursor over a map item, you see a highlighted description of that item. The GPSMAP 3006C/3010C [...]

38 Getting Started Main P age Sequence 38 Reference Creating W aypoints Additional Options For Cr eating W aypoints W aypoints may also be created by manually entering position coordinates thr ough the Points tab of the Main Menu. This method can be useful for creating a waypoint at a specifi c latitude/longitude posi- tion from a chart or other s[...]

39 Getting Started Main P age Sequence 39 Reference Reviewing and Editing W aypoints Reviewing and Editing W aypoints Once you have created and stored a waypoint, it may be modifi ed, r eviewed, renamed, moved (pr o- jected), or deleted at any time through the waypoint “Review” page. This page display details about the waypoint and a Map windo[...]

40 Getting Started Main P age Sequence 40 Reference T o change the waypoint symbol: 1. Highlight the waypoint symbol fi eld to the left of the w aypoint name and press ENTER . 2. Use the ARROW KEYP AD or DA T A ENTR Y k eys to select the desired symbol and press ENTER . T o change the comment/position coordinates/depth/water temperature: 1. Highli[...]

41 Getting Started Main P age Sequence 41 Reference The “ Reference” fi eld displays the waypoint’ s distance and bearing from your curr ent position. Y ou may also reference the waypoint’ s location from another waypoint, map location, or category from a data car d. T o reference a waypoint from another item: 1. F rom the waypoint Review [...]

42 Getting Started Main P age Sequence 42 Reference 4. With ‘Next’ highlighted, press ENTER to return to the list. T he fi eld highlight automatically moves to the next waypoint in the list. The following options are available by pressing ADJ/MENU while highlighting a waypoint on the ‘User’ submenu of the ‘Points’ tab: • Delete W ayp[...]

43 Getting Started Main P age Sequence 43 Reference appears. Since the unit only alerts for one of the overlap points, use caution when navigating in these areas. If you enter a red alarm cir cle overlap, you are only alerted to the closest proximity waypoint. T o add a proximity waypoint: 1. Use the ARROW KEYP AD to select the ‘New Alarm’ butt[...]

44 Getting Started Main P age Sequence 44 Reference Going to a Destination Going to a Destination Using the NA V key , the GPSMAP 3006C/3010C provides four primary ways to navigate to a destina- tion: Go T o Point, Follow Route, Follow T rack, and T racBack. Once you are actively navigating, you see a straight line that always runs from your curr e[...]

45 Getting Started Main P age Sequence 45 Reference T o activate a new map point (non-map item) as a ‘Go T o’ from the map display: 1. Use the ARROW KEYP AD to move the arrow cursor to the desired position and press NA V . 2. With ‘Go T o MAP P oint’ highlighted, press ENTER or the associated D A T A ENTR Y ke y. T o stop navigation: Press [...]

46 Getting Started Main P age Sequence 46 Reference 4. Next, the tr ack begins saving and then displays the ‘Saved T rack’ window when done . T he default name , distance , number of points (700 maximum), and a map overview are displayed. To change the name of the saved tr ack, highlight the name fi eld and press ENTER , mak e your changes and[...]

47 Getting Started Main P age Sequence 47 Reference • If the receiver is turned off or satellite coverage is lost during your trip, the T racBack draws a straight line between any point where coverage was lost and where it r esumed. • If your track log’ s changes in distance and direction are too complex, 300 waypoints may not mark your path [...]

48 Getting Started Main P age Sequence 48 Reference Routes The last way to navigate to a destination is to create a user -defi ned route. A route is a series of waypoints or map items which may be navigated from point to point. The Garmin GPSMAP 3006C/3010C system lets you create and store up to 50 r eversible routes (number ed 1-50), with up to 3[...]

49 Getting Started Main P age Sequence 49 Reference To create a r oute using text from the Route Review page: 1. Hold ADJ/MENU for two seconds to display the Main Menu. Use the ARROW KEYP AD to highlight the ‘Routes’ tab . 2. Highlight the ‘New Route’ button and press ENTER . 3. Press FCTN , then highlight the ‘Numbers’ button and press[...]

50 Getting Started Main P age Sequence 50 Reference The following additional options are available by pressing NA V and selecting the desired option while navigating a Route: • Invert Route— reverses the Route to follow it from the end point back to the beginning. • Re-Evaluate Route— recalculates and reactivates the curr ent route data. Se[...]

51 Getting Started Main P age Sequence 51 Reference The Route Review page also allows you to enter a 15-character name for any listed route. By default the name includes the fi rst and last points in the route. T o enter a custom route name: 1. F rom the Route Review page , highlight the name fi eld and press ENTER to begin editing. 2. Use the AR[...]

52 Getting Started Main P age Sequence 52 Reference T o edit a route point from the Map window: 1. Use the ARROW KEYP AD to highlight the desired route point or you wish to edit and press ADJ/MENU . A pop-up menu of editing choices appears . 2. Select ‘Remove’ to remove the route point. 3. Select ‘Move’ (user waypoints only) to move the way[...]

53 Getting Started Main P age Sequence 53 Reference Planning Routes The Route Review ‘Numbers’ list displays trip-planning information for each leg or the entire r oute. Y ou may access the Planning setup from either Route Review list and the data may be viewed from the Route ‘Numbers’ list only . The far right data column may be changed to[...]

54 Getting Started Main P age Sequence 54 Reference Find K ey The FIND key allows you to search the unit for user waypoints, map items, and any optional BlueChart or MapSource information loaded on a data car d. Press the FIND key to search for items fr om your current location by default. Y ou may also search fr om other locations. When you press [...]

55 Getting Started Main P age Sequence 55 Reference Main Menu Page The GPSMAP 3006C/3010C’ s Main Menu Page provides access to various waypoint, system, naviga- tion and interface management, and setup menus in an easy to use “tab” format. The Main Menu page is available from any page in the MFD’ s system, and is accessed through the MENU k[...]

56 Getting Started Main P age Sequence 56 Reference Sky View Signal Strength Bars Receiver Status Accuracy 45° 90° Outer ring - the horizon Inner ring- 45° above the horizon Center dot - 90° above the horizon Main Menu— GPS T ab Database (continued) • Card – interface contr ol for saving waypoints, routes and tracks to a data card. Setup [...]

57 Getting Started Main P age Sequence 57 Reference W AAS Capability The GPSMAP 3006C/3010C is capable of receiving W AAS (Wide Area Augmentation System) satellite signals. W AAS is an F AA (Federal A viation Administration) funded project to impr ove the overall accuracy and integrity of the GPS signal for aviation use, but land/sea based users ma[...]

58 Getting Started Main P age Sequence 58 Reference The GPS Info tab features a “Setup” submenu tab that pr ovides access to functions and features relating to the GPS tab. • Skyview Orientation— allows you to select between a North Up or T rack Up sky view display for the GPS Info display only . • Source— set to ‘Garmin’ when using[...]

59 Getting Started Main P age Sequence 59 Reference with the time progr essing from left to right. (Sunrise/sunset info may not be available for a few stations). The solid, light vertical lines are in 4-hour increments, and the light, dotted vertical lines ar e in 1-hour increments. A solid, vertical line (with the current time box at the top) indi[...]

60 Getting Started Main P age Sequence 60 Reference Y ou may also change the date to see tide charts for other days and move the time bar on the tide chart in approximately 5 minute incr ements to show tide heights at various times on the chart. T o change the date for the tide chart: 1. Using the ARROW KEYP AD , highlight the “On” fi eld and [...]

61 Getting Started Main P age Sequence 61 Reference T rip T ab— displays data for T rip Odometer , Moving A verage speed, T otal A verage speed, Maximum Speed, Stopped T ime, Moving T ime, T otal T ime, and Odometer . Y ou may clear the data by choosing from ‘Clear T rip’, ‘Clear Odometer’, ‘Clear Max Speed’, or ‘Clear All’ and pr[...]

62 Getting Started Main P age Sequence 62 Reference • Clear button— allows you to clear the active track log currently stored in memory . • Defaults button— restores T rack T ab settings to factory defaults. Saved Submenu T ab— manages a list of any saved track logs, allows T racBack activation, map display of saved logs. The active log s[...]

63 Getting Started Main P age Sequence 63 Reference DSC T ab— allows to control and set up DSC (Digital Selective Calling) features on the unit. What is Digital selective calling (DSC)? Digital Selective Calling (DSC) uses marine VHF radio and Global Positioning System (GPS) technolo- gies to transmit and receive location information. DSC is used[...]

64 Getting Started Main P age Sequence 64 Reference How ARE MMSI assignments obtained? Non-commercial users (e.g. r ecreational users who remain in domestic waters and only carry VHF , EPIRB (Emergency Position Indicating Radio Beacons), and Radar ar e not required to have a FCC ship station license. The FCC and Coast Guard have authorized some sec[...]

65 Getting Started Main P age Sequence 65 Reference When the Garmin GPSMAP 3006C/3010C is connected to a VHF with DSC support, the GPS unit dis- plays a Call List, Log, and a Directory available to store incoming information received fr om another user’ s DSC capable VHF/GPS combination. Basic wiring is required for the Garmin unit and VHF radio [...]

66 Getting Started Main P age Sequence 66 Reference T o Review a Call or Log Entry: 1. F rom the DSC tab of the Main Menu and the “Call List” or “Log” tab highlighted, press UP or DOWN on the ARROW KEYP AD until the call you want to review is highlighted. 2. Press ENTER to select the call. DSC Item Review The DSC Item Review operates simila[...]

67 Getting Started Main P age Sequence 67 Reference DSC Setup T ab Garmin chartplotters have the ability to turn DSC ‘On’ or ‘Off ’. This option is benefi cial for users who have more than one GPS chartplotter . If you want only DSC to display on a particular chartplotter , tur n DSC off on the r emaining Garmin chartplotters that support [...]

68 Getting Started Main P age Sequence 68 Reference Alarms T ab— contains setting for the unit’ s alarms. The Alarm tab consists of three default submenu tabs: System alarms, Nav alarms, and Sonar alarms. Alarms messages appear in red acr oss the Status Bar or changes a Data Field if that fi eld displays alarm related data (i.e. Depth, V oltag[...]

69 Getting Started Main P age Sequence 69 Reference T o set an alarm: 1. Use the ARROW KEYP AD to highlight desired submenu tab of the Alarm T ab . 2. Highlight the fi eld below the alarm name you wish activate and press ENTER . 3. Change the mode to the desired setting and press ENTER . 4. Highlight the next fi eld to the right and press ENTER ,[...]

70 Getting Started Main P age Sequence 70 Reference • Automatic Backlight – automatically adjusts the display brightness to a specifi ed level at sunrise and sunset. Offset minutes for Befor e Sunrise and After Sunset may also be specifi ed. T o adjust the Automatic Backlight settings: 1. With “ Automatic Backlight” set to ‘On’, selec[...]

71 Getting Started Main P age Sequence 71 Reference The following additional formats are available: • hddd.ddddd° – latitude/longitude in decimal degrees only • hddd°mm’ ss.s” – latitude/longitude in degrees, minutes, seconds • UTM/UPS – Universal T ransverse Mercator / Universal Polar Stereographic grids • British Grid • Dutc[...]

72 Getting Started Main P age Sequence 72 Reference • Heading – lets you select the reference used in calculating heading information. Y ou can select from ‘Auto Mag V ar’, ‘T rue’, ‘Grid’ and ‘User Mag V ar’. ‘Auto Mag V ar’ provides magnetic north heading references which ar e automatically determined from your curr ent po[...]

73 Getting Started Main P age Sequence 73 Reference Routes, Request T racks, Request W aypoints, Send Proximity , Send Routes, Send T racks and Send W aypoints. • NMEA In/NMEA Out – supports the input/output of standard NMEA 0183 data, DSC, and sonar NMEA input support for the DPT , MTW and VHW sentences. Y ou may also adjust the NMEA output. ?[...]

74 Getting Started Main P age Sequence 74 Reference Lat/Lon Minutes Precision allows you to adjust the number of digits to the right of the decimal point for transmission of NMEA Output, either 2, 3 or 4 digits. The W aypoint ID setting lets you choose to output the waypoint identifi ers as names or numbers. T o set up the Advanced NMEA page: 1. H[...]

75 Getting Started Main P age Sequence 75 The chart below gives an approximate UTC (Universal T ime Coordinate) time of fset for the various longitudinal zones. Check with local charts for more detailed information. If you are in daylight savings time, add one hour to the offset. Longitudinal Zone Offset W180.0º to W172.5º -12 W172.5º to W157.5?[...]

76 Getting Started Main P age Sequence 76 The GPSMAP 3006C/3010C uses an on-screen pop-up message system to alert you to unit operating characteristics. Press the QUIT key to acknowledge and return to the page you were viewing. Accuracy Alarm— The GPS accuracy has fallen outside of user -set value. Alarm Clock— The alarm clock has sounded. Anch[...]

77 Getting Started Main P age Sequence 77 Messages Appendix B Not All Maps Fit, Some Maps will not be drawn— Maximum number of individual maps on data card(s) has been exceeded. Off Course Alarm— Y ou have exceeded the specifi ed of f-course distance. Proximity Alarm Memory is Full— Y ou have used all available proximity waypoints. Proximity[...]

78 Getting Started Main P age Sequence 78 Adindan Adindan- Ethiopia, Mali, Senegal, Sudan Afgooye Afgooye- Somalia AIN EL ABD ‘70 AIN EL ANBD 1970- Bahrain Island, Saudi Arabia Anna 1 Ast ‘65 Anna 1 Astro ‘65- Cocos I. ARC 1950 ARC 1950- Botswana, Lesotho, Malawi, Swaziland, Zaire, Zambia, Zimbabwe ARC 1960 Kenya, T anzania Ascnsn Isld ‘58 [...]

79 Getting Started Main P age Sequence 79 Kertau 1948 W est Malaysia, Singapore L. C. 5 Astro Cayman Brac Island Liberia 1964 Liberia 1964- Liberia Luzon Mindanao Luzon- Mindanao Island Luzon Philippine Luzon- Philippines (excluding Mindanao Isl.) Mahe 1971 Mahe 1971- Mahe Island Marco Astr o Marco Astr o- Salvage Isl. Massawa Massawa- Eritrea (Eth[...]

80 Getting Started Main P age Sequence 80 Loran TD System LORAN-C is a radio navigation aid operated and maintained in the United States by the United States Coast Guard. The name LORAN is an acr onym for “LOng RAnge Navigation”. The LORAN system covers the entire United States and the U.S. Coastal Confl uence Zone. From the perspective of a m[...]

81 Getting Started Main P age Sequence 81 T o setup Loran TD from the Main Menu: 1. Using the ARROW KEYP AD , highlight the ‘System’ tab, then press RIGHT to highlight the ‘Units’ submenu tab . Highlight the “P osition F ormat” fi eld and press ENTER . 2. Highlight ‘Lor an TD’, press ENTER , then highlight the ‘Setup’ button to[...]

82 Getting Started Main P age Sequence 82 Cleaning - The unit’ s case is constr ucted of high quality mate- rial and does not r equir e user maintenance other than cleaning. Clean the unit housing using a cloth lightly dampened with a mild detergent solution and then wipe dry . A void chemical cleaners and solvents that may damage plastic compone[...]

83 Getting Started Main P age Sequence 83 Appendix F Installing/Removing Data Cards Once the data card has been read, a sum- mary screen appears . Press ENTER/MARK to acknowledge . Installing and Removing Data cards The GPSMAP 3006C/3010C uses optional Garmin marine BlueChart and MapSource data car ds to dis- play digital charts and maps on-screen.[...]

84 Getting Started Main P age Sequence 84 Appendix G Regulatory Information FCC Compliance The GPSMAP 3006C/3010C complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to pr ovide more reasonable pr otection against harmful interference in a residential installation, and a[...]

85 Getting Started Main P age Sequence 85 Appendix G Software License Agreement Software License Agreement BY USING THE GPSMAP 3006C/3010C, YOU AGREE TO BE BOUND BY THE TERMS AND CONDI- TIONS OF THE FOLLOWING SOFTW ARE LICENSE AGREEMENT . PLEASE READ THIS AGREEMENT CAREFULL Y . Garmin grants you a limited license to use the software embedded in thi[...]

86 Getting Started Main P age Sequence 86 Appendix G Limited W arranty LIMITED WARRANTY This Garmin product is warranted to be fr ee from defects in materials or workmanship for one year from the date of pur chase. Within this period, Garmin will at its sole option, repair or r eplace any compo- nents that fail in normal use. Such repairs or replac[...]

87 Getting Started Main P age Sequence 87 Appendix H Index A Accessories 6 Accuracy 57 Accuracy Circle 31 Active Route Details 34 Active T rack Log 61 ADJ/MENU Key 9 Advanced Map Card Setup 32 Advanced NMEA Output 73 Advanced Setup, Maps 32 Alarm T ab 68 Anchor Drag 68 Arrival Alarm 68 ARROW KEYP AD 9 Aspect, V ideo 35 AutoLocate 58 Automatic Backl[...]

88 Getting Started Main P age Sequence 88 Appendix H Index DSC (Digital Selective Calling) 63 DSC Call List 65 DSC Directory 66 DSC Distress Call 64-65 DSC Entry Review 66 DSC Log 65 DSC Position Report 64-65 DSC Setup 67 DSC T ab 63 E Editing Routes 51 Editing W aypoints 39 Edit Active Route 34 Elevation Units 71 ENTER/MARK Key 9 Entering Data 15 [...]

89 Getting Started Main P age Sequence 89 Appendix H Index Main Menu Page 55 Main Menu T abs 55 Main Pages 18 Manage User Card 67 Manual Conventions 7 MapSource 7, 67, 83 Map Cursor 26, 27 Map Data 7 Map Datums 71, 78 Map Outlines 30 Map Page 26 Map Setup 30 Map Setup Defaults 31 Marking Y our Present Position 36 MARK Key 37 Measure Distance 29 Mer[...]

90 Getting Started Main P age Sequence 90 Appendix H Index Storage 82 Sunrise 53 Sunset 53 Sun Rise/Set 60 Symbol Set 30 Symbol Size 31 System Alarms 68 System Information 70 System Mode 69 T T emperature 71, 74 T emperature Scale 74 T emperature T ab 69, 74 T emperature T ime Duration 74 T ides 58 T ide Stations 59 T ide T ab 58 T ime Format 72 T [...]

91 Getting Started Main P age Sequence 91 Appendix H Index Units 70 Unit Features 8 User Datum 78 User W aypoint List 41 V V ideo Page 35 W W AAS 57, 58 W arnings 5 W ARRANTY 86 W ater Immersion 82 W ater T emperature Alarm 68 W aypoints, Creating 22, 36, 37, 38 W aypoints, Deleting 40, 42 W aypoints, Editing 39 W aypoints, Manual Entry 38 W aypoin[...]

92 92[...]

3006-3010 Cover.indd 3 6/4/2004, 3:05:22 PM[...]

For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin web site at www .garmin.com. © Copyright 2004 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Est[...]