IBM PPC-1510PT manual

- 1 - Use r ’ s Manual PPC - 1510P T 15.1” TFT Low Power 667Mhz Panel PC[...]

- 2 - Ⅰ . Pictures of PPC - 1 57T Silver (Stainless Steel Color) VESA - 75 VESA - 100 I/O ports[...]

- 3 - Ⅱ . Panel PC Specifications ◆ Display - 15.1" color TF T flat panel ◆ Displa y Type - TFT LCD panel ◆ Luminance – 200 - 250 cd/m2 brightness luminance ◆ CPU - P - III equivalent Low power 667Mhz CPU L1 & L2 cache built on CPU ◆ System Chipset - Twister - T , VIA VT8606 , 82C686B ◆ Front Bezel - Thick 10mm Aluminu m - [...]

- 4 - Ⅲ . Power Supply Input : 100 - 240 VAC ~ 2A 50/60Hz DC Output : +5V/7A, +12V/1.5A - 12V/0.3A, +5Vsb /0.75A Ⅳ . NAGASAKI Panel PC Comparison table Model no. SBC CPU Power PPC - 64T NASA - 6820 667Mhz on board AC - DC Adaptor PPC - 70T MS - 2100 300Mhz on board AC - DC Adaptor PPC - 106T NASA - 6109 667Mhz on board AC - DC Adaptor PPC - 106[...]

- 5 - Ⅴ . Touch Panel 1. Application 2. Warranty 3. Features 4. Characteristics 4.1 Usable Temperature Range 4.2 Storage Temperature Range 4.3 Input Method 5. Electrical Specifications 5.1 Linearity 5.2 Insulation Resistance 5.3 Chattering Time 6. Mechanica l Specifications 6.1 Operating Force (with pen) 6.2 Surface Hardness 7. Optical Specificat[...]

- 6 - 11. Cautions 1. Application : This specification is applied to 6wire Touch Panel. 2. Warranty : TOUCH PANEL products manufactured to this specification shall be capable of meeting all characteristics for a minimum period of 12 months the date of shipping from NAGASAKI IPC when stored or used as specified under normal condi tions within the co[...]

- 7 - 7. Optical Specifications 7.1 Light Transmittance ( Total Transm ittance) ： More than 78% （ Measuring apparatus ： Haze meter - made by BYK - Gardner Type ： Haze – Gard - plus 4726 Illuminant ： CIE - A Standard ： ASTM D 1003 ） 8. Reliability Item No. Item Ratings Test Methods & Condition 8 - 1 Line drawing operation 1,000,0[...]

- 8 - 10.2 Criterion The followings are applied to viewing area The item 10.2 (1,2,3,4) should apply to the VA (view area) unless none VA affect electrical performance (1) Scratch W i d t h 0 . 1 m m a n d l e n g t h 2 0 m m ≦ ≦ ： Accept . Width > 10 mm or Length > 20mm ： Reject (2) Granular foreign object D i a m e t e r 0 . 5 m m ?[...]

- 9 - Ⅵ . NASA - 6109 User ’ s Manual Copyright Notice The content of this manual has been checked for accurac y . The manufacturer assumes no responsibility for any inaccuracies that may be contained in this manual. The manufacturer reserves the right to make impr ovements or modification to the this document and/or the product at any time wit[...]

- 10 - CPU Supporting Embedded VIA EDEN ESP5000 (533MHz) or VIA c3 800MHz CPU LAN Adapter Realtek 8139C or Intel 82559ER Audio Adapter *Optional VGA Adapter On chip 2D/3D Graphic Controller w/ SMA up to 8MB LCD Supporting TFT TTL LCD optional LVDS l ROM - Disk Socket Yes (2 - 288MB) TV - Out Optional I/O Port 4S/2P IDE Interface U. DMA 33/66/100 DI[...]

- 11 - with the option of the higher performed VIA C3 800MHz CPU. For e asier assembly and better integration without arranging array of cables, NASA - 6109 provides onboard connectors with a si milar conventional ATX layout. NASA - 6109 provides the option of integrating Watch Dog Timer for ideal unattended terminals. To offer b etter flexibilit y[...]

- 12 - ◆ Windows 95 OSR - 2 VXD and integrated Windows 98 / NT5 miniport driver support ◆ BIOS shadow at 16KB increment ◆ Supports 2, 4 and 8 Mbytes of Frame Buffer with share memor y. ◆ DirectDrawTM an d DirectVideoTM Hardware Support ◆ Advanced Mobile Power Management ◆ CRT Power Management (VESA ™ DPMS) Optional for Flat Panel Inte[...]

- 13 - ◆ LCD cable (Optional) ◆ IDE Driver includes: Drivers for Windows NT 3.x / 4.x, Windows 95, 98, 2000, Win Me, Linux, Novell Netware and AMI FLASH ROM utilities. ◆ Driver utilities for on - board VG A drivers, LAN adapter and DOC 2000 If any of these items are missing or damage, please contact the dealer from whom you purchase the mothe[...]

- 14 - Chapter 2 . Setting up the 6109 CPU board Jumpers and Connectors Jumpers/Connectors Overview: Function Jumpers/Connectors Cooling Fan Connector JFAN1, JFAN2 Power Supply: Power Good JP12: Pin 9~ 11 ATX Power On/Off Switch JP12: Pin 12~13 Audio Port Connecto r CN1 2nd Printer Port CN4 LAN Adapter Disable/Enable JP3 COM1 Port CN6 COM2 Port CN8[...]

- 15 - Function Jumpers/Connectors External Speaker JP12: Pin 3, Pin 6 Buzzer On/Off JP12: Pin 4, Pin 5 Hardware Reset Switch JP12: Pin 7, Pin 8 External Power Good JP12: Pin 9, Pin 10 Internal Power Goo d JP12: Pin 10, Pin 11 ATX Power Supply On/Off Switch JP12: Pin 12, Pin 13 Power LED JP12: Pin 14, Pin 15 WDT Function Enable/Disable JP12: Pin 19[...]

- 16 - JP9 (COM1, 2) / JP4 (COM3, 4) Voltage Selector: Voltage COM1(JP9) COM2(JP9) COM3(JP4) COM4(JP4) +12V(dc) 1 - 2 7 - 8 1 - 2 7 - 8 R.I. 3 - 4 9 - 10 3 - 4 9 - 10 +5V(dc) 5 - 6 11 - 12 5 - 6 11 - 12 JP10, JP 11: RS232 / 422 / 485 Selector for COM2 TYPE JP10 JP 11 RS - 232 1 - 2, 4 - 5, 7 - 8, 10 - 11 1 - 2 RS - 422/485 Full Duplex 2 - 3, 5 - 6,[...]

- 17 - 7 - 8 Hardware RESET Reserved 9 - 10 10 - 11 Reserved 12 - 13 ATX Power On/Off 14 - 15 Power LED (14:LED+, 15:LED - ) Close for PS/2 Power 16 - 17 17 - 18 Close for ATX Power 19 - 20 Close: Enable WDT functio n J1: IR Pin Header. Pin No. Function 1 +5V(DC) 2 N.C. 3 IRRX 4 GND. 5 IRTX CN1: Audio Output Port connector via AV Card Kit (Optional[...]

- 18 - 17 JBCY 18 JAB2 19 JBCX 20 JAB1 21 JACY 22 JBB2 23 JACX 24 JBB1 25 MSO 26 MSI CN7: Pin Header for PS2 KB / MS Pin No. Signal (KB) Pin No. Signal(MS) 1 KB Data 2 MS Data 3 KEY 4 KEY 5 GND 6 GND 7 +5V(DC) 8 +5V(DC) 9 KB_CLK 10 MS_CLK Printer (LPT1/LPT2) Port Pin No. Description Pin No. Description 1 STB# 10 ACK# 2 PD0 11 BUSY 3 PD1 12 PE 4 PD2[...]

- 19 - Close for Normal Type * Caution: Improper setting will damage LCD panel. C N5: LCD - LVDS Output. Pin No. Signal Pin No. Signal 1 Y0 - 2 Y2 - 3 Y0+ 4 Y2+ 5 Y1 - 6 Rc v . Voltage 7 GND 8 Y3 - 9 Y1+ 10 Y3 11 CK - 12 VDD_PNL 13 CK+ 14 DISP_OFF 15 VBL 16 GND LCD_CON1: TFT LCD Panel Port Pin No. Signal Pin No. Signal 1 VBL 2 VBL 3 GND 4 GND 5 VDD[...]

- 20 - 31 FPD 1 32 FPD 0 33 GND 34 GND 35 P_CLK 36 FLM 37 DE 38 LP 39 GND 40 PBKL 41 PNKL 42 KEY 43 VCC 44 VCC * Please make sure the Pin 1 location before inserting the LCD connector. Factory Setting: JP1: All Pin Open JP7: Close Pin 1 - 3, Pin 4 - 6 JP8: Close Pin 1 - 2 JP13: Factory Using only JP14: Close Pin 2 - 3; Pin 5 - 6; Pin 8 - 9; Pin 11 [...]

- 21 - There are two different riser cards that can be fitted to NASA - 6109 CPU board. The first one is a 98pin ISA only Bus riser card (traditional IS A Bus riser card), the second one is a 188pins PCI/IS A riser card. P lease note: PCI/IS A riser cards jumper settings have to be matched with the motherboard INT/AD - select jumper. The default IN[...]

- 22 - An IRQ number is automatically assigned to PCI expansion cards after those used by Legacy and PnP IS A cards. In the PCI Bus design, the BIOS is automatically assigned an IRQ to a PCI slot that has a card in it which requires an IRQ. To install a PCI card, you need to set the correct "ADSEL" and "INT" (interrupt) assignme[...]

- 23 - Chapter 3. AMI BIOS SETUP AMI BIOS Setup Main Menu Standard CMOS Setup Advanced CM OS Setup Advanced Chipset Setup Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Setup HDD Security Password Auto - Detect Hard Disks Change User Password Change Supervisor Password Change Language Setting Auto Configu r[...]

- 24 - Choose “ Auto Configuration with Optimal Setting ” from the menu for loading the defaults parameters that is set by the manufacturer for the most stable normal configuration. Press F10 or “ Save Setting and Exit ” to save the changes and reboot the system. 3 - 2. Description of the BIOS Setup Option Please make clear the means of tho[...]

- 25 - D400, 16k Shadow Disabled D800, 16k Shadow Disabled DC00, 16k Shadow Disabled S.M.A.R. T . For Hard Disks Set this option to “ Enabled ” to permit AMIBIOS to use the SMART (System Management System Management and Reporting Technologies) protocol for reporting server system information over a network. The settings are “ Enabled ” or ?[...]

- 26 - AGP Mode 4x AGP Read Synchronization Enabled AGP Fast Write Disabled AGP Aperture Size 128MB AGP Master 1 W/S Write Disabled AGP Master 1 W/S Read Disabled PCI Delay Transaction Enabled USB Controller All USB Port USB Device Legacy Support All Device Configure SDRAM Timing by SPD SPD (Serial Presences Detect) is a device in memory module for[...]

- 27 - This function allows adjusting AGP Aperture Size from 2MB to 256MB to increased VG A performance. AGP Master 1 W/S Write Allows you to enable / disable the AGP Master Write with 1 wait state AGP Master 1 W/S Read To enable / disable the AGP Master Read with 1 wait state PCI Delay Transaction To enable / disable the AGP Fast Write function US[...]

- 28 - SB IRQ Select 5 SB DMA Select 1 MPU - 401 Enabled MPU - 401 I/O Address 330h - 333h FM Port (388h - 38Bh) Enabled Game Port (200h - 207h) Enabled Onboard FDC Set th is option to “ Enabled ” to enable the floppy drive controller on the motherboard. The settings are Auto (AMIBIOS automatically determines if the floppy controller should be [...]

- 29 - EPP Version This option s pecifies the Enhanced Parallel Port specification version number that is used in the system. This option only appears if the Parallel Port Mode option is set to EP P . The settings are 1.7 or 1.9. Parallel Port IRQ This option spe cifies the IRQ used by the parallel port. The settings are Auto, (IRQ) 5, or (IRQ) 7. [...]

- 30 - Allows you to Enable / Disable onboard MIDI port, Game Port (200h - 270h) This option allows configuring onboard Game port address. The choices: Disabled; 200h; 207h 3 - 6. Power Management Setup Powe r Management Setup Power Management/APM Enabled Video Power Down Mode Disabled Hard Disk Power Down Mode Disabled Standby Time Out (Minute) Di[...]

- 31 - This o ption specifies the power conserving state that the hard disk drive enters after the specified period of hard drive inactivity has expired. The settings are Disabled, Standb y , or Suspend. Standby/Suspend Timer Unit This option specifies the unit of time used for the Standby and Suspend timeout periods. The settings are 4 msec, 4 sec[...]

- 32 - DMA Channel 6 PnP DMA Channel 7 PnP IRQ3 ISA/EIS A IRQ4 SA/EISA IRQ5 PCI/PnP IRQ7 ISA/EIS A IRQ9 PCI/PnP IRQ10 PCI/PnP IRQ 11 PCI/PnP IRQ14 PCI/PnP IRQ15 PCI/PnP Plug and Play Aware O/S Set this option to Yes to inform AMIBIOS that the operating system can handle plug and Pla y (PnP) devices. The settings are No or Yes. The Optimal and Fail [...]

- 33 - These options allow you to specify the bus type used by each DMA channel. The settings are PnP or ISA/EISA . 3 - 8. Hardware Monitor Setup Provide some info rmation such as CPU temperature, speed of cooling fan and usage voltage of CPU for use r. Chapter 4. VGA, LCD, DOC Featur 4 - 1. AGP - BUS VG A Feature The NASA - 6109 built - in Graphic[...]

- 34 - external LVDS transmitters to support TFT LCD Panel with LVDS built - in. The flat panel interface provides or supports the following f unctions for various panels: - Generates flat panel interface signals like FLM, L P , SCLK, and DE - Generates different video data formats to directly drive different types of panels - Vertical and horizont[...]

- 35 - JP15 Memory Address 1 - 2 0C800H - 0C9FFH 1 - 2 0CC00H - 0CDFFH 3 - 4 0DCCCH - 0D1FFH 3 - 4 0D400H - 0D5FFH 5 - 6 0D800H - 0D9FFH 4 - 5. Driver Utility Installation Guide 1. When finis hing with the W indows platform (95/98/2000/NT) installation, please install the relative VI A driver (4in1) utilities for compliance of the compatibility wit[...]

- 36 - 4. Select VI A 4in1 service pack driver install to the system 5. The Screen will appear VIA 4in1 driver setup screen, please press “ NEXT ” to continue. Please follow the steps instructed by each screen for the installation of the VI A 4in1 driver. Restart the system after the complet ion of the installation. 6. After VIA 4in1 driver ins[...]

- 37 - Chapter 5 . LAN Adapter The on - board LAN adapter use of Single Chip Fast Ethernet Controlle r , that is highly integrated and requires no “ glue ” logic external memory on board. It runs in the bus master mode and directly sending/receiving Ethernet packet to/from memor y . The On - board LAN adapter can directly fetch the system CPU. [...]

- 38 - Twisted Pair Number Pin Number Signal Description To Pin Number Signal Description 1 1 2 TD+ TD - à 1 2 TD+ TD - 2 3 6 RD+ RD - à 3 6 RD+ RD - RJ - 45 Connector Pin Assignments Figure A - 1 shows the RJ - 45 Connector pin ass ignments 5 - 3. Connecting 100Base - TX Fast Ethernet Network The system board provides an RJ - 45 port for connect[...]

- 39 - 10Mbps network onl y. - Category 5 cable is also good for 10Mbps operation. Use UTP Category 5 cable for the versatility to operate the network at either 100Mbps or 10Mbps speed without changing cable. - Two pairs of wiring are required. - Depending on building codes, different insulation materials may be required. Plenum - rated or TEFLON -[...]

- 40 - 5 - 7. LED Indicators The system board comes with two LED indicators on the edge of the motherboard that indicates the network system status. If you experience any problems with the adapte r , first make sure th e appropriate driver is loaded, the proper cable is connected to the RJ - 45 port and the hub complies with the adapter specificati[...]

- 41 - >> A: REST8139.EXE <ENTER> 1. View Current Configuration This allows you to find the PCI Fast Ethernet adapter current configuration in your system. 2. Set Up New Configuration Select New Set Up Configuration option from the main menu The option settings can be changed, the table shown as below: Option Default Setting Other Ava[...]

- 42 - Software Installation Examples Before installing the driver programs, please refer to each directory that contains a README file, which provides detailed installation instructions, or to execu te the HELP8139.EXE help file viewer in DOS. The utility will then present with a screen showing the information about how to install the network driv[...]

- 43 - ---- Screen Message ---- DOS/4G Protected Mode Run - time Version 2.01a Copyright © Tenberry Softwar e, Inc. 1996 Please wait for loading BIOs ROM …. AMI Flash Utility V8.27.25 Flash ROM Programming report Chipset Vendor Chipset Code ROM Filename Boot Block Programming : VIA : VIA686A/B : xxxx.ROM : Yes Flash ROM Vendor Flash ROM Code ROM[...]

- 44 - D - SUB Type Connector for COM port (RS232); Pin No. Description Pin No. Description 1 DCD 6 DSR 2 RX D 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND Box Header Type Connector for COM port (RS232); Pin No. Description Pin No. Description 1 DCD 2 DSR 3 RXD 4 RTS 5 TXD 6 CTS 7 DTR 8 RI 9 GND 10 N.C Printer (LPT1/LPT2) Port Pin No. Description Pin No. Des[...]

- 45 - Pin No. Description Pin No. Description 2 GREEN 10 GND 3 BLUE 11 N.C 4 N.C 12 DDC D AT 5 GND 13 H.Sync 6 GND 14 V .Sync 7 GND 15 DDC CLK 8 GND FDD Connector Pin No. Description Pin No. Description 1,3,5,7 GND 14 DSA# 9, 11,13 GND 16 MOB# 15,17,19 GND 18 DIR 21,23,25 GND 20 STEP# 27,29,31 GND 22 WD# 33 GND 24 WE# 2 RWC# 26 TRAK0 4,6 N.C 28 WP[...]

- 46 - 11 CK - 12 VDD_PNL 13 CK+ 14 DIS P_OFF 15 VBL 16 GND TFT LCD Panel Port Connector (LCD - CON1) Pin No. Signal Pin No. Signal 1 VBL 2 VBL 3 GND 4 GND 5 VDDLCD 6 VDDLCD 7 ENPVEE 8 GND 9 FPD 23 10 FPD 22 11 FPD 17 12 FPD 16 13 FPD 11 14 FPD 10 15 FPD 9 16 FPD 8 17 FPD 21 18 FPD 20 19 FPD 15 20 FPD 14 21 FPD 7 22 FPD 6 23 FPD 5 24 FPD 4 25 FPD 1[...]

- 47 - USB PORT Pin No. D escription 1 2 USB VCC 3 4 USB D ATA - (0,1/2,3) 5 6 USB D AT A+(0,1/2,3) 7 8 USB_GND 9 10 USB_GND Audio Output Port Connector (CN1) Pin No. Function Pin No. Function 1 BITCLK 2 GND 3 SDIN 4 N.C. 5 SDIN2 6 N.C. 7 SDOUT 8 N.C. 9 SYNC 10 GND 11 - ACRS T 12 GND 13 SPEAK 14 Strapping Low 15 +5V(DC) 16 +12V(DC) 17 JBCY 18 JAB2 [...]

- 48 - IDE1, IDE2 Connector Pin No. Des cription Pin No. Description 2,19,22 GND 13 IDE data2 24.26.30 GND 14 IDE data13 40 GND 15 IDE data1 20,21,28 N.C 16 IDE data14 29,32,34 N.C 17 IDE data0 1 IDE reset 18 IDE data15 3 IDE data7 23 IDE Write 4 IDE data8 25 IDE Read 5 IDE data6 27 IDE Ready 6 IDE data9 31 IDE IRQ 7 IDE data5 33 IDE A1 8 IDE data1[...]

- 49 - Pin No. Description A Description B Description E Description F 11 AEN - SMEMW GND GND 12 SA19 - SMEMR PCLKE - REQ1 13 SA18 - IOW GND AD31 14 SA17 - IOR AD30 AD29 15 SA16 - DACK3 PCLKG N.C 16 SA15 DRQ3 KEY KEY 17 SA14 - DACK1 - GNT2 - REQ2 18 SA13 DRQ1 AD28 AD27 19 SA12 REFRESH AD26 AD25 20 SA 11 SYSCLK AD24 - CBE3 21 SA10 IRQ7 AD22 AD23 22 [...]

- 50 - Pin No. Description C Description D Description G Description H 8 LA17 - DACK0 AD13 AD10 9 - MEMR DRQ0 AD 11 AD8 10 - MEMW - DACK5 AD9 AD7 11 SD8 DRQ5 - CBE0 AD5 12 SD9 - DACK6 AD6 AD3 13 SD10 DRQ6 AD4 AD1 14 SD 11 - DACK7 AD2 AD0 15 SD12 DRQ7 KEY KEY 16 SD13 VCC VCC VCC 17 SD14 MASTER VCC VCC 18 SD15 GND GND GND 19 GND GND[...]