Intel ETX CD manual

® Kontron User's Guide ® ETX® CD Document Revision 1.0 All not approved entries are marked[...]

This page intentionally left blan k[...]

Table of Contents Kontron User's Guide ETX CD iii Table of Contents 1 User Information ........................................................................................................ 6 1.1 About This Document ......................................................................................... 6 1.2 Copyright Not ice .............[...]

Table of Contents Kontron User's Guide ETX CD iv 4.5.1 Connector X 3 (Signal Levels) ............................................................................. 29 4.5.2 Connector X 3 Sign al Description ......................................................................... 31 4.6 Connector X4 Subsyste ms .................................[...]

Table of Contents Kontron User's Guide ETX CD v 8.7 System Manageme nt (SM) Bus ........................................................................... 52 8.8 JILI-I2C B us ................................................................................................... 53 9 Limitations ...................................................[...]

1 User Information Kontron User's Guide ETX CD 6 1 User Information 1.1 About This Document This document prov ides information about pr oducts from Kontron E mbedded Mo dules GmbH and/or it s subsidiaries. No warranty of s uitability, purpose, or fitness is implied. Whil e every attempt has been made to ensure that the information in this doc[...]

1 User Information Kontron User's Guide ETX CD 7 The warranty does not ap ply to defects re sulting from improper or inadequate maintenance or handling by the buyer, unauthorize d modification or misuse , operat ion outside of the product’s environmental specifications or improper installation or maintenance. Kontron Embedded Module s GmbH w[...]

2 Introduction Kontron User's Guide ETX CD 8 2 Introduction 2.1 ETX®-CD Based on the ETX® standard, Kontro n’s ETX®-CD, powered by a variety of Intel Pentium core duo processors, is a next-generation em bedded m odule that brings a dvanced technology to to morrow’s applications, as well as continuing today’s legacy devices. Built arou[...]

2 Introduction Kontron User's Guide ETX CD 9 2.2 ETX® Documentation This product manual serves as one of three princi pal references for an ETX® design. It documents the specifications and features of ETX®-CD. The other two references, which are available from the Kontron Embedded Modules We b site, include: ® The ETX® Specification defin[...]

3 Specifications Kontron User's Guide ETX CD 10 3 Specif ications 3.1 Functional Specifications Processor The central processing unit (CPU) cons ists of: Mobile Intel ® Celeron ® M, Intel ® Core Solo ® , Intel ® Core Duo ® or Intel ® Core2Duo ® processor (Codename Yonah/M erom) which includes such fe atures as: ® First dual core proce[...]

3 Specifications Kontron User's Guide ETX CD 11 System Memory The ETX®-CD uses 200-pin DDR2 Small Outline-Dual Inline Memory Modules (SO-DIMMs). One socket is available for a DDR2-533 or DDR2- 667 module up to 2G B capacity. Note: ETX®-CD equipped with the Celer onM423 is not able to drive mem ory modules faster than DDR2-533. Serial Digital[...]

3 Specifications Kontron User's Guide ETX CD 12 AC ’97 (Audio): Intel 945GM; ® Up to 20 bit sample resolu tion ® Multiple sample rates up t o 48bit ® Independent bus master logic for dual M icrophone Input, dual PCM aud io input, PCM audio input, modem in put, modem outp ut and S/PDIF output. Trustes Platform Module (TPM) ® Can be equipp[...]

3 Specifications Kontron User's Guide ETX CD 13 Watchdog timer (WDT): Winb ond Super I/O Real-time clock (requires external battery) 3.1.1 Block diagram Connector X4 Connector X3 Host Bus Connector X1 Hub Interface Feature Connector J11 Connec-tor J8 Connec-tor J9 Connector X2[...]

3 Specifications Kontron User's Guide ETX CD 14 3.2 Mechanical Specifications 3.2.1 Dimensions ® 95.0 mm x 114.0 mm ® Height approx. 12 mm (0.4”) Note: The maximum height of electrical components on the bottom si de of th e module is specified wit h 2.0mm in the ETX@ specification. On the ETX@-CD the Southbridge is solder ed on the bottom [...]

3 Specifications Kontron User's Guide ETX CD 15 ETX®-CD Core Duo Processo r T2500 CPU Clock 2 x 2,0 GHz Mode Full On Power Consumption 4,82 A 3.3.5 Power Consumption ( Windows ® XP SP2) Full Load Idle Idle w ith C1E/EIST ETX® board [A]5V [A]5VSB [W] [A]5V [A]5VSB [W] [A]5V [A]5VSB [W] T2500 6,70 tbd 34,10 3,35 tbd 17,35 1,92 tbd 10,20 L2400[...]

3 Specifications Kontron User's Guide ETX CD 16 3.4 Environmental Specifications 3.4.1 Temperature Operating: (with Kontron Embedded Modules heat- spreader plate assembl y): ® Ambient temperature: 0°C to 60°C ® Maximum heatspreader-plate te mperature: 0°C tp 60°C (*) Non-operating: ® -30°C to 85°C See the Thermal Management chapte r f[...]

3 Specifications Kontron User's Guide ETX CD 17 Notes: Fans usually shipped with Kontron Embedded Modu les GmbH products ha ve 50,000-ho ur typical operating life. The above estimates assume no fan, but a passive heat sinking arrangement. Estimated RTC battery life (as opposed to battery failur es) is not accounted f or in the above figures an[...]

4 ETX® connectors Kontron User's Guide ETX CD 18 4 ETX® connectors The pinouts for ETX® Interface Conne ctors X1, X2, X3, and X4 are documented for convenient reference. Please see the ETX® Specification and ETX® Design Guide for detailed, design- level information. 4.1 Connector Locations IDE Po rt Ethernet Power Good/Reset Input ATX PS [...]

4 ETX® connectors Kontron User's Guide ETX CD 19 4.3 Connector X1 (PCI bus, USB, Audio) Pin Signal Pin Signal Pin Signal Pin Signal 1 GND 2 GND 51 VCC * 52 VCC * 3 PCICLK3 4 PCICLK4 53 PAR 54 SERR# 5 GND 6 GND 55 GPERR# 56 RESERVED 7 PCICLK1 8 PCICLK2 57 PME# 58 USB2# 9 REQ3# 10 GNT3# 59 LOCK# 60 DEVSEL# 11 GNT2# 12 3V 61 TRDY# 62 USB3# 13 RE[...]

4 ETX® connectors Kontron User's Guide ETX CD 20 4.3.1 Connector X1 Signal Levels Pin 1-50 [ Power | PCI | USB | AUDIO ] Pin Si g na l Descri p tion T yp e Termination Commen t 1 GND Ground PWR - - 2 GND Ground PWR - - 3 PCICLK3 PCI Clock Slot 3 O-3,3 - - 4 PCICLK4 PCI Clock Slot 4 O-3,3 - - 5 GND Ground PWR - - 6 GND Ground PWR - - 7 PCICLK1[...]

4 ETX® connectors Kontron User's Guide ETX CD 21 Pin 51–100: [ Power | PC I | USB | AUDIO ] Pin Si g na l Descri p tion T yp e Termination Commen t 51 VCC Power +5V PWR - - 52 VCC Power +5V PWR - - 53 PAR PCI Bus Parit y IO-3,3 - - 54 SERR# PCI Bus S y stem Error IO-3,3 PU 8k2 3,3V - 55 GPERR# PCI Bus Grant Error IO-3,3 PU 8k2 3,3V - 56 nc [...]

4 ETX® connectors Kontron User's Guide ETX CD 22 4.3.2 Connector X1 Signal Description PCI Bus The implementation of t his subsystem complies with the ETX® Specific ation. Implementation information is provided in the ETX® Desi gn Gu ide. Refer to the docume ntation for additional information. USB Three USB host controllers (two 1.1 UHCI an[...]

4 ETX® connectors Kontron User's Guide ETX CD 23 4.4 Connector X2 (ISA Bus) Pin Signal Pin Signal Pin Signal Pin Signal 1 GND 2 GND 51 VCC * 52 VCC * 3 SD14 4 SD15 53 SA6 54 IRQ5 5 SD13 6 MASTER# 55 SA7 56 IRQ6 7 SD12 8 DREQ7 57 SA8 58 IRQ7 9 SD11 10 DACK7# 59 SA9 60 SYSCLK 11 SD10 12 DREQ6 61 SA10 62 REFSH# 13 SD9 14 DACK6# 63 SA11 64 DREQ1 [...]

4 ETX® connectors Kontron User's Guide ETX CD 24 4.4.1 Connector X2 Signal Levels Pin 1–50: [ Power | ISA ] Pin Si g na l Descri p tion T yp e Termination Commen t 1 GND Ground PWR - - 2 GND Ground PWR - - 3 SD14 ISA Data Bus IO-5 PU 8k2 5V - 4 SD15 ISA Data Bus IO-5 PU 8k2 5V - 5 SD13 ISA Data Bus IO-5 PU 8k2 5V - 6 MASTER# ISA 16-Bit Mast[...]

4 ETX® connectors Kontron User's Guide ETX CD 25 Pin 51-100: [ Power | ISA ] Pin Si g na l Descri p tion T yp e Termination Commen t 51 VCC Power +5V PWR - - 52 VCC Power +5V PWR - - 53 SA6 ISA Adress Bus O-3,3 PU 8k2 5V - 54 IRQ5 ISA Interru p t Re q uest 5 I-3,3 PU 8k2 5V - 55 SA7 ISA Adress Bus O-3,3 PU 8k2 5V - 56 IRQ6 ISA Interru p t Re [...]

4 ETX® connectors Kontron User's Guide ETX CD 26 4.4.2 Connector X2 Signal Description ISA Bus Slot The implementation of t his subsystem complies with the ETX® Specific ation. Implementation information is provided in the ETX® Desi gn Gu ide. Refer to the docume ntation for additional information. Restrictions: Memory Transfer: According t[...]

4 ETX® connectors Kontron User's Guide ETX CD 27 25 LCDDO9 26 LCDDO10 27 GND 28 GND 29 LCDDO4 30 LCDDO7 31 LCDDO5 32 LCDDO6 33 GND 34 GND 35 LCDDO1 36 LCDDO3 37 LCDDO0 38 LCDDO2 39 VCC * 40 VCC * 41 JILI_DAT 42 LTGIO0** 43 JILI_CLK 44 BLON# 45 BIASON** 46 DIGON 47 COMP** 48 Y** 49 SYNC** 50 C** Notes: *To protect ext ernal power lines of peri[...]

4 ETX® connectors Kontron User's Guide ETX CD 28 89 DCD1# 90 SLCT# 89 DCD1# 90 WGATE# 91 DSR1# 92 MSCLK 91 DSR1# 92 MSCLK 93 CTS1# 94 MSDAT 93 CTS1# 94 MSDAT 95 TXD1 96 KBCLK 95 TXD1 96 KBCLK 97 RI1# 98 KBDAT 97 RI1# 98 KBDAT 99 GND 100 GND 99 GND 100 GND Notes: *To protect ext ernal power lines of peripheral devices, make sure that : - the w[...]

4 ETX® connectors Kontron User's Guide ETX CD 29 4.5.1 Connector X3 (Signal Levels) Pin 1–50: [ Power | VG A | LCD | TV ] Pin Si g na l Descri p tion T yp e Termination Commen t 1 GND Ground PWR - - 2 GND Ground PWR - - 3 R Analo g Video Out RGB - Red Channel O - - 4 B Analo g Video Out RGB - Blue Channel O - - 5 HSY Horizontal S y nchroniz[...]

4 ETX® connectors Kontron User's Guide ETX CD 30 Pin 51–100: [ Power | COM | LPT | Floppy | KB/MS/IR ] Pin Si g na l Descri p tion T yp e Termination Commen t 51 LPT | FLPY# LPT / Flo ppy Interface Confi g uration In p u t I-5 PU 4k7 5V Hi g h: LPT, Low: 52 nc - nc - Reserved 53 VCC Power +5V PWR - - 54 GND Ground PWR - - 55 STB# | nc LPT S[...]

4 ETX® connectors Kontron User's Guide ETX CD 31 4.5.2 Connector X3 Signal Description VGA Output LVDS Flat Panel Interface (JILI) The user interface for flat panels is the JUMPtec Inte lligent LVDS Interface (JILI). The impleme ntation of this subsystem complies w ith the ETX® Specificati on. Implementation informat ion is provided in the E[...]

4 ETX® connectors Kontron User's Guide ETX CD 32 IrDA The ETX®-CD is capable of IrDA SIR operation. This feature is imp lemented in the Winbon d 83627HF. Contact Kontron Embedded Systems for help with th is feature. Parallel Port The parallel-communication interface shares signals with th e floppy-disk interface. The implementation of this p[...]

4 ETX® connectors Kontron User's Guide ETX CD 33 4.6 Connector X4 Subsystems 4.6.1 Connector X4 (IDE 1, IDE 2, Ethernet, Miscellaneous) Pin Signal Pin Signal Pin Signal Pin Signal 1 GND 2 GND 51 SIDE_IOW#** 52 PIDE_IOR# 3 5V_SB 4 PWGIN 53 SIDE_DRQ** 54 PIDE_IOW# 5 PS_ON 6 SPEAKER 55 SIDE_D15** 56 PIDE_DRQ 7 PWRBTN# 8 BATT 57 SIDE_D0** 58 PIDE[...]

4 ETX® connectors Kontron User's Guide ETX CD 34 4.6.2 Connector X4 (Signal Levels) Pin 1–50: [ Power | IDE | Ethernet | Power control | Misc] Pin Si g na l Descri p tion T yp e Termination Commen t 1 GND Ground PWR - - 2 GND Ground PWR - - 3 5V_SB Su pp l y of internal sus p end Circui t I - - 4 PWGIN Power Good / Reset In p u t I - - 5 PS[...]

4 ETX® connectors Kontron User's Guide ETX CD 35 Pin 51-100: [ Power | IDE | Ethernet | Misc ] Pin Si g na l Descri p tion T yp e Termination Commen t 51 SIDE_IOW# - nc - - 52 PIDE_IOR# Primar y IDE IO Read O-3,3 - - 53 SIDE_DRQ - nc - - 54 PIDE_IOW# Primar y IDE IO Write O-3,3 - - 55 SIDE_D15 - nc - - 56 PIDE_DRQ Primar y IDE DMA Re q ues t [...]

4 ETX® connectors Kontron User's Guide ETX CD 36 4.6.3 Connector X4 Signal Description IDE Ports The IDE host adapter is capable of DMA-133 o peration and supp orts only one single IDE channel which is connected to the primary channel of the ETX® connector X4. Per default it is set to DMA-33, to achieve the best compatibility to most baseboa[...]

4 ETX® connectors Kontron User's Guide ETX CD 37 Miscellaneous Circuits Speaker The implementation of the speaker output c omplies with the ETX® Specification. Imple mentation information is provided in the ETX® Desi gn Gu ide. Refer to the docume ntation for additional information. Battery The implementation of the battery input complies w[...]

4 ETX® connectors Kontron User's Guide ETX CD 38 ® 45pos,150 mm length, 0 .5mm pitch, both ends opposite sides Connector ® Hirose - FH12-45S-0.5SH ® 0.50mm (.020") Pitch FFC/FPC Connecto r, Hori zontal Right Angle, SMT, 45 Circuits 4.7.3 BIOS Requirements There is currently no support for this featu re! 4.7.4 Pinout Fe ature Connector[...]

4 ETX® connectors Kontron User's Guide ETX CD 39 44 Reserved nc 45 Reserved nc[...]

5 Special Features Kontron User's Guide ETX CD 40 5 Special Features 5.1 Watchdog Timer This feature is implemented in th e Winbond 83627HF super I/O. You can configure the Watchdog Timer (WDT) in BIOS setup to start after a set amount of time after power-on boot. The WDT can also be controlled by the JIDA32 Library API (Refer to Append ix F: [...]

6 Design Considerations Kontron User's Guide ETX CD 41 6 Design Considerations 6.1 Thermal Management A heat-spreader plate assembly is available from K ontron Embedded Modules GmbH for the ETX®-CD. Th e heat-spreader plate on top of this assembly is NOT a heat sink. It works as an ETX®-standard thermal interface to use with a heat sink or o[...]

6 Design Considerations Kontron User's Guide ETX CD 42 Article numbers: 18030-0000-9 9-0: Heatsp reader ETX®-CD, Threaded Hole Stand Off 18030-0000-99-1: Heatspreader ET X®-CD, Through Hole Stand Off[...]

7 Important Technology Information Kontron User's Guide ETX CD 43 7 Im por tant T echnology Inf ormation The followin g technological informatio n is designed to give the reader a better understandin g of some of features of the ETX®-CD. This information can be referenced when reading the System Resources and BIOS Operation sections that foll[...]

7 Important Technology Information Kontron User's Guide ETX CD 44 Automatic mode doe s not require any additional ha rd ware, software drivers, or interrupt handlin g routines. Note: With a proper ly designed thermal solution , the TCC is only active for very short periods, hence processor performance impact is expect ed to be so minor that it[...]

7 Important Technology Information Kontron User's Guide ETX CD 45 declares the temperature threshold the OS uses to deci de when t o start/stop active cooling de vices. See section ETX®-CD onboard Fan connectorf or more information about the ETX® -CD onboard Fan control. Passive Cooling The OS reduces the power consum ption of the processor [...]

7 Important Technology Information Kontron User's Guide ETX CD 46 7.5.2 Location and Pi nout of Fan connector J6 1 2 3 Pinou t[...]

7 Important Technology Information Kontron User's Guide ETX CD 47 7.5.3 BIOS Settings Feature Option Description Active Tri p Point Disabled 15 C 23 C … 55 C 63 C … 119 C This value co ntrols the temperatu re of the ACPI active trip po int - the point in which the OS will turn on the CPU fan (conne ctor on PCB). If DT S is ena bled only va[...]

7 Important Technology Information Kontron User's Guide ETX CD 48 7.5.5 Processor Clock Throttling The ACPI OS assesses the optimum CPU performance change necessary t o lower the temperature using the following equat ion: Δ P[%] = TC1(Tn-Tn-1) + TC 2(Tn-Tt) Δ P is the performance delta, Tt is the target temperature = passive coolin g trip po[...]

7 Important Technology Information Kontron User's Guide ETX CD 49 The following event resumes the system from S3: ® Power Button[...]

8 System Resources Kontron User's Guide ETX CD 50 8 System R esources 8.1 Interrupt Request (IRQ) Lines In 8259 PIC mode: IRQ # Used For Available Comment 0 Timer0 No 1 Keyboard No 2 Slave 8259 No 3 COM2 No Note (1) 4 COM1 No Note (1) 5 LPT2 Yes Note (2) 6 Floppy Drive Controller No Note (1) 7 LPT1 No Note (1) 8 RTC No 9 SCI No 10 COM3 Yes Not[...]

8 System Resources Kontron User's Guide ETX CD 51 In APIC mode: IRQ # Used For Available Available for PCI Comment 0 Timer0 No No 1 Keyboard No No 2 Slave 8259 No No 3 COM2 No Yes Note (1) 4 COM1 No Yes Note (1) 5 PCI/LPT2 Yes Yes Note (2) 6 Floppy Drive Controller No Yes Note (1) 7 LPT1 No Yes Note (1) 8 RTC No No 9 SCI No No System Control I[...]

8 System Resources Kontron User's Guide ETX CD 52 5 Yes 6 Yes 7 Yes 8.3 Memory Area Upper Memory Used for Available Comment C0000h – CFFFFh VGA BIOS No D0000h – DDFFFh Yes shadow RAM (ISA bus restriction) DE000h – DFFFFh USB registers No E0000h – FFFFFh System BIOS No 8.4 I/O Address Map The I/O-port addresses of the ETX®-CD are func [...]

8 System Resources Kontron User's Guide ETX CD 53 D2h Clock generator Do not use under any circumstances. 1 D4h Clock generator Do not use under any circumstances. 1 8.8 JILI-I2C Bus I2C Address Used For Available Comment JIDA-Bus-Nr. A0h JILI-EEPROM No EEPROM for JILI-Data 2 62h Brightness control No MAX536262 2[...]

9 Limitations Kontron User's Guide ETX CD 54 9 Limitations 9.1 ISA Bus Memory accesses are not supported on the ISA bus. I/ O accesses are only supporte d if they fall into on e of the 4 generic decode ranges provided by the chipset. If a p lugin ISA card is using re gisters in I/O space, this address range has to be enable d explic itely usin[...]

10 BIOS Operation Kontron User's Guide ETX CD 55 10 BIOS Operation The module is equipped with a Phoenix BIOS, which is located in an onboar d Flash EEPROM. The device has 8-bit access. Faster access (16 bit) is prov ided by the shadow RAM feature. You can update the BIOS using a Flash utility. 10.1 Determining the BIOS Version To determine th[...]

10 BIOS Operation Kontron User's Guide ETX CD 56 Legend Bar Use the keys listed in the legend bar on the bottom to make your selections or exit the current menu. The table below describes the legend keys and their altern ates. Key Function <F1> or <Alt-H> General Help window. <Esc> Exit menu. ← or → Arrow key Select a men[...]

10 BIOS Operation Kontron User's Guide ETX CD 57 10.3 BIOS Setup Menus 10.3.1 Info Screen[...]

10 BIOS Operation Kontron User's Guide ETX CD 58 10.3.2 Main Me nu Feature Option Description System Time [hh:mm:ss] <Tab>, <Shift-Ta b>, or <Enter > selects field System Date [mm-dd-yyyy] <Tab>, <Shi ft-Tab>, or <Enter> sele cts field Legacy Diskette A Disabled 360 kB 1.2 MB 720 kB 1.44 / 1 .25 MB 2.88 MB L[...]

10 BIOS Operation Kontron User's Guide ETX CD 59 IDE Channels Submenu Feature Option Description Type User Auto None ATAPI Removable CD-ROM IDE Removable Other ATAPI Multi-Sector Tr ansfers Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Specify the number of sectors per bl ock for multiple sect or transfers LBA Mode Control Disabled Enabled[...]

10 BIOS Operation Kontron User's Guide ETX CD 60 10.3.3 Advanced[...]

10 BIOS Operation Kontron User's Guide ETX CD 61 Advanced Chipset Control Feature Option Description Enable Memory Gap Enabled Disabled[...]

10 BIOS Operation Kontron User's Guide ETX CD 62 CPU Control CPU control detects which processor c ore is used and displays an additional s ubmenu with the detected processor core (yonah, merom, etc.). Feature Option Description Core Multi-P rocessing Enabled Disabled Enables and disables the 2nd CPU core Processor Power Management Enabled GV3[...]

10 BIOS Operation Kontron User's Guide ETX CD 63 Chipset control Feature Option Description Memory Th rottling Enabled Disabled Controls thr ottling and ba ndwidth lim iting for the 945 GME Clock generato r Default Program "Program" allows to enable/d isable manual change of Spread Sp ectrum and FSB PCI Clock Run Enabled Disabled If [...]

10 BIOS Operation Kontron User's Guide ETX CD 64 Integrated Video Feature Option Description IGD - Device 2 Auto Disabled IGD - Device 2, F unction 1 Auto Disabled DVMT 3.0 Mode Fixed DVMT Combo Selectes the mode of the DMBT gra phic memory allocation Pre-Allocate d Memory Size 1 MB 8 MB Sets the size of the pre-allocated gr aphics memory Tota[...]

10 BIOS Operation Kontron User's Guide ETX CD 65 ISA Options Feature Option Description ISA Bridge Enabled Disabled Enables/disabl es the ISA bridge 8 Bit I/O recove ry 3.5 SYSCLK 4.5 SYSCLK … 10.5 SYSCLK Sets the 8 Bit I/O recovery time 16 Bit I/O recovery 3.5 SYSCLK 4.5 SYSCLK … 7.5 SYSCLK Sets the 16 Bit I/ O recovery ti me Fast Mode En[...]

10 BIOS Operation Kontron User's Guide ETX CD 66 PCI/PNP Configuration Feature Option Description PNP OS insta lled Other Win95 Win98 WinMe Win2000 WinXP Selects the most used OS Reset Configuration Data No Yes "Yes" will clear the ESCD Option ROM Placement Disabled E000 Extension b y PFA Temporary Relo cation by PFA E000 Extension b[...]

10 BIOS Operation Kontron User's Guide ETX CD 67 PCI/PNP ISA UMB Re gion Exclusion Feature Option Description C000 - CBFF CC00 - CFFF D000 - D3FF D400 - D7FF D800 - DBFF DC00 - DFFF Available Reserved[...]

10 BIOS Operation Kontron User's Guide ETX CD 68 PCI/PNP ISA IRQ Re source Exclusion Feature Option Description IRQ 3 IRQ 4 IRQ 5 IRQ 7 IRQ 9 IRQ 10 IRQ 11 Available Reserved[...]

10 BIOS Operation Kontron User's Guide ETX CD 69 Cache Memory Feature Option Description Memory Cache Enabled Disabled Enables/disabl es the memory cache system Cache System BIOS area Cache setting for System BIOS area Cache Video BIOS area Write Protect uncached Cache setting for System BIOS area Cache Base 0-512k Cache Base 51 2k-640k Cache [...]

10 BIOS Operation Kontron User's Guide ETX CD 70 I/O Device Con figuratio n Feature Option Description Parallel A TA Enabled Disabled Enables/disabl es the PATA Pri mary I DE UD MA66/1 00 Enabled Disabled Enables/disabl es UDMA 66/100 modes Serial ATA Enabled Disabled Enables/disables SATA SATA Con troller Mod e Optio n Co mpatible Enhanced Co[...]

10 BIOS Operation Kontron User's Guide ETX CD 71 Lan Options Feature Option Description LAN Controller #1 Enabled Disabled Enables/disabl es the PATA Onboard LAN PXE ROM Enabled Disabled Enables/disables the LAN PXE boot ROM Enable WOL Enabl ed Disabled Enables/disables Wake o n LAN[...]

10 BIOS Operation Kontron User's Guide ETX CD 72 Super I/O Controller Options Feature Option Description Onboard LPT Auto Enabled Disabled Enables/disables the Parall el Port Serial Port A Enabled Disabled Auto Enables/disables serial port A ; Auto: will be initialize d when detecte d Base I/O address 3F8 2F8 Base I/O address of COM port A Int[...]

10 BIOS Operation Kontron User's Guide ETX CD 73 USB ports Feature Option Description USB Controller Enabled Disabled Enables/disabl es the USB controller USB UHCI Port 3 Enabled Disabled Enables/disables USB Port 3 (USB line 5 and 6, which are no t accessible) USB EHCI Enabled Disabled Enables/disables USB 2.0 support Legacy USB Su pport Enab[...]

10 BIOS Operation Kontron User's Guide ETX CD 74 Console Redirection Feature Option Description Console Disabled UCR COM A UCR COM B UCR COM C UCR COM D JRC, Auto Controls the se rial console redirecti on. N/A[...]

10 BIOS Operation Kontron User's Guide ETX CD 75 Keyboard Features S ubmenu Feature Option Description NumLock Auto On Off Selects Power-on state for NumLock Key Click Disabled Enabled Enables Key Clic k Keyboard auto-r epeat rate 30/sec 26.7/sec 21.8/sec 18.5/sec 13.3/sec 10/sec 6/sec 2/sec Selects key repeat rate Keyboard auto-r epeat delay [...]

10 BIOS Operation Kontron User's Guide ETX CD 76 Hardware Monitor[...]

10 BIOS Operation Kontron User's Guide ETX CD 77 Watchdog Settings Feature Option Description Mode Disabled Reset NMI Watchdog acti on Timeout 1sec 5sec 10sec 30sec 1min 5.5min 10.5min 30.5min Max. trig ger perio de Delay 1sec 5sec 10sec 30sec 1min 5.5min 10.5min 30.5min Time until wa tchdog time r starts to count[...]

10 BIOS Operation Kontron User's Guide ETX CD 78 Display Control Feature Option Description Display Mode CRT only LFP only CRT + LFP LFP + EFP CRT: Cath ode Ray T ube LFP: LVDS flat panel (JILI) EFP: Embe dded flat panel (sDVO ) Flat Panel Type VGA 1x18 SVGA 1x18 XGA 1x18 XGA 1x24 SXGA 2x18 SXGA 2x24 UXGA 2x18 Enter PAID Enter FPID Auto Select[...]

10 BIOS Operation Kontron User's Guide ETX CD 79 Miscellaneous Submenu Feature Option Description Summary Screen Disabled Extended Display system conf igurat ion at boot Dark Boot Disabled Enabled Prevent diagnostic sc reen output du ring boot Dark Boot Logo 0 1 Use -/+ to select th e Dark Boot logo 0 – Vendor Logo 1 – Blank screen Halt On[...]

10 BIOS Operation Kontron User's Guide ETX CD 80 10.3.4 Security Menu Feature Option Description Set Superv isor Pass word [a..z;0..9;+- #…] Allows to set Su pervisor Passwor d Clear All Passwords Clear Sup ervisor and Admi nistrative Password Password on boot Disabled Enabled Enables/Disable s passwor d for boot pr ocess Fixed Disk boot sec[...]

10 BIOS Operation Kontron User's Guide ETX CD 81 10.3.5 Power Menu Feature Option Description Enable ACPI No Yes En/Disable ACPI BIOS (A dvance Configuration and Power Interface) Enable ACPI _Sx state None S1 S3 S1+S3 This option allows to selec tively en able Sx standby states f or ACPI OS. Choo sing ‘None’ will force the OS to ha ve only[...]

10 BIOS Operation Kontron User's Guide ETX CD 82 CPU Thermal Control Circuit Feature Option Description Thermal Control Ci rcuit Disabled TM1 TM2 TM1 and TM2 Sets the mode of the Therma l Control C ircuit PROCHOT# Enable Enabled Disabled This function e ngages the Therma l Control Circuit when enabled DTS Enable Enabled Disabled Controls the D[...]

10 BIOS Operation Kontron User's Guide ETX CD 83 10.3.6 Boot Menu Feature Option Descpription Boot priority order 1:USB Key 2:USB CDROM 3:IDE CE 4:IDE 0 5:IDE 1 6:IDE 2 7:IDE 3 8: Excluded fr om boot orde r IDE 4 IDE5 USB FDC USB HDD USB ZIP USB LS120 PCI SCSI Keys used to view or co nfigure devi ces: Up and Down arrows sel ect a device. <+[...]

10 BIOS Operation Kontron User's Guide ETX CD 84 10.3.7 Exit Menu Feature Description Exit Saving Changes Exit System Se tup and sa ve your cha nges to CMOS. Exit Discarding Changes Exit utility with out saving Setu p data to CMOS. Load Optimize d Defaults Load custo mer specific default values Load Setup De faults Load default values for all [...]

10 BIOS Operation Kontron User's Guide ETX CD 85 10.4 Updating or Restoring BIOS Phoenix Phlash16 allows you to update or restore th e BIOS with a newer version or restore a corrupt BIOS by using a floppy dis k without having to install a new ROM chip. ® Get the Phoenix Phlash16 compressed f ile, CRDxMODB.ZIP, from the Kontron Embedded Module[...]

10 BIOS Operation Kontron User's Guide ETX CD 86 10.5 Preventing Problems When Up dating or Restoring BIOS Updating the BIOS represents a potential hazard. Po wer failure s or fluctuations that may occur dur ing updating the Flash ROM can damage the BIOS code, makin g the system unbootable. To prevent this potential hazard, many systems co me [...]

11 Appendix A: JIDA Stand ard Kontron User's Guide ETX CD 87 11 Appendix A: JID A S t andard Every board with an on-board BIOS e xtension su pports the following functi on calls, which supply information about the boar d. Jumptec Intelligent Device Architec ture (JIDA) functions are called via Interrupt 15h. Functions include: ® AH=Eah ® AL=[...]

12 Appendix B: PC Architec ture Information Kontron User's Guide ETX CD 88 12 Appendix B: PC Arc hitectur e Information The following sources of information can help you better understan d PC architecture. 12.1 Buses 12.1.1 ISA, Standard PS/2 – Connectors ® AT Bus Design: Eight and Si xteen-Bit ISA, E-ISA and EISA Design, Edward Solari, Ann[...]

12 Appendix B: PC Architec ture Information Kontron User's Guide ETX CD 89 ® The PC Handbook: For Engineers, Programme rs, and Other Serious PC Users, Sixth Edition, John P. Choisser and John O. Fost er, Annabooks, 1997, ISBN 0-92 9392-36-1 12.2 Ports 12.2.1 RS-232 Serial ® EIA  232  E standard ® The EIA-232-E standard specifies the i[...]

12 Appendix B: PC Architec ture Information Kontron User's Guide ETX CD 90 ® The Programmer’s PC Sourcebook, Sec ond Edition, Th om Hogan, Microsoft Press, 1991, ISBN 1-55615-3 21-X ® Undocumented PC, A Programmer’s Guide to I/O, CPUs, and Fixed Memory Areas, Frank van Gilluwe, Second Edition, A ddison-Wesley, 1997, ISBN 0-201-47950-8[...]

13 Appendix C: Document Revisi on Kontron User's Guide ETX CD 91 13 Appendix C: Document R evision Rev. Date Author Changes 0.3 17.04.07 UMA Created prelimin ary manual. 1.0 05.03.08 UMA Added power measurements, adde d BIOS setup notes, fixed sm all issues, added note at height specification, added chapter "Limitations"[...]