Minolta CF2002 manual

CF2002/CF3102 User Man ual [ Basic Operations ] 2 Before Making Copies Basic Copy Operations Loading Paper Original Documents Specifying Copy Settings Controlling Jobs[...]

Con tent s CF2002/CF3 102 i Cont ents The topics list ed below are desc ribed in t he Basic Op erations v olume. For deta ils on oth er topics, ref er to the Adm inistrator Ope rations an d the Advanc ed Operat ions vol umes of t he User Ma nual and t he Enla rge Display Mode Op erat ion Gui de. 1 Before Making Copies 1.1 Introduction .. ..........[...]

Con tent s ii CF 2002/CF3102 2 Basic Copy Operations 2.1 Making Ba sic Copies ........... ................. ................. ................. ...... 2-2 2.2 Practical Cop y Examples .... ................. ................. ................. ...... 2 -5 To make a copy that is the s ame size as the origi nal ............... ...... 2-5 To make an en[...]

Con tent s CF2002/CF 3102 iii To set t he “ Specia lty Paper ” fu nction ........................... .................3-20 Loading Paper Into the Manual By pass Tra y ..................... ........... 3-21 4 Original Documents 4.1 Document F eeding ................... ................. ................. ................. .. 4-2 Documen t Types [...]

Con tent s iv CF 2002/CF3102 5.4 Selecting th e Paper Setting ................. ................. ................. .... 5-12 Selectin g the Paper Setting Auto matically ( “ Auto Pape r ” Setting).................. ................. ................. ............... 5-12 Selectin g the Paper Manually ............ ................ ..............[...]

Con tent s CF2002/CF3 102 v 6 Controlling Jobs 6.1 Descrip tion of Jobs....... ................. ................. ................. ............. 6-2 Job ............ ................ ................. ................. ................. ................. .. 6-2 Multi-j ob feature ........ ................. ................. ................. ....[...]

Con tent s vi CF 2002/CF3102 Administrator Operations For det ails on the f ollowing to pics, ref er to the Admin istrator Opera tions volume of this U ser Manu al. 1I n t r o d u c t i o n 2 Safety In formation 3 Precautions 4 Part Names an d Their Functio ns 5 Utility Mode Operations 6 Touch Panel Messages 7 Troubleshooti ng 8 Appendix Advanced O[...]

Before Making C opies Chapter 1 1 1 Before Making Copies[...]

1 1.1 Introd uction 1-2 CF 2002/CF3 102 Before Making C opies Chapter 1 1.1 Introduction Structure of the Manual The various ex planation s for thi s copier are divide d into fo ur parts: t he Admini strator Operati ons, Basic Operations and Advanc ed Operati ons volumes of the User Ma n- ual, an d the Enlarg e Displ ay Mode Op eration G uide. The [...]

1.1 Introducti on 1 CF2002/CF3 102 1- 3 Before Making C opies Chapter 1[...]

1 1.2 Avail able Featu res 1-4 CF 2002/CF3 102 Before Making C opies Chapter 1 1.2 Availabl e Feat ures The mai n functio ns avail able with th is mach ine are de scribed b elow. Opera ting pro- cedures are provi ded in c hapter 2 “ Basic Copy Operati ons ” and chapter 5 “ Spec i- fying C opy Setting s ” . Color Settings “ Auto Color ” [...]

1.2 Available Features 1 CF2002/CF3 102 1- 5 Before Making C opies Chapter 1 Finishing Setting s Stapling Copies are stapled t ogether be fore they a re fed out. Stapling i s only a vailable if the option al finish er (FN-8 or FN-116) is installe d. Hole-p unching Holes a re punche d in copies before the y are fed o ut. Hole-pun ching is only avai [...]

1 1.2 Avail able Featu res 1-6 CF 2002/CF3 102 Before Making C opies Chapter 1 “ Custo mZoom ” setti ng G Any zo om ra tio ( betw een × 0.250 and × 4.0 00) can b e specifi ed. ❍ Use t he keypad to enter the des ired zoom ra tio. ❍ In addi tion, up to two zoom r atios spe cified u sing the key pad can be stored for later use. “ X/Y Zoom [...]

1.2 Available Features 1 CF2002/CF3 102 1- 7 Before Making C opies Chapter 1 Orig Ö Copy Setting s Single-s ided orig inals Select th is settin g to copy s ingle-sid ed documen ts. Doubl e-sided or iginals Select th is settin g to copy do uble-side d documents . Single-s ided copies Select th is settin g to make s ingle-sid ed copies. Automati c d[...]

1 1.2 Avail able Featu res 1-8 CF 2002/CF3 102 Before Making C opies Chapter 1 Bound bo oklet co pies Select t his setti ng to make b ound book lets from the copi es. Single-s ided 4in 1 copies Select th is settin g to reduce fo ur document pages to fit one si ngle-sided copy p age. Doubl e-sided 4in1 copies Select t his setti ng to red uce eigh t [...]

1.2 Available Features 1 CF2002/CF3 102 1- 9 Before Making C opies Chapter 1 Photo Settings “ Text&Phot o ” setting Select th is settin g when cop ying doc uments con taining b oth text an d im- ages. “ Photo Im age ” setti ng Select th is settin g when cop ying photogra phs (docu ments) printe d on phot ographic paper. “ Printed Im a[...]

1 1.2 Avail able Featu res 1-10 CF 2002/CF3 102 Before Making C opies Chapter 1 Densty Setti ngs “ Backgro und ” param eter ( “ Density ” function) G This pa rameter ca n be used to adjust th e density of the back ground co lor for docum ents with a backgrou nd color. “ Density ” paramete r ( “ Density ” function) G This pa rameter [...]

1.2 Available Features 1 CF2002/CF3 102 1-11 Before Making C opies Chapter 1[...]

1 1.3 Nam es of Cont rol Panel Pa rts and The ir Functions 1-12 CF 2002/CF3 102 Before Making C opies Chapter 1 1.3 Names of Control Panel Parts and Their Functions No. Part Name Description 1 Touch p anel • Displays variou s screens an d message s See p. 1-20 2k e y p a d • Use to type in the numb er of copi es to be made. • Use to ty pe in [...]

1.3 Names of Contro l Panel Parts an d Their Fu nctions 1 CF2002/CF3 102 1-13 Before Making C opies Chapter 1 * Job: Any se t of consec utive ope rations, su ch as tho se for ma king copie s, scans or comput er printou ts 9 [Panel Rese t] key • Press to reset al l copy mode s and funct ions to th eir default settings. (A ll selected setting s* ar[...]

1 1.4 Adjus ting the Ang le of the Co ntrol Panel 1-14 CF 2002/CF3 102 Before Making C opies Chapter 1 1.4 Adjusting the Angle of the Control Panel The control pa nel can be a djusted to any of th ree angles . Adjust t he control panel to the angle that allows for easy operation.[...]

1.4 Adjusti ng the Ang le of the Co ntrol Panel 1 CF2002/CF3 102 1-15 Before Making C opies Chapter 1 To adjust the angle of th e control pane l 1 Pull the con trol panel rel ease leve r toward you, and t hen push down on the c ontrol pan el. 2 The angl e of the c ontrol pan el stops a t the midd le posit ion. 3 To adjus t the con trol panel to a n[...]

1 1.5 Tu rning the Copier On a nd Off 1-16 CF 2002/CF3 102 Before Making C opies Chapter 1 1.5 Turning the Copier On and O ff To turn the c opier on ➜ Set the po wer switch to “ I ” . When the copier is turned on 1 The indi cator on t he [Start] key l ights up in orange . A screen indicati ng that th e machine i s starting up appears. 2 After[...]

1.5 Turning the Cop ier On an d Off 1 CF2002/CF3 102 1-17 Before Making C opies Chapter 1 G The con ditions fo r all modes and funct ions automa tically returning to their de- fault settings ca n be spec ified usi ng the “ Auto Pane l Reset ” function on t he Us- er ’ s Choice: 1 screen. Fo r more details , refer to “ Sp ecifying Defa ult S[...]

1 1.5 Tu rning the Copier On a nd Off 1-18 CF 2002/CF3 102 Before Making C opies Chapter 1 To rec over from Sleep mode ➜ Press the [Sta rt] key. (The S leep mode c an also b e canceled by press ing any key on the op eration panel o r by touch ing the to uch panel.) Then, con tinue wit h the operatio ns described in “ When the co pier is turned [...]

1.5 Turning the Cop ier On an d Off 1 CF2002/CF3 102 1-19 Before Making C opies Chapter 1 To turn the c opier off 1 Touch [J ob Log] to check that no jobs are queued. 2 If any c opies or p rintouts re main in the outp ut tray, remov e them. 3 Set the po wer switch to “ O ” . ✎ Note Do not t urn off the copi er while it i s making co pies or p[...]

1 1.6 Us ing the Touc h Panel 1-20 CF 2002/CF3 102 Before Making C opies Chapter 1 1.6 Using the Touch Panel Description of the Touch Pa nel When th e copie r is turne d on (w hen the p ower switch is set to “ I ” ), th e screen shown below appears in the touc h panel. This scre en is the Basic screen. It sh ows, with messages a nd graphic s, t[...]

1.6 Usin g the Touc h Panel 1 CF2002/CF3 102 1-21 Before Making C opies Chapter 1 ✎ Tip The lang uage of th e displa ys in the touch pan el can b e changed using the “Languag e Selected ” function on the Admin . Mode: Admin . set screen . For more det ails, refe r to “Administr ator Mode Op erations” o f “Utility M ode Operati ons” in[...]

1 1.6 Us ing the Touc h Panel 1-22 CF 2002/CF3 102 Before Making C opies Chapter 1 Structure of the Display Sett ings s creen 5 Job display 6 Job Log screen 1 Message display 2 Screen tabs 4 Selected settings 3 Available functions/settings[...]

1.6 Usin g the Touc h Panel 1 CF2002/CF3 102 1-23 Before Making C opies Chapter 1 * Job: Any s et of conse cutive op erations, su ch as those for making copies, scans, or co mputer print outs, etc. Operating the Touch Pan el To acti vate a fun ction or to select a setting, l ightly touc h the des ired function or set- ting sh own on t he touch p an[...]

1 1.6 Us ing the Touc h Panel 1-24 CF 2002/CF3 102 Before Making C opies Chapter 1[...]

Basic Co py Operation s Chapter 2 2 2 Basic Copy Operations[...]

2 2.1 Mak ing Basic Copi es 2-2 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.1 Making Basi c Copies The procedure for m aking basi c copies is descri bed below. Check th at the [Copy ] key indi cator is li t in green and that the co pier is in Cop y mode. • If the [Sc an] key is lit in green, pr ess the [Copy] key. Press the [Panel Reset ][...]

2.1 Maki ng Basic C opies 2 CF2002/CF3 102 2- 3 Basic Co py Operation s Chapter 2 Make sure that the Zoom setting “ × 1. 000 ” is sele cted. • For details, refer to “ Specifying a Zoom Se tting ” (p. 5-8). Make sure that the P aper set ting “ Auto Paper ” is selected. • For details, refer to “ Selecti ng the P aper Setti ng ” ([...]

2 2.1 Mak ing Basic Copi es 2-4 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 Tou ch [Job Log]. • The pri nting stat us of t he progr ammed j ob and the job ’ s settings can be viewed. • For deta ils, refer to “ Contro lling Jobs ” (p. 6-1). To quit co pying, press the [Stop] ke y.[...]

2.2 Practical Copy Examples 2 CF2002/CF3 102 2- 5 Basic Co py Operation s Chapter 2 2.2 Practical Copy Ex amples Exampl es of various basic copy ope rations are de scribed b elow. Refer to the fol lowing pro cedures for d etails o n performing the vari ous copy o pera- tions. ✎ Note These e xplanatio ns assume that al l functions , such as those [...]

2 2.2 Pra ctical Cop y Examples 2-6 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 To make an enlarged c opy of the do cument An exam ple for ma king one single-sid ed 11 × 17-s ize enla rgement from a single- sided Letter-siz e original is describ ed below . Load the docum ent into the duplexin g documen t feed er. When loadin g the docu ment,[...]

2.2 Practical Copy Examples 2 CF2002/CF3 102 2- 7 Basic Co py Operation s Chapter 2 To ma ke a reduce d copy of the document An exam ple for ma king one single-sid ed Letter-s ize reductio n from a s ingle-sided 11 × 17-s ize origi nal is desc ribed bel ow. Load the document into the duplex ing docume nt feeder. When loadin g the docu ment, load i[...]

2 2.2 Pra ctical Cop y Examples 2-8 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 To reduce paper use An exam ple for co pying four single- sided Letter-s ize doc uments onto one singl e- sided Letter-siz e page is de scribed b elow. Load the docum ent into the duplexin g documen t feed er. When lo ading the document , load it so that the sid e[...]

2.2 Practical Copy Examples 2 CF2002/CF3 102 2- 9 Basic Co py Operation s Chapter 2 To make copies fro m a book or m agazine An exam ple for ma king two s eparate sing le-sided Letter C-siz e copies fro m an open Le tter-size b ook is descri bed below. 1 2 2 1 Pos itio n the book face do wn ont o the ori gin al glas s. When po sitioning the docum e[...]

2 2.2 Pra ctical Cop y Examples 2-10 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 To co py a postcard An exam ple for ma king a s ingle-sided copy from a singl e-sided pos tcard onto a postca rd loaded into the m anual by pass tray is describ ed below. Position the p ostcard document face down o nto the origina l glass. When posi tioning the d[...]

2.2 Practical Copy Examples 2 CF2002/CF3 102 2-11 Basic Co py Operation s Chapter 2 Prepare one postc ard. Load the postcar d into the m anual bypass tray w ith the top of th e postcard enterin g the feed slo t and th e sid e to be pr inte d onto f acing do wn. (T he sid e wher e the addre ss is written sh ould face u p.) Adjust the paper gu ides t[...]

2 2.3 Stoppi ng Printing 2-12 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.3 Stopping Printing A job ca n be canc eled whil e it is be ing printe d. To stop/res tart/delete a p rint job 1 Pres s the [ Stop ] key wh ile t he job is bei ng pri nt ed. The p rint ing stops . The mess age “ Job has been st opped. ” ap- pears. 2 To conti nue p[...]

2.3 Stopping Printi ng 2 CF2002/CF3 102 2-13 Basic Co py Operation s Chapter 2[...]

2 2.4 Interru pting a Cop y Job 2-14 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.4 Interrupting a Copy Job The job being pri nted can b e interrupt ed. This m ode is c onvenient for pausin g the cu rrent copy job in o rder to make a quick copy o f a differen t docume nt. For de tail s on pri orit izi ng a copy job s o that it will b e prin [...]

2.4 Interrup ting a Co py Job 2 CF2002/CF3 102 2-15 Basic Co py Operation s Chapter 2 7 If the job that pri nting was inte rrupted for is ready for pri nting, the int errupted job stops b eing print ed and the job that p rinting w as interrupte d for is pri nted. When pri nting is f inished, the job that p rinting was interrupted for is remov ed fr[...]

2 2.5 Maki ng Test C opies (Co py 1 Set) 2-16 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.5 Making Test Copies (Copy 1 Set) Before pr inting a large num ber of copie s, a sample copy can be printe d so you can check the specifi ed settin gs. This is conveni ent for che cking the s elected s ettings befor e pri nti ng. If a j ob is curren tl[...]

2.5 Maki ng Test C opies (Cop y 1 Set) 2 CF2002/CF3 102 2-17 Basic Co py Operation s Chapter 2 6 If the rem aining n umber of copi es cann ot be made with the curren t settings, touch [N o]. The rema ining num ber of co pies of th e job for the te st print i s cancel ed. The me ssage “ Job has been do ne improp erly. Check the re cord. ” ap- pe[...]

2 2.6 Mak ing Copies Using Acc ounts 2-18 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.6 Making Copies Using Accounts Using the “ Copy Track” Function The total number of co pies allowe d and the cop ies allowe d for certain siz es can be set for u p to 99 ac counts. G If t he “ Copy Trac k ” function is used, printi ng is only pos s[...]

Loading P aper Chapter 3 3 3 Loading Paper[...]

3 3.1 Pape r Specific ations 3-2 CF 2002/CF3 102 Loading P aper Chapter 3 3.1 Paper Specifica tions Use p aper that mee ts the fol lowing spe cificati ons. Paper Type s Paper T ype Plain Pape r Thick Paper 1 Thick Paper 2 Thick Paper 3 Weight ( lbs.) Paper So urce, Etc. 17 lbs. to 2 4 lbs. 24-1/4 lbs. to 40 lbs. 40-1/4 lbs. to 55-1/2 l bs. 55-3/4 l[...]

3.1 Paper Specific ations 3 CF2002/CF3 102 3- 3 Loading P aper Chapter 3 Paper Sizes Non-st andard paper: Standard pap er: Paper S ource Paper W idth Paper Length Manual by pass tra y 3-9/16 in. to 12-1/4 in. 5-1/2 in. to 18 in. 1st draw er 2nd draw er —— Paper feed unit *1 Large ca pacity cab inet *1 —— Paper S ize Paper S ource, Etc. 12.2[...]

3 3.1 Pape r Specific ations 3-4 CF 2002/CF3 102 Loading P aper Chapter 3 Paper Capac ity *1 The pape r feed uni t and large capacit y cabine t are optio nal. *2 If the optional dup lex unit is used to make d ouble-si ded copie s, only cert ain types o f paper ca n be used . *3 If the optional f inisher is us ed to sort, punch hol es and staple , o[...]

3.1 Paper Specific ations 3 CF2002/CF3 102 3- 5 Loading P aper Chapter 3 ✎ Note The f ollowing ty pes of pa per shoul d not be u sed, otherwi se decre ased print quality or paper m isfeeds ma y occur. Overhe ad transparen cies that have al ready been fed through the copi er (even if th e tran spar ency is still bla nk) Paper that has been printed[...]

3 3.2 Print Area 3-6 CF 2002/CF3 102 Loading P aper Chapter 3 3.2 Print Area Any part of the ima ge within t he area in dicated b elow is no t printed. G A mar gin 0.2 in. (5 mm) from t he leading e dge of the paper (A) G A mar gin 0.12 in. (3 mm) from the trailing e dge of the paper (B) G A margin 0.1 2 in. (3 mm) on both sides of the pape r (C) ([...]

3.4 Automatic ally Selecti ng the Paper Source 3 CF2002/CF3 102 3- 7 Loading P aper Chapter 3 3.4 Automatically Selecting the Paper Source If the sele cted paper d rawer runs o ut of paper while a print job is being copi ed and a differe nt paper d rawer is loaded with paper m eeting th e followin g condit ions, the othe r paper drawer is a utomati[...]

3 3.5 Loadi ng Paper 3-8 CF 2002/CF3 102 Loading P aper Chapter 3 3.5 Loading Paper Loading Pa per Into th e 1st Drawer 1 Pull out the paper d rawer for t he 1st drawer. 2 Press do wn on the p aper-liftin g plate un til it loc ks into place. ✎ Note Be careful not to touc h the sur- face of the paper take-u p roller with y our hands. 3 Slide the l[...]

3.5 Loading Paper 3 CF2002/CF3 102 3- 9 Loading P aper Chapter 3 5 Load the pap er into the dr awer so that the side of th e paper to b e print ed onto (the s ide facing up when t he packa ge was un- wrappe d) faces u p. 6 When ma king man ual doub le-sid- ed copi es, load the paper so t hat the sec ond side (the blank side ) face s up. ✎ Note If[...]

3 3.5 Loadi ng Paper 3-10 CF 2002/CF3 102 Loading P aper Chapter 3 ✎ Tip When loa ding 4 × 6 L pape r, load them with the short er side as the l eading ed ge, as sh own. ✎ Note Do no t load 4 × 6 L paper crossw ise, as shown. ✎ Tip After pr essing down t he enve- lopes t o make sure that all ai r is remo ved and m aking sure that t he folds[...]

3.5 Loading Paper 3 CF2002/CF3 102 3-11 Loading P aper Chapter 3 ✎ Note Do not load enve lopes cros s- wise, as show n. ✎ Tip When loa ding ove rhead pr o- jector tra nsparenc ies, load them with the longe r side as the lead ing edge, as show n. ✎ Note Do no t load overh ead proje ctor transpare ncies leng thwise.[...]

3 3.5 Loadi ng Paper 3-12 CF 2002/CF3 102 Loading P aper Chapter 3 7 If pap er of a non-st andard size h as been lo aded, sli de the lat eral guides against the edges of the loaded pap er. 8 Close the paper dra wer. 9 Turn t he media typ e selec tion dial to the set ting for the type of pa per loaded. ✎ Tip If po stcards are l oaded, se t the med[...]

3.5 Loading Paper 3 CF2002/CF3 102 3-13 Loading P aper Chapter 3 Setting the P aper Size for the 1s t Drawer Since th e size of the paper loaded into t he 1st drawer is a utomaticall y detecte d, it is usu ally not necessary t o set the p aper siz e. However, i t may be n ecessar y to set the p aper size if the pap er size is n ot automa t- ically [...]

3 3.5 Loadi ng Paper 3-14 CF 2002/CF3 102 Loading P aper Chapter 3 To set a paper size i n metric mea surements 1 Touch [P aper]. A screen that shows the spec ified pap er size set tings app ears. 2 Select th e 1st drawe r, and then touch [Size C hange]. 3 Touch [M etric]. The I nput screen a ppears with paper si zes in metri c measur ements. 4 Sel[...]

3.5 Loading Paper 3 CF2002/CF3 102 3-15 Loading P aper Chapter 3 6 Touch . 7 Touch and to select th e length of side Y for th e paper th at is loa ded. ❍ Touch until the cursor moves b elow the frac tion that you wis h to change. The ente red length of side Y appe ars. 8 Touch [En ter], and th en touch [Enter] in th e Input sc reen. 9 The pape r [...]

3 3.5 Loadi ng Paper 3-16 CF 2002/CF3 102 Loading P aper Chapter 3 ❍ Touch until the curso r moves b elow the fra ction that you wi sh to change . The ente red length of side Y app ears. 8 Touch [S ize Reg istration] . 9 Touch e ither [1] or [2]. 10 Touch [E nter], an d then touch [Enter] in th e Input sc reen. The cus tom pape r size is stored. [...]

3.5 Loading Paper 3 CF2002/CF3 102 3-17 Loading P aper Chapter 3 Loading Pa per Into the 2nd Drawer or a Paper Fe ed Unit 1 Pull out the paper draw er. 2 Press do wn on the pa per-lifting plat e unti l it lo cks i nto pl ace. ✎ Note Be car eful not to touc h the sur- face of th e pa per ta ke-up roll er with y our hands. 3 Remove the trai ling-ed[...]

3 3.5 Loadi ng Paper 3-18 CF 2002/CF3 102 Loading P aper Chapter 3 5 Load the pap er into the draw er so that the side of th e paper to be prin ted on to (t he sid e faci ng up when the pac kage was un- wrappe d) faces u p. ✎ Note If the pap er is cur led, flatte n it before lo ading it. Do not load so muc h paper that t he top of the stack is hi[...]

3.5 Loading Paper 3 CF2002/CF3 102 3-19 Loading P aper Chapter 3 Loading Pa per Into the La rge Capacity Cab inet 1 Pull out the paper draw er. 2 Load pap er in to the r ight sid e of the drawer so that the fron t side of the paper (the si de facing up when the pack age was un wrappe d) faces up. ✎ Note If the pap er is curled , flatten it before[...]

3 3.5 Loadi ng Paper 3-20 CF 2002/CF3 102 Loading P aper Chapter 3 “ Special ty Paper ” function The pap er loaded into the la rge capac ity cabine t (3rd draw er) can be spe cified a s spec ial pa per. If the p aper in a drawer is spe cified as special pape r, the paper in tha t drawer is not automa tically s elected w ith the Pape r setting ?[...]

3.5 Loading Paper 3 CF2002/CF3 102 3-21 Loading P aper Chapter 3 Loading Pa per Into the M anual Bypass Tray Paper ca n be fed m anually through th e manual by pass tray if you wi sh to cop y onto paper th at is not l oaded into a drawer, o r if you wish to copy on to special paper. 1 Touch [Pa per]. A screen that shows the specifi ed paper s ize s[...]

3 3.5 Loadi ng Paper 3-22 CF 2002/CF3 102 Loading P aper Chapter 3 8 Touch [E nter]. 9 Touch [P aper Type] . The Pape r Type sc reen appea rs. 10 Select th e setting for the type of paper t hat is load ed. 11 Touch [E nter]. 12 Open th e manual by - pass tr ay. 13 Prepar e one sheet o f the pape r. 14 Load the paper int o the manu al bypass tray so[...]

3.5 Loading Paper 3 CF2002/CF3 102 3-23 Loading P aper Chapter 3 ✎ Tip Before loadin g envelopes , press t hem down to make sure that all air is remov ed, and make sure that the folds of the flaps are firmly pr essed, othe r- wise t he envel opes may be - come wr inkled or a paper misfee d may occu r. Load the envelop es with th e shorter s ide a[...]

3 3.5 Loadi ng Paper 3-24 CF 2002/CF3 102 Loading P aper Chapter 3 ✎ Tip When loa ding Overhe ad Pro- jector Tr anspar encies, loa d them with the longe r side as the lead ing edge, as show n. ✎ Note Do not load Overhe ad Projec- tor Transp arencies Le ngth- wise, as shown. 15 Adjust th e paper gu ides to fit th e size o f paper tha t is loade [...]

Original Doc uments Chapter 4 4 4 Original Documents[...]

4 4.1 Do cument F eeding 4-2 CF 2002/CF3 102 Original Doc uments Chapter 4 4.1 Document Feeding The doc ument ca n be fed in one of two di fferent wa ys. Be sure to position the doc- ument c orrectly accordin g to the ty pe of docume nt being copied. Document T ypes ✎ Note Be sure t o use the documen t paper ty pe appropr iate for the feed met ho[...]

4.1 Docume nt Feeding 4 CF2002/CF3 102 4- 3 Original Doc uments Chapter 4 Multi-s heet feedi ng (Docum ent of mixed sizes) Mixed Or iginals Paper Siz es Possib le combinat ions for m ixed origina l paper s izes 2 : Possible — : Not possible Singl e-sided documen ts Doubl e-sid ed docu ments Docume nt paper type Plain paper: 13 -1/4 lbs . to 29-1/[...]

4 4.1 Do cument F eeding 4-4 CF 2002/CF3 102 Original Doc uments Chapter 4 Docum ent Precautions (M ulti-Sheet Feed ing) The foll owing types of docu ments shou ld not be used, otherwis e paper misfeed s or damage to the do cument m ay occur. Instead, th ese type s of doc uments s hould be fed man ually. G Rolle d docume nts G Wrin kled or tor n do[...]

4.2 Feedin g the Do cument 4 CF2002/CF3 102 4- 5 Original Doc uments Chapter 4 4.2 Feeding the Document Multi-Shee t Feeding The d uplexing do cument fe eder feeds in, scan s, then au tomatically feeds ou t each page in a multi-page document, on e page at a time. The corre ct type of do cument must b e loaded i n order for t he duplex ing docu ment[...]

4 4.2 F eeding th e Document 4-6 CF 2002/CF3 102 Original Doc uments Chapter 4 6 Touch [O riginal Direc tion]. The Or iginal Directi on sc reen appears . 7 Select th e setting appropriate fo r your doc ument, and th en touch [Enter]. ❍ If the ori entation o f the docu ment is d ifferent fro m that of t he selected Orig- inal D irection set ting, [...]

4.2 Feedin g the Do cument 4 CF2002/CF3 102 4- 7 Original Doc uments Chapter 4 12 When rem oving la rge-sized do cu- ments, carefully lift up th e docu- ment fee d tray (of t he duplex ing doc ument feede r) as far as poss i- ble. 13 Remove the doc uments from the docume nt output t ray. 14 Careful ly lower the docu ment feed tray. CAUTION Do not p[...]

4 4.2 F eeding th e Document 4-8 CF 2002/CF3 102 Original Doc uments Chapter 4 To feed do cuments of m ixed size s Docu ments of various s tandard-si zed page s can be scanned and copi ed as a set using the dup lexing doc ument feeder. The combinatio ns of p aper si zes that can be used w ith the “ Mi xed Ori g Detecti on ” functio n are show n[...]

4.2 Feedin g the Do cument 4 CF2002/CF3 102 4- 9 Original Doc uments Chapter 4 5 In th e Basic sc reen , touch [M ixed Orig Detection]. 6 Select the desired co py setting s, and the n press th e [Start] key. The topm ost page of the docume nt is fed in and sc anning be gins.[...]

4 4.2 F eeding th e Document 4-10 CF 2002/CF3 102 Original Doc uments Chapter 4 Manua l Fe edin g Place the document di rectly on the ori ginal glass, and then it is sc anned. Each page of the d ocument m ust be p ositioned m anually (i.e ., the pr evious one must be re - moved and the ne xt one pl aced on t he origina l glass) . This m ethod is be[...]

4.2 Feedin g the Do cument 4 CF2002/CF3 102 4-11 Original Doc uments Chapter 4 4 <For tr ansparent or translucen t docume nts> Place a b lank she et of paper of the same siz e as the d ocument ov er the doc ument. 5 <For boun d docume nts spread o ver two f acing pages , such as a book or m ag- azi ne> Position the top of the boo k towa[...]

4 4.2 F eeding th e Document 4-12 CF 2002/CF3 102 Original Doc uments Chapter 4 7 Touch [O rig Ö Copy]. The Or iginal Ö Copy screen appears. 8 Touch [O riginal Direction]. The Origi nal Directi on screen ap pears. 9 Select th e setting appropri ate for your docum ent, and th en touch [En ter]. ❍ If the ori entation o f the docume nt is dif- fer[...]

4.2 Feedin g the Do cument 4 CF2002/CF3 102 4-13 Original Doc uments Chapter 4 12 When us ing a mod e where m ultiple docu- ments are to be scanne d, such as w hen making 2in1 copies , the messag e sh own at t he right app ears. 13 To contin ue scannin g, remove the document, po sition the ne xt page of the doc - ument o n the origi nal glas s, and[...]

4 4.2 F eeding th e Document 4-14 CF 2002/CF3 102 Original Doc uments Chapter 4[...]

Specify ing Copy Settings Chapter 5 5 5 Specifying Copy Settings[...]

5 5.1 Selec ting a Colo r Setting 5-2 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 The settings for the Copy mode ca n be chan ged to fit y our need. This c hapter exp lains how these se ttings can b e changed . 5.1 Selecti ng a Color Sett ing The Color settin g is selec ted when copies are being mad e. There are three Color settings . G Aut[...]

5.2 Selecti ng a Fini shing Sett ing 5 CF2002/CF3 102 5- 3 Specify ing Copy Settings Chapter 5 5.2 Selecting a Finishing Setting Various settin gs for sorting and finis hing cop ies are a vailable. ✎ Tip The Finis hing setting s can be used together w ith other functi ons. For det ails, re- fer to the “ Function Combinat ion Table ” in the Ad[...]

5 5.2 Select ing a F inishing Sett ing 5-4 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Non-Sorting ( “ No n-Sort ” Setting) The copies are fe d out and stacked on top of e ach other as they are p rinted. Crisscro ss Non-Sortin g ( “ No n-So rt ” Setti ng) The cop ies are fe d out in a n alternating crisscross pattern. Howev er, cris[...]

5.2 Selecti ng a Fini shing Sett ing 5 CF2002/CF3 102 5- 5 Specify ing Copy Settings Chapter 5 G The “ Cris s Cross M ode ” functio n on the User ’ s Cho ice: 2 screen must be set to “ Yes ” . ❍ For detai ls on the “ User ’ s Choice ” functions, refer to “ Spec ifying Defaul t Set- tin gs ( “ Use r ’ s Choic e ” Functions [...]

5 5.2 Select ing a F inishing Sett ing 5-6 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 G If nonst andard- size paper i s used, th e paper wid th must be be tween 7- 1/4 in. and 11-3/4 in. G If nonst andard- size paper i s used, th e paper lengt h must be between 7-1 /4 in. and 17 in. G The copier mu st not enter Interrupt mode. To speci fy [...]

5.2 Selecti ng a Fini shing Sett ing 5 CF2002/CF3 102 5- 7 Specify ing Copy Settings Chapter 5 ✎ Note If a stap ling or hole-punchi ng settin g is sele cted, be sure to loa d the doc u- ment so that it is position ed correc tly. If the docum ent is not po sitioned correctly , the staples or punched holes will not be po sitioned correctly . The co[...]

5 5.3 Speci fying a Zo om Setting 5-8 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5.3 Speci fying a Zoom Setting Copi es of do cum ents ca n be en larg ed or r educ ed. There are eight w ays to chan ge the zoo m ratio. G Automati c scaling ( “ Auto Size ” s etting) G Full size ( “ × 1.0 00 ” setting) G Enlargin g ( “ Enlarge ” [...]

5.3 Specify ing a Zoom Setting 5 CF2002/CF3 102 5- 9 Specify ing Copy Settings Chapter 5 Minimiz ing ( “ Minima l ” Setting) The co py is slight ly re duce d ( × 0.930). G Selectin g the “ Minima l ” settin g ensures th at any part of the orig inal positi oned at the ed ge of the p age will n ot be cut off i n the copy. G The zoo m ratio o[...]

5 5.3 Speci fying a Zo om Setting 5-10 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Specifying a Custom Zoom Ratio ( “ CustomZoo m ” Setting) To en ter a custom z oom ratio 1 Touch [Z oom]. A screen appears, showin g the availa ble Zoom settings. 2 Touch [C ustomZ oom]. 3 Using the keypad , type in th e desired zo om ratio (b etween × 0[...]

5.3 Specify ing a Zoom Setting 5 CF2002/CF3 102 5-11 Specify ing Copy Settings Chapter 5 To re call a stor ed cu stom zoom r ati o 1 Touch [Z oom]. A screen appears, showing th e availab le Zoom set tings. 2 Touch [C ustomZoom ]. 3 Touch [Se t]. 4 Touch [1 ], [2] or [M inimal]. 5 Touch [En ter]. The en tered zoom ra tio is recal led. To specif y di[...]

5 5.4 Sele cting the Paper Setting 5-12 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5.4 Selecting the P aper Setting The paper used fo r making copies c an be se lected. There are three wa ys of selec ting the p aper. G Auto matic paper selec tion ( “ Auto Paper ” setting ) G Manual paper sel ection G Manual bypass tray selecti on ( “[...]

5.4 Selec tin g the Pa per S etti ng 5 CF2002/CF3 102 5-13 Specify ing Copy Settings Chapter 5 Small-Size d Documents If a docum ent that is too small to be autom aticall y detected is loaded with the Paper setti ng “ Auto Paper ” sel ected, co pies canno t be ma de. However, chang ing the setting of the “ Aut o-select Pape r for Small O rigi[...]

5 5.4 Sele cting the Paper Setting 5-14 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Auto Paper Sou rce Selection Feat ure If the selected pap er drawer ru ns out of pa per during pr inting and a different pap er drawer is load ed with p aper mee ting the following conditio ns, the othe r paper d raw- er is au tomatica lly sel ected so print[...]

5.5 Selecti ng the O rig > Copy Se ttings (Origi nal Settin gs) 5 CF2002/CF3 102 5-15 Specify ing Copy Settings Chapter 5 5.5 Selecting the O rig > Copy Settings (Original Set- tings) The t ype of ori ginal and the desired t ype of co py can b e specifi ed. In addi tion, the d ocument orientatio n and the positio n of the b inding margi n can[...]

5 5.5 S elect ing t he Ori g > Copy Sett ings ( Origi nal S etting s) 5-16 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Book se paration ( “ S eparation ” setting of the “ Book ” p arameter) Select th ese setti ngs to mak e a singl e-sided copy of each of the two pages of an open b ook. Book sprea d ( “ Book Spre ad ” setting [...]

5.5 Selecti ng the O rig > Copy Se ttings (Origi nal Settin gs) 5 CF2002/CF3 102 5-17 Specify ing Copy Settings Chapter 5 To sp ecify an Ori ginal setting 1 Touch [O rig Ö Copy]. The Orig inal Ö Copy scr een appea rs. 2 Select th e setting for the typ e of docu ment to be copied. 3 If “ Book ” is selecte d, a scr een showi ng the availa bl[...]

5 5.5 S elect ing t he Ori g > Copy Sett ings ( Origi nal S etting s) 5-18 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 7 If the setti ngs for frame-era sing or cen ter- & frame-erasin g are selected, touch and to s peci fy th e wid th of the area to b e era sed. The w idth of t he area erased with the center-era sing sett ing is no t[...]

5.5 Selecti ng the O rig > Copy Se ttings (Origi nal Settin gs) 5 CF2002/CF3 102 5-19 Specify ing Copy Settings Chapter 5 12 To spec ify a non -stan- dard size, touc h [Ph oto Size or Custom S ize], and t hen specify the size of the d ocumen t. 13 Touch . 14 Touch and to spec ify the le ngth of side X f or the docum ent that is being cop ied (be[...]

5 5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5-20 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5.6 Selecting the O rig > Copy Settings (Copy Settings) The type of ori ginal and the desired type of co py can b e specif ied. In add ition, the docum ent orienta tion and t he positi on of the b inding margi n can al so b[...]

5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5 CF2002/CF3 102 5-21 Specify ing Copy Settings Chapter 5 Copy Settings Single-s ided copy ( “ 1 ” setting) Select t his setti ng to make s ingle-sided copies . Doubl e-sided cop y ( “ 2 ” setting) Select t his setti ng to use the duple x unit to make dou ble-sided copies. Wit[...]

5 5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5-22 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Doubl e-sided 4in1 copy ( “ 2-4in1 ” setting ) Select thi s settin g to reduc e eight doc ument pa ges to fit on e double -sided copy page. If the “ 2-4in1 ” setting is sele cted, the s ize of th e original is autom at[...]

5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5 CF2002/CF3 102 5-23 Specify ing Copy Settings Chapter 5 Booklet -binding ( “ Bo oklet C reation ” setti ng) Sele ct this setti ng to bind copies w ith stapl es and fold t hem along the center. (The copies will be ma de into a booklet.) ✎ Note If less than 4 doc ument pages are[...]

5 5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5-24 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 To sp ecify a Copy setting 1 Touch [O rig Ö Copy]. The Or iginal Ö Copy s creen appea rs. 2 Sele ct the de sire d Copy setti ng. 3 To sele ct 4in1 c opying o r booklet copying, touch [4i n1/Booklet]. The 4 in1/Booklet screen[...]

5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5 CF2002/CF3 102 5-25 Specify ing Copy Settings Chapter 5 7 If “ Bind ” is selec ted, [Center Erase] appears . ❍ As a defa ult, “ Center Erase ” is selec ted. 8 If you do not wis h to use center-er asing, tou ch [Center Eras e] to cancel it. 9 Touch [En ter]. The O riginal ?[...]

5 5.7 Selec ting the Orig > C opy Settin gs (Origina l Direction an d Margin Position Set tings) 5-26 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5.7 Selecting the O rig > Copy Settings (Original Direc- tion and Margin Position Settings) The type of ori ginal and the desired type of co py can b e specif ied. In add ition, the docum en[...]

5.7 Selec ting the Orig > Co py Settings (Or iginal D irection and M argin Po sition Setting s) 5 CF2002/CF3 102 5-27 Specify ing Copy Settings Chapter 5 Selecting t he Document O rientation ( “ Original Directi on ” Setting) The or ientation o f the document can be spec ified. Sele ct the setti ng appropri ate for your do cument or ientati [...]

5 5.7 Selec ting the Orig > C opy Settin gs (Origina l Direction an d Margin Position Set tings) 5-28 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Specifying the Document B inding Margin Position ( “ Margin ” Setting) If a do cument with a binding margin is b eing copi ed, the pos ition of the binding m ar- gin can be specifie d. Sele[...]

5.7 Selec ting the Orig > Co py Settings (Or iginal D irection and M argin Po sition Setting s) 5 CF2002/CF3 102 5-29 Specify ing Copy Settings Chapter 5 To specif y conditi ons for the origin al As a def ault, no s etting is selected . 1 Touch [O rig Ö Copy]. The Orig inal Ö Copy scr een appea rs. 2 Touch [O riginal Di rec- tion]. Th e Origin[...]

5 5.7 Selec ting the Orig > C opy Settin gs (Origina l Direction an d Margin Position Set tings) 5-30 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5 Select th e setting appropriate fo r your doc ument, and th en touch [Enter]. ❍ If the po sition of the bi nding marg in for the docum ent is diffe rent from that of the sel ected Ma rgin s[...]

5.8 Selecti ng a Photo /Density Se tting 5 CF2002/CF3 102 5-31 Specify ing Copy Settings Chapter 5 5.8 Selecting a Photo/Density Setting The t ype of ori ginal can be specifi ed. There are twelve document ty pes. G Text combine d with ima ges ( “ Text&P hoto ” setting) G Photograp hs ( “ Photo Imag e ” setting ) G Printed ph otos ( “ [...]

5 5.8 Selec ting a Pho to/Density Setting 5-32 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Specifying the Image T ype ( “ Photo/De nsity ” Settings) “ Text & Photo ” setting Select this setting when copy ing docu ments co ntaining both text and images. “ Photo Im age ” setting Select t his sett ing when copying docume nts (p[...]

5.8 Selecti ng a Photo /Density Se tting 5 CF2002/CF3 102 5-33 Specify ing Copy Settings Chapter 5 Specif ying the Densi ty Parameters Manual backgrou nd densi ty G One of ei ght densi ty setting s can be sele cted for the d ensity of the backgr ound color of documen ts. G Each tim e [Lighter] or [Darker] i s touche d, the backg round dens ity is l[...]

5 5.8 Selec ting a Pho to/Density Setting 5-34 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 To selec t a Photo/De nsity setting 1 Touch [P hoto/Den sity]. The Photo /Densit y screen appears. 2 Select th e setting for the typ e of docum ent to be copi ed. 3 If [Text] is touch ed, the key f or the “ Dot Matri x Original ” para meter ap- pe[...]

5.8 Selecti ng a Photo /Density Se tting 5 CF2002/CF3 102 5-35 Specify ing Copy Settings Chapter 5 8 Touch [De nsity]. The De nsity screen a ppears. 9 Touch [Li ghter] or [Darker] to s elect the des ired back ground den sity lev el. 10 Touch [Au to]. The auto matic ba ckground density setting is selec ted. 11 Touch [En ter].[...]

5 5.8 Selec ting a Pho to/Density Setting 5-36 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 To selec t a glossy fi nish ( “ Glo ssy Mo de ” setting) 1 Touch [P hoto/Den sity]. The Photo/Dens ity screen a ppears. 2 Touch [G lossy Mo de]. To selec t a Screen Pattern setting If moire patterns ap pears in the copi ed image, c hange the Scree[...]

5.9 Checki ng the Settings 5 CF2002/CF3 102 5-37 Specify ing Copy Settings Chapter 5 5.9 Checking the Settings The Co py mode settings can be c hecked o r changed . There are three scre ens that a llow you to c heck the settings. To ch eck the settings 1 Pres s the [Mo de Chec k] key on the opera tion pane l. 2 The fi rs t scre en show ing t he c u[...]

5 5.9 Ch ecking the Se ttings 5-38 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 4 Touch [N ext] to displ ay the thi rd screen of s ettings. 5 To chan ge a setti ng: ❍ Touch th e setting that you wi sh to cha nge. The c orresponding screen a p- pears. ❍ Chang e the setting as desired. ✎ Tip The corre sponding sc reens for the “ Scan t[...]

Controlli ng Jobs Chapter 6 6 6 Controlling Jobs[...]

6 6.1 Desc ription o f Jobs 6-2 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 6.1 Descripti on of Jobs Job Any se t of cons ecutive o perations , such as t hose for m aking copi es, scans or com- puter pri ntouts Multi-job featu re G While o ne job is being pri nted, ano ther job c an be que ued. As many as 49 jo bs can be queued. G When one job i s [...]

6.1 Desc ription o f Jobs 6 CF2002/CF3 102 6- 3 Controlli ng Jobs Chapter 6 To change the status o f a queued jo b The sta tus of job s marked as “ Wa iting Print ” can be c hanged. Chang e the stat us accordin g to the pro cedure de scribed b elow. 1 Touch e ither [Job Log] or [Jo b Control] to display the queu ed jobs. 2 Select t he job w hos[...]

6 6.2 Job L og Scree ns 6-4 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 6.2 Job Log Screens The list and deta ils of qu eued jobs can be vie wed. The following f ive Job L og scree ns provid e a variet y of func tions. Print List Scre en The pr ogra mmed de tail s of a pr int job c an be vi ewed. Touch [Jo b Log]. The Print Li st screen appears. Jo[...]

6.2 Job Lo g Screens 6 CF2002/CF3 102 6- 5 Controlli ng Jobs Chapter 6 Scan List S creen The p rogrammed de tails of scan job s can be vi ewed. Touch [Scan List] . The Scan List scre en appear s. Jobs q ueued to b e printed a ppear in or der from th e top of th e list. Touch [Basi c] to d isplay the Basic sc reen agai n. The f ollowing d etails of [...]

6 6.2 Job L og Scree ns 6-6 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 Job List Sc reen The settings of progr ammed jobs can be v iewed. Touch [Jo b List]. Th e Job Lis t screen appears. Jobs t hat have b een programm ed appear in order fro m the top of the list. Howev er, jobs pr ogrammed in user boxe s are not displaye d. Touch [Bas ic] to displ[...]

6.2 Job Lo g Screens 6 CF2002/CF3 102 6- 7 Controlli ng Jobs Chapter 6 Print Log Scree n A log of all print j obs can be v iewed. Touch [Print Log]. T he Print Log screen a ppears. All jobs that hav e been printed are disp layed. In addition, the jobs can be divi ded into se parate lis ts of thos e that hav e finish ed being p rinted and those tha [...]

6 6.2 Job L og Scree ns 6-8 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 11 Job statu s Displays d etails o f any er rors that may have occu rred w hile the job w as bei ng per forme d No. Item Name Desc ription[...]

6.2 Job Lo g Screens 6 CF2002/CF3 102 6- 9 Controlli ng Jobs Chapter 6 Scan Log Sc reen A log of all scan jobs ca n be view ed. Touch [Scan Log]. The Scan L og screen appears. All jobs that have b een scan ned are dis played. In addition , the jobs can b e divide d into se parate lis ts for thos e that hav e finish ed being scanned and those that h[...]

6 6.3 Jo b Con trol Scr eens 6-10 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 6.3 Job Control Scr eens The statu s of a program med job c an be chang ed and the job ca n be prior itized for outpu t. The foll owing six Job Contro l screens p rovide a v ariety of functions. Scanned J ob Screen Scanned jobs sto red in the memory can be pri nted. Touch[...]

6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-11 Controlli ng Jobs Chapter 6 To print scann ed data (move it from the list on the Scanne d Job screen to th e Print Lis t screen) 1 Select the job that you wish to prin t from the Scanne d Job scree n. To print mul - tiple jo bs, conti nue selecti ng all jo bs that y ou wish to print. 2 Touch [O K]. Th[...]

6 6.3 Jo b Con trol Scr eens 6-12 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 Unlock Job Screen Jobs loc ked with the “ Locked Job ” functio n can be printed. Touch [U nlock Job ]. The Unlock J ob screen appears. Stored jo bs lock ed with “ Loc ked Job ” function are listed. Locke d jobs appea r in order fro m the top of t he list. The prog[...]

6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-13 Controlli ng Jobs Chapter 6 To unlock a job (to print a locked doc ument) 1 Select the job t hat you wish to unlock . To unl ock multip le jobs , continu e select - ing all jobs that you wi sh to unlo ck. 2 Using the keypad , enter the f our-digit u nlockin g code. ❍ For the un locking code, cons ul[...]

6 6.3 Jo b Con trol Scr eens 6-14 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 Increa se Priority Screen Queue d jobs can b e prioritiz ed so tha t they will be printed be fore other j obs. If the job currently bein g printed ca n be interrup ted, printin g is interrupt ed and print- ing of t he prio ritized job b egins. Prin ting of th e interrupte[...]

6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-15 Controlli ng Jobs Chapter 6 To incr ease the priority of (print) a job 1 Select th e job that you wi sh to prior itize. 2 Touch [O K]. The job i s move from th e Increase Prio rity list t o the list o f jobs to be prin ted, and the job is queued for printin g. 3 Touch [J ob Log], a nd chec k the stat [...]

6 6.3 Jo b Con trol Scr eens 6-16 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 Combine J obs Screen A stored jo b can be com bined with an other job, an d the two jobs c an be printed as one. Up to five jobs c an be combi ned. If any of the followin g settings are specifi ed for the jobs that are to be combin ed, the setting s for all jobs change to[...]

6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-17 Controlli ng Jobs Chapter 6 The f ollowing d etails of the jobs are displaye d. No. Item Nam e Description 1 Job numbe r Jo b iden tifi cati on num ber as sign ed whe n the jo b is pr ogram med 2 Up/do wn arrow s When th ere are more than five jobs , press thes e arro ws to display jobs higher or lo w[...]

6 6.3 Jo b Con trol Scr eens 6-18 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 To co mbine jobs 1 Select th e job tha t you wish to combi ne other jobs with. 2 Select th e jobs th at you wish to combine wit h the first job selecte d. ❍ To com bine mo re than two jobs, repeat t he above step u ntil all jobs that you wish to combine are se lected . [...]

6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-19 Controlli ng Jobs Chapter 6 UserB ox Screen Jobs p rogrammed in user box es can be pri nted. ✎ Note The “ User Box ” fun ction is only ava ilable if the hard d isk is ins talled. Touch [UserBo x]. The UserBox scre en appears. Jobs th at have b een programm ed in use r boxes a ppear in or der fro[...]

6 6.3 Jo b Con trol Scr eens 6-20 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 To print a j ob from a user b ox 1 Select th e job tha t you wish to print fro m those progra mmed in us er boxes. 2 If the selecte d job is one stored in the memo ry, touch [Open Jo b]. 3 If the selected job is one tha t has been locked, u se the keypa d to ent er the fo[...]

6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-21 Controlli ng Jobs Chapter 6 Memory Recall Screen Past co py jobs c an be recall ed and pri nted agai n. Up to 4 9 past copy jobs are saved. If the n umber of copy j obs exce eds 49 or the memory becom es full, jobs are delet- ed, star ting from t he oldest . Delete d jobs cann ot be reca lled. Touch [[...]

6 6.3 Jo b Con trol Scr eens 6-22 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 ✎ Note If the co pier is tu rned off, al l saved job s are del eted and c an no longer be recalle d. If the “ Co py Trac k Mode ” pa ramet er on the “ Copy Track ” scre en is set to “ Yes ” , the Mem ory Recall j ob control screen can not be dis played. I f [...]

6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-23 Controlli ng Jobs Chapter 6 Touch [Basi c] to d isplay the Basic sc reen agai n. The f ollowing d etails of the jobs are displaye d. To recall a job from the mem ory 1 Select th e job that you wish to print from the mem ory. ❍ To recal l more tha n two jobs, repeat the above st ep until a ll jobs th[...]

6 6.3 Jo b Con trol Scr eens 6-24 CF 2002/CF3 102 Controlli ng Jobs Chapter 6[...]

Index Chapte r 7 7 7 Index[...]

7 7.1 I ndex 7-2 CF 2002/CF3 102 Index Chapte r 7 7.1 In dex A Accounts ... ................. ................ ................. ................. ................. .... 2-18 Auto pane l reset ... ................. ................. ................ ................. .......... 1-16 Auto pa per so urce se lecti on ............ ................. ...[...]

7.1 Index 7 CF2002/CF3 102 7- 3 Index Chapte r 7 Copy 1 set ..................... ................. ................. ................. ................. 2-16 Copy se tti ngs ....................... ................. ................. ................. ........... 5-20 Copy track ................ ................. ................ .................[...]

7 7.1 I ndex 7-4 CF 2002/CF3 102 Index Chapte r 7 J Job C ontrol sc reens ........ ................. ................. ................. ............... 6-1 0 Job Li st scre en ...................... ................. ................ ................. ............ 6-6 Jobs ........................... ................ ................. ............[...]

7.1 Index 7 CF2002/CF3 102 7- 5 Index Chapte r 7 Phot o Imag e set ting ....... ................. ................. ................. ......... 1-9 , 5-32 Photo/D ensity setting ..... ................. ................. ................. .................5-31 Postcard ........ ................ ................. ................. ................. .[...]

7 7.1 I ndex 7-6 CF 2002/CF3 102 Index Chapte r 7 T Test copies ..... ................. ................. ................. ................. ............... 2-1 6 Text & Pho to setting ... ................ ................. ................. ..............1-9 , 5-32 Text setting .... ................. ................. ................. ......[...]

2003. 01 4025770604 Copyright 2002 MINOLTA CO., LTD. MINOLTA CO., LTD. 3-13, 2-chome, Azuchi-Machi, Chuo-ku, Osaka. 541-8556, Japan The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers.[...]