JVC HD-52G587 manual

Important Note: In the spaces below , enter the model and serial number of your monitor (located at the rear of the monitor cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user ’s guide in a convenient place for future reference. Keep the carton and original packaging for future use. LCT2065-001B-A 1206[...]

2 Important Safety Precautions W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APP ARA TUS TO RAIN OR MOISTURE. CAUTION: TO INSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the power source specified on the unit. 2. A void damaging the AC plug and power cord. 3. Avoid Improper[...]

3 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat[...]

4 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way , such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has[...]

5 W arnings Caring for the Cabinet Caring for the Screen Normally , light dusting with a soft, non-scratching duster will keep your monitor clean. If you wish to wipe down the monitor , first unplug it. Then wipe gently with a soft cloth, slightly moistened with water . Y ou can add a few drops of mild liquid detergent to the water to help remove s[...]

6 Thank you for purchasing a JVC HDTV -ready projection monitor which uses the high-quality HD-ILA projection system. This is one of the highest quality and most technologically advanced monitor available today . It is recommended that you read this instruction manual before using your monitor in order to learn about it’s many features. Cautions [...]

7 4. The monitor requires a lot of electrical power It is recommended that the monitor is connected directly to the wall socket, and not to another device. When connecting the monitor to a wall socket that is being used by another device, or when using an extension cord, be careful not to exceed the electrical capacity of the socket. Do not turn th[...]

8 T able of Contents Important Safety Precautions . . 2 W arnings . . . . . . . . . . . . . . . 5 Quick Setup . . . . . . . . . . . . . . 9 Unpacking your monitor . . . . . . . . . 9 Monitor models . . . . . . . . . . . . . 10 Remote Control . . . . . . . . . . . . 12 Getting Started . . . . . . . . . . . . . 13 The Remote Control . . . . . . . . .[...]

9 AA Batteries x 2 Monitor x 1 Remote Control x 1 Note: Y our monitor and/or remote control may differ from the examples illustrated here. Quick Setup Thank you for your purchase of a JVC projection monitor . Before you begin setting up your new monitor , please check to make sure you have all of the following items. In addition to this guide, your[...]

10 OVER LICENSED UNDER THE FOLLOWING U.S. P ATENTS 6,183,091 6,419,362 INPUT -3 PC IN (D-SUB) INPUT -1 INPUT -2 INPUT -3 HDMI 1 INPUT -1 INPUT -2 VIDEO VIDEO VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L Y Pb Pr Y Pb Pr S-VIDEO S-VIDEO OVER R L AUDIO OUTPUT 1 DIGIT AL-IN Quick Setup Before you connect your monitor to another device,[...]

11 Quick Setup Side Panel Diagram VOLUME INPUT 4 OPERA TE + – MENU VIDEO L/MONO R AUDIO INPUT Front Panel Diagram POWER LAMP POWER LAMP LAMP LED POWER BUTTON POWER LED • For information on the LED, see page 65. LCT2065-001B-A ENG.indd 11 LCT2065-001B-A ENG.indd 11 12/18/06 10:10:52 AM 12/18/06 10:10:52 AM[...]

12 Quick Setup RM-C1273G • For information on remote control buttons, see pages 52 - 60. • The " * " button can not be used for monitor model HD-52G587 and HD-61G587. POWER DISPLA Y SLEEP TIMER LIGHT FREEZE THEA TER PRO VIDEO ST ATUS 1 7 4 * 3 9 6 SET MUTING MENU OK BACK 2 8 0 5 CH + VOL – VOL + REC OPEN/CLOSE STILL/P AUSE STOP P AU[...]

13 These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new monitor right away . If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Before you can operate your remote control, you first need to install the batt[...]

14 Notes: • These connections are examples. • After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the monitor . • T o connect a DVD player , see VCR Connection. A DVD player is optional • If you have a satellite monitor system, refer to the satellite monitor manual. Used to make vide[...]

15 Quick Setup Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user ’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before start[...]

16 Diagram #2 Green Monitor Rear Panel OVER INPUT -1 INPUT -2 INPUT -3 HDMI 1 INPUT -1 INPUT -2 VIDEO VIDEO VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L Y Pb Pr Y Pb Pr S-VIDEO S-VIDEO OVER AUDIO OUT R L Y P B P R VIDEO OUT DVD Player (Optional) Blue Red Quick Setup LCT2065-001B-A ENG.indd 16 LCT2065-001B-A ENG.indd 16 12/18/06 10:[...]

17 Quick Setup 1) Connect a yellow composite cable from the camcorder VIDEO OUT , into the VIDEO IN on the side of the monitor . 2) Connect a white cable from the camcorder LEFT AUDIO OUT , into the LEFT AUDIO IN on the side of the monitor . 3) Connect a red cable from the camcorder RIGHT AUDIO OUT , into the RIGHT AUDIO IN on the side of the monit[...]

18 By connecting a Digital TV Receiver , high definition pictures can be displayed on your monitor in their digital form. 1 DIGITAL-IN HDMI 1 R - AUDIO - L HDMI to DVI Cable After the connections have been made, tighten the screw to secure the cables. DTV device Digital Out Audio Out L R Connecting to a Digital TV Receiver 1) Connect the HDMI to DV[...]

19 By connecting an HDMI compatible device, high definition pictures can be displayed on your monitor in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible devices. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface. HDMI provides and [...]

20 Quick Setup By connecting your A V Receiver to your monitor's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your monitor . This allows you to free up the other input connections so you can connect more devices to your monitor . Connecting to an A V R[...]

21 This monitor can be used as a computer screen. Use a commercially available D-SUB cable to connect the monitor's PC INPUT terminal to the computer's analog RGB output terminal. If you want to listen to the sound from the computer , use a commercially available RCA cable to connect the INPUT -3 audio input terminal to the computer'[...]

22 Quick Setup T able of signals for each type of computer Resolution 640 x 480 (VGA) 1024 x 768 (XGA) V ertical Frequency (Hz) 60.0 60.0 Horizontal Frequency (kHz) 31.5 48.4 When a picture is not displayed With some computers, some problems can be solved by changing the settings. Check the computer's refresh rate and set it to 60Hz. Computers[...]

23 When you turn your monitor on for the first time the interactive plug-in menu will appear . The plug-in menu helps you to get your monitor ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear . • Setting the monitor ’s clock to the correct time so your timer functions will work[...]

24 Before you use any of your monitor ’s timer functions, you must first set the clock. √ ® T o set the hour † T o minute √ ® T o set the minute † T o ST ART CLOCK Clock Set Note: • Y ou will have to reset the clock after a power interruption. Y ou must set the clock before operating any timer functions. Quick Setup SET CLOCK SELECT O[...]

25 Y ou can program your remote to operate your cable box, satellite receiver , VCR or DVD player by using the instructions and codes listed below . If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer . The remote control is programmed with cable box [...]

26 The remote control is programmed with VCR codes for power on/off, play , stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below . 2) Slide the first 2-way selector switch to “MONITOR” and the other 2-way selector switch to “VCR”. 3) Press and hold down the D ISPLA Y [...]

27 The remote control is programmed with DVD codes for power on/off, play , stop, fast-forward, rewind, previous/next chapter , tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below . 2) Slide the first 2-way selector switch to “MONITOR” and the other 2-way selector switch to “DVD”. 3) P[...]

28 Cable/Satellite Search Codes Function 1) Slide the first 2-W ay Mode Selector switch to CA TV . 2) Press the P OWER and S ET buttons. Hold for at least three seconds and release. 3) Press the P OWER button on the remote, and see if the cable or satellite box responds. 4) If there was a response, press S ET . The codes are now set. If there was n[...]

29 T o bring up the onscreen menu , press the M ENU button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the monitor ’s side panel instead of the remote, an additional menu screen showing VIDEO ST A TUS and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST . The “int[...]

30 Y our monitor comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your monitor ’s operation simply and quickly . Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. For information about the interactive plug-in Menu, see pages 23 - 2[...]

31 TINT COLOR PICTURE BRIGHT DET AIL PICTURE ADJUST SELECT OPERA TE EXIT MENU NEXT P AGE PREVIOUS 00 00 00 00 00 ST ANDARD (1/3) PICTURE ADJUST 01 SELECT OPERA TE EXIT MENU NEXT P AGE PREVIOUS ST ANDARD PICTURE ADJUST (2/3) COLOR TEMPERA TURE COLOR MANAGEMENT DYNAMIC GAMMA SMART PICTURE NA TURAL CINEMA LOW ON ON ON ON PICTURE ADJUST 02 BASS TREBLE [...]

32 Onscreen Menus V -Chip Y ou can customize the V -Chip settings of your monitor to match your personal tastes. The V -Chip menu below is the starting point for your V -Chip settings Y ou can use US V -Chip settings (for programming broadcast from the United States), Canadian V -Chip settings (for programming broadcast from Canada), and movie rati[...]

33 Y ou can block programs that are not rated. Press the M ENU button π † T o V -CHIP √ ® T o operate (The lock icon appears) Press Z ERO to access V -Chip setup options π † T o UNRA TED √ ® T o VIEW or BLOCK Press M ENU when done Directions to Block Unrated Programs Onscreen Menus Unrated Programs Unrated programming refers to any prog[...]

34 U.S. P ARENT AL RA TING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6. ❒ TV Y7 is for Older Children Most parents would find such programs suitable for children 7 an[...]

35 Onscreen Menus Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the π † or √ ® to move the cursor to the correct location. Press O K to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”. For example. T o block viewing of all TV 14 shows, move[...]

36 Onscreen Menus ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MP AA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released. NR (Not Rated) Programming may contain all types of programming including ch[...]

37 Press the M ENU button π † T o V -CHIP √ ® T o operate (lock icon appears) Press Z ERO to access V -Chip setup options π † T o SET CANADIAN RA TINGS ENG (for English) √ ® T o enter ratings menu For example: T o block viewing of programming rated 14+ shows, move the cursor to the 14+ column and add a lock icon. Once you've put a [...]

38 V -Chip settings are protected by a four-digit lock code. Y our monitor comes preset with a lock code of “0000”. Y ou may change the code to any four-digit number you wish. T o change the lock code, follow the steps below . Press the M ENU button π † T o SET LOCK CODE √ ® T o operate (lock icon appears) Press Z ERO to access the lock c[...]

39 Onscreen Menus The language function is described on page 23 as the interactive plug-in menu. If you need to choose the language again, follow the steps below . Press the Menu button π † T o LANGUAGE √ ® T o choose a language: ENG. (English), FRAN. (French) or ESP . (Spanish) Press the M ENU button when finished Language INITIAL SETUP SELE[...]

40 Onscreen Menus This function automatically shuts off your monitor when there is no signal from the input the monitor is on. Press the M ENU button π † T o AUT O SHUT OFF √ ® T o turn ON or OFF Press the M ENU button when finished • If the input that you have on does not receive a signal for more than one minute, the blinking text “NOT [...]

41 Onscreen Menus This allows you to lock the keys on the side of the monitor , so that a child may not accidentally change your viewing preferences. Press the M ENU button π † T o FRONT P ANEL LOCK √ ® T o turn ON or OFF Press the M ENU button when finished Front Panel Lock Y ou can turn off this feature in the following ways: • Unplug the[...]

42 Onscreen Menus This function is used to label video input connections for the onscreen displays. Press the M ENU button π † T o VIDEO INPUT LABEL √ ® T o enter π † T o select the desired video input √ ® T o select the desired preset input label (see chart below) Press the OK button to save Press the M ENU button when finished INITIAL[...]

43 Onscreen Menus Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama or cinema. Press the M ENU button π † T o POSITION ADJUSTMENT √ ® T o enter π † T o adjust the position Press the M ENU button to finish Notes: • T o reset the adjustment to the center , press[...]

44 Onscreen Menus This feature is used if you have a DTV or HDMI compatible component connected to your monitor . Press the M ENU button π † T o DIGIT AL-IN AUDIO √ ® T o select ANALOG, DIGIT AL or AUTO Press the Menu button when fi nished Notes: • If you connect the HDMI device to the HDMI 1, choose DIGIT AL. If you connect the DVI device[...]

45 Press the M ENU button π † T o TINT , COLOR, PICTURE, BRIGHT or DET AIL √ ® T o enter √ ® T o adjust the setting π † T o move to the next setting Press the M ENU button when finished These settings allow you to change and adjust the way the picture appears on your monitor . TINT T int allows you to adjust the levels of red and green [...]

46 Onscreen Menus Color Management This monitor supports the COLOR MANAGEMENT function to ensure dull colors are compensated to produce natural hues. Press the M ENU button π † T o COLOR MANAGEMENT √ ® T o enter π † T o select the mode “ON" or "OFF" Press the M ENU button when finished COLOR MANAGEMENT ON OFF Dynamic Gamma[...]

47 Onscreen Menus Natural cinema corrects the problem of blurred edges which may occur when viewing a program originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges of these programs, choose N A TURAL C INEMA and set it to AUTO. Natural Cinema helps correct conversion errors that occur when film, which i[...]

48 Onscreen Menus This function effects the block noise removal and mosquito NR (Noise Reduction) simultaneously . Press the M ENU button π † T o MPEG NR √ ® T o enter π † T o select ON or OFF . Press the M ENU button when finished Note: • MPEG NR is effective for digital broadcasting. However , in case broadcasted signal is reformatted [...]

49 These settings allow you to change and adjust the sound on your monitor . BASS – Y ou can increase or decrease the level of low-frequency sound in the monitor ’s audio with the bass adjustment. TREBLE – Use treble to adjust the level of high-frequency sound in your monitor ’s audio. BALANCE – Adjust the level of sound between the monit[...]

50 Onscreen Menus Set Clock The set clock function is described on page 24 as the interactive plug-in menu. If you need to set the clock again, follow the steps below . Press the M ENU button π † T o SET CLOCK √ ® T o enter √ ® T o set the hours π † T o move to minutes √ ® T o set the minutes Press O K to start clock Press the M ENU [...]

51 The lamp replacement message will appear when you need to change the lamp. After you replace the lamp, you need to reset the timer which is built into your monitor . Press the M ENU button π † T o LAMP TIMER RESET √ ® T o Enter The following message will appear . Press the OK button while the above message appears on the monitor screen. Th[...]

52 Button Functions Y our monitor has a type of screen: TWIN (2 inputs). Multi Screen Function Note: After you press any multiscreen buttons, if you press the menu button, only the picture adjust screen will appear . T win Activate the split-screen option by pressing T WIN on the remote control. The input you were watching before pressing T WIN wil[...]

53 Button Functions Y ou can exchange the input displayed in the split screen window for the main screen image by pressing the SW AP button. Note: • It will only work in TWIN mode. Freeze Swap With SELECT , you can select the picture while viewing TWIN screen. When you press S ELECT button, the input number on the top will be highlighted. Each pr[...]

54 Button Functions T urns the monitor on or off. Press the P OWER button Note: • After turning the power on, you can not turn the power off for about one minute. Power Use the number buttons on the remote control to input the password for V -Chip. Number Buttons - 10Key Pad Set Selects the signal input source for the monitor: VIDEO-1, 2, 3, 4 or[...]

55 Button Functions By pressing the S OUND button, you can change the A.H.S.+ (Advanced Hyper Surround plus) mode, A.T .C. (Advanced T one Correction), SMART SOUND and HYPER BASS on or off. A.H.S.+ - Adds a more spacious surround sound. Music gives basic effect and movie for more effect. A.T .C. - Reproduces distinctive sounds with tone correction.[...]

56 Button Functions The V IDEO S T A TUS button gives you a choice of four monitor picture display settings, including a display of your own preferences. Standard - Resets the picture display to the factory settings. Dynamic - Gives a vivid picture with better contrast when viewing in a brightly lit room. Theater - Gives a rich, film-like look to v[...]

57 Button Functions The display screen shows the current status of timers, inputs and XDS ID. Press the D ISPLA Y button The screen to the right shows the following information: • The current A V input • The current time (12:20 pm) • Sleep timer status/minutes remaining (The Sleep T imer is off) • Each Press of the D ISPLA Y button changes [...]

58 Button Functions This feature will help you adjust the picture you are watching to give you the best possible picture quality . REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen. The 4:3 picture will fill the screen from [...]

59 Button Functions When you change the aspect ratios, it is different from their broadcast or recorded program. Aspect Ratios (Continued) Press the A SPECT button • By pressing the A SPECT button, you can change the size. ASPECT P ANORAMA CINEMA FULL REGULAR ASPECT P ANORAMA ZOOM CINEMA ZOOM FULL Notes: • Y ou can also choose the size by press[...]

60 Button Functions Use either the monitor ’s operation or a cable box to select. Set this switch to MONIT OR to operate the monitor . Move the switch to CA TV to operate a cable box. Note: • See page 25 for information on programming your remote for cable box operation. Y ou can control a VCR or DVD player with the buttons on the lower part of[...]

61 Lamp Replacement Changing the Lamp W ARNING! It is very important that you NEVER TOUCH THE GLASS SURF ACE OF THE NEW LAMP . T ouching the glass surface will deposit oils from your hand onto the lamp surface. When the lamp heats up to its operating temperature, the oil will cause a difference in temperature on the lamp surface that will likely ca[...]

62 Lamp Replacement Lamp Message If this message appears when you turn the monitor on, you need to replace the lamp. See page 63 on how to replace the lamp. Note: • This message will appear every time you turn on the monitor when the lamp needs to be replaced. Press the OK button to make the message disappear , or replace the lamp. LAMP NEEDS TO [...]

63 Lamp Replacement How to Replace the Lamp Please read these instructions fully before attempting to replace the lamp. If you feel unsure about replacing the lamp yourself, call a service technician. Please observe all safety warnings. 1) T urn off the monitor . Press the POWER button on the remote control or monitor front panel. W ait until the p[...]

64 Lamp Replacement W ARNING! Remember it is very important that YOU DO NOT T OUCH THE LAMP SURF ACE. Please read the warnings on page 61 again. Also, replace the lamp with part number TS-CL1 10U only! The monitor is designed to work specifically with this lamp. Lamps other than TS-CL1 10U may cause malfunctions and/or other damage to the monitor .[...]

65 While the power is on, and there is a problem with the monitor , the monitor changes to warning mode and informs you of the problem using the LED as follows. Then, the power turns of f automatically and performs the cooling for approximately 90 seconds. The LAMP LED blinks Condition: It may be a malfunction of the internal electrical circuits. T[...]

66 T roubleshooting There is no power There is no picture or sound The power turns off by itself The clock is wrong The color quality is poor There are lines across the picture Screen is 80% black Remote control is not operating properly or at all • See if the power cord became unplugged. • Check for a blown fuse or circuit breaker or a power o[...]

67 T roubleshooting The following are not malfunctions. • The monitor may make a creaking sound if the temperature of the room or the temperature inside the monitor changes. If there is no problem with the screen or sound, then there is no need to worry . • The lamp may make a noise when it blows, but this is not dangerous. • The lamp may mak[...]

68 HD-ILA Device Projection T ype Video Format Power Source Power Consumption Model SD (NTSC, 480i, 480p), HD (1080i, 720p) AC 120V , 60 Hz 180W 1 10W High-Pressure Mercury Lamp Screen Size 52 inch / 132 cm measured diagonally , 16:9 ratio Speakers 10 cm round X 2 Audio Output Full Range - 10W + 10W 48 1/2 x 35 7/8 x 16 3/8 122.9 x 91.1 x 41.5 Remo[...]

69 LCT2065-001B-A ENG.indd 69 LCT2065-001B-A ENG.indd 69 12/18/06 10:11:15 AM 12/18/06 10:11:15 AM[...]

70 LCT2065-001B-A ENG.indd 70 LCT2065-001B-A ENG.indd 70 12/18/06 10:11:15 AM 12/18/06 10:11:15 AM[...]

71 Notes LCT2065-001B-A ENG.indd 71 LCT2065-001B-A ENG.indd 71 12/18/06 10:11:15 AM 12/18/06 10:11:15 AM[...]

JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 LCT2065-001B-A ENG.indd 72 LCT2065-001B-A ENG.indd 72 12/18/06 10:11:15 AM 12/18/06 10:11:15 AM[...]