Iiyama ProLite T2236MSC-B2 manual

ENGLISH Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor . Please keep this manual in a safe place for your future reference. USER MANUAL[...]

ENGLISH[...]

ENGLISH  We reserve the right to change speci fi cations without notice.  All trademarks used in this user manual are the property of their respective owners. We recommend recycling of used product. Please contact your dealer or iiyama service center . Recycle information is obtained via the Internet, using the address: http://www .iiyama.co[...]

ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY ............................................................................ 1 SAFETY PRECAUTIONS................................................................ 1 SPECIAL NOTES ON LCD MONITORS ......................................... 3 CUSTOMER SER VICE ...................................................[...]

ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fi re or electric shock. NEVER REMOVE THE CAB[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monito[...]

ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE  When you fi rst turn on the LCD monitor , the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.  Y ou may fi nd slig[...]

ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. * The rating of the Power Cable enclosed in 120V area is 10A/125V . If you are using a power s[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 5 When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor . Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monit[...]

ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor . It may cause damage.  Unplug the monitor before removal or installation to avoid electric shock or damage. CAUTION FITTING AND REMOV AL OF B[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 7 CONTROLS AND CONNECTORS <Front > <Back> <Right Side/> Scroll up / Audio Adjust / Blue Light Reducer Button ( UP) Scroll Down / ECO Button ( DOWN) Auto Button (AUTO) Menu Button (MENU) Power Switch ( ) Power Indicator Blue: Normal operation Orange: Power Management Speakers USB Downstream C[...]

ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the computer to the monitor with the USB Cabl[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 9  Procedure for turning ON the Power Switch Turn ON the monitor fi rst, and then the computer .  T ouch screen driver software T ouch screen driver software and system may not start when you start your computer while touching the screen. T ouch screen driver software may not run due to the power sa[...]

ENGLISH 10 BEFORE YOU OPERA TE THE MONITOR ADJUSTING THE VIEWING ANGLE  For optimal viewing it is recommended to look at the full face of the monitor .  Hold the panel so that the monitor does not topple when you change the monitor ’s angle.  Y ou are able to adjust the monitor’s angle up to 90 degrees upward, 5 degrees downward.  D[...]

ENGLISH OPERA TING THE MONITOR 1 1 OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 18 for SCREEN ADJUSTMENTS. Press the[...]

ENGLISH 12 OPERA TING THE MONITOR ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press Luminance T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense * 1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. * 2 i-Style Color is disabled when Blue Light Reducer is[...]

ENGLISH OPERA TING THE MONITOR 13 Adjustment Item Problem / Option Button to Press Image Setup Phase* 1,2 Clock* 1,2 T oo left T oo right T oo low T oo high H. Position* 2 V . Position* 2 T oo narrow T oo wide T o correct fl ickering text or lines Image Setup Clock Phase H.Position V .Position 50 50 50 50 Aspect Full * 1 See page 18 for SCREEN ADJ[...]

ENGLISH 14 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Color T emp.* Y ellowish white Bluish white User-G User-R User-B T oo weak T oo strong User Greenish white Normal Mode1 Mode2 Dark High contrast Mode3 Color T emp. Gamma User-R User-G User-B 50 50 Mode1 50 Color T emp. War m Gamma Color T emp. Normal W arm Cool sRGB [...]

ENGLISH OPERA TING THE MONITOR 15 Language English Deutsch English German Français French Japanese Portuguese Italiano Italian Russian Simpli fi ed Chinese Español Spanish Portuguese T imeout H.Position OSD is too left OSD is too right OSD is too low OSD is too high Y ou can set the OSD display duration time between 5 and 60 seconds. Adjustment [...]

ENGLISH 16 OPERA TING THE MONITOR See your graphic card user guide for more information about changing the resolution and refresh. NOTE Displays information regarding the current input signal coming from the graphic card in your computer . Information Adjustment Item Problem / Option Button to Press Extra Reset Factory-preset data is restored. No R[...]

ENGLISH OPERA TING THE MONITOR 17 Adjustment Item Problem / Option Button to Press V olume T oo soft T oo loud Adjustment Item Problem / Option Button to Press Auto Adjust * Y ou can skip the Menu items and display an adjustment scale directly by using the following button operations. Direct Adjust H. / V . Position, Clock and Phase automatically .[...]

ENGLISH 18 OPERA TING THE MONITOR SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 1920 × 1 080, but can not provide the best at resolutions of less[...]

ENGLISH OPERA TING THE MONITOR 19 1) Adjust the H-POSITION so that the left side of the picture frame will move to the left edge of the display area.  When the left side of the picture frame moves apart from the left edge of the display area during the H-SIZE adjustment, adjust steps 1) and 2).  Another way to make the H-SIZE adjustment is to[...]

ENGLISH 20 OPERA TING THE MONITOR  In case the strong fl icker or blurs remain on a part of the screen, repeat steps and because the H-SIZE may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again.  Adjust the H-POSITION after the FINE adjustment if the[...]

ENGLISH OPERA TING THE MONITOR 21  Even when using the power management mode, the monitor consumes electricity . Turn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.  It is possible that the video signal from the computer may be on while the H or V sync sign[...]

ENGLISH 22 TROUBLE SHOOTING The screen is not synchronized.  The Signal Cable is properly connected.  The signal timing of the computer is within the speci fi cation of the monitor .  The video output level of the c omputer is within th e speci fi c ation of the monitor . The picture does not appear .  The Power Cable is ?[...]

ENGLISH Recycling information 23 For better environment protection please don't dispose your monitor . Please visit our web site: www .iiyama.com/recycle for monitor recycling. RECYCLING INFORMA TION[...]

ENGLISH 24 APPENDIX APPENDIX Design and speci fi cations are subject to change without prior notice. SPECIFICA TIONS : ProLite T2336MSC LCD Panel Panel technology IPS 0.2652mm H × 0.2652mm V Response time Pixel pitch 5ms (Gray to Gray) Display Colors Approx.16.7M Sync Frequency Analog: Horizontal: 30.0-80.0kHz, V ertical: 56-75Hz Digital: Horizon[...]

ENGLISH APPENDIX 25 SPECIFICA TIONS : ProLite T2236MSC LCD Panel Panel technology AMV A 0.248mm H × 0.248mm V Response time Pixel pitch 8ms (Gray to Gray) Display Colors Approx.16.7M Sync Frequency Analog: Horizontal: 30.0-80.0kHz, V ertical: 56-75Hz Digital: Horizontal: 30.0-80.0kHz, V ertical: 56-75Hz Maximum Resolution 1920 × 1080, 2.1 MegaPix[...]

ENGLISH 26 APPENDIX DIMENSIONS : ProLite T2336MSC M140A21 COMPLIANT TIMING Dot Clock 25,175MHz 31,500MHz 36,000MHz 40,000MHz 49,500MHz 65,000MHz 75,000MHz 78,750MHz 108,000MHz 135,000MHz 106,500MHz 146,250MHz 148,500MHz V ertical Frequency 59,940Hz 75,000Hz 56,250Hz 60,317Hz 75,000Hz 60,004Hz 70,069Hz 75,029Hz 60,020Hz 75,025Hz 59,887Hz 59,954Hz 60[...]