Mitsubishi Electronics HC9000DW manual

HOME THEATER PROJECTOR This User Manual is important to you. Please read it bef ore using y our projector . MODEL HC9000D HC9000DW User Manual HC9000D HC9000DW[...]

EN-2 The ex clamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the applianc e. CA UTION RISK OF ELEC TRIC SHOCK DO NO T OPEN CA UTION: TO REDUCE THE RISK OF ELEC TRIC SHOCK, DO NOT REMOVE C OVER (OR BA CK ) NO USE[...]

EN-3 T rademark , Registered tr ademark SXRD TM is the trademark of Sony Corporation. HDMI, the HDMI logo and High-Denition Multimedia I nterface are trademarks or register ed trademarks of HDMI Licensing LL C. The “HD ready ” logo is a trademark of EIC T A. Other brand or product names are trademarks or register ed trademarks of their respe[...]

EN-4 Please read all these instructions regarding y our projector and retain them f or future refer ence. F ollow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated. 2. Retain instructions The safety and operating instructions should[...]

EN-5 W ARNING: Unplug immediately if there is something wr ong with your projector . Do not operate if smoke, str ange noise or odor comes out of your projector . I t might cause re or electric shock. I n this case, unplug immediately and contact your dealer . Never remov e the cabinet. This projector contains high v oltage circuitr y . An inadv[...]

EN-6 2 3 Checking accessories The follo wing accessories are provided with this pr ojector . Check to be sure that all of the ac cessories are packed in the package.  Cables Mini D-SUB 15-pin Mini D-SUB 15-pin D-SUB 9-pin D-SUB 9-pin Computer cable (PC013284299) RS-232C cable (PC013284199) • Used for projector con trol by computer .  P o[...]

EN-7 Pr eparing your projector (con tinued) Over view T erminal panel Control panel and Indicator 1 POWER button (ON/STANDBY) The status is changed between ON and STANDBY. 2 POWER indicator 3 A UT O POSITION/▲ button 4 HD MI /C OM PU TE R/ ◄ bu t to n 5 ▼button 6 STATUS indicator 7 MENU button 8 VIDEO/►button 9 ENTER button 1 Air exhaust gr[...]

EN-8 Remote contr ol 1 ON ( I ) button 2 HDMI2 button 3 HDMI1 button 4 C OMPONENT button 5 P .M. ME/MC USER buttons 6 ENTER button 7 MENU button 8 C ONTRAST button* 9 BRIGHTNESS button* 10 GAMMA button* 11 ZOOM/FOCUS button 12 LENS SHIFT button 13 COL OR MANAGEMENT button 14 COL OR button* 15 SHARPNESS button* 16 COL OR TEMP . button* 17 ASPEC T bu[...]

EN-9 Operational range of the r emote contr ol V er tical directions (ceiling mount) Reception angle V er tical directions When operating the remot e control, keep the distanc e from the remot e control to the projector via the scr een within about 5 m (15 feet). The operable range of the remote con trol, howev er , depends on the charac teristics [...]

EN-10 Setting up your pr ojec tor Setting up the screen Install the screen perpendicularly to the projector . If the screen can not be installed in such a way , adjust the projection angle of the projector . (See page 12.) • Install the screen and projector so that the projector’ s lens is placed at the same height and horizontal position of[...]

EN-11 Setting up your projector (continued) Screen size and pr ojec tion distance (continued) When the aspect ratio of the screen is Standard When the aspect ratio of the screen is Standard , the positional relation between the projected image and the screen is as shown on the right. Ref er to the following table for installation. When the aspect r[...]

EN-12 Adjusting the position of the pr ojec ted image T o adjust the position of the projected image on the screen, use the LENS SHIFT button. 1. Pr ess the LENS SHIFT button. • The LENS SHIFT menu appears at the cent er of the screen. 2. Pr ess the p , q , t or u button to move the image position. • When the q button is pressed , the ima[...]

EN-13 F ront pr ojec tion, ceiling mounting F or ceiling mounting, you need the ceiling mount kit designed for this projector . Ask a specialist for installation. F or details, consult your dealer . • The warranty on this projector does not cov er any damage caused by use of any non-r ecommended ceiling mount kit or installation of the ceiling[...]

EN-14 DVD player Video player Set-top box or digital tuner A. Connecting the projector to video equipment • When the projector and the connected devices are loca ted too close to each other , the projected image may be aected by their interference . • See the owner ’ s guide of each device for details about its c onnections. Pr epara[...]

EN-15 1. Connect one end of the optional video cable to the VIDEO IN terminal of the projector . 2. Connect the other end of the video cable to the video output terminal of the video equipment. • Also read the instruction manual of the equipment to be connected. • Contact your dealer f or details of connection. When a T V tuner or VCR is [...]

EN-16 Connecting to video equipment having a HDMI t erminal Y ou can projec t high-quality images by connecting the HDMI IN terminal of this projec tor to video equipment ha ving a HDMI output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data that are output from DVD pla yers. • Select HDMI[...]

EN-17 B. P lugging in the power c ord • In order to ensure the saf ety in case of trouble with the projector , use an elec trical outlet having an ear th leakage breaker to supply the pow er to the projector . If you do not have such outlet, ask your dealer t o install it. • The lens cap is for pr otecting the lens. If you leave the lens [...]

EN-18 1. Put the projector int o standby mode by pressing the main pow er switch. The POWER indicator lights up r ed. • If the projector was turned o before the lamp was c ooled down suciently last time, the lamp may not light up ev en when the POWER button is pressed . In this case, turn o the main power switch and wait for a while ([...]

EN-19 13. Press the POWER button on the pr ojector or the ST ANDBY button on the remot e control. • A conrmation message is displayed . • T o cancel the proc edure, leav e the projector for a while or press the MENU button. 14. Press the POWER button on the pr ojector or the ST ANDBY button on the remot e control again. • The?[...]

EN-20 Viewing video images (c ontinued) Setting the aspect ratio Y ou can change the aspec t ratio of the input video signal (or the ratio of width to heigh t of the image). Change the setting according t o the type of the input video signal. : Signal size : Image area • Bold frames are rec ommended modes. • When Aspect Ratio is set to AN[...]

EN-21 How to change the settings: With the r emote control: 1. Pr ess the ASPEC T button. • The screen f or selecting the aspec t ratio appears. 2. Select your desired aspect ratio by pressing the ASPECT button. • The aspect mode is switched between Standard, F ull Screen, Anamorphic1 and Anamorphic2. • Some modes are not available w[...]

EN-22 A. Connecting the projector to a comput er Pr eparation: • Make sure that the pow er of the projector and that of the computer are turned o . • When connecting the projector to a desktop comput er , disconnect the computer cables that are connected to the monit or . 1. Connect one end of the supplied Computer cable to the COMPUTE[...]

EN-23 1. Put the pr ojec tor into standby mode b y pressing the main power switch. The POWER indicator lights up r ed. • If the projector was turned of before the lamp was c ooled down suciently last time, the lamp may not light up ev en when the POWER button is pressed . In this case, turn o the main power switch and wait for a while (1[...]

EN-24 Viewing c omputer images (continued) 11. Press the LENS SHIFT button. The LENS SHIFT menu appears at the center of the scr een. 12. Press the p or q button t o adjust the ver tical position and t or u button to adjust the horizontal position of the displayed image . • When the projector cannot be positioned perpendicularly to the screen,[...]

EN-25 V iewing 3D images Y ou can enjoy the 3D fun when you watch 3D movies with 3D Glasses . The 3D Glasses and 3D Emitter shall be purchased individually; to view 3D images, the special 3D Glasses (EY -3DGS-1U) and 3D Emitter (EY -3D -EMT1) must be purchased . Before use , it is necessar y to read the user manual of the 3D Glasses and 3D Emitter [...]

EN-26 • About glasses(Liquid Crystal Shutter) • Do not press the glasses too hard; and also do not fall on or bend them. • Do not scratch the surface of the glasses with anything sharp . • About infra-red tr ansmission • Do not contaminate the infra-r ed transmission and do not apply anything on it, because it makes the 3D [...]

EN-27 • Placing the 3D Emitter in an arbitrary place V iewing 3D images (continued) Pr eparation: T ur n o the power of the pr ojector . 1. Put the Infra-red tr ansmission par t of the 3D Emitter into the base part. 2. Secure temporarily the 3D Emitter in an arbitrary place (such as the wall around the scr een). 3. C onnect the 3D emitter t[...]

EN-28 V iewing 3D images (continued) 3D images viewing This unit can con ver t the broadcast and signal input of the f ollowing 3D images into the three- dimensional image viewing,(starting from November ,2010) •F orthe3DimagesconnectedwithHDMIinput1or2,itcorrespondswiththe3Dimagesinputfrom[...]

EN-29 V iewing 3D images (continued) Switch the viewing methods of the 3D images (3D bright or dark adjustment, 3D S ync adjustment). Change the 3D image brightness to make the images better . Also , when you do not feel right when viewing the 3D images, the left and right of the 3D images may not align with the left and right switch of the glasses[...]

EN-30 Menu operation • Some menu items can ’t be operated or displa yed depending on the input signal or signal format . H igh Bright 7500 K 2 .2 7 .5 IRE 0 IRE 3. 75I R E Pic t ure1 Gam m a C orrec t ion Bright nes s C olor T int Sharpnes s Bright nes s C inem a 2 .0 2 .1(Video ) Set up Lev el 3D U s er R ed Blue M ov ie C inem a F ilt er 9[...]

EN-31 Menu operation (continued) • Some menu items can ’t be operated or displa yed depending on the input signal or signal format . C us t om2 LT I Lev el Projec t ion CTI L e vel Vert ic al Key s t one Projec t ion Applic at ion H oriz ont al Key s t one R ot at ion Key s t one Any plac e H igh Of f Low 99% 100% T op Lef t 98 % 97 % Any pl[...]

EN-32 Menu operation (continued) • Some menu items can ’t be operated or displa yed depending on the input signal or signal format . St andard As pec t R at io Sc reen 3 Phas e C loc k Enhanc ed 2D / 3 D Aut o Vert . Blue St andard R GB I nput Vert . R ed H oriz . Blue I nput Anam ophic 1 F ull Sc reen H oriz ont al Pos it ion Shut t er Anam[...]

EN-33 Menu operation (continued) • Some menu items can ’t be operated or displa yed depending on the input signal or signal format . I nput R es olut ion I nf o Lam p H ours C ent er M enu Pos it ion Setup T op Lef t T op R ight Bot t om Lef t Bot t om R ight Language 日本語 Englis h Es pañol De u tsch F ranç ais I t aliano 中文 한?[...]

EN-34 How to set the menus: 2. The follo wing describes how to set O T imer time as an example. 1. Pr ess the MENU button. 2. Pr ess the t or u button to select Setup menu to use. 3. Pr ess the ENTER button (or q button). 1. Picture 1 menu ITEM SET TING FUNC TION Picture Mode Cinema This is a mode for wa tching movies in dim lighting as in a the[...]

EN-35 2. Picture 2 menu ITEM SET TING FUNC TION Cinema Mode 3 Options Use to adjust the select Movie mode. TNR 4 Options Use to r educe random noise. (See page 41.) MNR 4 Options Use to reduc e mosquito noise. (See page 41.) BAR O/On Use to reduce block noise. (See page 38.) Detail Enhancement 4 Options This function is to emphasize the outline [...]

EN-36 4. Screen menu Menu operation (continued) 4. Screen menu ITEM SET TING FUNC TION Aspect Ratio Standard Select to project images with an aspec t ratio of Standard . F ull Screen Select to project images with an aspec t ratio of F ull S creen Anamorphic1 Theverticalimageenlargesto2.35*(9/16)totthecinema[...]

EN-37 5. Input menu 6. Setup menu • When the lamp mode is switched, the pr ojected image may icker . T his is not a product malfunc tion. • Do not change the setting of Lamp Mode frequently . • It may take a little while to carr y out Reset All in the Setup menu. Menu operation (continued) 5. Input menu ITEM SET TING FUNC TION Inp[...]

EN-38 7. Info menu Menu operation (continued) 7. Info menu ITEM DESCRIPTION Input Resolution Indicates the name of the t erminal to which the currently projected video signal is being input. Lamp Hours This item shows a lamp operating time (hour). • TheLampHoursiscalculatedbasedonthatLampModeisNormal.[...]

EN-39 Picture Mode Y ou can select the most suitable setting to the images you watch. Select Picture Mode in the Picture 1 menu. Cinema This is a mode for wat ching movies in dim lighting as in a theater . VIDEO This is a standard mode suitable f or watching video images, etc . 3D This is a mode f or watching 3D F ilm. Dynamic This is a bright mode[...]

EN-40 T o adjust the tone of white (C olor T emp.): Y ou can selec t a preset color temperatur e (white tone) using the menu. (See page 34 for menu setting.) 1. Display the Picture 1 menu . 2. Select Color T emp. b y pressing the p or q button. 3. Select your desired color temperatur e by pressing the t or u button. The color tempera ture of each o[...]

EN-41 Adjusting pr ojec ted images (con tinued) T o adjust the ratio of change in brightness (Gamma Correction): Y ou can selec t a preset Gamma Correction using the menu. (See page 34 for menu setting.) 1. Display the Picture 1 menu . 2. Select G amma Correction by pressing the p or q butt on. 3. Select your desired Gamma Correction by pressing th[...]

EN-42 Adjusting pr ojec ted images (con tinued) T o adjust the 3D Brightness: Y ou can adjust the 3D Br ightness of the projected image using the menu. This menu is available only in 3D mode. (See page 37 for menu setting.) 1. Display the Input menu. 2. Pr ess the p or q button to select 3D Brightness. 3. Pr ess the ENTER button. 4. Pr ess the p or[...]

EN-43 This projector automatically and pr operly projects video signals supplied from the computer . However , some video signals may not be projected, depending on the type of the computer . I n such a case, Use the A uto Position function to (See page 24.) adjust the projected image using the Input menu. How to adjust the image supplied fr om the[...]

EN-44 This projector is equipped with a lamp to pr ojec t images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, r eplace the lamp with a new one as soon as possible. Be sure to r eplace the lamp with a new lamp sold separately that is ex clusive to this projector . Contact your dealer f or purc[...]

EN-45 Replacing the lamp (continued) T o replace the lamp: 1. T ur n o the main power switch and unplug the power cor d. 2. Loosen 2 screw s (a) using a Phillips screwdriver (+) and remov e the rear side Lamp cover (b) fr om the projector . 3. Loosen 2 screw s (c) using a Phillips screwdriver (+). 4. Pull the handle . 5. Pull out the lamp bo x b[...]

EN-46 1. T ur n o the main power switch and unplug the power cor d. 2. Loosen 2 screw s using a Phillips screwdriver (+) and remov e the rear side Lamp cover fr om projector , hang it well under the projector . 3. Loosen the screw s using using a Phillips screwdriv er (+). 4. Attach the lamp replac ement tray to the projector as shown in the [...]

EN-47 Maintenance Impor tant: • If the lter is damaged or becomes extremely dirt y , change it with a new lter . Contact your dealer for a new lter . • Use the dedicated lter only . Caution: Be sure to use the projector with an air-lt er . If not, dust may get inside the projector causing reand failur e. Cleaning of the [...]

EN-48 Before asking for repair of the pr ojector , check the following . If the symptom persists, stop using the projector , be sure to unplug the pow er plug, and then contact your dealer . No image appears on the screen. Pr oblem Solution P ower can not be turned on. • Check whether the indicators are on or o and ho w they are lightning. [...]

EN-49 No image appears on the screen. (continued) Pr oblem Solution “NO SIGNAL ” is displayed . • T ur n on the power of the connected device , or check whether there is something wrong with the connected device . • Check whether the external device output signals. ( Check this especially when the external device is a notebook compute[...]

EN-50 Others Pr oblem Solution The exhaust vents emit warm air . • This air comes out after cooling the inside of the projector . Y ou may feel hot, but this is not a malfunction. The menu can ’t be used. • The microcomput ers inside the projector may be wrongly operating because of noise . J T ur n o the main power , wait about 10 m[...]

EN-51 T roubleshooting (con tinued) Others (continued) Pr oblem Solution Images are not 3D . ※ The 3D emitter and 3D Glasses are sold separately . They are not supplied with this product. • Are the image settings switched to 3D mode? → Switch the mode to 3D mode . • Is there any block in the communication area between the 3D Emitter a[...]

EN-52 POWER indicator ST ATUS indicator Indicators This projector has two indicators , each of which shows the operation condition of the pr ojector . The follo wing oer solutions to possible problems . If these problem persist, turn the projector o and consult your dealer . Normal condition POWER ST A TUS CONDITION NOTE Steady red O Stand[...]

EN-53 The specications and outside appearance of the pr ojector are subject to change without prior notice. T ype HOME THEA TER PROJEC TOR Model HC77-80D/HC77-80DW Display technology 0.61 inch SXRD™ panel: 3 pieces (for R, G, B) (aspect ratio 16:9) Pix el: 1920 x 1080 = 2073600 pixels T otal 6220800 pixels Pr ojec tion lens F 3.2 - 3.9 f = 21.[...]

EN-54 Specications (continued) Specication of input signals in each input of the projector HDMI Signal mode Resolution (H x V ) Horizontal frequency (kHz) V er tical frequency (Hz) Normal mode (H x V )*1 480i60.00Hz(Double Rate) - 15.75 60.00 1440x1080 480i59.94Hz(Double Rate) - 15.73 59.94 1440x1080 576i50.00Hz(Double Rate) - 15.63 50.00 144[...]

EN-55 *1 This mode shows the displa y area when Aspect Ratio in the Screen menu is set to Standard . Impor tant: • Some computers aren ’t compatible with the projector . • The projector’ s maximum resolution is 1920 x 1080 pixels . I t may not display images of higher resolutions than 1920 x 1080 correctly . • If the resolution a[...]

EN-56 Specications (continued) Connectors SERIAL (D-SUB 9-pin) Pin No. Name I/O 1 GND – 2 RXD IN 3 TXD OUT 4 GND – 5 GND – 6 GND – 7 – – 8 – – 9 GND – COMPUTER IN (Mini D -SUB 15-pin) Pin No. Spec. 1 R(RED)/P R /C R 2 G(GREEN)/Y 3 B(BLUE)/P B /C B 4 - 5 GND 6 GND 7 GND 8 GND 9 5V 10 GND 11 - 12 - 13 HS 14 VS 15 - HDMI IN (HDMI [...]

1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M IT SUBIS HI ELECTRIC CORPORA TIO N A[...]