Ir a la página of
manuales de instrucciones parecidos
-
Home Theater System
JVC TH-A75R
76 páginas 2.79 mb -
Home Theater System
JVC TH-D5
38 páginas 3.64 mb -
Home Theater System
JVC SP-THM303S
48 páginas 3.7 mb -
Home Theater System
JVC 1080p
7 páginas 0.41 mb -
Home Theater System
JVC GVT0150-008UN
97 páginas 4.81 mb -
Home Theater System
JVC TH-F3
68 páginas 4.71 mb -
Home Theater System
JVC TH-S2
44 páginas 2.47 mb -
Home Theater System
JVC TH-A75
76 páginas 2.81 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones JVC RX-F31S. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica JVC RX-F31S o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual JVC RX-F31S se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales JVC RX-F31S, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones JVC RX-F31S debe contener:
- información acerca de las especificaciones técnicas del dispositivo JVC RX-F31S
- nombre de fabricante y año de fabricación del dispositivo JVC RX-F31S
- condiciones de uso, configuración y mantenimiento del dispositivo JVC RX-F31S
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de JVC RX-F31S no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de JVC RX-F31S y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico JVC en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de JVC RX-F31S, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo JVC RX-F31S, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual JVC RX-F31S. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
English LVT1306-009B [US] RX-F31S INSTR UCTIONS HOME CINEMA CONTROL CENTER cover_RX-F31S[US]ff.p65 05.6.9, 17:01 3[...]
-
Página 2
G-1 RX-F31S W arnings, Cautions, and Other s / Caution–– STANDBY/ON button! Disconnect the mains plug to shut the power off completely . The ST ANDBY/ON button in an y position does not disconnect the mains line. The power can be remote controlled. CA UTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remov e screws, cov ers o[...]
-
Página 3
1 English Ta b le of Contents Pa r ts identification ................................................ 2 Getting started ...................................................... 4 Before Installation .................................................................. 4 Checking the supplied accessories ....................................... 4 Putting [...]
-
Página 4
2 English SET HOME CINEMA CONTROL CENTER REMOTE CONTR OL RM - SRXF31U 4 2 t 3 1 5 9 8 7 q w e r u y i o p 6 Remote control See pages in parentheses f or details. 1 TV DIRECT button (14) 2 Source selecting buttons (12, 14, 32, 33) D VR/D VD , VCR, DBS , TV , D VD MUL TI, FM/AM 3 Operating buttons f or tuner (32, 33) ( TUNING, FM MODE, TUNING 9 , MEM[...]
-
Página 5
3 English Front panel 1 ST ANDBY/ON button and standby lamp (12, 14, 32) 2 Source lamps D VD MUL TI, D VR/D VD , VCR, DBS , TV , FM/AM 3 • SOURCE SELECT OR (12, 14, 33) • MUL TI JOG (18, 26, 33, 39) 4 MASTER VOLUME control (13) 5 PHONES jack (13) 6 TV DIRECT button (14) 7 SETTING button (18, 32) 8 ADJUST button (26, 32) 9 SURROUND b utton (39) [...]
-
Página 6
4 English Putting batteries in the remote control Before using the remote control, put tw o supplied batter ies first. 1 Press and slide the battery cover on the bac k of the remote control. 2 Insert batteries. Make sure to match the polarity: (+) to (+) and (–) to (–). 3 Replace the cover . If the range or eff ectiveness of the remote control [...]
-
Página 7
5 English 110V 127V 220V 230 - 240V ANTENNA AM LOOP AM EXT COAXIAL FM 75 ANTENNA Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. Connecting the FM and AM antennas Do not connect the A C power plug to the wall outlet until all connections are completed. AM loop antenna (supplied) If AM reception is poor, connect[...]
-
Página 8
6 English LR LS RS SB C SW 110V 127V 220V 230 - 240V CAUTION:SPEAKER IMPEDANCE 6 – 16 CENTER SURROUND SURROUND BACK SPEAKERS LEFT RIGHT LEFT RIGHT FRONT LINK- III OUT SUB- WOOFER AV COMPU Connecting the speakers T urn off all components before making connections. 1 T wist and remove the insulation at the end of eac h speaker cord. 2 Press and hol[...]
-
Página 9
7 English This receiver is equipped with the f ollowing video terminals— composite video , S-video, and component video terminals. • If your video components ha ve S-video (Y/C-separation) and/or component video (Y , P B , P R ) jacks , connect them using an S- video cable (not supplied) or component video cab le (not supplied). By using these [...]
-
Página 10
8 English 110V 127V 220V 230 - 240V VIDEO VCR OUT (REC) Y P B P R MONITOR OUT DVR/DVD IN VCR IN COMPONENT DVR/DVD IN (PLAY) DVR OUT (REC) S-VIDEO VCR OUT (REC) DVR OUT (REC) DVR/DVD IN (PLAY) AUDIO SURR-L SURR-R CENTER SUBWOOFER DVD MULTI IN Å ı Ç Î ‰ Ì Ó È Ô Ï 7 Connecting a D VD recorder or D VD player with its analog discrete output j[...]
-
Página 11
9 English 110V 127V 220V 230 - 240V TV VCR DBS IN IN IN (PLAY) DBS IN VCR MONITOR OUT IN (PLAY) Å ı Ç 110V 127V 220V 230 - 240V VCR DBS IN IN (PLAY) OUT (REC) DVR/DVD IN (PLAY) Y P B P R MONITOR OUT DVR/DVD IN VCR IN COMPONENT DBS IN VCR OUT (REC) IN (PLAY) DVR/DVD IN (PLAY) ‰ ÏÌ Î Ç Å ı 7 Connecting a VCR Å To left/right audio channel [...]
-
Página 12
10 English 110V 127V 220V 230 - 240V L R TV DBS IN IN MONITOR OUT OUT SUB- WOOFER DBS IN MONITOR OUT Y P B P R MONITOR OUT DVR/DVD IN VCR IN COMPONENT Å ı Ç Î ‰ 7 Connecting a TV Connect the TV to the appropr iate MONIT OR OUT jacks to vie w the pla yback picture from an y other connected video components. Stereo audio cable (not supplied) Re[...]
-
Página 13
11 English 110V 127V 220V 230 - 240V PCM/ STREAM DIGITAL OUT 110V 127V 220V 230 - 240V DIGITAL IN 3(VCR) 2(DBS) 1(DVR/DVD) NO TES • When shipped from the f actory , the DIGIT AL IN ter minals hav e been set f or use with the f ollowing components: – 1(D VR/D VD): F or D VD recorder or D VD play er – 2(DBS): For DBS tuner – 3(VCR): F or VCR [...]
-
Página 14
12 English Basic operations 2 Select the source to play On the front panel: T urn SOURCE SELECT OR until the source name y ou want appear s on the display . The source lamp corresponding to the selected source lights in red. • As you turn SOURCE SELECT OR, the source changes as f ollo ws: D VD MUL TI: Select for the D VD player using the analog d[...]
-
Página 15
13 English 3 Adjust the volume To increase the volume, turn MASTER V OLUME control c lockwise (or press V OLUME + on the remote control). To decrease the v olume, turn MASTER V OLUME control counter clockwise (or press V OLUME – on the remote control). • When you adjust the v olume, the volume le vel indication appears on the displa y for a whi[...]
-
Página 16
14 English Adjusting the subwoofer audio position If the subwoof er sound is much reinforced f or stereo sound compared to the sound reproduced with multi-channel, set the subwoof er audio position. The subwoofer output le vel is automatically decreased by the selected v alue when you are listening in stereo . The A UDIO P . indicator lights up whe[...]
-
Página 17
15 English Tu rning off the sounds temporarily From the remote control ONL Y : Press MUTING to turn off the sound through all connected speakers and headphones. “MUTING” appears on the display and the v olume tur ns off. To restore the sound, press MUTING again. • Pressing VOLUME +/– (or turning MASTER VOLUME control on the front panel) als[...]
-
Página 18
16 English From the remote control ONL Y : 1 T ake your position where y ou listen to the sound. • Make sure speak er cables are connected fir mly . 2 Press and hold SMART SURR OUND SETUP until “SETTING UP” flashes. *1 L: Left front speaker *2 C: Center speaker *3 R: Right front speaker *4 RS: Right surround speaker *5 SB: Surround back speak[...]
-
Página 19
17 English When your c lapping sound is detected successfully , • On the TV screen, “SUCCESSFUL, ” “RESUL T , ” and the setting v alues appear . The setting values are shown f or about 12 seconds. Ex.: • On the display , “SUCCESSFUL ” appears, then the setting values are sho wn as follows f or about 12 seconds: Ex.: *7 Standard chan[...]
-
Página 20
18 English Basic setting items Y ou can adjust the follo wing items. See pages in parentheses for details. •Y ou cannot select the items which is not av ailable with the current setting. •T he name of the item shown below is the on-screen displa y indication and the name in parentheses is the display indication. * If you ha ve used Smar t Surro[...]
-
Página 21
19 English FL SPK DISTANCE TOP MENU 5 SETTING MENU ADJUST MENU ∞ :ENTER :EXIT SETTING MENU (1) 5 SUBWOOFER : NO FRONT SPK : LARGE CENTER SPK : SMALL SURR. SPK : SMALL SURR. BACK SPK : SMALL ∞ :ENTER :TOP MENU SETTING MENU (2) 5 DISTANCE UNIT :meter FL SPK DISTANCE : 3.0m FR SPK DISTANCE : 3.0m C SPK DISTANCE : 3.0m LS SPK DISTANCE : 3.0m RS SPK[...]
-
Página 22
20 English DIGITAL IN 1 DIGITAL IN 1: 2 DVR/DVD 3 23 :OPERATE :BACK TOP MENU 5 SETTING MENU ADJUST MENU ∞ :ENTER :EXIT Menu operating procedure When operating, the on-screen displa y appears on the TV screen regardless of the SUPERIMPOSE setting (see page 25). Before y ou star t, remember ... There is a time limit in doing the f ollowing steps. I[...]
-
Página 23
21 English 4 Press SET . 5 To select the appropriate setting, press 2 or 3 repeatedly , then press SET . The on-screen display returns to the pre vious SETTING MENU . In this example, “SETTING MENU (4)” appears on the TV screen and “DIGIT AL IN1” appears on the display . • On the front panel, turn MUL TI JOG, then press SET . 6 Repeat ste[...]
-
Página 24
22 English 7 Setting the speaker distance The distance from your listening point to the speak ers is one of the impor tant elements to obtain the best possib le sound effect from the Surround/DSP modes. By ref erring to the speaker distance, the receiv er automatically sets the delay time of the sound through each speak er so that sounds through al[...]
-
Página 25
23 English Setting bass sound 7 Setting subwoofer output—SUBWOOFER OUT Y ou can select the type of the signal which can be transmitted through the subwoof er. In other words, you can determine whether or not the bass elements of the front speaker channels are transmitted through the subwoof er regardless of the front speaker siz e setting (either[...]
-
Página 26
24 English Setting the digital input (DIGIT AL IN) terminals—DIGIT AL IN 1/2/3 When you use the digital input terminals, register what components are connected to which terminals—DIGIT AL IN 1/2/3 (see page 11) so that the correct source name will appear when y ou select the digital source . Select one of the follo wing components for each term[...]
-
Página 27
25 English Selecting the component video input mode—DVD VIDEO INPUT/VCR VIDEO INPUT When you use the component video inputs f or connecting the D VD recorder (or D VD player) or VCR, register the type of video input jacks. If you ha ve not selected appropriate video input jacks, y ou cannot view the pla yback picture on the TV or the A V COMPU LI[...]
-
Página 28
26 English SUBWOOFER LEVEL (SUBWFR L VL) Adjust the subwoof er output level. (29) FRONT L LEVEL (FR ONT L L VL) Adjust the left front speaker output le vel. (29) FRONT R LEVEL (FR ONT R L VL) Adjust the right front speaker output le vel. (29) CENTER LEVEL (CENTER L VL) Adjust the center speaker output le vel. (29) SURR. L LEVEL (SURR L L VL) Adjust[...]
-
Página 29
27 English DIGITAL EQ 250Hz TOP MENU 5 SETTING MENU ADJUST MENU ∞ :ENTER :EXIT ADJUST MENU (1) 5 SUBWOOFER LEVEL : 0 FRONT L LEVEL : 0 FRONT R LEVEL : 0 CENTER LEVEL : 0 SURR. L LEVEL : 0 SURR. R LEVEL : 0 SURR. BACK LEVEL : 0 ∞ :ENTER :TOP MENU ADJUST MENU (2) 5 DIGITAL EQ 63Hz : 0 DIGITAL EQ 250Hz : 0 DIGITAL EQ 1kHz : 0 DIGITAL EQ 4kHz : 0 D[...]
-
Página 30
28 English Ex.: When adjusting subwoofer output le vel. 1 To show “T OP MENU, ” press MENU . Then press 5 or ∞ to select “ADJUST MENU . ” • On the front panel, turn MUL TI JOG. 2 To select “ADJUST MENU , ” press SET . 3 To select the desired submenu, press 5 or ∞ repeatedly . There are three screens from “ADJUST MENU (1)” to ?[...]
-
Página 31
29 English From the remote control: Y ou can also make adjustments the f ollowing wa y from the remote control. Set the mode selector to “AUDIO/TV/VCR/DBS. ” 1 Press TEST TONE to c heck the speakers’ output balance. • On the TV screen, “TEST T ONE” appears. The indicator corresponding to the speaker appears while a test tone comes out o[...]
-
Página 32
30 English Adjusting the equalization patterns —DIGIT AL EQ 63Hz/250Hz/1kHz/4kHz/16kHz Y ou can adjust equalization patterns in five frequency bands (center frequency: 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz) for the front speakers . • Once you ha ve made an adjustment, it is memorized f or each source. Adjustable range: –8 (dB) to +8 (dB) (in 2 [...]
-
Página 33
31 English 7 Making the center tone soft or sharp —CENTER TONE This setting is av ailable when one of the Surround/DSP modes is in use. T o activate Surround/DSP mode , see page 39. • This setting is common to all Surround modes, and is memorized separately f or DSP modes. •Y ou cannot adjust the center tone in the f ollowing cases: – When [...]
-
Página 34
32 English T uner operations When operating the receiver using the remote control, set the mode selector to “AUDIO/TV/ VCR/DBS. ” T uning in to stations manually From the remote control ONL Y : 1 Press FM/AM to select the band. The last received station of the selected band is tuned in. • Each time you press the b utton, the band alter nates [...]
-
Página 35
33 English 3 Press the numeric b uttons (1 – 10, +10) to select a channel number while the c hannel n umber position is flashing. •F or channel number 5, press 5. •F or channel number 15, press +10, then 5. •F or channel number 30, press +10, +10, then 10. 4 Press MEMOR Y again while the selected c hannel number is flashing on the displa y [...]
-
Página 36
34 English Creating realistic sound fields Reproducing theater ambience In a movie theater , many speakers are located on the w alls to reproduce impressive m ulti-channel sound, reaching you from all directions. With these many speak ers, sound localization and sound mov ement can be expressed. Surround/DSP modes built in this receiv er can create[...]
-
Página 37
35 English ■ Dolby Surround Dolby Pro Logic II Dolby Pr o Logic II is a m ulti-channel playbac k format to conv er t 2-channel software into 5-channel (plus subwoof er). The matr ix- based conv ersion method used for Dolby Pro Logic II mak es no limitation for the cutoff frequency of the surround treb le and enables stereo surround sound. • Thi[...]
-
Página 38
36 English DTS 96/24 In recent years , there has been increasing interest in higher sampling rates both f or recording and for reproducing at home. Higher sampling rates allow wider frequency r ange and greater bit depths provide e xtended dynamic range. DTS 96/24 is a multi-channel digital signal f or mat (fs 96 kHz/24 bits) introduced by Digital [...]
-
Página 39
37 English Introducing the DSP modes The sound heard in a concer t hall, club , etc. consists of direct sound and indirect sound—early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delay ed by the distances of the ceiling and walls. These direct so[...]
-
Página 40
38 English Virtual Surround Back This function creates the great surround eff ect from the behind as if you hav e connected the surround back speaker . The VIR TU AL SB (Surround Back) indicator lights up on the displa y . If you ha ve connected (and activated) the surround speak ers, you can use Vir tual Surround Back without connecting the surrou[...]
-
Página 41
39 English On the front panel: Before y ou star t, remember ... There is a time limit in doing the f ollowing steps . If the setting is canceled before y ou finish, star t from step 2 again. 1 Select and play an y source other than “D VD MUL TI. ” • Make sure y ou have selected the input mode (analog or digital) correctly . 2 Press SURROUND .[...]
-
Página 42
40 English 110V 127V 220V 230 - 240V AV COMPU LINK- III AV COMPU LINK EX AV COMPU LINK- III AV COMPU LINK AV COMPU LINK AV COMPU LINK remote contr ol system The A V COMPU LINK remote control system allows y ou to operate JVC’ s video components (TV , DVD pla yer*, and VCR) through this receiver . This receiver is equipped with the A V COMPU LINK-[...]
-
Página 43
41 English One-touch DVD play Simply by starting playbac k on the D VD play er , you can enjoy the D VD pla yback without setting other s witches manually . • When the D VD pla yer is connected through the analog input jacks on this receiv er (and analog input is selected), the receiver automatically turns on and changes the source to “D VR/D V[...]
-
Página 44
42 English Y ou can use the supplied remote control to operate not onl y this receiver but also other JVC pr oducts. • Ref er also to the manuals supplied with the other products. Some JVC VCRs can accept two types of the control signals— remote codes “A” and “B. ” – When operating a VCR whose remote control code is set to “A, ” s[...]
-
Página 45
43 English For various pla yback: (one touc h replay): Mov e the playback position bac k 10 seconds before the current position. RETURN: Return to the main menu during menu operation. CANCEL: Cancel the programmed trac k, etc. Only for D VD recorder operations: CHANNEL +/–: Change the channel numbers. D VD/HDD: Select the D VD recorder or HDD dec[...]
-
Página 46
44 English By changing the transmittable signals, you can use the supplied remote control to operate other man ufacturers’ products. • Ref er also to the manuals supplied with the other products. •T o operate those components with the remote control, first you need to set the manuf acturers’ codes each for the TV , VCR, and DBS. • After r[...]
-
Página 47
45 English ❏ Changing the transmittable signals for operating a VCR Set the mode selector to “AUDIO/TV/VCR/DBS. ” 1 Press and hold VCR . 2 Press VCR. 3 Enter the manufacturer’ s code using buttons 1 – 9, and 0. See “Manuf acturers’ codes f or VCR” on the right. 4 Release VCR . Now , you can perf or m the f ollowing operation on the [...]
-
Página 48
46 English ❏ Changing the transmittable signals for operating a DBS tuner Set the mode selector to “AUDIO/TV/VCR/DBS. ” 1 Press and hold DBS . 2 Press DBS. 3 Enter the manufacturer’ s code using buttons 1 – 9, and 0. See “Manuf acturers’ codes for DBS tuner” below . 4 Release DBS . Now , you can perf orm the following operation on t[...]
-
Página 49
47 English Tr oubleshooting PROBLEM The pow er does not come on. The receiver turns off (enters standby mode). “O VER HEA T” flashes on the display , then the receiver turns off . No sound from speakers . Sound from one speaker only . Bass sound is reinf orced too much when listening in stereo . Sounds are intermittently distor ted or the noise[...]
-
Página 50
48 English Designs and specifications are subject to change without notice. Amplifier Output Power At stereo operation: F ront channels: 100 W* per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distor tion. At surround operation: F ront channels: 100 W* per channel, min. RMS, driven into 6 Ω at 1 kHz with no m[...]
-
Página 51
VIDEO DBS IN VCR VIDEO OUT (REC) IN (PLAY) S-VIDEO DVR OUT (REC) DVR/DVD IN (PLAY) MONITOR OUT CAUTION:SPEAKER IMPEDANCE 6 – 16 ANTENNA AM LOOP AM EXT COAXIAL FM 75 CENTER SURROUND SURROUND BACK SPEAKERS LEFT RIGHT LEFT RIGHT FRONT Y P B P R COMPONENT MONITOR OUT DVR/DVD IN VCR IN PCM/ STREAM SURR-L SURR-R CENTER SUBWOOFER DIGITAL OUT DVD MULTI I[...]
-
Página 52
LVT1306-011B [UJ] RX-F31S INSTR UCTIONS HOME CINEMA CONTR OL CENTER cover_RX-F31S[UJ]ff.p65 05.6.9, 17:59 3[...]
-
Página 53
G-1 RX-F31S W arnings, Cautions, and Other s Caution–– STANDBY/ON button! Disconnect the mains plug to shut the pow er off completely . The ST ANDBY/ON button in any position does not disconnect the mains line. The po wer can be remote controlled. CA UTION To reduce the risk of electrical shocks, fire , etc.: 1. Do not remov e screws, cov ers o[...]
-
Página 54
1 Ta b le of Contents Pa r ts identification ................................................ 2 Getting started ...................................................... 4 Before Installation .................................................................. 4 Checking the supplied accessories ....................................... 4 Putting batterie[...]
-
Página 55
2 SET HOME CINEMA CONTROL CENTER REMOTE CONTR OL RM - SRXF31U 4 2 t 3 1 5 9 8 7 q w e r u y i o p 6 Remote control See pages in parentheses f or details. 1 TV DIRECT button (14) 2 Source selecting buttons (12, 14, 32, 33) D VR/D VD , VCR, DBS , TV , D VD MUL TI, FM/AM 3 Operating buttons f or tuner (32, 33) ( TUNING, FM MODE, TUNING 9 , MEMORY 4 On[...]
-
Página 56
3 Front panel 1 ST ANDBY/ON button and standby lamp (12, 14, 32) 2 Source lamps D VD MUL TI, D VR/D VD , VCR, DBS , TV , FM/AM 3 • SOURCE SELECT OR (12, 14, 33) • MUL TI JOG (18, 26, 33, 39) 4 MASTER VOLUME control (13) 5 PHONES jack (13) 6 TV DIRECT button (14) 7 SETTING button (18, 32) 8 ADJUST button (26, 32) 9 SURROUND b utton (39) p Remote[...]
-
Página 57
4 Putting batteries in the remote control Before using the remote control, put tw o supplied batter ies first. 1 Press and slide the battery cover on the bac k of the remote control. 2 Insert batteries. Make sure to match the polarity: (+) to (+) and (–) to (–). 3 Replace the cover . If the range or eff ectiveness of the remote control decrease[...]
-
Página 58
5 110V 127V 220V 230 - 240V ANTENNA AM LOOP AM EXT COAXIAL FM 75 ANTENNA Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. Connecting the FM and AM antennas Do not connect the A C power plug to the wall outlet until all connections are completed. AM loop antenna (supplied) If AM reception is poor, connect an outd[...]
-
Página 59
6 LR LS RS SB C SW 110V 127V 220V 230 - 240V CAUTION:SPEAKER IMPEDANCE 6 – 16 CENTER SURROUND SURROUND BACK SPEAKERS LEFT RIGHT LEFT RIGHT FRONT LINK- III OUT SUB- WOOFER AV COMPU Connecting the speakers T urn off all components before making connections. 1 T wist and remove the insulation at the end of eac h speaker cord. 2 Press and hold the cl[...]
-
Página 60
7 This receiver is equipped with the f ollowing video terminals— composite video , S-video, and component video terminals. • If your video components ha ve S-video (Y/C-separation) and/or component video (Y , P B , P R ) jacks , connect them using an S- video cable (not supplied) or component video cab le (not supplied). By using these terminal[...]
-
Página 61
8 110V 127V 220V 230 - 240V VIDEO VCR OUT (REC) Y P B P R MONITOR OUT DVR/DVD IN VCR IN COMPONENT DVR/DVD IN (PLAY) DVR OUT (REC) S-VIDEO VCR OUT (REC) DVR OUT (REC) DVR/DVD IN (PLAY) AUDIO SURR-L SURR-R CENTER SUBWOOFER DVD MULTI IN Å ı Ç Î ‰ Ì Ó È Ô Ï 7 Connecting a D VD recorder or D VD player with its analog discrete output jac ks (D[...]
-
Página 62
9 110V 127V 220V 230 - 240V TV VCR DBS IN IN IN (PLAY) DBS IN VCR MONITOR OUT IN (PLAY) Å ı Ç 110V 127V 220V 230 - 240V VCR DBS IN IN (PLAY) OUT (REC) DVR/DVD IN (PLAY) Y P B P R MONITOR OUT DVR/DVD IN VCR IN COMPONENT DBS IN VCR OUT (REC) IN (PLAY) DVR/DVD IN (PLAY) ‰ ÏÌ Î Ç Å ı 7 Connecting a VCR Å To left/right audio channel output ?[...]
-
Página 63
10 110V 127V 220V 230 - 240V L R TV DBS IN IN MONITOR OUT OUT SUB- WOOFER DBS IN MONITOR OUT Y P B P R MONITOR OUT DVR/DVD IN VCR IN COMPONENT Å ı Ç Î ‰ 7 Connecting a TV Connect the TV to the appropr iate MONIT OR OUT jacks to vie w the pla yback picture from an y other connected video components. Stereo audio cable (not supplied) Red Compon[...]
-
Página 64
11 110V 127V 220V 230 - 240V PCM/ STREAM DIGITAL OUT 110V 127V 220V 230 - 240V DIGITAL IN 3(VCR) 2(DBS) 1(DVR/DVD) NO TES • When shipped from the f actory , the DIGIT AL IN ter minals hav e been set f or use with the f ollowing components: – 1(D VR/D VD): F or D VD recorder or D VD play er – 2(DBS): For DBS tuner – 3(VCR): F or VCR If you c[...]
-
Página 65
12 Basic operations 2 Select the source to play On the front panel: T urn SOURCE SELECT OR until the source name y ou want appear s on the display . The source lamp corresponding to the selected source lights in red. • As you turn SOURCE SELECT OR, the source changes as f ollo ws: D VD MUL TI: Select for the D VD player using the analog discrete [...]
-
Página 66
13 3 Adjust the volume To increase the volume, turn MASTER V OLUME control c lockwise (or press V OLUME + on the remote control). To decrease the v olume, turn MASTER V OLUME control counter clockwise (or press V OLUME – on the remote control). • When you adjust the v olume, the volume le vel indication appears on the displa y for a while . CA [...]
-
Página 67
14 Adjusting the subwoofer audio position If the subwoof er sound is much reinforced f or stereo sound compared to the sound reproduced with multi-channel, set the subwoof er audio position. The subwoofer output le vel is automatically decreased by the selected v alue when you are listening in stereo . The A UDIO P . indicator lights up when this f[...]
-
Página 68
15 Tu rning off the sounds temporarily From the remote control ONL Y : Press MUTING to turn off the sound through all connected speakers and headphones. “MUTING” appears on the display and the v olume tur ns off. To restore the sound, press MUTING again. • Pressing VOLUME +/– (or turning MASTER VOLUME control on the front panel) also restor[...]
-
Página 69
16 From the remote control ONL Y : 1 T ake your position where y ou listen to the sound. • Make sure speak er cables are connected fir mly . 2 Press and hold SMART SURR OUND SETUP until “SETTING UP” flashes. *1 L: Left front speaker *2 C: Center speaker *3 R: Right front speaker *4 RS: Right surround speaker *5 SB: Surround back speak er *6 L[...]
-
Página 70
17 When your c lapping sound is detected successfully , • On the TV screen, “SUCCESSFUL, ” “RESUL T , ” and the setting v alues appear . The setting values are shown f or about 12 seconds. Ex.: • On the display , “SUCCESSFUL ” appears, then the setting values are sho wn as follows f or about 12 seconds: Ex.: *7 Standard channel (the[...]
-
Página 71
18 Basic setting items Y ou can adjust the follo wing items. See pages in parentheses for details. •Y ou cannot select the items which is not av ailable with the current setting. •T he name of the item shown below is the on-screen displa y indication and the name in parentheses is the display indication. * If you ha ve used Smar t Surround Setu[...]
-
Página 72
19 FL SPK DISTANCE TOP MENU 5 SETTING MENU ADJUST MENU ∞ :ENTER :EXIT SETTING MENU (1) 5 SUBWOOFER : NO FRONT SPK : LARGE CENTER SPK : SMALL SURR. SPK : SMALL SURR. BACK SPK : SMALL ∞ :ENTER :TOP MENU SETTING MENU (2) 5 DISTANCE UNIT :meter FL SPK DISTANCE : 3.0m FR SPK DISTANCE : 3.0m C SPK DISTANCE : 3.0m LS SPK DISTANCE : 3.0m RS SPK DISTANC[...]
-
Página 73
20 DIGITAL IN 1 DIGITAL IN 1: 2 DVR/DVD 3 23 :OPERATE :BACK TOP MENU 5 SETTING MENU ADJUST MENU ∞ :ENTER :EXIT Menu operating procedure When operating, the on-screen displa y appears on the TV screen regardless of the SUPERIMPOSE setting (see page 25). Before y ou star t, remember ... There is a time limit in doing the f ollowing steps. If the se[...]
-
Página 74
21 4 Press SET . 5 To select the appropriate setting, press 2 or 3 repeatedly , then press SET . The on-screen display returns to the pre vious SETTING MENU . In this example, “SETTING MENU (4)” appears on the TV screen and “DIGIT AL IN1” appears on the display . • On the front panel, turn MUL TI JOG, then press SET . 6 Repeat steps 2 to [...]
-
Página 75
22 7 Setting the speaker distance The distance from your listening point to the speak ers is one of the impor tant elements to obtain the best possib le sound effect from the Surround/DSP modes. By ref erring to the speaker distance, the receiv er automatically sets the delay time of the sound through each speak er so that sounds through all the sp[...]
-
Página 76
23 Setting bass sound 7 Setting subwoofer output—SUBWOOFER OUT Y ou can select the type of the signal which can be transmitted through the subwoof er. In other words, you can determine whether or not the bass elements of the front speaker channels are transmitted through the subwoof er regardless of the front speaker siz e setting (either “SMAL[...]
-
Página 77
24 Setting the digital input (DIGIT AL IN) terminals—DIGIT AL IN 1/2/3 When you use the digital input terminals, register what components are connected to which terminals—DIGIT AL IN 1/2/3 (see page 11) so that the correct source name will appear when y ou select the digital source . Select one of the follo wing components for each terminal: D [...]
-
Página 78
25 Selecting the component video input mode—DVD VIDEO INPUT/VCR VIDEO INPUT When you use the component video inputs f or connecting the D VD recorder (or D VD player) or VCR, register the type of video input jacks . If you ha ve not selected appropriate video input jacks, y ou cannot view the pla yback picture on the TV or the A V COMPU LINK remo[...]
-
Página 79
26 SUBWOOFER LEVEL (SUBWFR L VL) Adjust the subwoof er output level. (29) FRONT L LEVEL (FR ONT L L VL) Adjust the left front speaker output le vel. (29) FRONT R LEVEL (FR ONT R L VL) Adjust the right front speaker output le vel. (29) CENTER LEVEL (CENTER L VL) Adjust the center speaker output le vel. (29) SURR. L LEVEL (SURR L L VL) Adjust the lef[...]
-
Página 80
27 DIGITAL EQ 250Hz TOP MENU 5 SETTING MENU ADJUST MENU ∞ :ENTER :EXIT ADJUST MENU (1) 5 SUBWOOFER LEVEL : 0 FRONT L LEVEL : 0 FRONT R LEVEL : 0 CENTER LEVEL : 0 SURR. L LEVEL : 0 SURR. R LEVEL : 0 SURR. BACK LEVEL : 0 ∞ :ENTER :TOP MENU ADJUST MENU (2) 5 DIGITAL EQ 63Hz : 0 DIGITAL EQ 250Hz : 0 DIGITAL EQ 1kHz : 0 DIGITAL EQ 4kHz : 0 DIGITAL E[...]
-
Página 81
28 Ex.: When adjusting subwoofer output le vel. 1 To show “T OP MENU, ” press MENU . Then press 5 or ∞ to select “ADJUST MENU . ” • On the front panel, turn MUL TI JOG. 2 To select “ADJUST MENU , ” press SET . 3 To select the desired submenu, press 5 or ∞ repeatedly . There are three screens from “ADJUST MENU (1)” to “ADJUST[...]
-
Página 82
29 From the remote control: Y ou can also make adjustments the f ollowing wa y from the remote control. Set the mode selector to “AUDIO/TV/VCR/DBS. ” 1 Press TEST TONE to c heck the speakers’ output balance. • On the TV screen, “TEST T ONE” appears. The indicator corresponding to the speaker appears while a test tone comes out of the sp[...]
-
Página 83
30 Adjusting the equalization patterns —DIGIT AL EQ 63Hz/250Hz/1kHz/4kHz/16kHz Y ou can adjust equalization patterns in five frequency bands (center frequency: 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz) for the front speakers . • Once you ha ve made an adjustment, it is memorized f or each source. Adjustable range: –8 (dB) to +8 (dB) (in 2 dB inter[...]
-
Página 84
31 7 Making the center tone soft or sharp —CENTER TONE This setting is av ailable when one of the Surround/DSP modes is in use. T o activate Surround/DSP mode , see page 39. • This setting is common to all Surround modes, and is memorized separately f or DSP modes. •Y ou cannot adjust the center tone in the f ollowing cases: – When “CENTE[...]
-
Página 85
32 Setting the AM tuner interval spacing Some countries space AM stations 9 kHz apar t, and other countries use 10 kHz spacing. 9 kHz inter val spacing is the initial setting. • Be sure the receiver is turned off, b ut is plugged into an AC outlet when setting the AM tuner interval. On the front panel ONL Y: To select the 10 kHz interval: Hold do[...]
-
Página 86
33 3 Press the numeric b uttons (1 – 10, +10) to select a channel number while the c hannel n umber position is flashing. •F or channel number 5, press 5. •F or channel number 15, press +10, then 5. •F or channel number 30, press +10, +10, then 10. 4 Press MEMOR Y again while the selected c hannel number is flashing on the displa y . The se[...]
-
Página 87
34 Creating realistic sound fields Reproducing theater ambience In a movie theater , many speakers are located on the w alls to reproduce impressive m ulti-channel sound, reaching you from all directions. With these many speak ers, sound localization and sound mov ement can be expressed. Surround/DSP modes built in this receiv er can create almost [...]
-
Página 88
35 ■ Dolby Surround Dolby Pro Logic II Dolby Pr o Logic II is a m ulti-channel playbac k format to conv er t 2-channel software into 5-channel (plus subwoof er). The matr ix- based conv ersion method used for Dolby Pro Logic II mak es no limitation for the cutoff frequency of the surround treb le and enables stereo surround sound. • This receiv[...]
-
Página 89
36 DTS 96/24 In recent years , there has been increasing interest in higher sampling rates both f or recording and for reproducing at home. Higher sampling rates allow wider frequency r ange and greater bit depths provide e xtended dynamic range. DTS 96/24 is a multi-channel digital signal f or mat (fs 96 kHz/24 bits) introduced by Digital Theater [...]
-
Página 90
37 Introducing the DSP modes The sound heard in a concer t hall, club , etc. consists of direct sound and indirect sound—early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delay ed by the distances of the ceiling and walls. These direct sounds and[...]
-
Página 91
38 Virtual Surround Back This function creates the great surround eff ect from the behind as if you hav e connected the surround back speaker . The VIR TU AL SB (Surround Back) indicator lights up on the displa y . If you ha ve connected (and activated) the surround speak ers, you can use Vir tual Surround Back without connecting the surround back [...]
-
Página 92
39 On the front panel: Before y ou star t, remember ... There is a time limit in doing the f ollowing steps . If the setting is canceled before y ou finish, star t from step 2 again. 1 Select and play an y source other than “D VD MUL TI. ” • Make sure y ou have selected the input mode (analog or digital) correctly . 2 Press SURROUND . MUL TI [...]
-
Página 93
40 110V 127V 220V 230 - 240V AV COMPU LINK- III AV COMPU LINK EX AV COMPU LINK- III AV COMPU LINK AV COMPU LINK AV COMPU LINK remote contr ol system The A V COMPU LINK remote control system allows y ou to operate JVC’ s video components (TV , DVD pla yer*, and VCR) through this receiver . This receiver is equipped with the A V COMPU LINK- III , w[...]
-
Página 94
41 One-touch DVD play Simply by starting playbac k on the D VD play er , you can enjoy the D VD pla yback without setting other s witches manually . • When the D VD pla yer is connected through the analog input jacks on this receiv er (and analog input is selected), the receiver automatically turns on and changes the source to “D VR/D VD” or [...]
-
Página 95
42 Y ou can use the supplied remote control to operate not onl y this receiver but also other JVC pr oducts. • Ref er also to the manuals supplied with the other products. Some JVC VCRs can accept two types of the control signals— remote codes “A” and “B. ” – When operating a VCR whose remote control code is set to “A, ” set the m[...]
-
Página 96
43 For various pla yback: (one touc h replay): Mov e the playback position bac k 10 seconds before the current position. RETURN: Return to the main menu during menu operation. CANCEL: Cancel the programmed trac k, etc. Only for D VD recorder operations: CHANNEL +/–: Change the channel numbers. D VD/HDD: Select the D VD recorder or HDD deck. (Only[...]
-
Página 97
44 By changing the transmittable signals, you can use the supplied remote control to operate other man ufacturers’ products. • Ref er also to the manuals supplied with the other products. •T o operate those components with the remote control, first you need to set the manuf acturers’ codes each for the TV , VCR, and DBS. • After replacing[...]
-
Página 98
45 ❏ Changing the transmittable signals for operating a VCR Set the mode selector to “AUDIO/TV/VCR/DBS. ” 1 Press and hold VCR . 2 Press VCR. 3 Enter the manufacturer’ s code using buttons 1 – 9, and 0. See “Manuf acturers’ codes f or VCR” on the right. 4 Release VCR . Now , you can perf or m the f ollowing operation on the VCR. VCR[...]
-
Página 99
46 ❏ Changing the transmittable signals for operating a DBS tuner Set the mode selector to “AUDIO/TV/VCR/DBS. ” 1 Press and hold DBS . 2 Press DBS. 3 Enter the manufacturer’ s code using buttons 1 – 9, and 0. See “Manuf acturers’ codes for DBS tuner” below . 4 Release DBS . Now , you can perf orm the following operation on the DBS t[...]
-
Página 100
47 Tr oubleshooting PROBLEM The pow er does not come on. The receiver turns off (enters standby mode). “O VER HEA T” flashes on the display , then the receiver turns off . No sound from speakers . Sound from one speaker only . Bass sound is reinf orced too much when listening in stereo . Sounds are intermittently distor ted or the noise is hear[...]
-
Página 101
48 Designs and specifications are subject to change without notice. Amplifier Output Power At stereo operation: F ront channels: 100 W* per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distor tion. At surround operation: F ront channels: 100 W* per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than[...]
-
Página 102
VIDEO DBS IN VCR VIDEO OUT (REC) IN (PLAY) S-VIDEO DVR OUT (REC) DVR/DVD IN (PLAY) MONITOR OUT CAUTION:SPEAKER IMPEDANCE 6 – 16 ANTENNA AM LOOP AM EXT COAXIAL FM 75 CENTER SURROUND SURROUND BACK SPEAKERS LEFT RIGHT LEFT RIGHT FRONT Y P B P R COMPONENT MONITOR OUT DVR/DVD IN VCR IN PCM/ STREAM SURR-L SURR-R CENTER SUBWOOFER DIGITAL OUT DVD MULTI I[...]
-
Página 103
LVT1306-012A [A] RX-F31S INSTR UCTIONS HOME CINEMA CONTROL CENTER cover_RX-F31S[A]2.p65 05.6.13, 10:33 3[...]
-
Página 104
G-1 RX-F31S W arnings, Cautions, and Other s Caution–– STANDBY/ON button! Disconnect the mains plug to shut the pow er off completely . The ST ANDBY/ON button in any position does not disconnect the mains line. The po wer can be remote controlled. CA UTION To reduce the risk of electrical shocks, fire , etc.: 1. Do not remov e screws, cov ers o[...]
-
Página 105
1 Ta b le of Contents Pa r ts identification ................................................ 2 Getting started ...................................................... 4 Before Installation .................................................................. 4 Checking the supplied accessories ....................................... 4 Putting batterie[...]
-
Página 106
2 SET HOME CINEMA CONTROL CENTER REMOTE CONTR OL RM - SRXF31U 4 2 t 3 1 5 9 8 7 q w e r u y i o p 6 Remote control See pages in parentheses f or details. 1 TV DIRECT button (14) 2 Source selecting buttons (12, 14, 32, 33) D VR/D VD , VCR, DBS , TV , D VD MUL TI, FM/AM 3 Operating buttons f or tuner (32, 33) ( TUNING, FM MODE, TUNING 9 , MEMORY 4 On[...]
-
Página 107
3 Front panel 1 ST ANDBY/ON button and standby lamp (12, 14, 32) 2 Source lamps D VD MUL TI, D VR/D VD , VCR, DBS , TV , FM/AM 3 • SOURCE SELECT OR (12, 14, 33) • MUL TI JOG (18, 26, 33, 39) 4 MASTER VOLUME control (13) 5 PHONES jack (13) 6 TV DIRECT button (14) 7 SETTING button (18, 32) 8 ADJUST button (26, 32) 9 SURROUND b utton (39) p Remote[...]
-
Página 108
4 Putting batteries in the remote control Before using the remote control, put tw o supplied batter ies first. 1 Press and slide the battery cover on the bac k of the remote control. 2 Insert batteries. Make sure to match the polarity: (+) to (+) and (–) to (–). 3 Replace the cover . If the range or eff ectiveness of the remote control decrease[...]
-
Página 109
5 110V 127V 220V 230 - 240V ANTENNA AM LOOP AM EXT COAXIAL FM 75 ANTENNA Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. Connecting the FM and AM antennas Do not connect the A C power plug to the wall outlet until all connections are completed. AM loop antenna (supplied) If AM reception is poor, connect an outd[...]
-
Página 110
6 LR LS RS SB C SW 110V 127V 220V 230 - 240V CAUTION:SPEAKER IMPEDANCE 6 – 16 CENTER SURROUND SURROUND BACK SPEAKERS LEFT RIGHT LEFT RIGHT FRONT LINK- III OUT SUB- WOOFER AV COMPU Connecting the speakers T urn off all components before making connections. 1 T wist and remove the insulation at the end of eac h speaker cord. 2 Press and hold the cl[...]
-
Página 111
7 This receiver is equipped with the f ollowing video terminals— composite video , S-video, and component video terminals. • If your video components ha ve S-video (Y/C-separation) and/or component video (Y , P B , P R ) jacks , connect them using an S- video cable (not supplied) or component video cab le (not supplied). By using these terminal[...]
-
Página 112
8 110V 127V 220V 230 - 240V VIDEO VCR OUT (REC) Y P B P R MONITOR OUT DVR/DVD IN VCR IN COMPONENT DVR/DVD IN (PLAY) DVR OUT (REC) S-VIDEO VCR OUT (REC) DVR OUT (REC) DVR/DVD IN (PLAY) AUDIO SURR-L SURR-R CENTER SUBWOOFER DVD MULTI IN Å ı Ç Î ‰ Ì Ó È Ô Ï 7 Connecting a D VD recorder or D VD player with its analog discrete output jac ks (D[...]
-
Página 113
9 110V 127V 220V 230 - 240V TV VCR DBS IN IN IN (PLAY) DBS IN VCR MONITOR OUT IN (PLAY) Å ı Ç 110V 127V 220V 230 - 240V VCR DBS IN IN (PLAY) OUT (REC) DVR/DVD IN (PLAY) Y P B P R MONITOR OUT DVR/DVD IN VCR IN COMPONENT DBS IN VCR OUT (REC) IN (PLAY) DVR/DVD IN (PLAY) ‰ ÏÌ Î Ç Å ı 7 Connecting a VCR Å To left/right audio channel output ?[...]
-
Página 114
10 110V 127V 220V 230 - 240V L R TV DBS IN IN MONITOR OUT OUT SUB- WOOFER DBS IN MONITOR OUT Y P B P R MONITOR OUT DVR/DVD IN VCR IN COMPONENT Å ı Ç Î ‰ 7 Connecting a TV Connect the TV to the appropr iate MONIT OR OUT jacks to vie w the pla yback picture from an y other connected video components. Stereo audio cable (not supplied) Red Compon[...]
-
Página 115
11 110V 127V 220V 230 - 240V PCM/ STREAM DIGITAL OUT 110V 127V 220V 230 - 240V DIGITAL IN 3(VCR) 2(DBS) 1(DVR/DVD) NO TES • When shipped from the f actory , the DIGIT AL IN ter minals hav e been set f or use with the f ollowing components: – 1(D VR/D VD): F or D VD recorder or D VD play er – 2(DBS): For DBS tuner – 3(VCR): F or VCR If you c[...]
-
Página 116
12 Basic operations 2 Select the source to play On the front panel: T urn SOURCE SELECT OR until the source name y ou want appear s on the display . The source lamp corresponding to the selected source lights in red. • As you turn SOURCE SELECT OR, the source changes as f ollo ws: D VD MUL TI: Select for the D VD player using the analog discrete [...]
-
Página 117
13 3 Adjust the volume To increase the volume, turn MASTER V OLUME control c lockwise (or press V OLUME + on the remote control). To decrease the v olume, turn MASTER V OLUME control counter clockwise (or press V OLUME – on the remote control). • When you adjust the v olume, the volume le vel indication appears on the displa y for a while . CA [...]
-
Página 118
14 Adjusting the subwoofer audio position If the subwoof er sound is much reinforced f or stereo sound compared to the sound reproduced with multi-channel, set the subwoof er audio position. The subwoofer output le vel is automatically decreased by the selected v alue when you are listening in stereo . The A UDIO P . indicator lights up when this f[...]
-
Página 119
15 Tu rning off the sounds temporarily From the remote control ONL Y : Press MUTING to turn off the sound through all connected speakers and headphones. “MUTING” appears on the display and the v olume tur ns off. To restore the sound, press MUTING again. • Pressing VOLUME +/– (or turning MASTER VOLUME control on the front panel) also restor[...]
-
Página 120
16 From the remote control ONL Y : 1 T ake your position where y ou listen to the sound. • Make sure speak er cables are connected fir mly . 2 Press and hold SMART SURR OUND SETUP until “SETTING UP” flashes. *1 L: Left front speaker *2 C: Center speaker *3 R: Right front speaker *4 RS: Right surround speaker *5 SB: Surround back speak er *6 L[...]
-
Página 121
17 When your c lapping sound is detected successfully • On the TV screen, “SUCCESSFUL, ” “RESUL T , ” and the setting v alues appear . The setting values are shown f or about 12 seconds. Ex.: • On the display , “SUCCESSFUL ” appears, then the setting values are sho wn as follows f or about 12 seconds: Ex.: *7 Standard channel (the c[...]
-
Página 122
18 Basic setting items Y ou can adjust the follo wing items. See pages in parentheses for details. •Y ou cannot select the items which is not av ailable with the current setting. •T he name of the item shown below is the on-screen displa y indication and the name in parentheses is the display indication. * If you ha ve used Smar t Surround Setu[...]
-
Página 123
19 FL SPK DISTANCE TOP MENU 5 SETTING MENU ADJUST MENU ∞ :ENTER :EXIT SETTING MENU (1) 5 SUBWOOFER : NO FRONT SPK : LARGE CENTER SPK : SMALL SURR. SPK : SMALL SURR. BACK SPK : SMALL ∞ :ENTER :TOP MENU SETTING MENU (2) 5 DISTANCE UNIT :meter FL SPK DISTANCE : 3.0m FR SPK DISTANCE : 3.0m C SPK DISTANCE : 3.0m LS SPK DISTANCE : 3.0m RS SPK DISTANC[...]
-
Página 124
20 DIGITAL IN 1 DIGITAL IN 1: 2 DVR/DVD 3 23 :OPERATE :BACK TOP MENU 5 SETTING MENU ADJUST MENU ∞ :ENTER :EXIT Menu operating procedure When operating, the on-screen displa y appears on the TV screen regardless of the SUPERIMPOSE setting (see page 25). Before y ou star t, remember ... There is a time limit in doing the f ollowing steps. If the se[...]
-
Página 125
21 4 Press SET . 5 To select the appropriate setting, press 2 or 3 repeatedly , then press SET . The on-screen display returns to the pre vious SETTING MENU . In this example, “SETTING MENU (4)” appears on the TV screen and “DIGIT AL IN1” appears on the display . • On the front panel, turn MUL TI JOG, then press SET . 6 Repeat steps 2 to [...]
-
Página 126
22 7 Setting the speaker distance The distance from your listening point to the speak ers is one of the impor tant elements to obtain the best possib le sound effect from the Surround/DSP modes. By ref erring to the speaker distance, the receiv er automatically sets the delay time of the sound through each speak er so that sounds through all the sp[...]
-
Página 127
23 Setting bass sound 7 Setting subwoofer output—SUBWOOFER OUT Y ou can select the type of the signal which can be transmitted through the subwoof er. In other words, you can determine whether or not the bass elements of the front speaker channels are transmitted through the subwoof er regardless of the front speaker siz e setting (either “SMAL[...]
-
Página 128
24 Setting the digital input (DIGIT AL IN) terminals—DIGIT AL IN 1/2/3 When you use the digital input terminals, register what components are connected to which terminals—DIGIT AL IN 1/2/3 (see page 11) so that the correct source name will appear when y ou select the digital source . Select one of the follo wing components for each terminal: D [...]
-
Página 129
25 Selecting the component video input mode—DVD VIDEO INPUT/VCR VIDEO INPUT When you use the component video inputs f or connecting the D VD recorder (or D VD player) or VCR, register the type of video input jacks . If you ha ve not selected appropriate video input jacks, y ou cannot view the pla yback picture on the TV or the A V COMPU LINK remo[...]
-
Página 130
26 SUBWOOFER LEVEL (SUBWFR L VL) Adjust the subwoof er output level. (29) FRONT L LEVEL (FR ONT L L VL) Adjust the left front speaker output le vel. (29) FRONT R LEVEL (FR ONT R L VL) Adjust the right front speaker output le vel. (29) CENTER LEVEL (CENTER L VL) Adjust the center speaker output le vel. (29) SURR. L LEVEL (SURR L L VL) Adjust the lef[...]
-
Página 131
27 DIGITAL EQ 250Hz TOP MENU 5 SETTING MENU ADJUST MENU ∞ :ENTER :EXIT ADJUST MENU (1) 5 SUBWOOFER LEVEL : 0 FRONT L LEVEL : 0 FRONT R LEVEL : 0 CENTER LEVEL : 0 SURR. L LEVEL : 0 SURR. R LEVEL : 0 SURR. BACK LEVEL : 0 ∞ :ENTER :TOP MENU ADJUST MENU (2) 5 DIGITAL EQ 63Hz : 0 DIGITAL EQ 250Hz : 0 DIGITAL EQ 1kHz : 0 DIGITAL EQ 4kHz : 0 DIGITAL E[...]
-
Página 132
28 Ex.: When adjusting subwoofer output le vel. 1 To show “T OP MENU, ” press MENU . Then press 5 or ∞ to select “ADJUST MENU . ” • On the front panel, turn MUL TI JOG. 2 To select “ADJUST MENU , ” press SET . 3 To select the desired submenu, press 5 or ∞ repeatedly . There are three screens from “ADJUST MENU (1)” to “ADJUST[...]
-
Página 133
29 From the remote control: Y ou can also make adjustments the f ollowing wa y from the remote control. Set the mode selector to “AUDIO/TV/VCR/DBS. ” 1 Press TEST TONE to c heck the speakers’ output balance. • On the TV screen, “TEST T ONE” appears. The indicator corresponding to the speaker appears while a test tone comes out of the sp[...]
-
Página 134
30 Adjusting the equalization patterns —DIGIT AL EQ 63Hz/250Hz/1kHz/4kHz/16kHz Y ou can adjust equalization patterns in five frequency bands (center frequency: 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz) for the front speakers . • Once you ha ve made an adjustment, it is memorized f or each source. Adjustable range: –8 (dB) to +8 (dB) (in 2 dB inter[...]
-
Página 135
31 7 Making the center tone soft or sharp —CENTER TONE This setting is av ailable when one of the Surround/DSP modes is in use. T o activate Surround/DSP mode , see page 39. • This setting is common to all Surround modes, and is memorized separately f or DSP modes. •Y ou cannot adjust the center tone in the f ollowing cases: – When “CENTE[...]
-
Página 136
32 T uner operations When operating the receiver using the remote control, set the mode selector to “AUDIO/TV/ VCR/DBS. ” T uning in to stations manually From the remote control ONL Y : 1 Press FM/AM to select the band. The last received station of the selected band is tuned in. • Each time you press the b utton, the band alter nates between [...]
-
Página 137
33 3 Press the numeric b uttons (1 – 10, +10) to select a channel number while the c hannel n umber position is flashing. •F or channel number 5, press 5. •F or channel number 15, press +10, then 5. •F or channel number 30, press +10, +10, then 10. 4 Press MEMOR Y again while the selected c hannel number is flashing on the displa y . The se[...]
-
Página 138
34 Creating realistic sound fields Reproducing theater ambience In a movie theater , many speakers are located on the w alls to reproduce impressive m ulti-channel sound, reaching you from all directions. With these many speak ers, sound localization and sound mov ement can be expressed. Surround/DSP modes built in this receiv er can create almost [...]
-
Página 139
35 ■ Dolby Surround Dolby Pro Logic II Dolby Pr o Logic II is a m ulti-channel playbac k format to convert 2-channel software into 5-channel (plus subwoof er). The matr ix- based conv ersion method used for Dolby Pro Logic II mak es no limitation for the cutoff frequency of the surround treb le and enables stereo surround sound. • This receiv e[...]
-
Página 140
36 DTS 96/24 In recent years , there has been increasing interest in higher sampling rates both f or recording and for reproducing at home. Higher sampling rates allow wider frequency r ange and greater bit depths provide e xtended dynamic range. DTS 96/24 is a multi-channel digital signal f or mat (fs 96 kHz/24 bits) introduced by Digital Theater [...]
-
Página 141
37 Introducing the DSP modes The sound heard in a concer t hall, club , etc. consists of direct sound and indirect sound—early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delay ed by the distances of the ceiling and walls. These direct sounds and[...]
-
Página 142
38 Virtual Surround Back This function creates the great surround eff ect from the behind as if you hav e connected the surround back speaker . The VIR TU AL SB (Surround Back) indicator lights up on the displa y . If you ha ve connected (and activated) the surround speak ers, you can use Vir tual Surround Back without connecting the surround back [...]
-
Página 143
39 On the front panel: Before y ou star t, remember ... There is a time limit in doing the f ollowing steps . If the setting is canceled before y ou finish, star t from step 2 again. 1 Select and play an y source other than “D VD MUL TI. ” • Make sure y ou have selected the input mode (analog or digital) correctly . 2 Press SURROUND . MUL TI [...]
-
Página 144
40 110V 127V 220V 230 - 240V AV COMPU LINK- III AV COMPU LINK EX AV COMPU LINK- III AV COMPU LINK AV COMPU LINK AV COMPU LINK remote contr ol system The A V COMPU LINK remote control system allows y ou to operate JVC’ s video components (TV , DVD pla yer*, and VCR) through this receiver . This receiver is equipped with the A V COMPU LINK- III , w[...]
-
Página 145
41 One-touch DVD play Simply by starting playbac k on the D VD play er , you can enjoy the D VD pla yback without setting other s witches manually . • When the D VD pla yer is connected through the analog input jacks on this receiv er (and analog input is selected), the receiver automatically turns on and changes the source to “D VR/D VD” or [...]
-
Página 146
42 Y ou can use the supplied remote control to operate not onl y this receiver but also other JVC pr oducts. • Ref er also to the manuals supplied with the other products. Some JVC VCRs can accept two types of the control signals— remote codes “A” and “B. ” – When operating a VCR whose remote control code is set to “A, ” set the m[...]
-
Página 147
43 For various pla yback: (one touc h replay): Mov e the playback position bac k 10 seconds before the current position. RETURN: Return to the main menu during menu operation. CANCEL: Cancel the programmed trac k, etc. Only for D VD recorder operations: CHANNEL +/–: Change the channel numbers. D VD/HDD: Select the D VD recorder or HDD deck. (Only[...]
-
Página 148
44 By changing the transmittable signals, you can use the supplied remote control to operate other man ufacturers’ products. • Ref er also to the manuals supplied with the other products. •T o operate those components with the remote control, first you need to set the manuf acturers’ codes each for the TV , VCR, and DBS. • After replacing[...]
-
Página 149
45 ❏ Changing the transmittable signals for operating a VCR Set the mode selector to “AUDIO/TV/VCR/DBS. ” 1 Press and hold VCR . 2 Press VCR. 3 Enter the manufacturer’ s code using buttons 1 – 9, and 0. See “Manuf acturers’ codes f or VCR” on the right. 4 Release VCR . Now , you can perf or m the f ollowing operation on the VCR. VCR[...]
-
Página 150
46 ❏ Changing the transmittable signals for operating a DBS tuner Set the mode selector to “AUDIO/TV/VCR/DBS. ” 1 Press and hold DBS . 2 Press DBS. 3 Enter the manufacturer’ s code using buttons 1 – 9, and 0. See “Manuf acturers’ codes for DBS tuner” below . 4 Release DBS . Now , you can perf orm the following operation on the DBS t[...]
-
Página 151
47 Tr oubleshooting PROBLEM The pow er does not come on. The receiver turns off (enters standby mode). “O VER HEA T” flashes on the display , then the receiver turns off . No sound from speakers . Sound from one speaker only . Bass sound is reinf orced too much when listening in stereo . Sounds are intermittently distor ted or the noise is hear[...]
-
Página 152
48 Designs and specifications are subject to change without notice. Amplifier Output Power At stereo operation: F ront channels: 100 W* per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distor tion. At surround operation: F ront channels: 100 W* per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than[...]
-
Página 153
VIDEO DBS IN VCR VIDEO OUT (REC) IN (PLAY) S-VIDEO DVR OUT (REC) DVR/DVD IN (PLAY) MONITOR OUT CAUTION:SPEAKER IMPEDANCE 6 – 16 ANTENNA AM LOOP AM EXT COAXIAL FM 75 CENTER SURROUND SURROUND BACK SPEAKERS LEFT RIGHT LEFT RIGHT FRONT Y P B P R COMPONENT MONITOR OUT DVR/DVD IN VCR IN PCM/ STREAM SURR-L SURR-R CENTER SUBWOOFER DIGITAL OUT DVD MULTI I[...]