JVC 0902-NIC-JET manual

LCT1179-001A-H 0902-NIC-JET COLOUR TELEVISION INSTRUCTIONS Thank you for buying this JVC colour television. T o make sure you understand how to use your new TV , please read this manual thoroughly before you begin. A V -21W83 A V -25L83 A V -29W83 Contents Safety precautions 2 Preparation 3 1 Confirm which remote control you have ... 3 2 Insert the[...]

2 Safety pr ecautions W ARNING • T o prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV . • A void damaging the power cord and mains plug. When you unplug the TV , pull it out by the mains plug. Do not pull on the power cord. • Never block or c[...]

3 Prepar ation 1 Confirm which remote control you have Y our TV comes with one of the two r emote controls sho wn below . Functions you can operate differ depending on the type of r emote control. <RM-C1016> MUTING OFF TIMER ECO SENSOR PICTURE MODE CHANNEL SCAN SYSTEM COLOUR SOUND MENU CHANNEL RETURN+ POWER DISPLA Y TV/VIDEO VOLUME 123 456 78[...]

4 Prepar ation 3 Connecting the aerial and VCR • R ead the manuals provided with the de vices. Depending on the device , the connection method may be differ ent from the diagr ams. Also the device settings ma y need to change depending on the connection method. • T urn off all the devices including the TV . • Connecting cables are not supplie[...]

5 Prepar ation 4 Connecting other devices If you ar e not connecting any other de vices, skip step 4 and perform step 5. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When y ou connect the headphones, the TV speak ers go off. • The OUTPUT terminal outputs the video and sound signals which you ar e viewing on the TV . Y ou c[...]

6 Prepar ation 6 Initial setting When the TV is first turned on, it enter s the initial setting mode , and the JVC logo is display ed. F ollow the instructions on the on-screen displa y to perform the initial settings. 1 Press the Main power button on the TV . The PO WER lamp lights. After the JVC logo has been display ed, the TV automatically swit[...]

7 Basic operation • The illustration belo w is for the remote contr ol RM-C1 0 16 supplied with L83 and W83 series models. Y our remote contr ol may not look e x- actly like the illustr ations. MUTING OFF TIMER ECO SENSOR PICTURE MODE CHANNEL SCAN SYSTEM COLOUR SOUND MENU CHANNEL RETURN+ POWER DISPLA Y TV/VIDEO VOLUME 123 456 789 0 - / -- CINEMA [...]

8 Remote contr ol buttons and functions ECO SENSOR button Y ou can adjust this TV so that the screen automatically adjusts to the optimum contrast accor ding to the brightness of your room. This function r educes ey e strain and the pow er consumption of this TV . Press this button to select the desired mode. DIGIT AL ECO SENSOR DISPLA Y : The ECO [...]

9 Remote control buttons and functions button Y ou can select one of the two bilingual sounds in an A2 stereo pr ogramme ’ s bilingual progr amme . Press this button to select a bilingual sound. : Bilingual I (sub I) sound : Bilingual II (sub II) sound • The A2 Bilingual function has no effect on stereo progr ammes of the A2 stereo br oadcast p[...]

10 Remote control buttons and functions RETURN + button Y ou can set a channel you fr equently view to the R eturn Channel and you can view that channel at any time with one-touch. T o set the channel to the Return Channel: 1 Select the channel you want to set to the Return Channel. 2 Press this button and hold until the message “ RETURN PLUS PRO[...]

11 Using the TV’ s menus This TV has a number of functions you can oper ate using the menus. T o use all your TV ’ s functions fully , you need to under stand how to use the menus . 4 Press the MENU / buttons to change function settings. Example: MENU 2 AUTO SHUTOFF OFF CHILD LOCK OFF BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE[...]

12 Using the TV ’ s menus INPUT Y ou can view images fr om VCRs or other devices connected to y our TV . 1 Press MENU T to display the “ MENU 1 ” menu, then select “ INPUT ” . MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00 SELECT BY EXIT BY OPERATE BY -+ D ISPLAY 2 Press MENU / to select “ VIDEO- 1 ” , “ VIDEO-2 ” or “[...]

13 Using the TV ’ s menus AUTO SHUTOFF Y ou can set your TV to turn off if no signals are r eceived for about 15 minutes or longer after the end of a broadcast. 1 Press MENU T to display the “ MENU 2 ” menu, then select “ AUTO SHUTOFF ” . MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE BY [...]

14 Using the TV ’ s menus VIDEO-2 SET Set the VIDEO-2 SET correctly accor ding to the video signal input from the e xternal device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be display ed. 1 Press MENU T to display the “ MENU 2 ” menu, then select “ VIDEO-2 SET ” . MENU 2 AUTO SHUTOFF ON CHILD LOCK ON[...]

15 Using the TV ’ s menus MANUAL CH PRESET Y ou can manually preset desir ed TV channels to desired channels . 1 Press MENU T to display the “ MENU 3 ” menu, then select “ MANUAL CH PRESET ” . MENU 3 AUTO CH PRESET MANUAL CH PRESET LANGUAGE ENGLISH SELECT BY EXIT BY OPERATE BY -+ D ISPLAY 2 Press MENU / . The sub-menu is display ed. MANUA[...]

16 Using the TV ’ s menus SKIP Y ou can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons nor the CHANNEL SC AN button. • Channels to which TV channels hav e not been preset ar e automatically set to be skipped. 1 Press MENU T to display the “ MENU 3 ” menu, then select “ MANUAL C[...]

17 Using the TV ’ s menus Picture Adjustments Y ou can adjust the picture as y ou like . 1 Press MENU T to display the “ MENU 4 ” menu. MENU 4 TINT COLOUR BRIGHT CONT. SHARP SELECT BY EXIT BY OPERATE BY -+ D ISPLAY 2 Press MENU T to select an item and press MENU / to adjust it. TINT* - : R eddish + : Greenish COLOUR - : Lighter + : Deeper BRI[...]

18 TV buttons and parts Front <A V-29W83> 1 3 6 45 8 7 9 0 2 L/MONO VR IN (VIDEO-3) <A V -25L83> 12 3 4 5 7 8 9 0 <A V-2 1W83> IN (VIDEO-3) L/MONO VR MENU CHANNEL VOLUME EXIT POWER 4 5 3 1 2 7 8 9 0 1 Headphone jack 2 VIDEO-3 terminal 3 MENU button 4 CHANNEL m buttons 5 VOLUME m buttons 6 TV/VIDEO button 7 ECO sensor 8 Remote cont[...]

19 TV buttons and parts 1 VIDEO-1 INPUT terminal 2 COMPONENT (VIDEO-2) INPUT terminal 4 3 2 1 VIDEO -1 INPUT OUTPUT COMPONENT ( VIDEO-2 ) INPUT V MONO L / V Y / V L MONO L / C B RR R C R 3 OUTPUT terminal 4 Aerial socket Rear LCT1179-001A-H 02.7.29, 6:43 PM 19[...]

20 Using the buttons on the TV Basic operation • Check to make sur e the CHILD LOCK function is set to “ OFF ” . When the CHILD LOCK function is set to “ ON ” , the TV cannot be operated using the front control buttons . F or details, see “ CHILD LOCK ” on page 13. 1 Press CHANNEL M to turn the TV on from standby mode. 2 Press CHANNEL[...]

21 T roubleshooting If there is no pictur e or the TV does not operate normally , make sure the pr oblem isn ’ t due to the reasons indicated belo w . If the problem per sists ev en after taking the measures indicated, please contact a service technician. Cannot turn the TV on • Press the Main po wer button on the TV . • Connect the pow er co[...]

22 Specifications TV RF systems B, G Colour systems P AL, SECAM (NTSC 3.58/4.43 in VIDEO mode only) Channel and frequencies VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output VIDEO-1: VIDEO input, AUDIO L/R input VIDEO-2/COMPONENT : VIDEO input, AUDIO [...]

COLOUR TELEVISION INSTRUCTIONS Thank you for buying this JVC colour television. T o make sure you understand how to use your new TV , please read this manual thoroughly before you begin. A V -21W93 A V -25L93 A V -29W93 A V -21W93B A V -25L93B A V -29W93B Contents Safety precautions 2 Preparation 3 1 Confirm which re mote control you have ... 3 2 I[...]

2 Safety pr ecautions W ARNING • T o prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV . • A void damaging the power cord and mains plug. When you unplug the TV , pull it out by the mains plug. Do not pull on the power cord. • Never block or c[...]

3 Prepar ation 1 Confirm which remote control you have Y our TV comes with one of the four remote contr ols shown belo w . Functions y ou can operate differ depending on the type of r emote control. <RM-C1011> <RM-C1012> MUTING OFF TIMER ECO SENSOR PICTURE MODE CHANNEL SCAN SYSTEM COLOUR SOUND MENU CHANNEL RETURN+ POWER DISPLA Y TV/VIDE[...]

4 Prepar ation 3 Connecting the aerial and VCR • R ead the manuals provided with the de vices. Depending on the device , the connection method may be differ ent from the diagr ams. Also the device settings ma y need to change depending on the connection method. • T urn off all the devices including the TV . • Connecting cables are not supplie[...]

5 Prepar ation 4 Connecting other devices If you ar e not connecting any other de vices, skip step 3 and perform step 4. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When y ou connect the headphones, the TV speak ers go off. • The OUTPUT terminal outputs the video and sound signals which you ar e viewing on the TV . Y ou c[...]

6 DISPLAY button MENU t buttons MENU buttons POWER lamp Main power button CINEMA SURROUND Ι / ΙΙ OFF TIMER ECO SENSOR SYSTEM COLOUR SOUND MENU DISPLA Y TV/VIDEO 123 456 / Prepar ation 6 Initial setting When the TV is first turned on, it enter s the initial setting mode , and the JVC logo is display ed. F ollow the instructions on the on-screen d[...]

7 Basic operation • The illustration belo w is for the remote contr ol RM-C1 0 12 supplied with W93B and L93B series models. Y our remote contr ol may not look ex- actly like the illustr ations. - / -- MUTING BASS OFF TIMER ECO SENSOR PICTURE MODE CHANNEL SCAN SYSTEM COLOUR SOUND MENU CHANNEL RETURN+ POWER DISPLA Y TV/VIDEO VOLUME 123 456 789 0 C[...]

8 Remote contr ol buttons and functions ECO SENSOR button Y ou can adjust this TV so that the screen automatically adjusts to the optimum contrast accor ding to the brightness of your room. This function r educes ey e strain and the pow er consumption of this TV . Press this button to select the desired mode. DIGIT AL ECO SENSOR DISPLA Y : The ECO [...]

9 Remote control buttons and functions button Y ou can select a sound setting for stereo broadcast pr ogrammes and bilingual progr ammes. Press this button to select a sound setting. : Stereo sound : Bilingual I (sub I) sound : Bilingual II (sub II) sound : Monaural sound MONO : Cancels the multi-sound function, and the sound becomes monaural. • [...]

10 Remote control buttons and functions CHANNEL SCAN button Y ou can quickly view all TV channels progr ammes that you can vie w on your TV , and search for the pr ogramme y ou want to view . 1 Press this button to start scanning TV channels. The TV channel progr ammes are each display ed for sev eral seconds . • The progr ammes of TV channels fo[...]

11 Using the TV’ s menus This TV has a number of functions you can oper ate using the menus. T o use all your TV ’ s functions fully , you need to under stand how to use the menus . 4 Press the MENU / buttons to change function settings. Example: MENU 2 AUTO SHUTOFF OFF CHILD LOCK OFF BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE[...]

12 Using the TV ’ s menus INPUT Y ou can view images fr om VCRs or other devices connected to y our TV . 1 Press MENU T to display the “ MENU 1 ” menu, then select “ INPUT ” . MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00 SELECT BY EXIT BY OPERATE BY -+ D ISPLAY 2 Press MENU / to select “ VIDEO- 1 ” , “ VIDEO-2 ” or “[...]

13 Using the TV ’ s menus AUTO SHUTOFF Y ou can set your TV to turn off if no signals are r eceived for about 15 minutes or longer after the end of a broadcast. 1 Press MENU T to display the “ MENU 2 ” menu, then select “ AUTO SHUTOFF ” . MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE BY [...]

14 Using the TV ’ s menus Picture Adjustments Y ou can adjust the picture as y ou like . 1 Press MENU T to display the “ MENU 4 ” menu. MENU 4 TINT COLOUR BRIGHT CONT. SHARP SELECT BY EXIT BY OPERATE BY -+ D ISPLAY 2 Press MENU T to select an item and press MENU / to adjust it. TINT* - : R eddish + : Greenish COLOUR - : Lighter + : Deeper BRI[...]

15 Using the TV ’ s menus AI VOLUME Y ou can pre vent the sudden incr ease or decrease of v olume that occurs when changing channels or switching VIDEO modes. 1 Press MENU T to display the “ MENU 5 ” menu, then select “ AI VOLUME ” . MENU 5 BASS TREBLE BALANCE AI VOLUME ON SELECT BY EXIT BY OPERATE BY -+ D ISPLAY 2 Press MENU / to select [...]

16 Using the TV ’ s menus MANUAL CH PRESET Y ou can manually preset desir ed TV channels to desired channels . 1 Press MENU T to display the “ MENU 3 ” menu, then select “ MANUAL CH PRESET ” . MENU 3 AUTO CH PRESET MANUAL CH PRESET LANGUAGE ENGLISH SELECT BY EXIT BY OPERATE BY -+ D ISPLAY 2 Press MENU / . The sub-menu is display ed. MANUA[...]

17 Using the TV ’ s menus SKIP Y ou can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons nor the CHANNEL SC AN button. • Channels to which TV channels hav e not been preset ar e automatically set to be skipped. 1 Press MENU T to display the “ MENU 3 ” menu, then select “ MANUAL C[...]

18 Attaching the T win Port Bass Blaster Unit <A V -2 1W93B/A V -25L93B/A V -29W93B only> The T win P ort Bass Blaster Unit is packaged together with the TV . Before you use the TV , mount the T win P ort Bass Blaster unit correctly on the TV . Note: • The B ASS functions do not work unless the T win P ort Bass Blaster Unit is connected cor[...]

19 TV buttons and parts Front <A V -29W93/A V -29W93B> 1 3 6 45 8 7 9 0 2 L/MONO VR IN (VIDEO-3) <A V -25L93/A V -25L93B> 12 3 4 5 7 8 9 0 <A V -2 1W93/A V -2 1W93B> IN (VIDEO-3) L/MONO VR MENU CHANNEL VOLUME EXIT POWER 4 5 3 1 2 7 8 9 0 1 Headphone jack 2 VIDEO-3 terminal 3 MENU button 4 CHANNEL m buttons 5 VOLUME m buttons 6 TV/[...]

20 TV buttons and parts 1 VIDEO-1 INPUT terminal 2 COMPONENT (VIDEO-2) INPUT terminal 4 3 2 1 VIDEO -1 INPUT OUTPUT COMPONENT ( VIDEO-2 ) INPUT V MONO L / V Y / V L MONO L / C B RR R C R 3 OUTPUT terminal 4 Aerial socket Rear LCT1173-29W93-E7 02.7.29, 11:52 AM 20[...]

21 Using the buttons on the TV Basic operation • Check to make sur e the CHILD LOCK function is set to “ OFF ” . When the CHILD LOCK function is set to “ ON ” , the TV cannot be operated using the front contr ol buttons. F or details, see “ CHILD LOCK ” on page 13. 1 Press CHANNEL M to turn the TV on from standby mode. 2 Press CHANNEL[...]

22 T roubleshooting If there is no pictur e or the TV does not operate normally , make sur e the problem isn ’ t due to the reasons indicated belo w . If the problem per sists ev en after taking the measures indicated, please contact a service technician. Cannot turn the TV on • Press the Main po wer button on the TV . • Connect the pow er co[...]

23 Specifications TV RF systems B, G, I, D, K, K1, M Colour systems P AL, SECAM, NTSC 3.58 MHz/NTSC 4.43 MHz Channel and frequencies VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output VIDEO-1: VIDEO input, AUDIO L/R input VIDEO-2/COMPONENT : VIDEO inpu[...]

LCT1173-29W93-E7_cover 02.7.29, 11:42 AM 2[...]