GBC Titan GBC 1244WF manual

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 1 GBC TITAN 1264WF/1244WF INSTALLATION & OPERATIN G MANUAL Part Number: 930-144 Rev A. GB Operating Instructions I Istruzioni per l'Uso D Bedienungsanleitungen NL Gebruiksaanwijzing F Mode d'Emploi E Instrucciones de Operación Part Number: 1264 WF 3600242 12[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 2 GB The info rmation in this pub lication i s pro vided for reference and is believed to be accurate and comp lete. General Bind ing Co rporation (GBC ) is not liabl e fo r errors in this pub lication or for incidental o r conseq uential d amage in connection with th e fu[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 3 TABLE OF CONTENTS Description Page No. Description Page No. Cover Legal Disclai mer Table of Contents Important Safet y Instructions Important Safegu ards General ,Electric & Ser vice Warranty Specifications Pre- Installation Installation Section 1-Detailed Specif ic[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 4 IMPORTANT S AFETY INSTRUCT IONS YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO GBC. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT, YOU WILL FIND I MPORTANT SAFETY MESSAGES REGARDING THE PRODUCT. READ THESE MESSAGES CAREFULLY. READ ALL OF THE INSTRUCTIONS AND[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 5 WARRANTY Limited 90- Day Warranty GBC warrants to the original pu rchaser for a period of ninety days on lab or and one year on p arts after in stallation that this laminator is free from defects in workmanship and material under normal us e and service. GBC’s oblig at[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 6 PRE-INSTALLAT ION Before a 1264 WF/1244WF Laminator can be installed, ensure the following requirements are met: 1. Are doorways and hallways wide enough for the laminator to be moved to the installation site? 2. Is there ample room for the laminator?  A work area mus[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 7 Section 1: Detailed Specifications Specifications provide a ll of the technic al da ta for the Titan 1244WF &1264WF Description: Features: Applications:  A high speed laminator f or the graphic ar ts professional as we ll as f or the manufacturer who produces prom[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 8 Section 2: Consum ables Film Types: Film Diameters: Core Size: Film widths: Paper widths:  Poly-in films, thermal and PSA films  Poly-out films, thermal and PSA  Accushield  Up to a 7 in. outside roll diameter. (18 cm.)  3 in. core standard. (76 cm.) 1264W[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 9 Section 3: Funct ion Speed: Motor: Heating Capabilities: Controls: Roll Design: Section 4: Electr ical Requirements:  1264 WF:  1264WF CE:  1244 WF:  1244WF CE: B.T.U output:  1264 WF:  1264WF CE:  1244 WF:  1244WF CE:  0-10 fpm (0-6.1mpm)  [...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 10 Heater Wattage:  1264 WF:  1264WF CE:  1244 WF:  1244WF CE: Amperage draw:  1264 WF:  1264WF CE:  1244 WF:  1244WF CE: D/C Voltage used: A/C Voltage Used:  4500W / Heater  3300W / Heater  3000 W / Heater  Drive Motor=3.3 Amps.  Fan[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 11 Connectors for 126 4 WF NEMA 6-30 P NEMA 6-30 R Connectors for 124 4 WF NEMA 6-20 P NEMA 6-20 R[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 12 Section 5: Dim ensions Weight:  1264 WF:  1264WF CE:  1244 WF:  1244WF CE: Dimensions:  1264 WF:  1264WF CE:  1244 WF:  1244WF CE: Nip Height:  Crated: 750 lbs. (340 kg.)  Uncrated: 600 lbs. (272 kg.)  Crated: 350 lbs (159 kg.)  Uncra[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 13 Section 6: Know yo ur Laminator This section is intended to aide the user in becoming more familiar with the 1244 WF & 1264 WF laminators. Refer back to this section if you have questions regarding references to certain parts of the laminator in this laminator. 1.) [...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 14[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 15[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 16 Know y our Laminator Continued- 1.) Safety Shiel d:  The Safety Shield ai ds in preventing t he operators fingers from becoming pinched or burne d in the heat roll ers of the laminator. Wi th the Safet y Shield raised or rem oved, the machi ne goes into the safety mo[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 17 Section 7: Display Control Panel Stand-by Pressing STAND-BY will cause the laminator to go into the AUTO-OFF mode. The laminator will automatically go into this mode after sitting idle for an extended amount of time. When in AUTO-OFF mode the laminator will no longer co[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 18 Display Control Panel-Continued Top and Bottom Temperature Use the up or down arrow keys to increase or decrease the set temperature of the heat rollers. The temperature shown on the display is the temperature at which the unit is attempting to attain. For example if th[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 19 Display Control Panel-Continued The Temperature displayed in the area referred to as TOP TEMPERATURE and BOTTOM TEMPERATURE is the value that the laminator is attempting to attain. Pressing the MEASURE button will momentarily display the actual roller temperature. The c[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 20 Section 8: Safety The 1244Wf & 1264 WF have numerous safety features that will help keep the operator safe from harm. But for these features to work correctly, the user must become familiar with each of the safety mechanisms as well as never override a safety featur[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 21 Safety Shield-Continued To remove the Safety Shield , fi rst raise the shield and locate the spring hinge pin on the right side of the shield. Pull the pin to release the shield from the laminator as illustrated in the photo. Feed Table The Feed Table supports the produ[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 22 Section 9: How to Guide This section discusses how to load film on the unwinds, how to center film, how to select and change the nip, how to center film, how to select and change the nip, how to use the inline slitters and rear slitter. Loading Film Begin by removing th[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 23 Loading Film Continued The core chucks need to be adjusted to match the width of the film that is going to be loaded on the laminator. To do this, be gin by removing the rubber o-rings. Then use the included hex tool to loosen the setscrews in the core chucks. Note: Do [...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 24 Select and Change the Nip The Roller Handle raises and lowers the Main Rollers and Pull Rollers simultaneously. The Roller Handle Guide is notched with preset nip heights. The Roller Handle is located on the right side of the laminator. Keep hands and fingers clear of t[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 25 In-Line Slitters The In-Line Slitters allows the operator to slit the images as they pass through the Main Rollers and into the Pull Rollers. The trimmed waste can then be attached to the Rewinder Tubes and disposed of later. To engage the In-Line Slitters , simply pres[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 26 Section 10: Applications The 1244 WF & 1264 WF can accommodate Poly-in or Poly-out films. Poly-out means the adhesive is on the outside of the roll. Each film requires a slightly different loading procedure. Refer to the Webbing diagrams at the end of this section. [...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 27 Webbing Thermal Film Using Threading Card CAUTION: The la minator rolle rs wil l be hot and can b urn you. For pressure sensitive film (PSA), refer to the section titled WEBBING: USING FILM THREADING CARD FOR PSA FILM. 1. Turn the Main Power ON / OFF to On. 2. Set top a[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 28 Fig. 6 Fig. 7 Fig.8 Webbing PSA Film/Mount Adhesive Using Threadin g Card The laminator should be c ool to the touch before Proceeding. 1. Turn the Power ON /OFF to On 2. Load the rolls of film as illustrated in ( Fig. 6 ). Ensure no brake tension is applied to the film[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 29 Start Laminating 1. At this point you should have your laminator Web bed with the appropriate material for your application. 2. The fee d table s hould be in t he normal operating position. 3. Close the main and Pull roll ni ps. Rollers should be closed. 4. Speed is set[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 30 Fig. 11 Fig.12 Method for Tacking New Film to Existing Film The following describes a method for loading film whereb y the existing film present on th e hea t rollers may be used in place of the threading card to draw the new film t hrough the laminator. The adhesive of[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 31 To Unweb the laminator Unweb the laminator if you a re c hanging fil m widths, cleaning the rollers or have finished usi ng the machine for the day. CAUTION: Do not cut yourself 1. Using a slitter, cut (1) the output fro m the web (Fig. 13). 2. Cut (2) remaining top fil[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 32 Fig. 15 Fig.16 Fig. 17 Tips for Pre Coating Boards 1. Load the laminator as illustrated in (Fig. 15). Remove chill idler. 2. The wi dth of t he roll should n ot exceed th e width of the board by more than 1/2 in. (1.3 cm). 3. Use a leader board to set the main roller an[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 33 Tips f or Creating a Decal 1. Load the lamin ator as illustrated in Fig . 18 . 2. The over laminate may be PSA or thermal type. 3. If us ing th ermal type, pa y a ttention to the P oly- in/Poly-out rule. 4. Run a test material prior to running t he ac tual image to ensu[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 34 Fig. 21 CUSTOM WEB PATH #1 Fig. 22 Fig. 23 Tips for ACCUSHIELD 1. Load the lamin ator as illustrated in Fig .21. 2. You must ha ve the Separator bar option to a ccurately run this material. See your Sales Rep for ordering the Separator Bar. 3. Set Top Te mp to 2 65 o F [...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 35 SPEED / TEMPE RATURE CO NTROL This is only a general reference guide. Different s ettings may be suitable as the warm up ti me, l amination ti me and materials change. Factors that may affect the speed and temperature parameters; 1. Image length 2. Image width and ink c[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 36 - A - - B - Fig. 24 - A - - B - Fig. 25 - A - - B - Fig. 26 Heat The “ READY” indicator m ay extinguish if the speed is set too fa st for the materia l being la minated. Either lower t he speed setting or pres s STOP a nd wait until the “READY” indicator illumin[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 37 MAINTENANCE Caring For the GBC 2064WF L aminator GBC off ers Cleaning kits as well as Extended Mainten ance Agreement s. Contact yo ur local GBC Service Representative or your dealer/distributor for additional i nformation. The only maintenance required by the operator [...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 38 TROUBLE SHOO TING GUIDE SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION The control panel dis play does not illuminate when P OWER ON/OFF is in the ON, mar ked “I”, positi on Laminator not connecte d to electrical suppl y Insert attachment plug into receptacle Blown out fu[...]

GBC 1264WF/1244WF Operation Manual © 2006 General Bi nding Corporation Page 39[...]